Hi all,
I use Director 8 on a win2000 system and video's don't play in a movie...
On other systems with win98, it works fine...
any clue? I have mediaplayer 6.4.09.1109 on my system...
cheers,
Martijn
-
Pas de Deux
Van Mierisstraat 25
2526 NM Den Haag
tel 070 4450855
No offence meant... I just thought it was a humorous typo.
None was ever taken :)
[To remove yourself from this list, or to change to digest mode, go to
http://www.penworks.com/LUJ/lingo-l.cgi To post messages to the list,
email [EMAIL PROTECTED] (Problems, email [EMAIL PROTECTED])
Hi All,
I would like to know how to make the shape of the MIAW as you want, for
example, I want the Miaw look like an Earth, how can I do? I saw someone do
that before but I cannot figure it out, please help.
Thx all
_
Get your
you must use a 1 bit mask and the command
set the windowtype of window POPUP to member maskPopUp
-
Nicolas MAREY
ADELIS - Développeur Multimédia
-
- Original Message -
From: Eric Choy
You haven't mentioned what kind of videos you're playing. If it's avi, then
you'll need to install that specific codec on your system. Check the
properties of the video files in Media Player.
If you're using QT movies, you're going to have to install QuickTime on
your system.
Cordially,
Pranav
you have to create a 1 bit bitmap castmember with the shape you want to use,
then
window mywindow.mindowtype = member mymember
it works only by projector
roberto
-Messaggio originale-
Da: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]Per conto
di Eric Choy
Inviato: martedl 31 luglio 2001
I amworking with the PDF Xtra on a project that involves a little search engine for
the PDF files (ca 30). The search results are to be displayed in a small pop up window
(miaw) but:
after appearing briefly on top of my full screen main movie (the one that also
displays the PDF files) it
Oh, I use Avi's with Cinepac codec... I have this codec installed and
mediaplayer playes the files correctly on my win2000 system...
thanks cheers,
Martijn
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, July 31, 2001 2:36 AM
Subject: Re: lingo-lno
Try importing the AVI's as QT cast members. Although you'll need to install
QuickTime to make them run, you'll be sure that they'll work without any
anomalies.
Don't forget to ship the QT Asset Xtra's too.
Cordially,
Pranav Negandhi
New Media Applications.
Learnet India Limited, Mumbai.
Phone:
Hi list,
Does anybody know how to change the colour of the defult blue hyperlink? Any
help would be much appreciated.
thanks
Iain
[To remove yourself from this list, or to change to digest mode, go to
http://www.penworks.com/LUJ/lingo-l.cgi To post messages to the list,
email [EMAIL
Is there a way in dump the entire (or parts of) director file to one big
lingo script that could be editied, used to rebuild call the casts,
properties, etc?
This would be similar to Houdini being able to dump an entire .hip file
using opscript.
Take a look at the vList Xtra. There is some
Hi,
There's a article called Non-rectangular MIAWs on Director Online. I don't
have the URL but just do a search there.
Blessings, Darryl
Hi All,
I would like to know how to make the shape of the MIAW as you want, for
example, I want the Miaw look like an Earth, how can I do? I saw someone
Hi Iain,
You need to set the useHypertextStyles property of a text member to FALSE
which turns off the automatic formatting and cursor change. Then if you do
want another color and/or cursor change you need to set that for each
individual word/link.
Blessings Darryl
Hi list,
Does anybody
I already tried that, but it means I have to reprogram part of my project
(which worked fine on the win98 machine...)
Windows media player doesn't even recognize (unknown format) what codec is
used (for different video's with different codecs...)
what can I do? what am I missing...!?
Martijn
Hello List,
I'm trying to set mSetCriteria from a list named gGeokeyList from within a repeat
loop. An example of what the list might look like is [2, 5, 7]. I comment the line at
which I get an Index out of range error. Can anyone see what I'm doing incorrectly?
on mouseUp
closeTables
I thought you said that WM player correctly plays the files on Win2k also.
If you're getting the unknown format error for only a few files check
that they are indeed rendered with Cinepak and have not been corrupted
somehow.
Try using a different codec too. I've used Indeo 5.4 (I think that
At 9:19 -0400 2001_07_31, Gene Fritzinger wrote:
set gTable = new(Xtra V12table, mGetRef(gDB), regmast)
CheckV12Error()
repeat with var in gGeokeyList
x = gGeokeyList[var] --THIS IS WHERE I GET AN INDEX OUT OF RANGE ERROR
would that be: x = gTable[var]
Jakob
[To remove
repeat with var in gGeokeyList
Hi Gene,
I'm pretty new to Lingo but this the first time I've seen snip var in
list/snip syntax. I checked the Lingo dictionary under in and perhaps
thats the problem, we don't have this syntax in Lingo. It would also make
sense of the error.
