Re: Modify ifcfg-encw0.0.nnnn at DR

Hello Frank, Did you also change the other required network parameters like GATEWAY, NETMASK, etc.? Coming back to your original question - you can stage a startup script (Eg: S01DR_script.sh so that it executes first at the boot) that a. would verify whether you are in a DR site or not? b. If

files not visible post mount

/redhat71files Please advise Regards, Kumar -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin

Re: Goldimage Redhat 7.1

populating transaction after 10 retries: failure: Packages/perl-HTTP-Tiny -0.033-3.el7.noarch.rpm from anaconda: [Errno 256] No more mirrors to try. Regards, Kumar On Fri, Dec 23, 2016 at 2:33 PM, Kumar <kumarsyste...@gmail.com> wrote: > Hi Mike and Berry, > > Thank you fo

Re: new subnet for cloned zlinux guest

Hi Mike and Fred, Thank you for the replies. I checked again with the Network folks and found that the Switch was not configured to make the subnet usable, they will do the changes next week and hopefully i will be able to use the IPs then. Regards, Kumar On Wed, Dec 28, 2016 at 8:56 PM, Mike

new subnet for cloned zlinux guest

but still we cannot SSH to it. Previously we just had to update the IP assigned and default gateway using the eth0 down and up commands we were able to ssh to it. Please advise Regards, Kumar -- For LINUX-390 subscribe / signoff

Re: Goldimage Redhat 7.1

pu-alloc: [0] 16 [0] 17 [0] 18 [0] 19 [0] 20 [m * * [7mlines 1-23 [m [K* Why does it show that /dev/root missing? I am unalble to ssh to it to complete the installation. Regards, Kumar On Fri, Dec 23, 2016 at 2:33 PM, Kumar <kumarsyste...@gmail.com> wr

Re: Goldimage Redhat 7.1

and when i came back and saw my session i see below screen dracut://# I will retry again today and see what happens. Regards, Kumar On Thu, Dec 22, 2016 at 8:05 PM, van Sleeuwen, Berry < berry.vansleeu...@atos.net> wrote: > Hi Kumar, > > The HCP232E error is an IPL error. What

Goldimage Redhat 7.1

RH7 PRMI (NOH' * *'PUNCH INITRD IMGI (NOH' * Please let me know if any assistance on this. Regards, Kumar

sles11 module-init-tools_fix_bnc480524

give the link where i can download the exact rpm to resolve this dependency. with Regards Pavan Kumar -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message

sles11 module-init-tools_fix_bnc480524

give the link where i can download the exact rpm to resolve this dependency. with Regards Pavan Kumar -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message

[PATCH 10/15] s390: remove use of asm/segment.h

Removed S390 architecture specific users of asm/segment.h and asm-s390/segment.h itself Signed-off-by: Kumar Gala [EMAIL PROTECTED] --- commit 6ee9ded730a875d63e42add1c3094eca7d5a6cdf tree 5d340a409fd593e5f5d7e71467a038fd90def51b parent 8f20e153d5d5c3efd95835e814fae7b3ccbfcd08 author Kumar K

Re: Java Profiler for 31-bit s/390 Linux?

Cyanea is coming up with a new version for zLinux - Cyanea/One is the product name. By the way, IBM has acquired this company 'Cyanea' one month back. Kohrs, Steven [EMAIL PROTECTED] Sent by: Linux on 390 Port [EMAIL PROTECTED] 09/23/04 12:37 AM Please respond to Linux on 390 Port

Re: Linux390 LPAR - CPU info

- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Taraka Srinivas Kumar Sent: Saturday, August 21, 2004 9:14 AM To: [EMAIL PROTECTED] Subject: Linux390 LPAR - CPU info Hello, We have SuSE 8.1 for zSeries 31 bit installed in an LPAR. Am trying to get the CPU speed information from

Re: Linux390 LPAR - CPU info

at the time the measurement that populates the value is run. On Tue, 2004-08-24 at 04:42, Taraka Srinivas Kumar wrote: Hi, Is there some reason what that number is important to you? I've been doing working with Linux/390 for 4 years now, and I've never much cared. Depending on what processor

Re: Linux390 LPAR - CPU info

a great deal of fuzz to those numbers, especially in an I/O intensive application. Taraka Srinivas Kumar taraka.srinivas@ To tcs.com [EMAIL PROTECTED] Sent by: Linux on cc 390 Port [EMAIL PROTECTED

Re: Linux390 LPAR - CPU info

Found one interesting number from DB2 on Linux on mainframe. The command db2 get dbm cfg is displaying some information about CPU speed. I don't know how valid it is. CPU speed (millisec/instruction) (CPUSPEED) = 1.133626e-06 If i try converting this value to MIPS, it's coming around 880

Re: Linux390 LPAR - CPU info

Thanks all for the information that has been provided. This value is not being used anywhere in my application to compute some other value. So, there is no real need out here. So, again, what are you trying to accomplish beyond printing a number in a space? - Nothing -:) And the complete

