On Sat, 12 Jan 2002 11:33,Robert L. Hemus scribed:
> My local Windoze guru says you get a better copy from CDRW to hd? and
> back to CDRW. Correct or incorrect?
> Bob Hemus
Many say its more reliable, probably due to thats the way they have always
done things. However I do many DAO's without a
Previously, Robert L. Hemus chose to write:
> My local Windoze guru says you get a better copy from CDRW to hd? and
> back to CDRW. Correct or incorrect?
> Bob Hemus
For aduio CDs this is definately true. It's a least a good idea to rip them
to the hard drive first to test the read device's abi
On Jan 10 zohar was heard saying:
->Sir,
->I am rephrasing the thing.
->I have windows XP on one partition.
->I have Linux(SUSE 7.1, kernel 2.4) on another
->On windows partition there is a 16x CD-RW of Priya(a local company).
*** Zohar,
Check your mail, you'll find a little hint from me...
THANK YOU
For pointing out my mistake and suggestions.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On
Behalf Of Net Llama
Sent: Friday, January 11, 2002 11:22 PM
To: [EMAIL PROTECTED]
Subject: RE: StepXStep CD BURNERS-IDE
Your terminology is inaccurate. A CDR
On Sat, 12 Jan 2002 16:23:55 +1130
Mike Andrew <[EMAIL PROTECTED]> wrote:
> Just curious about the genuflection bit.
What are the consequences of not setting the genuflection bit?
(Something about the execution bit occurs to me)
(sorry, dumb joke, couldn't resist.)
--
Ken Moffat
[EMAIL PROTE
On Sat, 12 Jan 2002 13:03, Robert L. Hemus wrote:
> My local Windoze guru says you get a better copy from CDRW to hd? and
> back to CDRW. Correct or incorrect?
Windoze doesn't have a monopoly on this. That's a *general* observation. The
reason is because of the danger of buffer under-run to the
On Sat, 12 Jan 2002 09:49, Michael Scottaline wrote:
> Ahhh..., but we knew *his eminence* would set him straight now, didn't we,
> your lordship? ;o)
Just curious about the genuflection bit. Woudl that be with a patented Skippy
magic wand and will you go blind?
--
http://linux.nf -- [EMAIL P
On Fri, 11 Jan 2002 18:07:00 -0800 (PST), you wrote:
>--- "Robert L. Hemus" <[EMAIL PROTECTED]> wrote:
>> My local Windoze guru says you get a better copy from CDRW to hd? and
>> back to CDRW. Correct or incorrect?
>
>Perhaps with crappy windoze CD burning software, or if you have a burner
>with
--- "Robert L. Hemus" <[EMAIL PROTECTED]> wrote:
> My local Windoze guru says you get a better copy from CDRW to hd? and
> back to CDRW. Correct or incorrect?
Perhaps with crappy windoze CD burning software, or if you have a burner
with a very small buffer.
=
~~~
--- "Robert L. Hemus" <[EMAIL PROTECTED]> wrote:
> Net Llama wrote:
> > That's the wrong place. The correct place is /boot/grub/menu.lst
> > I'm not even sure why /root/boot/grub/menu.lst would exist.
> >
> > =
> >
> > Lonni J. Fri
Net Llama wrote:
> That's the wrong place. The correct place is /boot/grub/menu.lst
> I'm not even sure why /root/boot/grub/menu.lst would exist.
>
> =
>
> Lonni J. Friedman
Because I had to use the File Manager (S
My local Windoze guru says you get a better copy from CDRW to hd? and
back to CDRW. Correct or incorrect?
Bob Hemus
___
Linux-users mailing list
Archives, Digests, etc at http://linux.nf/mailman/listinfo/linux-users
On Sat, 12 Jan 2002 08:19,Michael Scottaline scribed:
> On Fri, 11 Jan 2002 17:07:19 -0500
>
> Kurt Wall <[EMAIL PROTECTED]> scribbled in frustration:
> > Scribbling feverishly on January 12, Keith Antoine managed to emit:
> > > Just to help with your English, in this list titles are not used
> >
On Fri, 11 Jan 2002 05:10, zohar wrote:
> I want this CDRW to work also with Linux as my ASUS CD-R is working. I
> was asking from where I will find the STEP x STEP tutorial for this.
CD BURNING ->IDE
--
http://linux.nf -- [EMAIL PROTECTED]
On Fri, 11 Jan 2002 17:07:19 -0500
Kurt Wall <[EMAIL PROTECTED]> scribbled in frustration:
> Scribbling feverishly on January 12, Keith Antoine managed to emit:
> >
> > Just to help with your English, in this list titles are not used
> > noramlly. Most here would be embarrased with the use of, S
Scribbling feverishly on January 12, Keith Antoine managed to emit:
>
> Just to help with your English, in this list titles are not used noramlly.
> Most here would be embarrased with the use of, Sir.
Yes Sir, Mr. Antoine, Sir.
