Re: Tables without oldstylenums

Helge Hafting wrote: Niklas Huldén wrote: Hi! I have a lengthy (300 p) humanistic manuscript and have enabled \usepackage[osf]mathpazo as to get oldstyle figures across the whole document. However, I also have 50+ tables and if I've understood correctly one should not use oldstylenums

Apacite and long URLs

Hi, As you know, long URLs, in bibliographies styled with apacite, are not broken and are printed on a single line that gets as long as needed, even if it goes off the sheet limits. This problem is mentioned in apacite's manual, but no solution is suggested. Is there any solution yet?

Re: Old Style Figures

Hartmut Haase wrote: Hi, can someone please send me a .lyx-file where I can see how to use Old Style Figures? Here is an example file with old and new style numbers. Use view-dvi or view-PDF to see the effect. Helge Hafting oldstyle.lyx Description: application/lyx

Re: Tables without oldstylenums

Niklas Huldén wrote: Thank You for all the suggestions! I think I will stick with the oldstyle figures in the tables also for now. If someone complains about it (which I seriously doubt), I can return to your suggestions. Another suggestion: Put a TeX box immediately in front of each table,

Re: Merge documentation into one doc!

Martin A. Hansen wrote: We have discussed this before ... I wanted to find out how to adjust appendixes to replace A, B, C with Appendix A, Appendix B, Appendix C. Etc. In LyX 1.4 you did that with some ERT, but now with LyX 1.5 there is some fancy red appendix box and perhaps another way to do

Re: What is this? latex error iso-8859-7.def

Anthony Campbell [EMAIL PROTECTED] writes: Possibly related: I posted a query here a week or so ago but had no replies. When I run lyx I get a message saying: Locale en_GB could not be set. This is because I use en_GB.UTF8. I don't see anyway to tell lyx to use a different locale but in my

Re: Apacite and long URLs

In the preamble: \usepackage{url} Then, wherever you have your web link: \url{http://www..} Mateo. On Thursday 06 September 2007 08:22, Roberto Gorjão wrote: Hi, As you know, long URLs, in bibliographies styled with apacite, are not broken and are printed on a single line that gets

Re: Merge documentation into one doc!

Martin A. Hansen schrieb: I wanted to find out how to adjust appendixes to replace A, B, C with Appendix A, Appendix B, Appendix C. Etc. In LyX 1.4 you did that with some ERT, but now with LyX 1.5 there is some fancy red appendix box and perhaps another way to do what I wanted. The appendix

Re: Problem with hyperref.

Martin A. Hansen schrieb: \usepackage{hypcol} You don't need this package for general hyperlinks. For an example hyperref setup, have a look at the preamble of the EmbeddedObjects manual. If an URL contains an anchor # then something inside LyX breaks when using hyperref! The upcoming

Re: Miktex questions

Hong Son Nghiem schrieb: I have lyx 1.5.1 installed on a windows XP pro SP2 machine. All work fine except when I tried to update or install a Miktex package on the fly. There's always an error messge failure when receiving data from the peers. Log in as administrator and check if install

Re: Figure Wrap won't print

I have also had some problems with figure wraps. One reason for the figure to not show up is that it can be situated too close to a page break. It's not a good way but this issue can be solved by manually inserting a page break. Hans Kunkell Helge Hafting skrev: Lance W. Haverkamp wrote:

minimal contents for .layout file

Hi All, Can someone describe the contents and purpose of layout file in Lyx. Why is it necessary to creat/include layout file in addition to .cls file in Lyx? It will be of great help if someone can describe the minimal contents of the layout file in order to use a new class file with Lyx. I have

Re: minimal contents for .layout file

Tariq Abdullah wrote: Hi All, Can someone describe the contents and purpose of layout file in Lyx. Try Help-Customization Why is it necessary to creat/include layout file in addition to .cls file in Lyx? Because LyX doesn't understand .cls (or .sty) files. LyX can tell latex to use

Re: What is this? latex error iso-8859-7.def

Thanks for all of these comments. Actually, I was able to resolve the issue by the inelegant means of changing 2 or 3 Greek words in the text back to transliterations. This is a temporary measure, but it makes the document work again. What wasn't clear to me from the message was that it related to

where can I find the examples mentioned in the tutorial

The examples mentioned in the tutorial are simply not present. I found an examples folder but now example files in there. They seem to miss in the installer of 1.5.1 for Mac UB. Where can I get them, can't wait to start my Lyx experience... Stefan -- Stefan Tiedjex---

Fwd: Floating problems with image boxes

Hi Users, I've just started my master thesis and I use LyX 1.5.1 for this, but of course the final effect is *rendered* by pdflatex. My current problem with this document is that in final pdf I have strange large margins (as you can see in attached images) in floating boxes and sometimes picture

Re: Merge documentation into one doc!

