Also to consider with truly portable hard drives (the new ones that power
from your computer instead of plugging into the wall) is that they require
TWO USB ports to obtain enough power on most laptops.
That said I have two portables the traditional plug into the wall type and a
new Power from
Before buying anything, check whether your scanner creates temptorary
files during scanning and never deletes them. I've used a Visioneer One
Touch scanner that creates a 25MB or larger temporary file in C:\Documents
and Settings\your-user-id\Local Settings\Temp\OneTouch for each page
scanned -
Is anyone running Legacy on one of the new iMacs? I would love to return to
a Mac, but the last time I tried, my genealogy software still ran
slugglishly. I understand that with the new processors, this is no longer
true. If you have anything to share on this topic, would you please contact
me
I use Legacy on my macbook. However, it's a bit of a fancy setup: I
installed Vista Home Basic on a boot camp partition, and run Vista
inside VMware Fusion. I run both Legacy/Vista and my mac programs
simultaneously; both can access the same files, etc. The same setup
should work for any
Just a small minority of Legacy users run the program on a Mac. The only
issue reported so far was that Legacy had frozen so badly that the only
way to get out of it is to shut down the Mac. However, when the user
rebooted her computer, it took her to restore which unfortunately
always came right
I've run Legacy using Virtual PC on my Mac and yes it is a little slower
than my PC however I have been told that running PC programs on an Intel Mac
using Parallels they run at the same speed.
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
On May 12, 2008, at 11:14 AM, philip thorne wrote:
I've run Legacy using Virtual PC on my Mac and yes it is a little
slower than my PC however I have been told that running PC programs
on an Intel Mac using Parallels they run at the same speed.
I've done both. I found running Legacy
I've never had that problem. Just the scanned ones are saved. I've used
a cannon portable scanner (Awesome for places that have no power close
by)and also have a epson visioneer. Niether does what you claim.
-Tim
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
So, based on the Legacy News I just received there will be no release of
Legacy v7 to the general public this week.
Seems that anyone attending NGS in the States will be allowed to get a
pre-release at the show.
I find this a little annoying (to say the least). Not that Legacy isn't
going to be
Being the first one on the block with something new isn't what I'm hankerin'
for, so, though I live in the US, I just don't see this as a big deal. Sure,
I'll be glad to have a new and improved Legacy. But a few weeks one way or
the other doesn't change the big picture much. Most of you are
Keith,
It is not as great a deal as you think. Distances in the
States are on the large side. Going from New York City to San
Francisco (east to west) is a 43 hour drive and covers 2,909 miles.
Going from New Orleans to Minneapolis (south to north) is an 18 hour
drive and covers 1,200
Yes, I have no intention of travelling the 1100 miles to Kansas from where I
live. It would have been nice if those who actually owned the Legacy program
could have had first dibs.
Sorry, to be such a spoiled sport but we've all been waiting quite excitedly
for some time for this version and
Elizabeth,
To me, it's not about getting something new. It's about thinking that when
the Millenia cruisers stepped on dry land last fall Version 7 would be
released. It's also about red herrings along the way so that expectations
are raised and lowered almost with the same frequency as ships in
So, based on the Legacy News I just received there will be no release of
Legacy v7 to the general public this week.
Seems that anyone attending NGS in the States will be allowed to get a
pre-release at the show.
I find this a little annoying (to say the least). Not that Legacy isn't
going to be
Just driving from Denver, Colorado to Kansas City (only across Kansas) is about an 8 hour trip. Minneapolis to Kansas City we allow 7 hours. But then we usually lay over an hour to do some shopping at lunch halfway. It's actually a 6 hour trip.Fortunately for me, this time, I live 45 mins to 1
Friends:
I have to agree with Elizabeth on this one.
I am fairly new to Legacy; but I can't for the life of me see what all the fuss
is about re the version 7?
You guys and gasl scream loud when there is too much mail or when one of us
newer people ask what you consider a primitaive
Thanks, John, for the tip on temp files. I will check it out. I am using a
newer Dell laptop, so I think a Portable Drive will be my best bet. I don't
know if I have the stamina to complete this project, however, it is very
time-consuming.
I am making multi-tiff files for archiving purposes, then
I agree.
How about making the pre-release available to paying customers for download?
Margaret
Nancy wrote:
Yes, I have no intention of travelling the 1100 miles to Kansas from
where I live. It would have been nice if those who actually owned the
Legacy program could have had first dibs.
Here's my take on this..
1) get 2 external drives. Download the latest version of Legacy to the hard
drives. Intellishare mark you data files. Copy all photos, scanned
document files and files etc to the hard drives. Continue to keep the data
on the computer, but update to the hard
Hello Keith,
Well said.
Legacy is very much US centric.
Even the time mentions when we got those by
annoying 60 messages, times were NOT quoted in GMT or Zulu time.
Pacific Time or any other US centric time zone means nothing to Europeans.
Yes, the UK's major show over the Bank Holiday
Another lesson in patience - RELAX. Let's consider this topic as completed
until we hear official release news.
