If anyone is interested in knowing how I got AGP to work with NVidia
drivers, the answer turned out to be very simple (but took a bit of
digging).
Simply build a kernel with Jim's ltsp_initrd_kit package config files.
During 'make config', enable MTRR support (compiled into the kernel).
Then bui
Adinda,
What version of LTSP are you using ?
I can't tell from what you've shown, but
if you are using LTSP-3.0, then
the X_MODE_800x600 parameter is no longer used.
What you would want to use instead is:
X_MODE_0 = 800x600 36 800 824 896 1024 600 601 603 625 +hsync +vsync
(Assuming those
Can i have a list about any suitable mouse protocol (for
lts.conf)?
_
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help,
My ws couldn't run GDM, here's the error:
===
(--) Trident chipset version: 0x33 (TVGA8900CL/D)
(--) SVGA: Revision 0.
(--) SVGA: chipset: tvga8900cl
(--) SVGA: videoram: 1024k
(--) SVGA: clocks: 25.31 28.32 45.37 36.16 57.86 32.73
50.61 40.37
(--) SVGA: clocks: 88.44 98.90 107.50 107.41 7
On Sat, 12 Jan 2002, Juan Carlos Zarta Escobar wrote:
> Do you know how to work with ne2100 cards ??
Hi Juan,
I'd try the lance driver; for an isa-card io will be required.
Wolfgang
_
Ltsp-discuss mailing list. To un-subsc
Hello I thank you for all your help
Do you know how to work with ne2100 cards ??
_
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For addition
Jim,
Thanks for the quick reply.
Let me clarify that I am not using an EEPROM, just a floppy.
Your advice seems to have solved part of the problem. The system no longer
continuously reboots. It now seems to hang up with a display like "searching
for server (DHCP)" and then "sleep" every so of
Rob,
I've seen a similar problem with 3c905b-tx-nm cards, but only
when trying to use a bootrom. This may not apply to the problem
that you are having.
The 3c905b has a bug in the firmware that only allows it to see an
8k bootrom. Etherboot has an option, but I don't remember
which option it i
Jim its Saturday I you should take the day off man!
(so should I)
-Original Message-
From: Jim McQuillan [mailto:[EMAIL PROTECTED]]
Sent: Saturday, January 12, 2002 1:56 PM
To: Juan Carlos Zarta Escobar
Cc: [EMAIL PROTECTED]
Subject: Re: [Ltsp-discuss] Problems when the XSERVER is not aut
Juan Carlos,
It is the pathname relative to the workstation that you
need to look at. That is, the workstation thinks
that /usr/X11R6/bin/XF86_VGA16 doesn't exist, but when
on the server, you need to look for:
/opt/ltsp/i386/usr/X11R6/bin/XF86_VGA16
I hope that helps,
Jim McQuillan
[EMAI
Hi,
your patch is very interresing!
Thanks very much : i had the same problem..
Ok, i have a question for you (excuse my english : i
am french!)
so, this is my question :
i need help to configure cdrom and sound on my
workstations. I tried ltspsound and nbd without
success! How can i u
I am trying to get workstation running with ltsp 3.0. It has a Tyan S1854
Trinity 400 motherboard (VIA 133a chipset) with a PIII. The nic is a
3C905B-TX. It has a GeForce256 video card. It looks like the workstation
gets a valid ip address but it then reboots. This happens continously until
I
Hello people
When my XSERVER is not auto the error
/usr/X11R6/bin/XF86_VGA16 No such file or directory
But this file exists!! !!!
Whats happen ??
_
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
ht
On Sat, 12 Jan 2002, Jacques B. Siboni wrote:
> Dear all,
>
> i forward the following mail to ltsp and beowulf as I use these concepts and
> Mosix group seems to be in a very depressed mood.
>
> The problem I encounter occurs before Mosix even starts. There is some new
> kind of stuff with kern
A huge thanks to _all_ who responded with suggestions.
Okay, I just spotted there has been a _very_ recent
release on rom-o-matic so I thought I'd have a go with
the new driver - the cards are Netgear, so I used the
Tulip driver. It WORKS! The drivers I downloaded 2
weeks ago fail on a Netgear 10
Hi all!
I use LTSP in a public computer access room.
Terminals are running IceWM, the only availible applications are
Galeon and StarOffice (OpenOffice).
I needed a way to use floppys on terminals, however letting the
users have a full blown file manager as MToolsFM was not
a very good option. M
Hi Y'all, Can someone help on a very basic problem please.
RH7.2 Server, provides dhcp OK, but client reports "Loading kernel",
then sleeps.
tcpdump on Server reports "udp port tftp unreachable (DF) [tos 0xc0]".
I have built several systems before, but cannot find the cause of this.
TIA
Shane
- Original Message -
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, January 12, 2002 7:17 PM
Subject: Ltsp-discuss -- confirmation of subscription -- request 679111
> Ltsp-discuss -- confirmation of subscription -- request 679111
>
> We have received a request from
Dear all,
i forward the following mail to ltsp and beowulf as I use these concepts and
Mosix group seems to be in a very depressed mood.
The problem I encounter occurs before Mosix even starts. There is some new
kind of stuff with kernel 2.4.xx that does not accept some kinds of fragments.
It is
19 matches
Mail list logo
