Re: [M100] Battery Question

erfect, but> > good enough. > > If you pursue tweaking the battery light circuit I hope you write > it up...> > Jack > > > > > > On 6/12/18, Kurt McCullum wrote: >> Yes, I'm comfortable with soldering a new resistor, but the NEC was >>

Re: [M100] Battery Question

;m sure it would be possible to adjust the threshold where the LED > illuminates to match the new battery chemistry. It's probably a > resistor change.> > Are you comfortable with soldering on the logic board? > > Doug > > On Wed, 13 Jun. 2018, 12:36 pm Kurt McCullum, &g

[M100] Battery Question

I've got several battery holders for my NEC units. I have converted a couple to recharge batteries by following the instructions on Web8201.net. The 71.5k resistor was the hardest part to find and in the end I bought 100 of them. The batteries charge fine, and work ok. But what I notice is that the

Re: [M100] NEC 8201 Current Draw

Thanks Steve. On Tue, Jun 12, 2018, at 12:06 PM, Stephen Adolph wrote: > About 60 mA would be my estimate. > > > On Tuesday, June 12, 2018, Kurt McCullum wrote: >> __ >> Does anybody happen to know the approximate current draw of a fully >> loaded(64k installe

[M100] NEC 8201 Current Draw

Does anybody happen to know the approximate current draw of a fully loaded(64k installed) NEC 8201? I'm building some battery packs and I am trying to calculate run-time. Kurt

Re: [M100] BBSing with Model 200

John beat me to the reply. the 16byte buffer get overloaded before there is enough time to tell the wifi232 to stop sending. HTERM works wonders! I think it's the only way to have a terminal with that seed.I had to do quite a bit of software gymnastics to get mComm to handle 19200 with TELCOM. But

Re: [M100] BBSing with Model 200

That would seem to indicate that the only flow control is XON/XOFF. What is the max baud rate you able to run with the Wifi232 before you start loosing data? Kurt On Wed, Jun 6, 2018, at 2:33 PM, Eric Nelson wrote: > > Huh! So does that mean RTS and CTS are not connected by default? > > >? John.

Re: [M100] question on TPDD services - laddie etc.

24) & 0xFF); //$$ > outchar ((file_len >> 16) & 0xFF); > >} >outchar (checksum (resp, resp_len)); > } > > > > On Sat, Jun 2, 2018 at 9:23 AM, John R. Hogerhuis > wrote:>> >> >> On Sat, Jun 2, 2018 a

Re: [M100] question on TPDD services - laddie etc.

The file size is returned as two bytes per the protocol. As long as it returns a value less than 64k you should be fine as the packets don't care about how many are sent. Kurt On Sat, Jun 2, 2018, at 8:50 AM, John R. Hogerhuis wrote: > > On Sat, Jun 2, 2018 at 8:20 AM Stephen Adolph > wrote:>>

[M100] NEC CMT port speed

I've been reading through the technical manual for the 8201. I noticed that on page 1-2 it lists the baud rate of the cassette port at 600 or 1200 and that it is software selectable. But I don't see any reference as to where this is set. Does anyone know how to bump it from the default of 600 to 12

Re: [M100] M200 differences

My 200 was picky about the DSR/DTR lines. I seem to recall that without a loopback of those it wasn't happy. On Thu, May 31, 2018, at 7:50 AM, Gregory McGill wrote: > I had this problem with a wimodem sending xon/xoff to my term program > on a commodore and I ended up having to disable xon/off in

Re: [M100] TPDD Utility Disk

Unfortunately it only creates images with a TPDD2. If I ever get my hands on a TPDD I'll modify it. Kurt On Tue, May 29, 2018, at 11:08 PM, Jim Anderson wrote: > Kurt’s TPDD Client is a Windows program which can read/write disks > from images files using a TPDD2 connected to a serial port on the

[M100] Ram version of Sardinevfor NEC

Yet another email to see if anyone has uncovered the Ram version of Sardine for the NEC that the Ultimate ROM uses for spell checking. The 100 and 200 versions have been located and are part of the mComm software installs. But the NEC version has been something of a white unicorn.It would be on a 3