On 9/6/07, Uwe Stöhr [EMAIL PROTECTED] wrote: Martin A. Hansen schrieb: I wanted to find out how to adjust appendixes to replace A, B, C with Appendix A, Appendix B, Appendix C. Etc. In LyX 1.4 you did that with some ERT, but now with LyX 1.5 there is some fancy red appendix box and

Re: Fwd: Floating problems with image boxes

Manveru schrieb: My current problem with this document is that in final pdf I have strange large margins (as you can see in attached images) in floating boxes and sometimes picture goes outside margins (as with jazelle and power.org http://power.org/ logo). When you you send a SMALL

Re: where can I find the examples mentioned in the tutorial

Stefan Tiedje schrieb: The examples mentioned in the tutorial are simply not present. I found an examples folder but now example files in there. They seem to miss in the installer of 1.5.1 for Mac UB. Could you please this also at bugzilla.lyx.org? You can download the examples from here:

Re: minimal contents for .layout file

On Thursday 06 September 2007 06:36, Tariq Abdullah wrote: Hi All, Can someone describe the contents and purpose of layout file in Lyx. Why is it necessary to creat/include layout file in addition to .cls file in Lyx? It will be of great help if someone can describe the minimal contents of

a way of building macros?

Hi, Is there any way of building macros in LyX? As we do in Open Office, macros that ease the process of inserting frequent strings of data, for instance. Ideally, I would like to be able to build a new toolbar with buttons to activate different macros... Is this possible? Best regards,

Re: where can I find the examples mentioned in the tutorial

On Sep 6, 2007, at 10:16 AM, Uwe Stöhr wrote: Stefan Tiedje schrieb: The examples mentioned in the tutorial are simply not present. I found an examples folder but now example files in there. They seem to miss in the installer of 1.5.1 for Mac UB. Could you please this also at

Re: a way of building macros?

On Thu, Sep 06, 2007 at 06:24:29PM +0100, Roberto Gorjão wrote: Hi, Is there any way of building macros in LyX? As we do in Open Office, macros that ease the process of inserting frequent strings of data, for instance. Ideally, I would like to be able to build a new toolbar with buttons

Re: a way of building macros?

Hi Andre, I have not a clue about where to begin looking for /lib/bin/*. Could you be more specific? I'm on Win XP. I've also found this page in the LyX's Wiki -- http://wiki.lyx.org/Tips/CommandSequences -- but I must confess that I didn't understand what was meant by .bind-file and how to

Re: a way of building macros?

[EMAIL PROTECTED] wrote: Hi Andre, I have not a clue about where to begin looking for /lib/bin/*. Could you be more specific? I'm on Win XP. Probably somewhere like c:\Program Files\LyX\..., but others will know. I've also found this page in the LyX's Wiki --

Re: a way of building macros?

Richard Heck wrote: [EMAIL PROTECTED] wrote: Hi Andre, I have not a clue about where to begin looking for /lib/bin/*. Could you be more specific? I'm on Win XP. Probably somewhere like c:\Program Files\LyX\..., but others will know. No such beast under Windows. There's a bin

Re: Fwd: Floating problems with image boxes

Manveru schrieb: I am sending you archive with my images and LyX file. Maybe some problems are cause by the mwbook document class or wmstitle.sty?? (Ehm, I said SMALL file.) The problem was that you indented the images. Floats contains paragraphs, therefore every image is in its own

lyx1.5 on PPC Mac

Hi - I have serious problems using LyX 1.5 on a PPC Mac, with OSX10.4, from the downloaded binaries. This occurs even after I re-installed my operating system, MacTex and LyX from scratch. These are as follows; 1) The export menu doesn't list the usual options. It only gives options of

Re: Tables without oldstylenums

Helge Hafting wrote: Niklas Huldén wrote: Hi! I have a lengthy (300 p) humanistic manuscript and have enabled \usepackage[osf]mathpazo as to get oldstyle figures across the whole document. However, I also have 50+ tables and if I've understood correctly one should not use oldstylenums

Apacite and long URLs

Hi, As you know, long URLs, in bibliographies styled with apacite, are not broken and are printed on a single line that gets as long as needed, even if it goes off the sheet limits. This problem is mentioned in apacite's manual, but no solution is suggested. Is there any solution yet?