Linux390 LPAR - CPU info

Hello, We have SuSE 8.1 for zSeries 31 bit installed in an LPAR. Am trying to get the CPU speed information from Linux. I have verified /proc/cpuinfo file to get the CPU speed. But the format has been changed for Linux on zSeries as compared to Linux on Intel. Is there any way to get the CPU

Linux - How to delete junk files

Hello! We are having some junk files with improper attributes. I am not able to issue any kind of commands on these files, even after logging in with ROOT. linxz900:# ls -l total 8 drwxr-xr-x 2 root root 4096 Jul 24 11:13 . drwxr-xr-x 3 root root 4096 Jul 24 11:13 .. ?rwxr-Sr-x

Re: Linux - How to delete junk files

Systems Programmer - Specialist; Technical Services; BAX Global Inc. Irvine-California Tel: 714-442-7591 Fax: 714-442-2840 Taraka Srinivas Kumar [EMAIL PROTECTED] Sent by: Linux on 390 Port [EMAIL PROTECTED] 08/15/2004 12:12 AM Please respond to Linux on 390 Port To: [EMAIL PROTECTED

Re: Linux - How to delete junk files

- How to delete junk files On Aug 15, 2004, at 6:00 AM, Taraka Srinivas Kumar wrote: Yeah. I didn't try fsck. But the problem got solved. I have used CDL option while running DASDFMT which is not suitable for some of these websphere files. Please give more detail on this. I always

GLIBC problem : Newbie

Hi all, Am trying to install DB2 client on Linux390 which is 32 bit SLES 8.0 and has GLIBC 2.2. But stuck up with the following error : /lib/libc.so.6: version `GLIBC_2.3' not found (required by /usr/lib/libstdc++-libc6.2-2.so.3) I think it is a very common error. But am not able to gather any

Re: GLIBC problem : Newbie

Hi, Yes. I am doing the installation using installer script. I have tried to install compat package long time back, but it gave me GLIBC_2.3 required problem. Fact is that i didn't uninstall/delete these libraries at that time. So this particular compat package is in dependency inconsistency

SuSE linux 64 bit installation problem - revisited

Hi all, Greetings. I have posted this problem one month back and posting the same again. I am installing 64 bit linux SuSE 8.0 in LPAR mode on zSeries. Completed all the Yast partitioning and package selection. Even installation using Yast went thru fine without any problems. When i IPL the

SuSE linux installation on zSeries - Yast terminates with signal 15

Hi all, Greetings. We are installing SuSE linux enterprise server 8.0 for zSeries on a z900 box in LPAR mode. Everything is fine till we started using Yast to partition and install the default packages. Yast started reading from the CD1 directory ( FTP mode), 36% completed...suddenly yast

Linux cloning - first time

Greetings, We have SuSE linux on an LPAR at our installation. I want to bring up another Linux LPAR. Thought the best way would be to clone the existing linux. Is it OK, if i 1.copy the existing volume(s) contents into a new set of volumes 2.Mount these new volumes and change fdasd, zipl.conf,

Re: MVS NFS question

Have you specified correct authentication options in the exportfs file on MVS ? Are the UID/GID on both systems matching ? Regards, Srinivas. Mike Caughran [EMAIL PROTECTED] Sent by: Linux on 390 Port [EMAIL PROTECTED] 06/03/04 04:21 AM Please respond to Linux on 390 Port [EMAIL

Re: Linux 390 tape drive

. with kind regards Carsten Otte -- I saw screens of green, red messages too, then came blue, shubidu And i think to myself, what a wonderful world Taraka Srinivas Kumar [EMAIL PROTECTED] Sent by: Linux on 390 Port [EMAIL PROTECTED] 01/06/2004 04:49 PM Please respond to Linux on 390 Port

Linux 390 tape drive

Hi people, I was trying to dump some data into a 3490 tape. I have issued the following commands. 1. modprobe tape390 2.lsmod Module Size Used byTainted: P st 28136 0 (autoclean) (unused) scsi_mod 89356 1

VPN client setup

Hi Guys, Is there any good documentation available on setting up VPN client ? Is it anyway different from that on i386 linux ? Regards. DISCLAIMER: The information contained in this message is intended only and solely for the addressed individual or entity indicated in this message and for

Websphere on Linux

Hi Guys, Are there any advantages/positive factors of putting Websphere on Linux for zSeries instead of z/OS ? All inputs are welcome. Regards, Srinivas.DISCLAIMER: The information contained in this message is intended only and solely for the addressed individual or entity indicated in this

Re: Websphere on Linux

PROTECTED] cc Subject Re: Websphere on Linux It depends now on the size of the machine and whether zAAPs would be financially justifiable. There is no simple answer. - Original Message - From: Taraka Srinivas Kumar [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, May 14