Re: [M100] Welcome new Model T'ers

Thanks for keeping things going John. It's good to see new members. Kurt McCullum On Thu, May 3, 2018, at 12:40 PM, John R. Hogerhuis wrote: > Lots of new subscribers lately. Welcome to all! > > As of today we have exactly 400 members :-) Which is about 100 more > than t

Re: [M100] New user, AA battery leakage

eck my NiCd > backup battery while I’m in there also...> > Best wishes, > Anthony > > > > On Tuesday, May 1, 2018, Kurt McCullum wrote: >> __ >> Supercap definitely won't work in a 200. Just disassembled mine to >> finally put a NiCd backup batt

Re: [M100] New user, AA battery leakage

I believe a bit more involved on both the 200 and > 102. Thanks. That would be a nice upgrade. I’ll check my NiCd > backup battery while I’m in there also...> > Best wishes, > Anthony > > > > On Tuesday, May 1, 2018, Kurt McCullum wrote: >> __ >> Superca

Re: [M100] mComm 1.80 for Android

I'll look at it tonight and see if a tweak needs to be made. Kurt On Tue, May 1, 2018, at 5:54 PM, Josh Malone wrote: >> Please let me know if you run into any problems. > > Hi Kurt. I'm trying to load dos onto a 102 now and I can't actually > tap the "load dos" button. Is there a trick to inje

Re: [M100] New user, AA battery leakage

Supercap definitely won't work in a 200. Just disassembled mine to finally put a NiCd backup battery back in and make the conversion to rechargeable AA batteries .The supercaps do work in my 102 and 8201. Kurt On Mon, Apr 30, 2018, at 5:26 PM, John Gardner wrote: > I did'nt change anything. No

Re: [M100] New user, AA battery leakage

the battery cover on the model 100 almost always breaks. There was talk of 3D printing new ones but I don't know where that project is at.The NiCd should be replaced. You will need to take the motherboard out as you said. It is not too hard to do.As far as the corrosion, you should probably just

Re: [M100] Keyboard issue

One thing you might want to check is the BCB itself. I had a few keys that were intermittent and I found a hairline crack in the BCB. If it's just one key then that probably isn't the problem but if it's multiple keys then take a look. I repaired mine with a few jumper wires soldered to the proper

Re: [M100] Got my M100!

Some thoughts. First, you may just need to let the NiCd charge for a but. Second, check the protect switch on the bottom of the laptop. If you do need to replace it, here is the battery you need. https://www.ebay.com/itm/3-6V-14h-6mA-Rechargable-Battery-2x-Cells-Ni-Cd-60mAh/352134687427 I'm not su

Re: [M100] TS-DOS 4.x (ROM version) for M100

DOS 4.x (ROM version) for M100 shift down bug? On 17 April 2018 at 09:55, Kurt McCullum wrote: > http://www.club100.org/library/librom.html > > Be aware that this version has the shift down bug when you have more > than 2 screens of files to show. > > There is also SARDOS, a blen

Re: [M100] TS-DOS 4.x (ROM version) for M100

?&direction=0&order=&directory=Kurt McCullum/SARDOS On Tuesday, April 17, 2018 8:34 AM, Mike Stein wrote: #yiv8973127000 P.yiv8973127000MsoNormal {MARGIN:0px;}#yiv8973127000 P.yiv8973127000MsoNoSpacing {MARGIN:0px;}Where can I find a ROM image of TS-DOS 4.x for the M100? TIA, m

Re: [M100] mComm 1.80 for Android

: Thursday, April 05, 2018 10:29 AM To: m...@bitchin100.com Subject: Re: [M100] mComm 1.80 for Android Any recommendations for an Android TV box? I assume just about any one would work fine for this purpose. On Thu, Apr 5, 2018 at 12:28 AM, Kurt McCullum mailto:kurt.mccul...@att.net> > wro

[M100] mComm 1.80 for Android

I just uploaded a new Android version of mComm to the members file area. I managed to add a few things. First, when you plug in a FTDI or Prolific adapter, mComm will start and ask you if you want to associate the two. If you click yes, then it will stay like that and not ask you again. Second ite

Re: [M100] Android TV TDPP Box

it stands this requires lots of > tapping on my part, partly because it's constantly re-asking for > serial device permission :( > > On Sat, Mar 31, 2018 at 2:11 PM, Kurt McCullum wrote: > > I’ve been working on my stand alone Android TV TPDD box. Initial tests are >