Carol
**Wondering what's for Dinner Tonight? Get new twists on family
favorites at AOL Food.
(http://food.aol.com/dinner-tonight?NCID=aolfod000301)
Tim Rosenlof wrote:
I've never had that problem. Just the scanned ones are saved. I've used
a cannon portable scanner (Awesome for places that have no power close
by)and also have a epson visioneer. Niether does what you claim.
-Tim
My Lexmark does.
--
Gene Y.
n2kvs
Researching Young, Zies,
Subject: Re: [LegacyUG] Legacy on Portable Hard Drive
You can get a pcmcia card with 2 usb 2.0 ports for those with 1.1
-Tim
If you're using a laptop, an external drive is usually the
easiest option. If it's an older laptop with USB 1.X ports
(instead of the newer USB 2.0), the
Note that this is a pre-release version that is being released at NGS. So
there could still be some hiccups in the code. If I remember right, this is
typical software process:
Alpha - internal testers
Beta - a few small number of external testers
pre-release - a larger but still controlled
While I feel mildly frustrated that the users will not see the program
first, I do recognize that NGS is one of the most important genealogy
conferences in the U.S. Legacy needs to make this year's conference, and if
it were released to all of us at the same time, there would very likely be
all
Folks,
Pleasecalm down. I, too, am anxiously awaiting v7, but I can also
understand what Legacy is doing. To be a profitable and on-going company,
they
must market the product to new customers. Offering v7 at the conference is a
way of attracting new users, which the company must do
The National Genealogical Society conference, to be held in KC, MO, this
week. I would have been there, but have a conflict.
Janis
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of bruce
Sent: Monday, May 12, 2008 3:35 PM
To:
Read the press release available through Legacy via the Legacy Home tab.
This does not appear to be the full version.
Elizabeth
researching the descendants of William and Sarah (Patterson) Thompson
From: Markie Flint Blackmon
How about making the pre-release available to paying customers
On the setup for Family Sheet, click report options middle button, bottom
of box. The select include and part way down the left column is 'include
extra blank children', you can choose how many you want.
Note when I just tried this the preview only showed death and burial slots
for the extra
I don't disagree with buying an external hard drive for backup. My first
purchase (and cheapest) would be a 2nd internal hard drive for your
computer. I have two hard drives on mine, the second holds all My
documents with data files.
G.C.
-Original Message-
From: [EMAIL PROTECTED]
I have searched the archive a bit, but I'm not finding this.
I would like to print family group sheets, that include all the children
that could fit on a page, even if I only have one child so far. That is, I'd
like blank slots printed on the rest of the page. How do I do this??
Legacy User
Why would you want to sell a possible buggy new version to a new customer
rather than trust those who've been working with version 6 to test it out?
If I just bought a new program and started having trouble with it, I would
have doubts about it.
Nancy
- Original Message -
From:
How can I keep the RINs on the Family Group Sheet, but not the MRINs?
Please help me - I am preparing a gift for a presentation, due in a couple
of days!
Thank you,
Dee
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
Go to Report Options Include; about 1/2 way down on the left side is a
place to change the number of Extra blank children. (My children, of
which there are 2, only looked extra blank when I told them to clean their
room, but yours may be different.)
Elizabeth
researching the descendants of
Just received this.
A new update to Legacy Charting Pre-Release edition is now available for free
download. Below is a list of the new additions and minor fixes.
New
* Added the ability to display the Prefix and Suffix fields for names
* Added DPI control for exported file types
True, that is why it is called a pre-release.
That said however, it seems it would behoove Legacy to make this pre-release
available for download at Conference opening. That might get them new customers
and help retain some current owners who are getting fed-up with this
neverending mantra of
Gee that's a pity have day free BUT IN AUSTRALIA, what are we lepers, would
it have been too much to think the faithful would get the opportunity to
purchase the pre-release version, I for one (1) would have.
I know it's the old keep em in the dark and feed em
But still like the
NGS is the National Genealogical Society in the US
http://www.ngsgenealogy.org/ . NGS has their national conference in
various cities, trying to accomodate most of the people - but the US is a
big place...
One of the online vendors (http://www.funstuffforgenealogists.com/ ) had a
contest for
Dee,
I don't think that is possible, but one work around would be to make the UserID
the same as the RIN and display those. You could even put RIN infront of it if
you wished; see OptionsCustomiseOthers.
Ron Ferguson
_
New
I get room for the name, birth, christened, died, and buried fields;
five fields for every child. We must have something different.
Robert
Margaret Couch wrote:
On the setup for Family Sheet, click report options middle button, bottom
of box. The select include and part way down the left
I've read it:
In fact, Legacy 7.0 will be available for purchase as a special
pre-release edition. You will be the first to try out Legacy 7.0's new
mapping, sourcing, and wall charting features (lots of other new
features too - to be announced soon). This special pre-release edition
is only
I also want to wish the Millennium folk the best of luck attracting new
Legacy users with the pre-release of V.7 at the NGS this week.