You'd need to use
Hello all,
I have done a project,which is basically a browser
based multimedia presentation. It runs through the
Internet Explorer only.It has a lot of videos and VO.
Now the client wants autorun facility.If i give
autorun and if the end user machine has Netscape as
the default browser the
on 7/31/01 4:31 AM, nik crosina at [EMAIL PROTECTED] wrote:
Can this be changed, or over-ridden somehow? Does anyone have any experience
with that?
Many thanks,
Nik Crosina
According to the documentation from Integration, the PDF will ALWAYS be on
TOP of everything. You can't put
Here's my problem. I have about 20 separate movies. Each movie represents a
slide in a presentation.
Each slide has animation, interactivity and buttons to move to the previous
and next slides.
I want to store the order that the movies are played (ie: the order of the
slides in the presentation)
Thanx Irv,
This now works with only one small problem. When it loops from 2 to 4 and then 4 to 7,
it doesn't add a return in the field so the field displaying the results looks like
this:
SNIP from field member
New York Region
New England Region
Hi,
I want to keep the user busy while a shockwave movie is loading. I figured
I'll use the idleLoad while playing a small movie to check if the desired
members have arrived. When the cast members are loaded I will start the
main feature.
I haven't been able to figure out from the
I want to keep the user busy while a shockwave movie is loading. I
figured I'll use the idleLoad while playing a small movie to check
if the desired members have arrived. When the cast members are
loaded I will start the main feature.
I haven't been able to figure out from the documentation
You need to add a return character yourself. Change:
put mGetSelection(gTable, LITERAL, 1, mSelectCount(gTable), ,
, return, DESCRIPT) after field RegionSelectedGeographies
to:
put mGetSelection(gTable, LITERAL, 1, mSelectCount(gTable), ,
, return, DESCRIPT) RETURN after field
Hey just wanted to point out that on IE, there's no link to 'mile high
table of xtras' on the xtra page, although it shows on netscape and icab -
weird.
I'm curious to see if anyone's gotten the vlist to work with an image
rather than a db?
[To remove yourself from this list, or to change to
Hello all,
I have done a project,which is basically a browser
based multimedia presentation. It runs through the
Internet Explorer only.It has a lot of videos and VO.
Now the client wants autorun facility.If i give
autorun and if the end user machine has Netscape as
the default browser the
At 05:19 PM 7/30/01 -0400, you wrote:
I use FileXtra3 to export content. I don't the link off hand but it
shouldn't be too hard to find. Try http://www.behaviors.com.
Bill,
you use FileXtra3 to export graphics files from Director? am I missing
something here? it certainly does a lot of
Por favor ayudemen: deseo retirarme de la lista.
[EMAIL PROTECTED]
--- Robert Wingate [EMAIL PROTECTED]
escribió: WMP is just an application that uses the
DirectShow technology,
much like Tabuleiro's DirectMediaXtra
Thanks Mark for calling me on this one. I don't mean
to
Por favor ayudemen: deseo retirarme de la lista.
If you don't speak Spanish, he's asking to unsubscribe. Politely, at least.
Tab is aware now, if he wasn't before.
Cordially,
Kerry Thompson
[To remove yourself from this list, or to change to digest mode, go to
Hello list members,
I have been asked to put together a presentation that would involve two computers. So
for example, I would start the projector on both machines. (Controlling everything
from one machine though.) Based on what is clicked on it would update on the other
machine. Is this
I have a problem with a project and a number of its MIAWs. I have tried a
number of ways to close an MIAW
GLOBAL myMIAW
on mouseDown
tell the stage to forget myMIAW
end
on mouseDown
tell the stage to forget window myMIAW
end
---
You could do this with the multiuser xtra - there's a great example from
macromedia with one shockwave controlling webpages that the other
shockwaves see.
[To remove yourself from this list, or to change to digest mode, go to
http://www.penworks.com/LUJ/lingo-l.cgi To post messages to the
Thanks again Irv !