Re: Old Style Figures

Hartmut Haase wrote: Hi, can someone please send me a .lyx-file where I can see how to use Old Style Figures? Here is an example file with old and new style numbers. Use view-dvi or view-PDF to see the effect. Helge Hafting oldstyle.lyx Description: application/lyx

Re: Tables without oldstylenums

Niklas Huldén wrote: Thank You for all the suggestions! I think I will stick with the oldstyle figures in the tables also for now. If someone complains about it (which I seriously doubt), I can return to your suggestions. Another suggestion: Put a TeX box immediately in front of each table,

Re: Merge documentation into one doc!

Martin A. Hansen wrote: We have discussed this before ... I wanted to find out how to adjust appendixes to replace A, B, C with Appendix A, Appendix B, Appendix C. Etc. In LyX 1.4 you did that with some ERT, but now with LyX 1.5 there is some fancy red appendix box and perhaps another way to do

Re: What is this? latex error iso-8859-7.def

Anthony Campbell [EMAIL PROTECTED] writes: Possibly related: I posted a query here a week or so ago but had no replies. When I run lyx I get a message saying: Locale en_GB could not be set. This is because I use en_GB.UTF8. I don't see anyway to tell lyx to use a different locale but in my

Re: Apacite and long URLs

In the preamble: \usepackage{url} Then, wherever you have your web link: \url{http://www..} Mateo. On Thursday 06 September 2007 08:22, Roberto Gorjão wrote: Hi, As you know, long URLs, in bibliographies styled with apacite, are not broken and are printed on a single line that gets

Re: Merge documentation into one doc!

Martin A. Hansen schrieb: I wanted to find out how to adjust appendixes to replace A, B, C with Appendix A, Appendix B, Appendix C. Etc. In LyX 1.4 you did that with some ERT, but now with LyX 1.5 there is some fancy red appendix box and perhaps another way to do what I wanted. The appendix

Re: Problem with hyperref.

Martin A. Hansen schrieb: \usepackage{hypcol} You don't need this package for general hyperlinks. For an example hyperref setup, have a look at the preamble of the EmbeddedObjects manual. If an URL contains an anchor # then something inside LyX breaks when using hyperref! The upcoming

Re: Miktex questions

Hong Son Nghiem schrieb: I have lyx 1.5.1 installed on a windows XP pro SP2 machine. All work fine except when I tried to update or install a Miktex package on the fly. There's always an error messge failure when receiving data from the peers. Log in as administrator and check if install

Re: Figure Wrap won't print

I have also had some problems with figure wraps. One reason for the figure to not show up is that it can be situated too close to a page break. It's not a good way but this issue can be solved by manually inserting a page break. Hans Kunkell Helge Hafting skrev: Lance W. Haverkamp wrote:

minimal contents for .layout file

Hi All, Can someone describe the contents and purpose of layout file in Lyx. Why is it necessary to creat/include layout file in addition to .cls file in Lyx? It will be of great help if someone can describe the minimal contents of the layout file in order to use a new class file with Lyx. I have

Re: minimal contents for .layout file

Tariq Abdullah wrote: Hi All, Can someone describe the contents and purpose of layout file in Lyx. Try Help-Customization Why is it necessary to creat/include layout file in addition to .cls file in Lyx? Because LyX doesn't understand .cls (or .sty) files. LyX can tell latex to use

Re: What is this? latex error iso-8859-7.def

Thanks for all of these comments. Actually, I was able to resolve the issue by the inelegant means of changing 2 or 3 Greek words in the text back to transliterations. This is a temporary measure, but it makes the document work again. What wasn't clear to me from the message was that it related to

where can I find the examples mentioned in the tutorial

The examples mentioned in the tutorial are simply not present. I found an examples folder but now example files in there. They seem to miss in the installer of 1.5.1 for Mac UB. Where can I get them, can't wait to start my Lyx experience... Stefan -- Stefan Tiedjex---

Fwd: Floating problems with image boxes

Hi Users, I've just started my master thesis and I use LyX 1.5.1 for this, but of course the final effect is *rendered* by pdflatex. My current problem with this document is that in final pdf I have strange large margins (as you can see in attached images) in floating boxes and sometimes picture

Re: Merge documentation into one doc!

