i am unable to print from the local netscape it gives me error
sh: lpr command not found.
I have set network printer on the same client , it prints from the
Server netscape. so the printing is enabled on the client.
Help needed urgently.
Regards
Dinesh
---
Thanks for the message and guideline,
Still i am not able to print it on the local machine , the rlpr command
gives following error
rlpr: error: connect to host :connection refused
fatal error client_open(): cannot connect to lpd
More help is needed
regards
Dinesh
--
Hello.
I want t use PXE loader for a machine having RTL 8139(x) Card.
I have loader PXE server and dhcp on the server side , following are the
errors it is giving on the client side
ERROR
PXE-E11 : APR timeout
PXE-E38 : TFTP cannot open connection
Can Anybody help me , i am using dhcp 2.x , i
Hello,
Thin client came in to lime light cause CITRIX which dominated the
industry.
Nobody seriously looked at Linux as a option. you get MS certified
people 1000 but to get linux certified is difficult.
There are lot of flavors available when you talk about Thin CLients,
1) Dos embedded so you
I have tried all the options but unable to print on the local printer
The log messages shows
ws002 ltsprtd " /dev/lp0 : no such device
Please help me
dinesh
Like to know more about how to add Module to Ltsp module directory.
_
After using the printtool utility also , the printing on local port is
not working
it shows
Status cannot open '%910' - bad file descriptor.
Suggestions welcomed
Regards
Dinesh
_
Ltsp-discuss mailing list. To un-subscrib
Original Message
Subject: LOcal printing
Date: Tue, 27 Nov 2001 16:22:50 +0530
From: vcare <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
Organization: Vcare
To: "[EMAIL PROTECTED]"
<[EMAIL PROTECTED]>
After using the printtool utility also , the pri
Getting Following error on the client side
freeing unused kernel memory :212k freed
and machine doesn't respond at all
regards
dinesh
_
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.
How to insert custom logo while booting the workstation so the user
can't see what actually happening at the backend
Thanks is advance
Regards
Dinesh
_
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
I have built the kernel with 7.1 Redhat the machine hangs at following
point
/etc/rc.setupx : 135160816 permission denied
/etc/rc.setupx /tmp/XF86Config : permission denied
/tmp/hosts:permisiion denied
I am using 7.1 with ltsp 2.08 version
If i use kernel built in 6.2 version it works properly
it for you.
>
> -enrique
>
> -Original Message-
> From: vcare [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, December 19, 2001 8:04 AM
> To: [EMAIL PROTECTED]
> Subject: [Ltsp-discuss] Permisssion denied
>
> I have built the kernel with 7.1 Redhat the machine h
Receiving following error
Fatal server error:
Server is already active for display 0
if this server is no longer running remove /tmp/.XO-lock
and start again
Help on this
Dinesh
_
Ltsp-discuss mailing list. To un-subscribe
Hello Sir,
I am using LTSP 2.08 with linux kernel built on Redhat 7.1 , i run the
runlevel 5 , it boots up very well but get struck at this point. It
works
very well with runlevel 4 .
once in went upto setting of xserver but it didn't give me login
window.
When i used kernel built with Redhat 6.
Hello Sir,
I am using LTSP 2.08 with linux kernel built on Redhat 7.1 , i run the
runlevel 5 , it boots up very well but get struck at this point. It
works
very well with runlevel 4 .
once in went upto setting of xserver but it didn't give me login
window.
When i used kernel built with Redhat 6.
Thank you for your reply,
If the kernel works with the Telnet session then the Kernel building is
proper.
It build the Xf86config file also . but enable to give me the Xlogin
screen.
It creates start_ws file also.
and passes init runlevel 5
The terminal doesn't hang but doesn't go ahead .
Once it
Hello Jim
I created separate file for the workstation, and set the proper font
path of the XFS server.
I get the blank screen without X cursor , my keyboard hangs but i can
ping the workstation from the Server.
I will require your help for upgrading to version 3.0
Let me know the where i am going
Hello Jim
As per u said i upgraded the version to 3.0
but it gives the error after mounting the NFS file system
Freeing unused kernel memory : 208k freed
Warning :unable to open initial console.
Regards
DK
_
Ltsp-discuss mail
Hello Jim
THe Lts_xcore file which is more than 10 mb in size ,
We are unable to download the file cause the server doesnot support
resumes.
Please do the needful cause here at our end it is very difficult to
download the file which is more than 10mb at one instance.
thanks
Regards
DK
___
How i can used by own Tagged Kernel with LTSP 3.0?
