Re: [LegacyUG] Source Citation Report

--- Original Message ----- From: "Bob Janice" To: Sent: Sunday, September 27, 2009 4:30 PM Subject: Re: [LegacyUG] Source Citation Report I don't believe that is true. I only have Master Sources - I do not ever fill in the information on the source detail (an avowed splitter).

Re: [LegacyUG] Source Citation Report

source detail file ID" - ALL of my FID's are printed in the report. Jenny M Benson wrote: Bob Janice wrote Look on the "Options" tab for the report - check the appropriate box. Just tried it and the File ID is included just fine. That's only for Source Detail File

Re: [LegacyUG] Source Citation Report

Look on the "Options" tab for the report - check the appropriate box. Just tried it and the File ID is included just fine. Ruth Nerud wrote: I am trying to print a Source Citation Report that has the file ID and then the Master Source but I only get a list of the Master Sources, no file ID.

Re: [LegacyUG] Will legacy gedcoms cross OS platforms?

A GEDCOM file is simply a text file. It should work on all OS's. Kathy Shiell-Stokes wrote: Will a legacy created gedcom work on a MAC? Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfam

Re: [LegacyUG] Cannot unsubscribe

Just tried the website now. Got on with no problems. Perhaps they were doing work on it earlier. noddie wrote: Hi Has anyone had trouble getting onto the website for Family Tree today. I have tried numerous times and cannot subscribe or even get onto the website. Thanks for any replies.

Re: [LegacyUG] question about charting

Works fine for me. Have already ordered several of them directly through the program. Maybe you need to upgrade to the latest version. Michele Lewis wrote: I thought you could order charts from right within the charting program but when I tried it it says not available, future update. miche

Re: [LegacyUG] Burial Address

Go to: View -> Master Lists -> Address Lists -> Event There is no tab called Master. 1familytree wrote: CE, I use Legacy Deluxe, I do not see any tab called Master. If you are referring to View>Master Lists> Event> That only brings up a listing of events, and does not list the persons who h

Re: [LegacyUG] Geo locations

England and Canada are already in mine . . . . . Bob ci...@treadles.ca wrote: Are there any plans to put Canada and Britain in the Geo Location thingie? It sure would be a big help - or is the USA the only country that matters? Helen Legacy User Group guidelines: http://www.LegacyFami

Re: [LegacyUG] Margaret Married Someone

Marie, Go to "Options" -> "Customize" -> "View" -> and click on the box in the upper right corner that says "Edit Default Marriage Wording". You can make any changes and/or deletions on the next screen. Bob [EMAIL PROTECTED] wrote: Ron, I would like to delete these phrases but I must be

Re: [LegacyUG] Legacy Charting Background Pictures

Look directly underneath the "preview" picture when you have the background picture choice box open. It is a clickable link. Bob Judy Wardlaw wrote: From the Legacy Charting update 7.0.120, it is stated that there is a new link on the Background Options to access additional backgrounds onli

Re: [LegacyUG] web pages

Hi Michele, You can take a look at www.janicefamily.net. All of the pages (except the main page) were done with Legacy. Bob Michele Lewis wrote: I am sitting here playing around with the creating web pages function. I do like how you can preview how it will look before it uploads. If y

Re: [LegacyUG] AniMap for World Maps

Christina, Try here: http://www.fer3.com/centennia.html Bob Christina wrote: Is there any map program, similar to Animaps, to locate Europe border changes through the years? -- - Christina Hruška --And the Dragon Grins... Legacy User Group guidelines: http://www.LegacyFamilyTree.com

Re: [LegacyUG] Picture Setting Tab

Chick, Click "Insert" on the menu bar. Then choose "Picture". The Picture Setting Tab will then appear. I don't think this will help you with question though . . . Bob Chick Lewis wrote: According to Legacy Charting Help System, there is a "Picture Setting Tab" on the Charting Ribbon th

Re: [LegacyUG] Lack of icons

I believe it is a function of your screen resolution. If I run my monitor at 1280x1024 I can only fit ten icons under each person on the family screen. If I change the resolution to a higher one I can get all eleven ones appearing. Bob [EMAIL PROTECTED] wrote: Mike, I don't know. I jus

