Anyone using TSM for zOS?
I would like to know what the pros/cons/experiences are.
Reply privately if you wish.
Thank you, Bob Molerio
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email
On Fri, Jan 8, 2010 at 10:04 AM, bob molerio wrote:
> Anyone using TSM for zOS?
> I would like to know what the pros/cons/experiences are.
That's pretty open question. I guess the main pro and con of TSM for
z/OS is that it runs on z/OS...
What do you compare with? You could compare with TSM on
Sue,
For your first problem. Like the others already mentioned you can use the
dasd_configure command.
You can also add an "options dasd_mod dasd=" line to the
/etc/modprobe.conf.local with all the dasd devices you want to get online
after IPL. After that you run mkinitrd en zipl.
for example:
SLES also have the hz_timer file.
It is zero here as well, SLES10 SP2, z10.
and the HZ contains 100.
___
Tore Agblad
Volvo Information Technology
Infrastructure Mainframe Design & Development, Linux servers
Dept 4352 DA1S
SE-405 08, Gothenburg Sweden
T
On Fri, Jan 8, 2010 at 1:56 PM, Agblad Tore wrote:
> SLES also have the hz_timer file.
> It is zero here as well, SLES10 SP2, z10.
> and the HZ contains 100.
Correct. The "hz_timer" is to enable the "tick timer" - the "0"
setting is the right one, since that gets us the "tickless timer"
which av
Disclaimer. I do not use TSM on z/OS.
However, in most of the discussions with compatriots I have had, the
licensing cost for the z/OS version is a de-motivator and most have
licensed TSM for AIX or Linux, and only use a client on z/OS.
Subject: Using system z as a TSM server.
Anyone using TSM
Hi List,
When I try to bring up yast2 , I see a whole lot of errors streaming by and
eventually, the gui pops up. The last screen full looks like this:
** (y2controlcenter-gnome:7344): WARNING **: error accessing
/desktop/gnome/applications/y2cc-gnome/cc_actions_list [Failed to contact
config
On Fri, 8 Jan 2010 14:37:50 +0100
Rob van der Heij wrote:
> On Fri, Jan 8, 2010 at 1:56 PM, Agblad Tore wrote:
>
> > SLES also have the hz_timer file.
> > It is zero here as well, SLES10 SP2, z10.
> > and the HZ contains 100.
>
> Correct. The "hz_timer" is to enable the "tick timer" - the "0"
>
Hi Bernie,
how do you run it ? I start vncserver, connect there via vncviewer from my
desktop and run yast2 from xterm. I get no error at all.
Are you using full blown desktop ? I see some gnome in your output...
===
Marian Gasparovic
===
"The mere thought hadn't
Hi Marian,
On my desktop, I use Xming to start the Xserver.
On my guest, I export DISPLAY to my desktop.
I then issue "yast2"
-Original Message-
From: Linux on 390 Port [mailto:linux-...@vm.marist.edu] On Behalf Of Marian
Gasparovic
Sent: Friday, January 08, 2010 10:31 AM
To: LINUX-390@VM
Bernie,
I tried similar (ssh with X11 forwarding and xlivecd on my desktop to provide X
server), again, no problem. It must be something on your SLES11 side. What
software groups have you installed ? I unselected all three boxes under
Graphical Environment when I installed SLES11. I kept Base Sy
Hi all,
I am looking for gcc 4.2 onwards on sles9 x86_64. Can I get a prebuilt gcc
or do i have to build it myself? if building is the way to go, what should
be the configuration options?
I would like GCC to have 64 bit libs - having 32 bit libs is useful, but not
necessary.
Regards,
Raja
--
Marian,
Don't you need the X Window System group ?
Initially, I installed the 4 groups ( your 3 + the X Window group ) and I seem
to run into some sort of problem ( I don't remember what the errors were ) and
then I went on and installed the Gnome Desktop group and the Print Server group.