Which version of MKNBI utility.?
Which MKNBI utility version will work to creat the Tagged image for LTSP
3.0
When i used version 1.2.0 it basically works with default /tftpboot
directory.
Regards
DK
_
Hello, Jim
Need howto configure Xserver for SiS 6215 display adapter?
This are the more common cards here in India.
I have installed X_core , and tried XF86_SVGA , XF86_S3 and XF86_FBDev
also.
How to see the tmp files created in TMP directory from the server side?
When i go to shell prompt at wor
Hello
After ltsp 3.0 i cannot have KDE desktop on Server as well as
Workstations?
Help
regards
DK
_
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-d
I have downloaded the RPM from k12ltsp., and installed successfully.
When i add entry in lts.conf as SOUND=Y
the workstation halts at the following screen
starting syslogd
Running Sound Server
aumix: error opening mixer
Usage: init 0123456SsQqAaBbCcUu
Can you give me right direction where am i
Hello,
I am using Xmms version 1.2.5 with esound plugin , i have inserted the
host address and port number as 16001 , but it fails to start , it says
, select the proper plugin, where as when a run kMIDI player it plays
all the .mid files but not able to run .wav files.
When i loaded freeamp -- it
Can we have the list of Sound card which are supported by LTSpP with the
drivers list ?
I am using creative ISA card with LTSP 3.0 which works perfect with sb.o
, when i change the card to creative PCI card , it doesn't get
configured with any driver.
Help on this is needed.
Regards
Dinesh Karna
1) When i boot from PIII machine i810 motherboard with RTL 8029 card ,
it takes long time after mounting root filesystem
and at server side it shows a message
netdev watchdog : eth0 : transmit timed out
After certain time it goes ahead
What can be the problem?
2) How to run Video files (MPEG
I used the latest version of Xmovie but it gives me problem of lib
files so i downloaded the older version , but it is enable to give me
sound on diskless client as well as the picture quality is also
distorted
Please help me,
Regards
DK
__
I have upgraded to Gcc 3.01 , after rebooting server , i get the
following error
[drm:i810_flush_queue]:Error :lockup
What is this error and how to resolve this?
Regards
DK
_
Ltsp-discuss mailing list. To un-subscribe, or
Thanks for your reply.
I get this error on the Server Side , my XFS server doesn't start and
even i can't start my Xserver on the Server Side.
Regards
DK
_
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
I have specified the Option -128 and option -129 in dhcpd config,
But after booting the client i get stuck at the following point
Screen shows messages as follows:
***
NE* ethercard probe at 0x300: 00 80 48 e4 33 65
eth0: NE2000 found at 0x300, using IRQ 10.
Hw. address read/w
Hello,
I would like to have Multiple Xlogin with single connection . i.e my
application on one IBM server is Star-office and e-mail other server is
having Oracle forms.
how to access both the Star-office and Oracle forms from Single window.
Regards
K.Dinesh
__
Want to know how to connect to Different X-server with Single Login
Has Anybody tried GDMflexiserver by which u can connect to different
X-server at the same time .
Regards
K.Dinesh
_
Ltsp-discuss mailing list. To un-subscrib
I have multiple Xservers in my network , how i can give user a choose
option by which he can select the X-server ,
Help & Guidance needed urgently
Regards
K.Dinesh
_
Ltsp-discuss mailing list. To un-subscribe, or change pref
YOu are right i want both the thing,
1) I want a user should get selection for which server to connect
2) User should get multiple x-window Session on Ltsp-workstation.
Problem 1 is solved with giving user indirect query option.
I need solution for the Problem 2
Thanks for your reply
Regards
K.
Thank you all for multiple server Help
Now i am able to give user choice of the Application Server as well as
Toggle between the two different Server so the user can connect to
Different X-servers at the same time and Toggle between the Screen also.
once again thanks
Regards
K.Dinesh
This is not a AGP problem,
You have to specify X_mode in LTS.conf you have to specify hsync and
vsync with
800x600 resolution.
this was describe in ltsp 2.8 version. very well
I faced the same problem , and was successful to solve it.
Regards
dinesh Karnad
Proex Solutions Pvt.Ltd.
website:www.pr
Read your post for 500 Nos Thin Client ,
There are two products which will work with LTSP,
One is the popular know THIN CLIENTS which are manufactured by WYSE /
Neoware / VXL etc. These Thin Clients come with a embedded Linux Client
and Citrix Ica client also.