Having invested six years of work in my own Legacy Deluxe database, I
feel like I have a stake in the long term future of the company, so I'm
perfectly
Hi Mike,
Have you closed and reopened Legacy Charting? A new update doesn't
appear immediately in Legacy or Legacy Charting. I'm not sure how
often the programs check for an update apart from at Startup.
If it still isn't there, I'd suggest there is something wrong with
your installation
7.0.096 Legacy Chart
1) Is there a way to force a chart type to be reset to the original defaults
ie Font Size, what gets displayed etc.)
vs always using what the last parameters that a chart was using?
a reset to defaults button to click would be prefered, if not pressed
use last settings
At this point, I'm about as frustrated as I can be and that's a lot. I
transferred 63,000 names from Rootsweb to Legacy about a month ago. My Rootsweb
database represented 8 years of diligent research. Apart from some small
glitches, the transfer went fairly well... I thought.
Today, I
Legacy isn't looking for new customers but for more testers.
Think about the people who attend any national genealogy meeting - they're
paying to be there, so they are very serious about genealogy. Some of
those serious people already use Legacy and would love to have the
not-ready-for-primetime
I just checked and the installed version on my PC is 7.0.094. Even though
the Messages show the new update of 7.0.093 with a date of 12 May, the
automatic update in the software doesn't see the online file as a new
version. Looks like there was a slip-up in the version numbering -
probably too
Why would you want a partial upgrade? And I don't know about the
neverending mantra of soon. I've been on this list since January and have
yet to hear anyone from Millenia suggest any sort of time frame, certainly
not a mantra nor soon.
Elizabeth
researching the descendants of William and
I have been lurking on the archives and reading the news for many months and
just decided to jump in. From my perspective the Legacy folks need to stop
playing mind games with the LUG and put up or shut up. Soon does not get
it after 10 months. I am ready to move on to FTM 2008 or even TMG 7.
7.0.0.96 Legacy Chart
1) Should there be a check to only allow legal DPI levels to be typed
in??
2) If during Export To File an error occurs
(ie Illegal File Name, DPI to Large, etc.)
you should be kicked back to the EXPORT To File Menu after the error
message is displayed and cleared.
We will begin shipping the promised upgrades (those who purchased Legacy
between July 1, 2007 and the present) next week. Our hope is to make Legacy
7.0 available from our website by the beginning of June. We are, of course,
really excited about it, and know that you're really anxious for it too.
Reg,
I have e-mailed you personally twice now about the Brisbane User Group you
suggested and still have not had a reply.
Don't you answer e-mails addressed to you personally?
Colin in Brisbane.
- Original Message -
From: Reg SHERLOCK
To: LegacyUserGroup@legacyfamilytree.com
Good luck,
I have found out that it is always best to back up files and I have also
started using Microsoft One Note to organize notes, etc on each line of my tree.
Whenever I put something in the notes section I also copy it on my hard drive
under my documents and then also copy them into One
Please... PLEASE.. if you must choose FTM 2008 or TMG7 then go with TMG7.
Your sanity will thank you later!
- Original Message
From: G OLIVE [EMAIL PROTECTED]
To: LegacyUserGroup@legacyfamilytree.com
Sent: Monday, May 12, 2008 7:26:08 PM
Subject: Re: [LegacyUG] No Legacy v7 this week
If you purchased the download-only Legacy, then you will also receive the
download-only Legacy 7. Otherwise you will receive the CD and new printed
manual.
Thanks,
Geoff Rasmussen
Millennia Corporation
[EMAIL PROTECTED]
www.LegacyFamilyTree.com
From: [EMAIL PROTECTED]
[mailto:[EMAIL
Hi Legacy Users,
The software is mostly ready. We are trying hard to finish a couple items and
fix a few problems. Because we are working so hard on Legacy right now we
haven't had time to work on the required website changes that would be needed
for a pre-release for all of you on the
For a laptop?
--
JL
JLog - simple computer technology for genealogists
http://www3.telus.net/Jgen/jlog.html
G. C. Oliver wrote:
I don't disagree with buying an external hard drive for backup. My first
purchase (and cheapest) would be a 2nd internal hard drive for your
computer. I have two hard
That was my thinking as well; seems to me the very last people you would want
using pre-release software would be Fellows of the NGS - one or two negative
remarks from such a person could do major harm to a company's reputation !
- Original Message
From: Nancy [EMAIL PROTECTED]
To:
at the
conference - maybe a couple of Fellows! Good luck out there next week, Legacy!
Janis Walker Gilmore
__ NOD32 3094 (20080512) Information __
This message was checked by NOD32 antivirus system.
http://www.eset.com
Legacy User Group guidelines
Cathy,
Legacy Charting 7.0.094 was released as an update a few weeks ago. Those of
us with that update blind the upgrade code from installing 7.0.093 since it
is a lower release number.
Bill
Bill Bienia, PLCGS
www.CobblestoneLegacies.com
-Original Message-
From: [EMAIL PROTECTED]
60 matches
Mail list logo