On 9/6/07, Uwe Stöhr [EMAIL PROTECTED] wrote: Martin A. Hansen schrieb: I wanted to find out how to adjust appendixes to replace A, B, C with Appendix A, Appendix B, Appendix C. Etc. In LyX 1.4 you did that with some ERT, but now with LyX 1.5 there is some fancy red appendix box and

Re: Fwd: Floating problems with image boxes

Manveru schrieb: My current problem with this document is that in final pdf I have strange large margins (as you can see in attached images) in floating boxes and sometimes picture goes outside margins (as with jazelle and power.org http://power.org/ logo). When you you send a SMALL

Re: where can I find the examples mentioned in the tutorial

Stefan Tiedje schrieb: The examples mentioned in the tutorial are simply not present. I found an examples folder but now example files in there. They seem to miss in the installer of 1.5.1 for Mac UB. Could you please this also at bugzilla.lyx.org? You can download the examples from here:

Re: minimal contents for .layout file

On Thursday 06 September 2007 06:36, Tariq Abdullah wrote: Hi All, Can someone describe the contents and purpose of layout file in Lyx. Why is it necessary to creat/include layout file in addition to .cls file in Lyx? It will be of great help if someone can describe the minimal contents of

a way of building macros?

Hi, Is there any way of building macros in LyX? As we do in Open Office, macros that ease the process of inserting frequent strings of data, for instance. Ideally, I would like to be able to build a new toolbar with buttons to activate different macros... Is this possible? Best regards,

Re: where can I find the examples mentioned in the tutorial

On Sep 6, 2007, at 10:16 AM, Uwe Stöhr wrote: Stefan Tiedje schrieb: The examples mentioned in the tutorial are simply not present. I found an examples folder but now example files in there. They seem to miss in the installer of 1.5.1 for Mac UB. Could you please this also at

Re: a way of building macros?

On Thu, Sep 06, 2007 at 06:24:29PM +0100, Roberto Gorjão wrote: Hi, Is there any way of building macros in LyX? As we do in Open Office, macros that ease the process of inserting frequent strings of data, for instance. Ideally, I would like to be able to build a new toolbar with buttons

Re: a way of building macros?

Hi Andre, I have not a clue about where to begin looking for /lib/bin/*. Could you be more specific? I'm on Win XP. I've also found this page in the LyX's Wiki -- http://wiki.lyx.org/Tips/CommandSequences -- but I must confess that I didn't understand what was meant by .bind-file and how to

Re: a way of building macros?

[EMAIL PROTECTED] wrote: Hi Andre, I have not a clue about where to begin looking for /lib/bin/*. Could you be more specific? I'm on Win XP. Probably somewhere like c:\Program Files\LyX\..., but others will know. I've also found this page in the LyX's Wiki --

Re: a way of building macros?

Richard Heck wrote: [EMAIL PROTECTED] wrote: Hi Andre, I have not a clue about where to begin looking for /lib/bin/*. Could you be more specific? I'm on Win XP. Probably somewhere like c:\Program Files\LyX\..., but others will know. No such beast under Windows. There's a bin

Re: Fwd: Floating problems with image boxes

Manveru schrieb: I am sending you archive with my images and LyX file. Maybe some problems are cause by the mwbook document class or wmstitle.sty?? (Ehm, I said SMALL file.) The problem was that you indented the images. Floats contains paragraphs, therefore every image is in its own

lyx1.5 on PPC Mac

Hi - I have serious problems using LyX 1.5 on a PPC Mac, with OSX10.4, from the downloaded binaries. This occurs even after I re-installed my operating system, MacTex and LyX from scratch. These are as follows; 1) The export menu doesn't list the usual options. It only gives options of

Re: Tables without oldstylenums

Helge Hafting wrote: Niklas Huldén wrote: Hi! I have a lengthy (300 p) humanistic manuscript and have enabled \usepackage[osf]mathpazo as to get oldstyle figures across the whole document. However, I also have 50+ tables and if I've understood correctly one should not use oldstylenums

Apacite and long URLs

Hi, As you know, long URLs, in bibliographies styled with apacite, are not broken and are printed on a single line that gets as long as needed, even if it goes off the sheet limits. This problem is mentioned in apacite's manual, but no solution is suggested. Is there any solution yet?