[snippage]
K
--
There will be big changes for you but you will b
On Sat, 12 Jan 2002 03:34,zohar scribed:
> Sir,
Just to help with your English, in this list titles are not used noramlly.
Most here would be embarrased with the use of, Sir.
> On is CD-R (only reader) and other is CD-RW(burner) and I want to keep
> both so that if I want to copy a CD it can b
EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> On
> Behalf Of Net Llama
> Sent: Friday, January 11, 2002 7:45 AM
> To: [EMAIL PROTECTED]
> Subject: RE: StepXStep CD BURNERS-IDE
>
> Unless you have a really, really weird CDRW, it doesn't reside in an
> OS,
> its a physi
should I purchase external modem.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On
Behalf Of Net Llama
Sent: Friday, January 11, 2002 7:45 AM
To: [EMAIL PROTECTED]
Subject: RE: StepXStep CD BURNERS-IDE
Unless you have a really, really weird CDRW, it doesn't resi
At 06:14 PM 1/10/2002 -0800, you wrote:
>Unless you have a really, really weird CDRW, it doesn't reside in an OS,
>its a physical device.
>Setting it up is the same exact process as you used to setup the CDR.
>If you don't mind me asking, why do you have 2 burners on the same box?
>
>That is perha
asking from where I will find the STEP x STEP tutorial for this.
>
> If I am still unclear you can mail me again.
>
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> On
> Behalf Of Net Llama
> Sent: Wednesday, January 09, 2002 10:44 PM
STEP x STEP tutorial for this.
If I am still unclear you can mail me again.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On
Behalf Of Net Llama
Sent: Wednesday, January 09, 2002 10:44 PM
To: [EMAIL PROTECTED]
Subject: RE: StepXStep CD BURNERS-IDE
--- zohar
On Thu, 10 Jan 2002 04:35, Net Llama wrote:
> Not really. I just spend my days buried in boxes where the *only* IDE
> device is a CD drive, and everything else is SCSI. So its not the least
> bit unusual for the CD drive to be /dev/hda.
You've been so picky lately across a few posts, you exhib
On Wed, 9 Jan 2002 15:11:55 -0800
Ken Moffat <[EMAIL PROTECTED]> wrote:
> Just want to see if I understand. If you add the
>
> append="hdb=ide-scsi"
>
> line to your lilo.conf, then does that line cause the scsi module to
> load? Or do you need to compile scsi support in to the kernel, AND use
On Thu, 10 Jan 2002 09:11,Ken Moffat scribed:
> Just want to see if I understand. If you add the
>
> append="hdb=ide-scsi"
>
> line to your lilo.conf, then does that line cause the scsi module to load?
> Or do you need to compile scsi support in to the kernel, AND use that
> line? And if you have
On Tue, 08 Jan 2002 16:59:40 -0800 "Robert L. Hemus" wrote:
> Tn the step by steps to install a CDROM RW in step 2 it says you add
> "hd?=ide-scsi to the kernel line in your menu.lst file."
> then reboot.
> When I do this it won't reboot. Need to use the rescue disk. Is the
> file I need to
Just want to see if I understand. If you add the
append="hdb=ide-scsi"
line to your lilo.conf, then does that line cause the scsi module to load?
Or do you need to compile scsi support in to the kernel, AND use that
line? And if you have hdb and hdc, cd-rw and dvd, do you need to add
hdc=ide-scs
On Wed, 9 Jan 2002 09:11:10 -0800 (PST)
Net Llama <[EMAIL PROTECTED]> wrote:
> --- Ken Moffat <[EMAIL PROTECTED]> wrote:
> > in Libranet linux I once tried
> > append="hdb=ide-scsi hdc=ide-scsi"
> > and locked up on reboot with a crc error
> > during a time of heavy experimenting.
>
> That's n
--- zohar <[EMAIL PROTECTED]> wrote:
> I have also to install 16x CD-RW on Linux partition which is now only
> on
> my windows partition. Can you please say me where I have to go on the
> net for that.
I'm not following you here. Do you need help installing Linux, setting
up a CDRW in Linux, o
--- Ken Moffat <[EMAIL PROTECTED]> wrote:
>
>
> On Wed, 9 Jan 2002 20:27:02 +1000
> Keith Antoine <[EMAIL PROTECTED]> wrote:
>
> > You should edit the /boot/grub/menu.lst AFAIK there is no
> /root/boot. I
> have > never seen a crash or failed reboot due to the append
> hdx=ide-scsi
> string.> H
--- Mike Andrew <[EMAIL PROTECTED]> wrote:
> On Wed, 9 Jan 2002 15:03, Net Llama wrote:
>
> > > the ? means use the letter b,c or d. Ie whichever is your cd ide
> > > drive.
> >
> > Note: it could also be the letter 'a'.
>
> Yeah, right. and the boot hard drive *might* be d, or scsi.