Re: Websphere on Linux

Can somebody theow some light on this zAAP processor ? Franz Josef Pohlen [EMAIL PROTECTED] Sent by: Linux on 390 Port [EMAIL PROTECTED] 05/14/04 07:37 PM Please respond to Linux on 390 Port [EMAIL PROTECTED] To [EMAIL PROTECTED] cc Subject Re: Websphere on Linux Hi,

Re: Websphere on Linux

Can i call this zAPP processor as a java coprocessor ? Davis, Larry [EMAIL PROTECTED] Sent by: Linux on 390 Port [EMAIL PROTECTED] 05/14/04 08:05 PM Please respond to Linux on 390 Port [EMAIL PROTECTED] To [EMAIL PROTECTED] cc Subject Re: Websphere on Linux Think of a

Re: Central processor is looping when 64 bit linux is IPLed

Hi Jim/Mark, I have tried the same after chrooting into /mnt/newroot. Also issued mkinitrd,zipl. Re-IPled using 1b26, again the same cpu looping problem re-appears. How to check if the kernel on the disk is 64 bit or not ?? Below is the procedure i have followed : inst-sys:~ # insmod dasd_mod

Re: Central processor is looping when 64 bit linux is IPLed

Port [mailto:[EMAIL PROTECTED] On Behalf Of Taraka Srinivas Kumar Sent: Saturday, May 01, 2004 7:53 AM To: [EMAIL PROTECTED] Subject: Fw: Central processor is looping when 64 bit linux is IPLed Guys, Resending the same query again. I am installing 64 bit linux SuSE 8.0 in LPAR mode on zSeries

Fw: Central processor is looping when 64 bit linux is IPLed

Guys, Resending the same query again. I am installing 64 bit linux SuSE 8.0 in LPAR mode on zSeries. Completed all the Yast partitioning and package selection. Even installation using Yast went thru fine without any problems. When i IPL the Linux LPAR with the root dasd address, it throws the

Re: New to Linux: where is located YaST on an installation system

Hi Janek, Check this link. http://portal.suse.com/sdb/en/2003/05/jreuter_sles8_yast_missing.html Regards, Srinivas. Janek Jakubek [EMAIL PROTECTED] Sent by: Linux on 390 Port [EMAIL PROTECTED] 04/30/04 01:55 AM Please respond to Linux on 390 Port [EMAIL PROTECTED] To [EMAIL

Central processor is looping when 64 bit linux is IPLed

Hi all, I am installing 64 bit linux SuSE 8.0 in LPAR mode on zSeries. Completed all the Yast partitioning and package selection. Even installation using Yast went thru fine without any problems. When i IPL the Linux LPAR with the root dasd address, it throws the following hardware error

Re: New to Linux: where is located YaST on an installation system

Hi, I faced this problem just 1 week back. The problem here is that Yast modules are not getting loaded into the main memory. What is the mode of installation that you are selecting here ? Is it FTP or NSF or any other thing ? Here SuSE 8.0 loads the Yast modules only after validating the

Linux for zSeries 31 bit/ 64 bit

Hi, Am new to the group. Hope to have some good discussions. We are using 64 bit SuSE Linux for zSeries. Is it possible to run 64-bit linux developed applications on a 31-bit Linux for zSeries ? Do we need to make sure that the correct libraries are used in the 64-bit Linux environment while

Re: CTG...

] Subject: Re: CTG... Vinod, What is CTG? I've not heard of it before. Mark Post -Original Message- From: Ramalingam, Vinod Kumar (Cognizant) [mailto:[EMAIL PROTECTED]] Sent: Saturday, February 09, 2002 12:07 AM To: [EMAIL PROTECTED] Subject: CTG... Does anybody have CTG 3.1 for Linux/390

Network Driver..

Hi.. We have the Multiprise 3000-H30 machine running Suse Linux. I upgraded the kernel version to 2.4.7. When I install the lcs driver for ethernet support, it throws an error saying invalid parameters.. I gave the command insmod lcs noauto=1 devno_portno_pairs=0x0e20,1 from

Re: Oracle Installation Problem

Hi.. Thanks.. Now, I can't find the download for gcc-2.95.3.tar.gz anywhere. Could you help pls.? Vinod. -Original Message- From: Alex Bykov [SMTP:[EMAIL PROTECTED]] Sent: Thursday, December 27, 2001 6:50 PM To: [EMAIL PROTECTED] Subject: Re: Oracle Installation Problem

Oracle Installation Problem

Hi.. When I try to re-link the Oracle binaries, Iam getting the following error: /oracle/ora901/rdbms/lib/opimai.o: file not recognized: File format not recognized collect2: ld returned 1 exit status make: *** [/oracle/ora901/rdbms/lib/oracle] Error 1 Iam having Suse

Re: Moving Linux DASD

Hi Davis.. For devices other than the root device, You can edit the parmfile and re-run the silo command. You can't do this for root device as the device that you are adding is not bootable. Vinod. -Original Message- From: Davis, Andrew Phillip (SWD) [SMTP:[EMAIL PROTECTED]]