Re: [LegacyUG] report run-time error

Bernard, Try here: http://www.legacyfamilytree.com/helpDLL-OCXerrors.asp Bob Bernard Doddema wrote: I've been trying to preview the interview report and get the following error: Run-time error '339': Component 'MSCOMCTL.OCX' or one of its dependencies not correctly registered;

Re: [LegacyUG] IGI Search

Keith, Just tried it - no problems here . . . Bob GeoSci wrote: Anyone else having a problem with the Search feature in Legacy being unable to sign in to the IGI? Worked fine yesterday - but would like to continue - and keep getting "There was a problem signing into familysearch.org" -- yet

Re: [LegacyUG] File names format

Not true. Windows is perfectly happy to use filenames that contain spaces. Most of the pictures that I have attached to people, events, sources, etc. in Legacy contain spaces. For example, I routinely use file names of the type "Bob Janice - Birth Certificate.jpg". Windows and L

Re: [LegacyUG] marriage status

Running Legacy 7 (latest update) . . . Divorce shows up as it always has on my system. Bob Elsie Saar wrote: In Legacy 6, if a couple's marriage status was divorced, "divorce" would show on the marriage information line on the family view. I don't see "divorce" showing in the same place in L

Re: [LegacyUG] To-Do Problem

Carol, Just tried creating a new to-do item from the individuals screen. I was able to create it, edit it, and finally delete it without any problems what-so-ever. It works fine on my machine. I know this doesn't help you solve your problem but at least you now know that the to-do creation

Re: [LegacyUG] Descendant Web Page Creation

Ron, Thanks for the reply. At least I know that the program is generating the pages correctly for you. Now to do some more investigating and try to figure out where I may have messed up . . . Bob ronald ferguson wrote: Bob, Have just tried Internet>Create Webpages. Selected all defaults

[LegacyUG] Descendant Web Page Creation

I was going to update my family web pages today and ran into a slight problem. I am using Legacy 7 Deluxe (latest build - 7.0.0.53) and created the web pages (Descendant Style) in my usual way. I checked off the boxes to create a surname index and a name list. To my surprise both the surname in

Re: [LegacyUG] Spell-checking in Legacy

seen. Bob Meg Greenwood wrote: Bob - "Dew knot trussed yore spell-chequer". Does the spell checker recognize : eMail, GB, 'net, jpg, FHC and the like ? Can you teach it these 'knew' words ??? Meg Greenwood / Oklahoma == Bob Janice wrote: Allen,

Re: [LegacyUG] Spelling Checker in Sources Legacy 7 BOMBS

Allen, Works fine for me - just spell checked the general notes that I have for my mother with no problems. Bob Allen Prunty wrote: I always put the complete obituary text in the optional notes of ever obituary in my file. I clicked on the spelling checker and get error -7 out of memory.

Re: [LegacyUG] Searcxh Results v7

Graham, Tried to duplicate what you got using the steps you outlined. Unfortunately (or fortunately!) I could not duplicate your results. I got the correct list of individuals which where missing a marriage date along with their correct names. Bob Graham Mason wrote: Could someone try th

Re: [LegacyUG] IE7 Required (Trouble)

Well said Jay . . . . Bob Jay S. Van Zeeland wrote: Mr. Wynthner Have a very happy Weekend!. . . I am just hoping to add some happiness to your otherwise (what must be)miserable existence. We have not seen a single post that didn't involve complaining from you for the last two weeks. You h

Re: [LegacyUG] IE7 Required (Trouble)

Are you using Legacy 6 now? Do you make use of the "Legacy Home" tab to view the Legacy News items?? Wynthner wrote: IMHO, Legacy requiring IE7 for certain functions is the biggest blunder by a software company since Ancestry introduced FTM2008! It *will* act as a factor limiting sales, I k

Re: [LegacyUG] Re tiff format

I use TIF format almost exclusively for the images I attach in Legacy (census, scans of documents, photographs, etc.). Most of these files are way over 200KB - in fact they are all in the 3-5 MB range. I have never had a problem with Legacy handling, saving, or displaying these images. The

Re: [LegacyUG] First wife

see http://www.legacyfamilytree.com/Help.asp#SolutionsByNumber Bob Valerie Garton wrote: I did a check/repair and got this error message: Error re-building deleted marriage list. Error 3021: No current record etc 1. I do not know what to do about this is ? 2. To do the unlinking

