At 01:54 AM 12/31/1999 +0100, Luca Berra wrote:
> >
> > You need to patch the kernel for the 0.9x raidtools. I believe Mandrake's
> > kernels are still at 0.4x and lower for kernel support, with 0.9x
> raidtools
> > included (why they don't pre-patch the kernel source to support the
> > raidtool
On Thu, Dec 30, 1999 at 02:40:42PM -0500, Lars Kellogg-Stedman wrote:
> My life has now been further complicated by the fact that I'm running
> devfs, which makes extensive changes to drivers/block/md.c. The new-style
> raid patches to md.c fail miserably.
it ain't difficult to fix, jus' boring
On Thu, Dec 30, 1999 at 01:46:13PM -0500, David Cooley wrote:
> At 12:07 PM 12/30/1999 -0500, you wrote:
> >I'm running Mandrake 6.1 with a couple of 9GB IBM U2 SCSI Drives off of
> >an Adaptec 7890 controller. I've been trying for a while now (a couple
> >of days) to get several of the partition
I tried out Mandrake 7.0 (oxygen) beta looks like they have a patched
kernel with 0.9x raidtools and a groovy gui for adding devices call diskdrake
took me 5 minutes to setup 3 18GB disks for linear..
Linux has come a long way indeed!
Stephen Waters wrote:
are you using 0.9x raid?
i am, and
I am seing the samproblems with lineaar mode and RedHat6.1/Mandrake 6.1
going to try Mandrake 7.0-beta
Wojciech Ku¶ wrote:
re-hi! (this is a small addition to my prev. mail)
I forgot... /etc/raidtab - isn't it useful to know? ;)
Here it goes:
raiddev /dev/md8
raid-level
are you using 0.9x raid?
i am, and my raidtab manpage says the value is in KB.
also, the HOWTO says it's in KB:
http://ostenfeld.dk/~jakob/Software-RAID.HOWTO/Software-RAID.HOWTO-4.html#ss4.8
-s
Andy Poling wrote:
>
> On Wed, 29 Dec 1999, [ISO-8859-2] Wojciech Ku¶ wrote:
> > raiddev /dev/md8
>
'ello again,
In a previous post I reported problems getting a previously working RAID
configuration to work after putting a new kernel in place.
It turns out that my problem was caused by the fact that (a) I hadn't
applied the RAID patches to my kernel because (b) I had no idea they had
alread
At 12:07 PM 12/30/1999 -0500, you wrote:
>I'm running Mandrake 6.1 with a couple of 9GB IBM U2 SCSI Drives off of
>an Adaptec 7890 controller. I've been trying for a while now (a couple
>of days) to get several of the partitions on the drives to be RAID-1 .
>However when I try and run mkraid I ge
I'm running Mandrake 6.1 with a couple of 9GB IBM U2 SCSI Drives off of
an Adaptec 7890 controller. I've been trying for a while now (a couple
of days) to get several of the partitions on the drives to be RAID-1 .
However when I try and run mkraid I get the following:
DESTRO
I recently started playing with software RAID on my 2.2.13 system. After
ditching a faulty scsi disk things were going swimmingly. However, in
between some kernel compiles, I've managed to break the software raid
system...
I'm running 2.2.13 with devfs (although the problem also manifests itsel
10 matches
Mail list logo