>
> You'r
On Wed, 9 Jan 2002 21:47, Keith Antoine wrote:
> > *could* edit /etc/rc.local and type the magic words
> >
> > /sbin/modprobe ide-scsi
>
> Unfortunately this is distro dependent, or would seem so as in Suse the
> cdrom drive I want as scsi is not seen as scsi until the append is
> inserted. Also t
On Wed, 9 Jan 2002 22:08, Ken Moffat wrote:
> in Libranet linux I once tried
> append="hdb=ide-scsi hdc=ide-scsi"
> and locked up on reboot with a crc error
> during a time of heavy experimenting.
that's a completely legitimate 2.4.x syntax, and is a pretty sensible way of
allowing cdrom -> cdr
I have also to install 16x CD-RW on Linux partition which is now only on
my windows partition. Can you please say me where I have to go on the
net for that.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On
Behalf Of Robert L. Hemus
Sent: Wednesday, January 09, 20
On Wed, 9 Jan 2002 20:27:02 +1000
Keith Antoine <[EMAIL PROTECTED]> wrote:
> You should edit the /boot/grub/menu.lst AFAIK there is no /root/boot. I
have > never seen a crash or failed reboot due to the append hdx=ide-scsi
string.> However the way that is inserted into the boot parameters does
On Wed, 9 Jan 2002 10:59,Robert L. Hemus scribed:
> Tn the step by steps to install a CDROM RW in step 2 it says you add
> "hd?=ide-scsi to the kernel line in your menu.lst file."
> then reboot.
> When I do this it won't reboot. Need to use the rescue disk. Is the
> file I need to work on in
On Wed, 9 Jan 2002 12:29,Mike Andrew scribed:
> On Wed, 9 Jan 2002 12:29, Robert L. Hemus wrote:
> > Tn the step by steps to install a CDROM RW in step 2 it says you add
> > "hd?=ide-scsi to the kernel line in your menu.lst file."
>
> the ? means use the letter b,c or d. Ie whichever is your c
On Wed, 9 Jan 2002 15:03, Net Llama wrote:
> > the ? means use the letter b,c or d. Ie whichever is your cd ide
> > drive.
>
> Note: it could also be the letter 'a'.
Yeah, right. and the boot hard drive *might* be d, or scsi.
You're currently buried deep in programming aren't you.
--
http://
--- Mike Andrew <[EMAIL PROTECTED]> wrote:
> On Wed, 9 Jan 2002 12:29, Robert L. Hemus wrote:
> > Tn the step by steps to install a CDROM RW in step 2 it says you add
> > "hd?=ide-scsi to the kernel line in your menu.lst file."
>
> the ? means use the letter b,c or d. Ie whichever is your cd
--- "R. Quenett" <[EMAIL PROTECTED]> wrote:
> from Robert L. Hemus:
>
> " Tn the step by steps to install a CDROM RW in step 2 it says you add
> " "hd?=ide-scsi to the kernel line in your menu.lst file."
>
Showing us what your menu.lst file looks like might help.
> " then reboot.
> " When
Mike Andrew wrote:
>
> On Wed, 9 Jan 2002 12:29, Robert L. Hemus wrote:
> > Tn the step by steps to install a CDROM RW in step 2 it says you add
> > "hd?=ide-scsi to the kernel line in your menu.lst file."
>
> the ? means, got that, OK...OL e2.4, of course..
>
> PS:
> IF you are running
Hemo wrote:
>
> On Tue, 8 Jan 2002 17:29:03 -0800, you wrote:
>
> >On Tue, Jan 08, 2002 at 04:59:40PM -0800, Robert L. Hemus wrote:
> >> Tn the step by steps to install a CDROM RW in step 2 it says you add
> >> "hd?=ide-scsi to the kernel line in your menu.lst file."
> >> then reboot.
> >> W
On Wed, 9 Jan 2002 12:29, Robert L. Hemus wrote:
> Tn the step by steps to install a CDROM RW in step 2 it says you add
> "hd?=ide-scsi to the kernel line in your menu.lst file."
the ? means use the letter b,c or d. Ie whichever is your cd ide drive.
PS:
IF you are running a 2.4 kernel the
On Tue, 8 Jan 2002 17:29:03 -0800, you wrote:
>On Tue, Jan 08, 2002 at 04:59:40PM -0800, Robert L. Hemus wrote:
>> Tn the step by steps to install a CDROM RW in step 2 it says you add
>> "hd?=ide-scsi to the kernel line in your menu.lst file."
>> then reboot.
>> When I do this it won't reboot
from Robert L. Hemus:
" Tn the step by steps to install a CDROM RW in step 2 it says you add
" "hd?=ide-scsi to the kernel line in your menu.lst file."
Is your kernel compiled with ide-scsi support? If yes try
'hdx=scsi'. The kernel configuration help for the relevant item
mentions that
On Tue, Jan 08, 2002 at 04:59:40PM -0800, Robert L. Hemus wrote:
> Tn the step by steps to install a CDROM RW in step 2 it says you add
> "hd?=ide-scsi to the kernel line in your menu.lst file."
> then reboot.
> When I do this it won't reboot. Need to use the rescue disk. Is the
> file I nee
46 matches
Mail list logo