Re: [LegacyUG] Adding correct city to "Location" field

Hi Nigel, I think I would just enter "Registration District of Epsom" in the "in" field for the born field on the Individual Information screen. I would then click the "+" symbol to the extreme right and click on "Birth Notes". I would add any notes explaining the uncertainty of this locati

Re: [LegacyUG] RIN Numbers

1. Click "Help" 2. Search on keyword "RIN" 3. Choose "RIN numbers on Names" 4. Click "Display" Bob [EMAIL PROTECTED] wrote: I remember putting RIN numbers next to names, but I cannot find how to do it again. Should one keep a template with the customized options, so you don't have to chang

Re: [LegacyUG] Run time error360

http://www.legacyfamilytree.com/helpError380.asp Bob [EMAIL PROTECTED] wrote: I upgraded to Deluxe Version 6 some time ago but now keep on getting run-time error 380. I think I have the latest version but can you help? - Email sent from www.virginmedi

Re: [LegacyUG] Backup problem fixed

Backup creation working fine here also. Using the latest (6.0.0.188) version. Bob Ken Carkeet wrote: Greetings! There is definitely a problem with the latest Legacy update (6.0.0.188). I have been trying all afternoon to get Legacy to create backup family files without success. No matter wh

Re: [LegacyUG] Fwd: Build 6.0.188 - Not holding the "excluded from problems - child born after 20 ye

see: http://www.legacyfamilytree.com/helpError380.asp Bob George Davidson wrote: I just run the latest Legacy Update 600.188 and now the program won’t open, get an error: Run Time Error 380, Invalid property value. Any suggestions on what to do rather than a full uninstall and reinstall? T

Re: [LegacyUG] Sources

wants is to be able to do is link multiple facts to one *detail*. So, yes, there is only one copy of the source in your database, but each *detail* is treated individually, even if the source AND *detail* are identical to a 100 others. Lee On Dec 29, 2007 12:29 PM, Bob Janice <[EMAIL PROTEC

Re: [LegacyUG] Sources

Gail - I'm a little confused by your statement "every time we attach a single source to all these different places, it adds an extra identical copy of that exact same source in the database". I also use a single source, i.e. death certificate, to source several different facts and/or events -

Re: [LegacyUG] Individual's Information Screen

Ruth, Options -> Customize -> Colors . . . . look in the middle of the screen for the line that begins "Text Colors:". Click the "Contents" box and choose the color that you want the sourced field names to be. Note that the chosen color will show on the "Individual's Information" screen and

Re: [LegacyUG] Tagging from Name list possible

Double-click one of the "tag columns" that show just to the right of the name in the list. Bob Pat Hickin wrote: I thought I remembered being able to tag people individually from the name list, but I don't seem to be able to do it today. And I can't find anything in Help to indicate that it

Re: [LegacyUG] Published a book using Legacy (long)

Excellent information about putting all the elements together for a book. I'm sure all of your family will be thrilled. Thanks for sharing it all . . . Bob Susan Daily wrote: I just received from the printer two copies of the paperback version of my first published family history book. I w

Re: [LegacyUG] Attaching images to the file

Yes - I have always attached images to people, places, and events. It makes for a much nicer presentation when publishing web pages and/or reports. The time spent would be very worthwhile. Bob Michele Lewis wrote: In the training video Geoff mentions several times about attaching images to

Re: [LegacyUG] Geo Location Question

Well said Ruth . . . . Bob Ruth Nerud wrote: If you think Legacy is so full of glitzy bells and whistles and very little substance, why do you use it? People who do nothing but complain about what isn't, should be grateful for what is Ruth A. (Sconza Testa) Nerud [EMAIL PROTECTED]

Re: [LegacyUG] Geo Location Question

It already does include Germany. Just checked mine and it lists cities in Germany staring with "Aabauershaft" and ending with the city "Zyfflich". Bob Michele Lewis wrote: Are there plans to expand the Geo Location to include other countries? I could really use it for Germany :) michele

Re: [LegacyUG] Help Please

No problem here . . . . Just tried searching Ancestry.com - Legacy transmitted the search query, Ancestry performed the search, and I got the resulting "hits" displayed in my browser just fine. No need for an update to version 6 to fix this. Bob TH wrote: Evert, Is it wrong to assume tha

Re: [LegacyUG] Bug on Ages Report Option?

