Brian
I believe the problem here is the non use of the mapped drive designation as
opposed to the UNC designation. As you state UNC will cause legacy problems. I
originally tested using both methods into a NAS and the OP quoted path and it
worked fine using the mapped network path only.
For in
I would suggest a space is ascii code 32 which is 20 in hex. A letter A is
ascii code 65 (41). That is what is stored by windows. Note they are both the
same length.
The confusion appears to originate as when putting a space in a command line it
has to be entered as " " (ie 3 characters). It is
I would add not a legacy programmer just a good old visual basic programmer.
Adrian
Sent from my android device.
-Original Message-
From: Adrian Purkiss
To: legacyusergroup@LegacyUsers.com
Cc: remotes...@wavp.co.uk
Sent: Sat, 08 Aug 2015 3:17 PM
Subject: RE: [LegacyUG] Tag Numbers not
: Adrian Purkiss [mailto:a...@wavp.co.uk]
Sent: 08 August 2015 14:19
To: legacyusergroup@LegacyUsers.com
Cc: remotes...@wavp.co.uk
Subject: RE: [LegacyUG] Tag Numbers not shown on Opening Family Page
With version 209 the tags work and display as expected at least here. With
tagging options checked
With version 209 the tags work and display as expected at least here. With
tagging options checked tags show in family view.
Your installation may be corrupted.
Adrian
Sent from my android device.
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived message
This question keeps being asked, answered and then asked again after a few
weeks. The question is never clear and originally appeared to refer to the
product generations not Legacy. Very strange.
Sent from my android device.
-Original Message-
From: Jenny M Benson
To: legacyusergroup@
Runs for cover!
Sent from my android device.
-Original Message-
From: "Brian L. Lightfoot"
To: legacyusergroup@LegacyUsers.com
Sent: Fri, 31 Jul 2015 3:45 PM
Subject: RE: [LegacyUG] HisHer confusion
"Females are always on the right and Males are always on the left."
Let me see if I g
Do you have all service packs for Windows 98 installed. I believe there were 3.
This is stated as a requirement for Legacy 8. It might well be the SP's have an
upgrade to installation procedures.
Adrian
Sent from my android device.
Legacy User Group guidelines:
http://www.LegacyFamilyTree
Has it been put through the request functionality process to Legacy?
Regards
Adrian
Sent from my android device.
-Original Message-
From: "Brian L. Lightfoot"
To: legacyusergroup@LegacyUsers.com
Sent: Tue, 21 Jul 2015 6:08 PM
Subject: RE: [LegacyUG] Include information on generated Web
I have had a look into the database structure, I was an ms access database
support person for 15 years, and there appears no difference as to how dates
for user defined events and built in events are stored. I cannot examine the
process which takes the data and uses it though as that is part of
Just a thought, as I haven't tried it, try "" in the what to look for field
rather than leave it blank.
Adrian
Sent from my android device.
-Original Message-
From: "Brian L. Lightfoot"
To: legacyusergroup@LegacyUsers.com
Sent: Sun, 19 Jul 2015 9:28 PM
Subject: [LegacyUG] Search Funct
Adrian
Sent from my android device.
-Original Message-
From: Adrian Purkiss
To: legacyusergroup@LegacyUsers.com
Cc: remotes...@wavp.co.uk
Sent: Sat, 18 Jul 2015 4:03 AM
Subject: re: [LegacyUG] Potential Problem with dates
Jim
Sorry not intending to bash you personally rather support in
with dates
Adrian,
You forgot to bash me for my 2nd suggestion!
Jim
Legacy Family Tree
Technical Support
Original Message
> From: "Adrian Purkiss"
> Sent: Friday, July 17, 2015 1:30 PM
> To: legacyusergroup@LegacyUsers.com
> Subject: re: [LegacyUG] P
Technical Support
Original Message
> From: "Adrian Purkiss"
> Sent: Friday, July 17, 2015 1:30 PM
> To: legacyusergroup@LegacyUsers.com
> Subject: re: [LegacyUG] Potential Problem with dates
>
> Jim
>
> I'm sorry but that seems the ans
Jim
I'm sorry but that seems the answer given to all problems even when the user
has stated he had tried that and it does not fix the problem as Ron has said.
Adrian
Sent from my android device.
-Original Message-
From: Jim Terry/Support
To: legacyusergroup@LegacyUsers.com
Sent: Fri
Normally, not enough space for the compressed zip file in the location you are
trying to store it to.
Regards
Adrian
Sent from my android device.
-Original Message-
From: Donna Newell
To: legacyusergroup@LegacyUsers.com
Sent: Wed, 08 Jul 2015 4:05 PM
Subject: [LegacyUG] Error 507
Cou
ssage-
From: dgadam...@gmail.com
To: legacyusergroup@LegacyUsers.com
Cc: "remotes...@wavp.co.uk"
Sent: Fri, 03 Jul 2015 4:23 AM
Subject: Re: [LegacyUG] Censusfinder
Censusfinder is setting off my virus protection. Is anyone else seeing this?
Dean Adams
From: Adrian Purkiss
Sent: Th
The URL works for me.
Adrian
Sent from my android device.
