I need a 30 mm prop shaft, less than 3' long for my Leopard 38 cat. Can anyone
recommend a vendor? I was wondering if anyone there were any stocked for
Beneteau boats anywhere?
Lee Haefele
___
Liveaboard mailing list
Liveaboard
FYI, some Honda 2000 generators are being recalled, see below.
Lee Haefele
Begin forwarded message:
American Honda Recalls Portable Generators Due to Fire and Burn Hazards
If you have a gasoline Honda generator, it would seem prudent to immediately
check your model and serial
like local hauling,
in any case, remove all canvas and sails. The Yacht basin at icw mile 12 is
behind a lock and says they do not get surge.
Lee Haefele
On Oct 26, 2012, at 4:40 AM, Marce Schulz marcesch...@gmail.com wrote:
We've been anchored in Annapolis in Back Creek since before
Many boaters look for their friends after each of Chris Parker's morning
weather forecasts. This is on Marine frequencies. See
http://mwxc.com/marine_weather_services.php for a schedule.
Lee Haefele
On Oct 8, 2012, at 11:50 PM, Craig sai...@aisc.biz wrote:
Thanks for the reply
Does anyone know if and when this railroad bridge opens? I am helping a friend
bring a displacement hull power boat from Long Island to Ithaca, NY via Hudson
River and Erie Canal.
Lee Haefele
___
Liveaboard mailing list
Liveaboard
I have had good service from Del City.
Lee Haefele
On Sep 5, 2012, at 12:19 PM, Norm banders...@earthlink.net wrote:
Found a good source for the heavy ring terminals I am using for my new
battery installation.
I found some good battery terminals on line.
Wire size 2/0, 3/8
Depending on what you find, oil soaked rags may make a temp seal. I use non
toxic salad oil. Unless there is something bad in your harbor mud, the Indian
River water is not toxic, I swam in it to clean boat bottom and lived.
Lee Haefele
On May 1, 2012, at 10:01 PM, JohnB catsai...@gto.net
bag and see
if the hull draws it into any leaks.
Lee Haefele
On Apr 30, 2012, at 10:49 AM, Densler, Vernon R (AS) vernon.dens...@ngc.com
wrote:
So maybe...Get some waders, some plastic sheeting, rent a big pump. Start
pumping, sheet as much of the aft hull as possible and see if I get
gas.
Lee Haefele
___
Liveaboard mailing list
Liveaboard@liveaboardonline.com
To adjust your membership settings over the web
http://liveaboardonline.com/mailman/listinfo/liveaboard
To subscribe send an email to liveaboard-j...@liveaboardonline.com
, it would begin to
stink. Replacing with PVC, with some bends via heat gun fixed the problem.
Lee Haefele
Merry Christmas to all!
___
Liveaboard mailing list
Liveaboard@liveaboardonline.com
To adjust your membership settings over the web
http
Please remove anyone fom the list that lets linkedin do this. It will never
stop.
Lee Haefele
On Oct 26, 2011, at 4:41 PM, Anita Lockamy alock...@aol.com wrote:
From Anita Lockamy
Independent Computer Games Professional
Austin, Texas Area
I'd like to add you
place.
Lee Haefele, sv Alesto 2
On Oct 10, 2011, at 4:11 AM, alock...@aol.com wrote:
WOW! You guys have sent a lot of great ideas.
Bill I are opposites when it comes to people islands. He likes the quiet
out of the way places. Those are nice I enjoy those places. However, I
enjoy being
asking if you need him to find you anything, like frozen
lobster, he seems to be OK. There are a couple of small grocery stores and I
think restaurants.
Lee Haefele
On Oct 10, 2011, at 4:29 AM, alock...@aol.com wrote:
We were thinking about going to Andros checking in. West End, I think
, but I cannot go as far as FL.
Lee Haefele
___
Liveaboard mailing list
Liveaboard@liveaboardonline.com
To adjust your membership settings over the web
http://liveaboardonline.com/mailman/listinfo/liveaboard
To subscribe send an email to liveaboard-j
Is this inlet and anchorage suitable for a 38 'catamaran, 3'8 draft? Winds
are expected to be NW 20-30. This looks like the last possible inlet
southbound before Norfolk. Anyone with experience here please advise and give
anchorage directions.
Lee Haefele
s/v Alesto2
Just had a Westchester county, ny police boat yell at me that I needed to post
an American flag. Is there really such a regulation?
Lee Haefele
___
Liveaboard mailing list
Liveaboard@liveaboardonline.com
To adjust your membership settings over
Documented. Have had recent USCG inspection, no mention of flag.
Lee Haefele
On Oct 2, 2011, at 2:42 PM, jim sims follybeachg...@gmail.com wrote:
Is your boat a documented vessel, or state registered?
On Sun, Oct 2, 2011 at 8:35 AM, Lee Haefele l...@htva.net wrote:
Just had a Westchester
In all these years, I have never seen this reg. I thought it was just a
suggestion.
Lee Haefele
On Oct 2, 2011, at 3:12 PM, jim sims follybeachg...@gmail.com wrote:
I believe any documented vessel must display the flag of documentation
at size appropriate to the length of the vessel
http://www.waterwayguide.com/navupdate.php?area=10
Latest Erie Canal info. It is quite likely that the Erie will not open this
year.
Lee Haefele
l...@htva.net
___
Liveaboard mailing list
Liveaboard@liveaboardonline.com
To adjust your membership
I did find that locks on Chamblin Canal, between Seaway and Lake Champlain, are
23' wide. I also found pictures of Lock 10, it looks destroyed.