Re: Old Style Figures

Hartmut Haase wrote: Hi, can someone please send me a .lyx-file where I can see how to use Old Style Figures? Here is an example file with old and new style numbers. Use view->dvi or view->PDF to see the effect. Helge Hafting oldstyle.lyx Description: application/lyx

Re: Tables without oldstylenums

Niklas Huldén wrote: Thank You for all the suggestions! I think I will stick with the oldstyle figures in the tables also for now. If someone complains about it (which I seriously doubt), I can return to your suggestions. Another suggestion: Put a TeX box immediately in front of each table,

Re: Merge documentation into one doc!

Martin A. Hansen wrote: We have discussed this before ... I wanted to find out how to adjust appendixes to replace A, B, C with Appendix A, Appendix B, Appendix C. Etc. In LyX 1.4 you did that with some ERT, but now with LyX 1.5 there is some fancy red appendix box and perhaps another way to do

Re: What is this? latex error iso-8859-7.def

Anthony Campbell <[EMAIL PROTECTED]> writes: > Possibly related: I posted a query here a week or so ago but had no > replies. When I run lyx I get a message saying: "Locale en_GB could not > be set." This is because I use en_GB.UTF8. I don't see anyway to tell > lyx to use a different locale but

Re: Apacite and long URLs

In the preamble: \usepackage{url} Then, wherever you have your web link: \url{http://www..} Mateo. On Thursday 06 September 2007 08:22, Roberto Gorjão wrote: > Hi, > > As you know, long URLs, in bibliographies styled with apacite, are not > broken and are printed on a single line that

Re: Merge documentation into one doc!

Martin A. Hansen schrieb: I wanted to find out how to adjust appendixes to replace A, B, C with Appendix A, Appendix B, Appendix C. Etc. In LyX 1.4 you did that with some ERT, but now with LyX 1.5 there is some fancy red appendix box and perhaps another way to do what I wanted. The appendix

Re: Problem with hyperref.

Martin A. Hansen schrieb: > \usepackage{hypcol} You don't need this package for general hyperlinks. For an example hyperref setup, have a look at the preamble of the EmbeddedObjects manual. If an URL contains an anchor # then something inside LyX breaks when using hyperref! The upcoming

Re: Miktex questions

Hong Son Nghiem schrieb: I have lyx 1.5.1 installed on a windows XP pro SP2 machine. > All work fine except when I tried to update or install a Miktex > package on the fly. There's always an error messge "failure > when receiving data from the peers". Log in as administrator and check if

Re: Figure Wrap won't print

I have also had some problems with figure wraps. One reason for the figure to not show up is that it can be situated too close to a page break. It's not a good way but this issue can be solved by manually inserting a page break. Hans Kunkell Helge Hafting skrev: Lance W. Haverkamp wrote:

minimal contents for .layout file

Hi All, Can someone describe the contents and purpose of layout file in Lyx. Why is it necessary to creat/include layout file in addition to .cls file in Lyx? It will be of great help if someone can describe the minimal contents of the layout file in order to use a new class file with Lyx. I have

Re: minimal contents for .layout file

Tariq Abdullah wrote: Hi All, Can someone describe the contents and purpose of layout file in Lyx. Try Help->Customization Why is it necessary to creat/include layout file in addition to .cls file in Lyx? Because LyX doesn't understand .cls (or .sty) files. LyX can tell latex to use

Re: What is this? latex error iso-8859-7.def

Thanks for all of these comments. Actually, I was able to resolve the issue by the inelegant means of changing 2 or 3 Greek words in the text back to transliterations. This is a temporary measure, but it makes the document work again. What wasn't clear to me from the message was that it related to

where can I find the examples mentioned in the tutorial

The examples mentioned in the tutorial are simply not present. I found an examples folder but now example files in there. They seem to miss in the installer of 1.5.1 for Mac UB. Where can I get them, can't wait to start my Lyx experience... Stefan -- Stefan Tiedjex---

Fwd: Floating problems with image boxes

Hi Users, I've just started my master thesis and I use LyX 1.5.1 for this, but of course the final effect is *rendered* by pdflatex. My current problem with this document is that in final pdf I have strange large margins (as you can see in attached images) in floating boxes and sometimes picture

Re: Merge documentation into one doc!