-Original Message-
From: Gene Wheeler
To: legacyusergroup@LegacyUsers.com
Sent: Fri, 03 Jul 2015 1:12 AM
Subject: Re: [LegacyUG] Censusfinder
This is what I get when using the link there:
415. That’s an error.
The requested UR
From: Adrian Purkiss
To: legacyusergroup@LegacyUsers.com
Cc: remotes...@wavp.co.uk
Sent: Sat, 27 Jun 2015 7:06 PM
Subject: re: [LegacyUG] Lockup, wrong record displayed and Error 381 (Strange
behavour)
I can now reproduce the error to order although not the lockup or 381 error.
But wrong record
happens.
Adrian
Sent from my android device.
-Original Message-
From: Adrian Purkiss
To: legacyusergroup@LegacyUsers.com
Cc: remotes...@wavp.co.uk
Sent: Sat, 27 Jun 2015 11:55 AM
Subject: re: [LegacyUG] Lockup, wrong record displayed and Error 381 (Strange
behavour)
After a period of
system and mice are different on the 2 machines.
See if I can get anywhere.
Adrian
Sent from my android device.
-Original Message-
From: Adrian Purkiss
To: legacyusergroup@LegacyUsers.com
Cc: remotes...@wavp.co.uk
Sent: Sat, 27 Jun 2015 2:36 AM
Subject: re: [LegacyUG] Lockup, wrong record
f you want to keep them, please see
http://support.legacyfamilytree.com/article/AA-00983 for the steps to back
them up. (Be aware that sometimes it's the customized settings that are the
cause of a problem and restoring the settings may bring the problem back.)
Jim
Technical Support
Legacy Family Tree
---- Orig
egacy 8" at
http://support.legacyfamilytree.com/article/AA-00374.
Jim
Technical SUpport
Legacy Family Tree
Original Message
> From: "Adrian Purkiss"
> Sent: Friday, June 26, 2015 3:24 PM
> To: legacyusergroup@LegacyUsers.com
> Subject: [LegacyUG] Lo
All
I am not experiencing too many of the above problems but they do all occur. All
my problems follow use of the back button on the quick access toolbar. I do not
believe it happens if back button is used on the main toolbar but that may be
just lucky.
Reason for writing is to ascertain if an
Mine does 6 too but only 2 files can be opened. Version 8.0.0.501. Depends on
the size of the screen whether its usable or not.
Adrian
Sent from my android device.
-Original Message-
From: Sherry/Support
To: legacyusergroup@LegacyUsers.com
Sent: Fri, 26 Jun 2015 10:21 PM
Subject: Re: [
26 June 2015 at 19:40, Adrian Purkiss wrote:
> I am rather confused how you get the \NASS(Z) in your path then, you
> should get Z:. Legacy should be treating it as a virtual local drive. When
> you manually link and get the Microsoft search box are you selecting file
> by “my compu
27;t find - now we are down to 18-
which are probably in the same situation as a folder within a folder within ad
infinitum!! I haven't had the courage to search for the last 18 yet!
Thanks for your input,
Marion
On 26 June 2015 at 18:28, Adrian Purkiss wrote:
If you used the mapped
If you used the mapped network drive in "my computer" to connect as opposed to
using the NAS in "networks" the problem will go away. It appears Legacy cannot
handle network designations whereas it is perfectly happy to use drive letters.
Let windows do the translation internally. This is what is
Surely, if the NAS drive were mapped to a PC drive as previously discussed it
should be (and I’m assuming the NAS drive is configured as drive z)
Z:\Family Tree AW\The Lloyds/Percy Mott\Percy Thurger Leonard Mott\Percy
Mott\Service Record\filename.jpg
I am confused by \\NASXXX\(Z) and
Sherry
I think you missed the note where it was confirmed the solution was length of
file name.
From: marion wimsett [mailto:2wi...@gmail.com]
Sent: 23 June 2015 14:30
Hence the discussion on field size
Adrian
From: Sherry/Support [mailto:she...@legacyfamilytree.com]
Sent: 24 June 2015
of FreeClips from M8 software. It captures
everything you copy. You have the choice of pasting with or without formatting
- and if you set it up with the txt button showing on clips and have set up txt
to do the cleanup you need - it's just a matter of where you click.
Cathy
Adrian Purkiss wrot
15 at 7:32 AM, Adrian Purkiss wrote:
Marion
Have had a look in the internal structure of the legacy (access based) database
structure using ms access and the allowed file lengths are as follows.
Path name maximum 255 characters
plus
File name another 255 characters
It should be flagged
?
What is the "default" font and type size when pasting from Notepad?
Thanks,
Barton
On Tue, Jun 23, 2015 at 02:06 AM, Adrian Purkiss wrote:
For info only. Memo fields are where ms access store legacy type note
fields. They have a very large capacity as opposed to normal fields
Marion
Have had a look in the internal structure of the legacy (access based) database
structure using ms access and the allowed file lengths are as follows.
Path name maximum 255 characters
plus
File name another 255 characters
It should be flagged up to support that Legacy gives the m
For info only. Memo fields are where ms access store legacy type note fields.
They have a very large capacity as opposed to normal fields which are
restricted to a maximum of 256 characters. Memo fields can be set up as text
only or rtf (richvtext format) which means they would support all word
I am trying to tag blood relatives on certain key persons in my tree.
However, I can't find a way to do it. It either tags ancestors only (with or
without spouses and siblings depending on settings) and ignores cousins. Or
it includes all connected people even if they are blood relations or not.
Le
36 matches
Mail list logo