Lee Haefele
On Aug 31, 2011, at 7:36 PM, GypsyE37@ wrote:
In a message dated 8/31/2011 4:29:41 P.M. Eastern Daylight Time,
l
http://www.tug44.org/lock-e10.jpg
Lee Haefele
l...@htva.net
___
Liveaboard mailing list
Liveaboard@liveaboardonline.com
To adjust your membership settings over the web
http://liveaboardonline.com/mailman/listinfo/liveaboard
To subscribe send an email
Air leak in suction side of fuel line, or a squishy hose on the sea water
intake will collapse.
Lee Haefele
l...@htva.net
On Jul 10, 2011, at 7:40 PM, jim sims follybeachg...@gmail.com wrote:
Looking for a touch engine diagnosis problem and the solution for a
story I'm writing Ideally
Also keep in mind that the NY Erie Canal has not fully opened yet this season.
Lee Haefele
Sent from my iPad
On May 31, 2011, at 12:24 PM, Wayne Beardsley way...@pipeline.com wrote:
Just heard the USCG information broadcast on the VHF. This is a major
issue for people transiting the ICW
I see people using IPads for a chart plotter. Why are the good recommended
APS to do this?
Lee Haefele
___
Liveaboard mailing list
Liveaboard@liveaboardonline.com
To adjust your membership settings over the web
http://liveaboardonline.com/mailman
is the 19
high model, the only actual problem is if the bread rises excessively, it
touches the broiler. The broiler is a lovely feature.
Lee Haefele
- Original Message -
From: Philip McConnell p.mcconn...@sv-gryphon.net
To: Liveaboard@liveaboardonline.com
Sent: Saturday, February 12, 2011 7
.
If you don't find anything there, scroll through the menu, using your
owner's manual, the CEF should be around 90%. 100% or less than ~80%
indicates a wiring problem still.
Lee Haefele
- Original Message -
From: Jim Lynch j...@fayettedigital.com
To: liveaboard@liveaboardonline.com
Sent
out was recommended for more heat by Force 10.
Clean the old burner holes there too.
Lee Haefele
- Original Message -
From: JohnB catsai...@gto.net
To: liveaboard@liveaboardonline.com
Sent: Saturday, February 12, 2011 8:53 PM
Subject: Re: [Liveaboard] Stoves
Also interested in a propane
I have the wild leg 3phase in my small commercial building in Spencer, NY.
We just avoid that bar in the panel boxes as we have no 3PH equipment.
Thinking about it, I will check to see if they are charging me extra for it.
Lee Haefele
In certain parts of the rural SouthWest, the utility
the balls in
place. Once the bearings go bad, there is a fast flow of water sprayed
parallel to the shaft that enters the oil system at the pump drive gear. A
very unreliable pump! After 2004 there is a different pump with a ceramic
seal.
Lee Haefele
Also, I must add, because he might not know
There is already a 1 gap, but the pressured water gets across.
Lee
Further Thoughts.
If your raw water pump is as Lee says you might want to consider drilling
some drain holes in the body of the pump between the water and the oil
seals to prevent water entering the engine.
Sometimes
another 500 hours without trouble, but it
worried me. Good news: You can buy a new bare Westerbeke motor for about
$3000.
Lee Haefele
- Original Message -
From: Kaleo svka...@gmail.com
To: liveaboard@liveaboardonline.com
Sent: Thursday, December 02, 2010 10:35 PM
Subject: [Liveaboard
We are travelling in France by car. I would like to stop at ports used by
cruisers, southern Bay of Biscay and French coast of the Med. Which are the
ports that are popular for cruisers?
Thanks for any help.
Lee Haefele
___
Liveaboard mailing list
I heard that the switch should be a key, which is in the captain's pocket.
Lee Haefele
- Original Message -
From: Sea Quell crew. sail...@purebytes.com
To: liveaboard@liveaboardonline.com
Sent: Tuesday, August 10, 2010 12:01 AM
Subject: Re: [Liveaboard] Easy CG Boardings
Our boat
I have big energy saver. My Dell netbook with solid state harddrive draws just
10 watts. This compares to 80 for a full size notebook. And, HEY, the screen
fits bifocals!
Lee Haefele
- Original Message -
From: Flying Pig
To: liveaboard@liveaboardonline.com
Sent: Tuesday
Where do I buy Lofrans parts? I need a motor for a Tigress 1200 12V
windlass.
Lee Haefele
___
Liveaboard mailing list
Liveaboard@liveaboardonline.com
To adjust your membership settings over the web
http://liveaboardonline.com/mailman/listinfo
a 12 ton jack and a huge blowtorch. No movement. We are trying Coke A Cola
next. What could shrink the rust material? With more disassembly we could
apply more heat. (Need to remove wires and hoses.)
Lee Haefele
___
Liveaboard mailing list
Liveaboard
Do the archives hide hopefully our e.mail addresses?
Lee Haefele
- Original Message -
From: S/V Sarks sv_sa...@leewardrail.net
To: liveaboard@liveaboardonline.com
Sent: Tuesday, June 29, 2010 11:45 PM
Subject: Re: [Liveaboard] Archives
Thanks for your efforts Vern.
I for one would
My 66# Claw (Fake Bruce) works everywhere that my Delta 45 did not. Cost:
$199, less if you can borrow a port supply card.
Lee Haefele
- Original Message -
From: Phil Sherwood p...@witanco.com
To: liveaboard@liveaboardonline.com
Sent: Tuesday, June 29, 2010 6:44 PM
Subject: [Liveaboard
You could use a strong solution of Lysol concentrate. I did 2 mattresses,
but it took months to dry. No more smell. Drying with a lot of sunshine
would have been better.
Lee Haefele
- Original Message -
From: Stephen Petri spe...@optonline.net
To: liveaboard@liveaboardonline.com
Sent
39 matches
Mail list logo