On 9/6/07, Uwe Stöhr <[EMAIL PROTECTED]> wrote: > Martin A. Hansen schrieb: > > > I wanted to find out how to adjust appendixes to replace A, B, C with > > Appendix A, Appendix B, Appendix C. Etc. In LyX 1.4 you did that with some > > ERT, but now with LyX 1.5 there is some fancy red appendix box

Re: Fwd: Floating problems with image boxes

Manveru schrieb: My current problem with this document is that in final pdf I have strange large margins (as you can see in attached images) in floating boxes and sometimes picture goes outside margins (as with "jazelle" and " power.org " logo). When you you send a SMALL

Re: where can I find the examples mentioned in the tutorial

Stefan Tiedje schrieb: The examples mentioned in the tutorial are simply not present. I found an examples folder but now example files in there. They seem to miss in the installer of 1.5.1 for Mac UB. Could you please this also at bugzilla.lyx.org? You can download the examples from here:

Re: minimal contents for .layout file

On Thursday 06 September 2007 06:36, Tariq Abdullah wrote: > Hi All, > > Can someone describe the contents and purpose of layout file in Lyx. > Why is it necessary to creat/include layout file in addition to .cls file > in Lyx? > It will be of great help if someone can describe the minimal

a way of building macros?

Hi, Is there any way of building macros in LyX? As we do in Open Office, macros that ease the process of inserting frequent strings of data, for instance. Ideally, I would like to be able to build a new toolbar with buttons to activate different macros... Is this possible? Best regards,

Re: where can I find the examples mentioned in the tutorial

On Sep 6, 2007, at 10:16 AM, Uwe Stöhr wrote: Stefan Tiedje schrieb: The examples mentioned in the tutorial are simply not present. I found an examples folder but now example files in there. They seem to miss in the installer of 1.5.1 for Mac UB. Could you please this also at

Re: a way of building macros?

On Thu, Sep 06, 2007 at 06:24:29PM +0100, Roberto Gorjão wrote: > Hi, > > Is there any way of building macros in LyX? As we do in Open Office, > macros that ease the process of inserting frequent strings of data, for > instance. Ideally, I would like to be able to build a new toolbar with >

Re: a way of building macros?

Hi Andre, I have not a clue about where to begin looking for "/lib/bin/*". Could you be more specific? I'm on Win XP. I've also found this page in the LyX's Wiki -- http://wiki.lyx.org/Tips/CommandSequences -- but I must confess that I didn't understand what was meant by ".bind-file" and

Re: a way of building macros?

[EMAIL PROTECTED] wrote: Hi Andre, I have not a clue about where to begin looking for "/lib/bin/*". Could you be more specific? I'm on Win XP. Probably somewhere like c:\Program Files\LyX\..., but others will know. I've also found this page in the LyX's Wiki --

Re: a way of building macros?

Richard Heck wrote: [EMAIL PROTECTED] wrote: Hi Andre, I have not a clue about where to begin looking for "/lib/bin/*". Could you be more specific? I'm on Win XP. Probably somewhere like c:\Program Files\LyX\..., but others will know. No such beast under Windows. There's a bin

Re: Fwd: Floating problems with image boxes

Manveru schrieb: I am sending you archive with my images and LyX file. Maybe some problems are cause by the mwbook document class or wmstitle.sty?? (Ehm, I said SMALL file.) The problem was that you indented the images. Floats contains paragraphs, therefore every image is in its own

lyx1.5 on PPC Mac

Hi - I have serious problems using LyX 1.5 on a PPC Mac, with OSX10.4, from the downloaded binaries. This occurs even after I re-installed my operating system, MacTex and LyX from scratch. These are as follows; 1) The export menu doesn't list the usual options. It only gives options of