I will
Marian,
But your 3 groups do not provide nice/cute little icons when you go into yast2.
If I wanted icons, I think the X window group is needed.
I think the flexibility to use icons (yast2) or ncurses (yast) should be
available.
The information contained in this e-mail message is intended only
>>> On 1/8/2010 at 11:26 AM, rui wrote:
> Hi all,
>
> I am looking for gcc 4.2 onwards on sles9 x86_64. Can I get a prebuilt gcc
> or do i have to build it myself?
Someone, somewhere, may have built it, but finding it might be impossible.
> if building is the way to go, what should
> be the co
>>> On 1/8/2010 at 07:52 AM, Samir Reddahi wrote:
-snip-
> You can also add an "options dasd_mod dasd=" line to the
> /etc/modprobe.conf.local with all the dasd devices you want to get online
> after IPL. After that you run mkinitrd en zipl.
>
> for example:
> options dasd_mod dasd=200-202,203
Hi Mark,
Thanks for your reply. So you mean to say that i can get source rpm for
later SLES, say SLES 11 and then configure, make bootstrap it using the spec
file in the src rpm.
Also can two versions of gcc exist on one system, if yes then how do i setup
include, link and lib paths?
Regards,
R
>>> On 1/8/2010 at 12:00 PM, Bernie Wu wrote:
> Marian,
> But your 3 groups do not provide nice/cute little icons when you go into
> yast2. If I wanted icons, I think the X window group is needed.
> I think the flexibility to use icons (yast2) or ncurses (yast) should be
> available.
There ar
>>> On 1/8/2010 at 10:33 AM, Bernie Wu wrote:
> Hi Marian,
> On my desktop, I use Xming to start the Xserver.
> On my guest, I export DISPLAY to my desktop.
> I then issue "yast2"
If you use the X forwarding feature of your SSH client, and you have the
xorg-x11-xauth package installed on your L
Thanks Mark.
I do have xorg-x11-xauth installed and I do have x forwarding turned on in my
/etc/ssh/sshd_config.
So what do I have to do to bring up yast2 without exporting my display ?
TIA
Bernie
The information contained in this e-mail message is intended only for the
personal and confidentia
>>> On 1/8/2010 at 01:58 PM, Bernie Wu wrote:
> Thanks Mark.
> I do have xorg-x11-xauth installed and I do have x forwarding turned on in my
> /etc/ssh/sshd_config.
> So what do I have to do to bring up yast2 without exporting my display ?
Just make sure your SSH client has X forwarding turned
>>> On 1/8/2010 at 01:13 PM, rui wrote:
> Hi Mark,
>
> Thanks for your reply. So you mean to say that i can get source rpm for
> later SLES, say SLES 11 and then configure, make bootstrap it using the spec
> file in the src rpm.
Yes, but understand that with package name splits, different names
Thanks Mark. That's where I fell short.
> Just make sure your SSH client has X forwarding turned on.
I modified my PuTTY configuration, and now I don't have to export my display.
The information contained in this e-mail message is intended only for the
personal and confidential use of the recip
So when you set X forward in Putty (which sets your DISPLAY variable) instead
of setting DISPLAY yourself, you don't get those error messages ? No other
change ?
I use only X forwarding as I access SLES11 behind firewall, so I cannot try the
manual setting (I always get cannot open display).
==
For Marcy, Marian and Samir, thank you all for the information. I've
tried both yast and the dasd_configure command and I'm very happy that I
can still choose to add new dasd manually with dasd_configure, makinitrd
& zipl, or automatically with yast. So far, I've found over the years,
that using y
>>> On 1/8/2010 at 04:41 PM, Sue Sivets wrote:
-snip-
> *suse11:~ #* yast2
> Xlib: extension "RANDR" missing on display "localhost:10.0".
> The program 'y2controlcenter-gnome' received an X Window System error.
> This probably reflects a bug in the program.
> The error was 'BadValue (integer par
26 matches
Mail list logo