These connects to Linux server (with
ed as to why you
> said the Linux server wouldn't have LTSP on it. Does this mean these clients
> can't use PXE to connect to a LTSP server, but only Linux itself?
>
> Thanks
>
> > -Original Message-
> > From: vcare [mailto:[EMAIL PROTECTED]]
> >
d be greatly appreciated.
>
> Barry McCormick
> BMac2 Productions
> [EMAIL PROTECTED]
>
> - Original Message -
> From: "vcare" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
> Sent: Thursday, April 25, 2002 12:33 AM
>
i want to Run dos application , without using Dosemu--- any other option
or program by which i can run Dos Apps.
Urgent
K.D
_
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.
gt; Brazil.
>
> On Sun, 28 Apr 2002, vcarecrc wrote:
>
> > Thanks for your info, i am planning to use Dosemu only , but io read a post that it
> > works ery slow , is it true?
> > I want to access dos applications stored on Novell server. our ERP software is a
>dos
> &g
Does the kernel which comes with the distribution supports IPX protocol
?
If not
then how we should add the IPX.o to the kernel , i want to use Freedos
to access Novell using dosemu.
Regards
K.Dinesh
___
Have big pipes? SourceForge
Is the site is down , i am not able to download anything from the site.
It gives me error.
Regards
K.D
___
Have big pipes? SourceForge.net is looking for download mirrors. We supply
the hardware. You get the recognition. Email Us: [E
hen, stop by the #ltsp IRC channel on irc.openprojects.net and
> we should be able to help you.
>
> Jim McQuillan
> [EMAIL PROTECTED]
>
> On Thu, 2 May 2002, vcare wrote:
>
> > Does the kernel which comes with the distribution supports IPX protocol
> > ?
> > If not
> > the
Thanks for your reply,
In Lts.conf my mouse is set to ttyS1 only and not at ps/2 .
While booting the kernel it detected the ps/2 mouse port.
Is there any setting while configuring the kernel where u have to
specify the Mouse.
My Xf86 Config also shows the mouse set to ttyS1.
How can i log the boo
I am using Serial mouse and it is not getting configured.
error as you know
Warning: /dev/ttyS1 unable to get status of mouse fd ( Input /Output
error)
Hans
I am using dosemu to connect to Novell server , when i login as root i
am able to connect to novell server from Console as well as from
wor
I am not able to configure a old creative 16 PNP ISA card . it shows
that there is IRQ Conflict at no 7 ,
It recognizes the I0 at 220. it says sb.o 4.3(OK)
In my Lts.conf
I have added smodule_01= uart401.o
smodule_02= sb.o
smodule_03=opl03.o
If i give MOdule=sb.o io=0x220 irq=5 dma=1 , it says
MOD
Thanks for the pointing out the perfect mistake.
Regards
Dinesh
[EMAIL PROTECTED] wrote:
> K,
>
> Take the '.o' off of the module names.
>
> Jim McQuillan
> [EMAIL PROTECTED]
>
> On Wed, 22 May 2002, vcare wrote:
>
> > I am not able to configur
I am using a mediagx thinclient which boots ups into X-windows but there
is long keyboard delay when i type a user name nothing appears on the
screen same with the password also.
When i press ctr+alt+f1 try to find out what could be the error , and
again come back to Ctr+alt+f2 i can see the scre
I am able to get the login window but there Keyboard and Mouse doesn't
move.
I am using XF86_SVGA driver. it only support 8bit
I have found one Xfree86_cyrix.tar file from internet , it is Xserver
file for geode processors where the xserver even support 16 bit.
How to add this Xserver with the LT
I am able to get the login window but there Keyboard and Mouse doesn't
move.
I am using XF86_SVGA driver. it only support 8bit
I have found one Xfree86_cyrix.tar file from internet , it is Xserver
file for geode processors where the xserver even support 16 bit.
How to add this Xserver with the LT
I will be interested in how u implemented the ICEWM desktop, cause i am
not able to implement it in my current setup.
I have installed XFCE , it works fast but more howtos for
customisations are needed.
Let me know How effecticvely implement ICEwm.
Regards
Dinesh K
Hello
Still my query regarding Cyrix Xfree86 Server is Unanswered.
I have a TAR file for cyrix Geode processor which i found on INternet ,
my question is How to Compile and how it can be used with LTSP server.
i had downloaded long back,
Looking at spec of the file , the Xfree86 server supports
thing that I really don't have time for
> at this point. It would probably take me several hours
> to figure out.