Susan, Just checked - I'm seeing the same behavior. Looks like a minor bug . . . . Bob Susan Daily wrote: I played with Ctrl-A again, and this time was curious what a report would look like. So I clicked on the bottom left "Print Report", then clicked on Preview. I then unchecked both RIN

Re: [LegacyUG] Boot up Error '380'

Jim, Go here to find the solution to your problem . . . http://www.legacyfamilytree.com/helpError380.asp Bob Jim Smith wrote: Greetings: I just this minute received an "Update" notification form Legacy as I was booting up my 6.0. The update downloaded and then when I went to open my Legacy

Re: [LegacyUG] About quarter dates....

YOU subscribed to the group. Read the instructions on how to unsubscribe at the bottom of EVERY message. QUIT SENDING THE SAME EMAIL TO THE GROUP. GLENN BLUEMEL wrote: Quit sending Legacy E-Mail - Original Message - *From:* Min Chambers *To:* L

Re: [LegacyUG] Line on Individual report

message, please include all previous correspondence. Thanks. Bob Janice wrote: Just ran the Individual Report for both my mother and father (both have cause of death indicated in the medical notes). Both reports look fine - no bisecting line after the cause of death. I know this doesn't

Re: [LegacyUG] Line on Individual report

tion/...heading. Nick --- Bob Janice <[EMAIL PROTECTED]> wrote: Just ran the Individual Report for both my mother and father (both have cause of death indicated in the medical notes). Both reports look fine - no bisecting line after the cause of death. I know this doesn't help

Re: [LegacyUG] Line on Individual report

Just ran the Individual Report for both my mother and father (both have cause of death indicated in the medical notes). Both reports look fine - no bisecting line after the cause of death. I know this doesn't help you but I figure the more information the better . . . . Bob Nicholas Cirill

Re: [LegacyUG] compressing the location database

Andre, Go to Options -> Customize -> Other . . . Look to the lower left and click "Geo Location Database Maintenance". Click "Compress". Bob Andre Switala wrote: After importing the location databases in legacy I did not compress the database right away (since I had to shut down my compute

Re: [LegacyUG] updates

Russ, The password is for the "FREE" version of Legacy. There is no problem having it made public. Bob R G Strong Genealogy wrote: That question should have been directed at support and the answer should not have been given here Russ - Original Message ----- From: &

Re: [LegacyUG] updates

Bill, Try "family" . . . . Bob Bill Brinegar wrote: I have been trying to update my version of legachfamilytree, but it ask for a password. I bought a new computer and somehow have lost the password when I transferred the files. Can you Help? Thanks, Bill Brinegar [EMAIL PROTECTED] <

Re: [LegacyUG] Picture Center Updates to Individual Records

Art, The OpenOffice Suite comes with the program "Base". Base can open and manipulate Access data files. Bob Art Sedddon wrote: *Cathy, * *in your answer to Gary you mention opening the database in Access.* *Do you, or anyone, know of a open source equivelent to Access similar to OpenOff

Re: [LegacyUG] One tested method of organizing files ...a bit more still

Gary, Not sure what you mean when you say ". . . the Legacy feature that automatically assigns the next sequential FileID can not be used when prefacing the FileID with a letter." I routinely use "FID" as my FileID format (i.e. FID0001, FID0254, etc.). When assigning a new FileID to a s

Re: [LegacyUG] List of Cemeteries

Gene, I think what Ron meant was are they stored in the Master Location list, in the Event Address list, etc. Without knowing _where_ you have stored the cemetery names it is extremely difficult, if not impossible, to answer your question. Bob [EMAIL PROTECTED] wrote: They are stored as

Re: [LegacyUG] Help please with IGI search

Bill, Check your firewall settings. The Legacy update is considered a new file by the firewall program. It needs to be told to allow the "new" Legacy to connect to the internet. Bob [EMAIL PROTECTED] wrote: Hi Everyone, I have been searching the IGI from Legacy until to day when I do