_ _ _ _ _ _ _
You need to add a return character yourself. Change:
put mGetSelection(gTable, LITERAL, 1, mSelectCount(gTable), ,
, return, DESCRIPT) after field RegionSelectedGeographies
to:
put mGetSelection(gTable, LITERAL, 1, mSelectCount(gTable), ,
,
John,
I have had the same problem recently, and after some digging into
macromedia's site, found that you cannot initiate a closing of a MIAW window
from itself. Apparently, after you call the handler from the MIAW window, it
expects a return value internally, and if the window does not exist
Var is going to be equal to the value of the integer in the list, not the
position, and when you use the brackets (I think) in accessing property
lists, it is looking for a positional value. So the first time thru the
repeat loop, it would work, because the var = 2 (which is a position in the
There was an extensive discussion of this subject around 3/23/2001. Search
the Lingo-L archives for the phrase closing miaw windows (in the subject
line). The archives are at http://www.mail-archive.com/lingo-l@penworks.com/
The essence of the issue is that the stage must close the MIAW, not
Hi,
I found a 'quick and nasty'solution for my problem:
i am putting the pop-up in front with every exit frame
event. this cvreates a bit of flicker but works more or less...
if anyone has a better idea, or exoperience, please let me
know!~!!!
thanks,
Nik
On Tue, 31 Jul 2001 09:38:03 -0500
Morgan is correct in saying that you do not close a MIAW directly. When
control to the originating script is passed, you will find that the MIAW
does not exist and the whole thing bombs out.
The only correct way to close a MIAW would be to set a global flag initially
set to false or some other
Howdy all!
I can't seem to get my brain in gear on this one, so I thought I might
enlist some help.
I have a list of game dates sorted by team. I need to access the dates
first by team (a pref given by the user and then by the next upcoming
game, figured by referencing the system date) My
Hi John
Don't have the MIAW close itself, rather have it tell the stage to set
either a global or in D8+ a timeout object that can do the close at some
short distance in the future. You need to finish the tell command in its
entirety including the call back by the stage to the MIAW as it passes
Hey just wanted to point out that on IE, there's no link to 'mile
high
table of xtras' on the xtra page, although it shows on
netscape and icab - weird.
Grimm dude...
dunno why you are having that problem. I probably go there 2-3x a day
have no problems in IE 5 on the PC.
Al Hospers
What's the new features with the 2.0 version? Is it compatible with
Acrobat 5 (1 doesn't seem to be)can we still use 1 with acrobat reader
4 on a cd?
[To remove yourself from this list, or to change to digest mode, go to
http://www.penworks.com/LUJ/lingo-l.cgi To post messages to
Correction then: a problem with IE on the MAC ;P
On Tue, 31 Jul 2001, Al Hospers wrote:
Grimm dude...
dunno why you are having that problem. I probably go there 2-3x a day
have no problems in IE 5 on the PC.
Al Hospers
Marketing Associate
UpdateStage
alhospersatupdatestagedotcom
I'm curious to see if anyone's gotten the vlist to work with an image
rather than a db?
What do you want to know exactly?
Daniel Devolder
Check my vList Xtra for saving Lingo lists with optional encryption
http://www.updatestage.com/xtras/vlist.html
[To remove yourself from this list, or to
Tony,
Actually, a more preferable way to approach this problem would be to use
a database like Valentina. Here, the teams and games could be stored in
separate tables (collections of data about separate things). Each row
in your team table would have information about one team, and each row
in
yes it's compatible
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, July 31, 2001 4:01 PM
Subject: lingo-l pdf xtra question...
What's the new features with the 2.0 version? Is it compatible with
Acrobat 5 (1 doesn't seem to be)can we still use
But is the older pdf xtra compatible with 5? Doesn't seem to be - at least
on mac; on windows you can have a workaround with includeing a 4.0 reader
on the cd.
On Mon, 30 Jul 2001, Dominic Villiard wrote:
yes it's compatible
[To remove yourself from this list, or to change to digest mode,
Hello All,
I need a kick start here...
I was looking for an easy solution for my cursor problem.
I have a director movie that contains a flash navigation bar.
What I am looking for is an easy solution to change the cursor into a
finger(anything!) when it is over the flash buttons. For some
James Newton has published a movie/behavior that allows this very easily.
http://perso.planetb.fr/newton/#text
Look for his Custom hyperlink style example movie.
[To remove yourself from this list, or to change to digest mode, go to
http://www.penworks.com/LUJ/lingo-l.cgi To post messages to
All you need is to make a stub projector
(documentation at macromedia.com)
Place all of your movies in the same folder
as your projector.
For the navigation between movies, one way is to
hard code the buttons in each movie to take you
to the previous or next movie.
A more elegant way would be
Sure, do this
property pFlash
on beginsprite me
pFlash=sprite(me.spritenum)
end beginsprite me
on enterframe me
if pFlash.mouseOverButton then
pFlash.cursor = 280
end if
end enterframe me
[To remove yourself from this list, or to change to digest
Hi, I'm wandering how do you create .dxr movies, do you need the full non
educational version of director?
Also is there some way to save text field data when jumping between movies,
I tried the updateMovieEnabled=TRUE but it won't work in Projector mode.
Thanks
Mark Jenkinson
Multimedia
53 matches
Mail list logo