>
> Maybe there is someone else on the mailing list who can
> help out.
>
> Jim.
>
> On Mon, 3 Jun 2002, vcare wrote:
>
> > Jim ,
> >
First Activate SAMBA
Add Komba to it it gives you network Neighbourhood.
Regards
Dinesh K.
___
Don't miss the 2002 Sprint PCS Application Developer's Conference
August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm
Hello,
I am trying to load Star-office 5.2 on
IBM Server with RedHat 7.1 ,
Hardware 18.8 SCSI-HDD .
While loading Star-office5.2 it Hangs the Server , i have to Hard boot
the server.
I have LTSP loaded .
Rest all applications works perfect.
Urgent
Regards
dinesh
___
I wan to test the load on my server when 40 users connect .
I want to know any available Simulation Software for Load Testing.
where i can test the load No.of user wise and Software wise
Regards
dinesh
---
Sponsored by:
ThinkGeek at http://w
Can i publish a application which is stored on the Linux Server using
LTSP.
I want to combine windows network with Linux LTSP where the windows
client will use XDMCP software to access linux applications. I want to
give them the facility to access directly the specified application
stored on the
in you do not need to run ltsp for this, ltsp is just for setting up
> the barest of thin clients. Otherwise the X Window system is capable, by
> itself to run remote applications and or remote desktops.
>
> Michael
>
> On Sat, 6 Jul 2002, vcare wrote:
>
> > Can i publish
I am a regular user of LTSP, and promoting Linux as well as LTSP in
INDIA.
To make User comfortable to get a feel of Linux and change his M$
habits, its a big and difficult task.
A THOUGHT
To have a LTSP client Software for windows 95-98-2000-XP ,, same like
Citrix and RDP.
so from windows mac
I have Tried this option but it is very slow on low end machines.
Thanks for your reply
Dinesh
Stephen Berry wrote:
> Try Xmanager, its a very good xserver for windows.
>
> stephen
> - Original Message -----
> From: "vcare" <[EMAIL PROTECTED]>
> To: &
TECTED]]
> >Sent: Thursday, July 18, 2002 7:52 AM
> >To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
> >Subject: Re: [Ltsp-discuss] A THOUGHT.
> >
> >Try Xmanager, its a very good xserver for windows.
> >
> >stephen
> >- Original Message -
>
As per document i have done the all settings , while executing the
scripts the following error comes
permission denied.
If i put local ip-address of the machine instead of HOST name , it shows
PBINDPROC_DOMAiN: domain not found.
where i am going wrong.
Suggest me
Regards
Dinesh K
-
I am unable to run Netscape as a Local Apps , the following error
occurred when loading netscape
As per document i have done the all settings , while executing the
scripts the following error comes
permission denied.
If i put local ip-address of the machine instead of HOST name , it shows
PBINDPR
I want to attach HP 845 USB printer to my LTSP workstation,
How i can do that , Cause only Serial and parallel printer are mentioned
in the documentation
Please Advise Me
Regards
Dinesh Karnad
---
This sf.net email is sponsored by: Jabber - T
How to run Sound server using redhat 7.3 and KDE ,
I am not getting any sound from KDE application, i tried OSS
I know KDE uses arts sound daemon, how to activate it?
Regards
Dinesh
---
This sf.net email is sponsored by:ThinkGeek
Welcome to g
My workstation is Celeron machine with 810e motherboard and 128 MB Ram
When i boot the client i get stuck at following point
***
crc errorFreeing initrd memory :452K
EXT2-fs warning :checktime reached running e2fsck is recommended
Freeing unused kernel memory: 68K freed
EXT20fs error (device r
Hello,
I have noticed another thing on switch , which is Dlink make 24 port,
10/100 auto sensing,
When i use 10 mbps card the network performance is very poor , but when
i use 100 MBPS card the performance is very good.
I was not able to figure out the problem what was happening , when i
changed th
.
regards
Dinesh
"Charles N. Burns" wrote:
> vcare wrote:
> > Hello,
> > I have noticed another thing on switch , which is Dlink make 24 port,
> > 10/100 auto sensing,
> > When i use 10 mbps card the network performance is very poor , but when
> > i use 100 MB
I am testing a VIa Mini-ITX board which will be introduced in India this
month ,
First time i tested the Pxe loading and it was smooth..
Display had a specific problem after creating XF86 file for the board
with option "swcursor"
The display was proper.
PROBLEM : Gnome crashes when selected gnome d
How to view movies on Workstation , I am not bale to map Server CDROM ,
to the workstation.