Re: [LegacyUG] CDs and Gedcoms and Passage Express

Tracey, Passage Express cannot open GEDcom files natively - it needs GENViewer. Go to the "Options" menu in Passage Express and then click on "File Readers". You should see GENViewer Lite listed as the reader for GEDcom files. If not simply click the Add button, navigate to where it is on

Re: [LegacyUG] Suggest a New Feature

John, Unless I'm mistaken and you are talking about something else, there already is an "Add" button on the right hand side when viewing the Master Location List. Bob [EMAIL PROTECTED] wrote: Could I add the suggestion of the option of being able to add Locations to the location list. Joh

Re: [LegacyUG] Book-Descendant report problem with creating PDF or RTF format

Beth, After choosing "PDF" or "RTF" as your output option and clicking the "Create" button, did you give the file a name?? If you didn't then the printer icon in Legacy just keeps "spinning its wheels' and no report is ever produced. Sounds simplistic but I (and others) have gotten caught i

Re: [LegacyUG] Location names

Leo - If you go to the Master Location List, highlight one of the locations, and click "Edit" you will get a window that not only allows you to edit the name of the location, but also contains a "Notes" window for that location where you can input any type of alternate information about that lo

Re: [LegacyUG] Standard Usage?

Nick, You could always use an event called "Social Security Number" and mark it as private. That's what I do. Bob Nicholas Cirillo wrote: Kathy, That's an excellent idea. It will take some legwork and I fear missing something, particually a SS number but will try it. Nick --- Kathy Shiell

Re: [LegacyUG] User Manual

Marie, I agree wholeheartedly! While the on-line help is extremely good, having the manual open in front of you and being able quickly browse through the chapters is very convenient. I also do the same thing as you - read through the manual while waiting for an appointment or any other "slo

Re: [LegacyUG] Map My Family Tree - how do I recover my registration key?

Is it just me or has this thread gone to nowhere and back?? Dora Smith wrote: Actually, it's puzzling that we would be discussing Map My Family Tree - and this is what confused me. Rootsmagic (Not Millenia, which is who I thought developed it) came out with a better program called Family Atl

Re: [LegacyUG] Map My Family Tree - how do I recover my registration key?

Progeny Software - like I did and, I am sure, other people did. Just because Millennia sells the product does NOT mean that they are the only source for the product. Dora Smith wrote: Why would I be asking on this list if I didn't purchase my software from Millenia? Who

Re: [LegacyUG] organizing notebooks

Janis, I put all my documents in the acid-free mylar sleeves you mentioned. I have a Dymo LetraTag QX50 label maker that I use to make two labels for each item. The first label is the MRIN number for the particular individual that the document refers to, the second label is the FID number t

Re: [LegacyUG] FONT SIZES IN NOTES

- that should make the notes readable again. Hope this helps . . . Bob Wayne Morgan wrote: Hi Bob: I am not sure what you mean. My notes are shrunken and remain that way, when you re-open the notes or not. Wayne On 12/7/06, *Bob Janice* <[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED

Re: [LegacyUG] FONT SIZES IN NOTES

Hi Wayne, This has been noticed before although I'm not sure what the current status of the fix is. It is certainly occurring in the latest build released 12/6. It shouldn't be too much of a problem because when re-opening the notes window the font displays in the correct size. It makes en

Re: [LegacyUG] General Location Research

Dora, What is the "tag system of data entry"??? and what does "You have to remember that with Legacy you don't use the search feature to search . . . " mean??I find both statements confusing!! I'm not aware of using tags for data entry and what exactly do you use the "Search" feature in

Re: [LegacyUG] New TreeDraw V3?

Jeff, You could export a GEDCOM from Legacy and then import that file into GenBox. I have both programs and use that method with great success to create charts in GenBox. Bob malkajef wrote: Thank you. But I believe that Genbox is more than a charting program - or am I wrong? From my re

Re: [LegacyUG] Transcribing software

Mary, Try this link http://home.wanadoo.nl/jgboerema/en/Freeware.htm Bob Mary Young wrote: Hi, Dee Thanks, but that wasn't it. The reference was for a little program which split into two screens, one for the image and the other for typing in the transcript. Easier than loading an image viewe

Re: [LegacyUG] IE7

TomM -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bob Janice Sent: Tuesday, November 07, 2006 6:24 AM To: LegacyUserGroup@legacyfamilytree.com Subject: [LegacyUG] IE7 Now that the initial release of IE7 has been finalized and people have begun using it,