When i run as Root on workstation - the movie works perfectly but sound
comes from the Server.
I need to run certain movies for rural schools.
Regards
K.Dinesh
--
How to view movies on Workstation , I am not bale to map Server CDROM ,
to the workstation.
When i run as Root on workstation - the movie works perfectly but sound
comes from the Server.
I need to run certain movies for rural schools.
Regards
K.Dinesh
__
I want to give access to my some users by giving them Modem on their
diskless terminals.
I don't want to configure squid proxy on my server , cause server is not
connected to internet.
Can i access modem attached to my terminal ? Can i dial out ?
I am trying to use USB as well as normal modem.
i
Merry Christmas
My query is unsolved , i want to configure Modem on my discloses
workstation , so i can give power users to browse the internet.
Help me on this
Regards
Dinesh K
---
This sf.net email is sponsored by:ThinkGeek
Welcome to geek
I am not getting login screen on the machine with mediagx processor.
I tried using XF86_SVGA but that doesn't give proper refresh on the
screen
when i use jammin settings it is doesn't give me login screen i am
getting a BLACK screen,
Help needed
regards
Dinesh K
-
Which drivers are suitable for the Mediagx motherboard , i have 20
machines for conversion.
Can i use the same Xf865530 drivers?
does it gives 16 Bit Colour ?
regards
dinesh
---
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven
I have a server with 1GB of RAM with 35 users connected, It was working
fine with
Star-office5.2 , KDE and Netscape ,
The application were accessing Swap memory regularly.
All of a sudden , it gave me Kernel error , after that the Swap area on
the hard-disk is not accessible and when the linux try
Hello,
Normally i see your lot many e-mails, where are you from ?
If you are using RTL8139 card the bootrom which u require is of 64KB you
are using 32 KB,
THe image to burn on eprom should be .bin and not lzrom.
I am from Pune India,
We can share our ideas and experiance
regards
Dinesh
---
Hello,
Normally i see your lot many e-mails, where are you from ?
If you are using RTL8139 card the bootrom which u require is of 64KB you
are using 32 KB,
THe image to burn on eprom should be .bin and not lzrom.
I am from Pune India,
We can share our ideas and experiance
regards
Dinesh
--
I want the Visual basic Virtual machine for linux , so i can run the
Visual Basic programs , on linux .
I have tried Cross-over with no success.
ANybody knows how to run VB programs on linux
I am able to run Foxpro programs on Linux without DOSEMU.
Direction on Help in this appreciated.
regards
K
I am not receiving emails for last 4 days
What is the Problem ?
regards
Dinesh
---
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com
__
Hello,
Good to know that somebody knows VXL outside INDIA, but the real story
is that Here in India , people don't realize the potential of the THIN
-CLIENT , DISKLESS computing .
We have installed more than 500 nos. of Thin-client in small city i
india.
Right from 1999 we are promoting Thin-client
I am using XF86_S3 driver for onbard s3 card , but i don't get display
proper when i load Open-office , all fonts are distrubed.
There is some HArdware Acceleration setting which gives the display
proper ,
I am stuck at what exact entry to be added In LTs conf
Rest application works perfect
I am not able to set the DPI setting for the Xfree86 driver , with old
video cards i can set the dpi setting for the station.
We require 75 x75 dpi settings for our application , on old machines i
am able to set, but with Xfree86 with it is not possible.
Ant suggestions and hints are welcome
rega
Hello,
I have changed some Lib files of LTSP to suite my Gemplus Smartcard
reader.
It works well with Intel810 motherboard , where i can run the Daemon
locally without using Local Apps.
When i Try to use the Via Mini-ITX board the machine hangs with the
error saying illegal operation. after Doing P
Hello Jim,
I would like to integrate Gemplus smartcard with its linux Drivers on
the Thin-client , it is halts after the
kernel freeing unused Memory Message.
I can ping that machine so it it actually active on the network.
As per the troubleshooting guide --it is glibc problem.
It works perfect
Hello,
A server side applet which contained in a 3 mb jar file is not getting
downloaded onto the thin client's browser, but the same is getting
downloaded onto the server.
I get an error saying error opening http connection
what could be ?
regards
dinesh
--
while running local apps
it gives following error
xlib connection to ws001:0.0 refused by server
xlib no protocol specifed
what could be th error
urgent help needed
regards
dinesh
---
This SF.Net email sponsored by: Parasoft
Error proof Web a
87 matches
Mail list logo