[LegacyUG] IE7

Now that the initial release of IE7 has been finalized and people have begun using it, I was wondering if there are any issues that we, as users of Legacy, need to be aware of? I know that Legacy uses the IE engine when displaying the "Legacy Home" tab and wanted to make sure that there were n

Re: [LegacyUG] Legacy Spyware

Dale, I have run SpyBot Search & Destroy, AdAware, SpywareBlaster, Spy Sweeper, SUPERAntiSpyware, Windows Defender, and a-Squared Free on my system (yeah I know I'm paranoid!). All of the above have run with Legacy fully installed and operational. I have _never_ had any of the above spyware

Re: [LegacyUG] Passage Express

: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bob Janice Sent: Sunday, October 01, 2006 2:32 PM To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] Passage Express Hi Ken, I purchased the paid deluxe version several months ago (before the free version came out as part of

Re: [LegacyUG] Passage Express

Hi Ken, I purchased the paid deluxe version several months ago (before the free version came out as part of the latest Legacy update) and have been extremely satisfied with it. I made several CD's with family history information (including photos, PDF documents, sound files, sideshows, and w

Re: [LegacyUG] Ancestor and Descendant Interest

Stephen, Look just to the left of the "Private" and "Birthday Reminder" checkboxes. You should see two "drop-down" lists labeled "Anc" and "Des" - this is what you are looking for. Bob [EMAIL PROTECTED] wrote: From the Help File for Information Screen: "Ancestor and Descendant Interes

Re: [LegacyUG] Web page creation errors

Byron, I know this doesn't help you much, but I just checked my Legacy database with "Family Group Sheets" web pages, and they were created without any errors. This would, at least, eliminate the possibility of a "bug" in the program. I did a quick search with Google for error codes 3201 and

Re: [LegacyUG] Passage Express & Legacy website creation tools

Hi Tracy, I have the "Deluxe" version of Passage Express and have been able to incorporate the web pages created by Legacy into it with no problems. The only change I had to make from my "normal" procedure was to tell Legacy not to put any pictures into a different directory than the HTML pa

Re: [LegacyUG] Morris Town, NJ, USA

Nina, There are two entries in the GEO database: 1. Morristown, Middlesex, New Jersey, USA 2. Morristown, Morris, New Jersey, USA There are _no_ entries for "Morris Town" at all in New Jersey. Hope this helps. Bob SKL 1750 wrote: Hi everyone, I am looking for the full Legacy location for

Re: [LegacyUG] Bug in new version of Legacy?

No problem here - using the latest version of Legacy also. All information is displayed as it should be. Bob Kevin McMillan wrote: I downloaded and installed on my laptop the latest version (*6.0.0.108 )* using the Update function under Legacy News. Now when I click on a

Re: [LegacyUG] List Messages Problems

who knows . . . . . Thanks for your idea, Bob Frank Sievers wrote: Bob Janice wrote: I too am having problems receiving messages from the list. The last message I received was 6/29/2006 - since then nothing. I have unsubscribed and re-subscribed twice to no avail. I didn't even get the "auto

[LegacyUG] List Messages Problems

I too am having problems receiving messages from the list. The last message I received was 6/29/2006 - since then nothing. I have unsubscribed and re-subscribed twice to no avail. I didn't even get the "automatic" email message welcoming me to the group. I have checked the SPAM folder on my

Re: [LegacyUG] Upgrading

Bill, Start Legacy; click the "Legacy Home" tab just below the menu bar; on the right side of the screen see the box labeled "Updates"; click the update link. Your update should be downloaded and then installed automatically if you are connected to the Internet. Bob Bill Daniels wrote: M

Re: [LegacyUG] individual event screen

Arnold, Very well put. I too would like to have the *option* of sorting by date. With the large number of users of Legacy, the developers will never be able to please everyone - however by making most of the customizations of the program *optional* they can satisfy the needs of the majority

Re: [LegacyUG] printing forms

Nancy, You may need to go to "Page Setup" in the Forms Center Window and change the margins and/or select the proper page size that you are printing. I just tried the 1920 Census form and it printed in it's entirety using 0.3 inch margins all around. Bob Nancy Bender wrote: I located the