[M100] Android TV TDPP Box

I've been working on my stand alone Android TV TPDD box. Initial tests are very promising. I have managed to tweak mComm so that whenever a USB to serial adapter is inserted into an Android TV Box (Or phone), mComm starts. I've added an AutoStart checkbox to it to tell the software to go into TPDD

[M100] mComm 2.5 for Windows

I just uploaded version 2.5 of mComm for Windows. I added a DOS injector feature similar to the Android version. With it you can load TS-DOS or TEENY for the 100/200/NEC. I replaced the TELCOM mode with a virtual modem similar to the Android version. So in Telcom you can 'Dial' a Telnet BBS site by

Re: [M100] Power Adapter Questions

tra voltage is usually dissipated in heat, which could possibly > cause a problem with extended use. > > How about just colour-coding the connectors and jacks? > > m >   - Original Message - >   From: Kurt McCullum >   To: Model 100 Discussion >   Sent:

[M100] Power Adapter Questions

 A quick power question for those who may be able to answer this question. On my NEC 8201 the AC power adapter is rated for 8.5 volts. The AC power adapter for my 100/102/200/TPDD2 is 6v. I have both on my desk but get them mixed up at times even though I try not to. The units seem happy with ei

Re: [M100] View80 For NEC

That is my recollection as well. So View80 looks to be the only solution. It works from the ROM but I don't normally have that ROM installed and having the RAM version would be great. Kurt On Wednesday, March 14, 2018 12:29 PM, John R. Hogerhuis wrote: Oh yeah. I remember Gary saying

Re: [M100] View80 For NEC

Ultrascreen is a similar utility. But it was my understanding that it didn't exist for the NEC 8201. If it does then I'd certainly be interested in it. I don't have access to Club100 here at work but I'll check tonight. Kurt On Wednesday, March 14, 2018 12:07 PM, John R. Hogerhuis wrote:

[M100] View80 For NEC

Does anyone happen to have the stand alone (RAM) version of View80. I know it's in the UR-2 ROM but I believe that it existed as a stand alone CO file as well. Kurt

Re: [M100] batteries...

: Re: [M100] batteries... Just curious: why? A good quality replacement would probably last at least another ten years. m - Original Message - From: Kurt McCullum <mailto:kurt.mccul...@att.net> To: m...@bitchin100.com <mailto:m...@bitchin100.com> Sent: Frid

Re: [M100] batteries...

I run my 200 without a backup battery. It doesn’t hurt anything to run that way. But you have to be careful not to lose memory contents when changing batteries. I keep mine plugged into the AC adapter when I do. Just not as easy as with a backup battery. Kurt From: M100 [mailto:m100-boun

Re: [M100] TPDD cable “passive” circuitry

I can vouch that the regular cable works when connected to a PC. Given a null modem in between it. I used that setup when I wrote TPDDClient in order to backup disk images to my PC. There may have been a special LapDOS cable but it certainly isn’t necessary. At least not with today’s PCs. Ku

Re: [M100] M102 BBSing

Hterm is the one you want to use. Its the only program that deals with flow control problem directly on the m100. You can find it on bitchin100 Kurt On Feb 26, 2018 1:37 PM, Eric Nelson wrote:I use my M102 a bit for contacting telnet BBSs using a Wifi232 modem. It works okay. Is there a better ter

Re: [M100] Introduction

Welcome to the list Eric. Kurt On Feb 24, 2018 12:06 PM, Eric Nelson wrote: > > Hello! > > I wanted to give a quick introduction. My name is Eric and I live in > California and I'm new to the list. I have owned my Model 102 for about > 2+ years now. I use it on a weekly basis for note taking

Re: [M100] Droid and the Model T

Daryn, It may be neglected but I appreciate you putting it together. I'll keep a link to it for the next time someone asks for instructions. Kurt On Thursday, February 22, 2018 12:32 PM, Daryn Hanright wrote: It was me! My dear old neglected PalmHeads website. Ha. Daryn On 23/02/2018 2

Re: [M100] Droid and the Model T

I have never seen that writeup before but thanks to whoever took the time to document the Android version. The Windows version has better documentation. But to answer your question about which tablet. Any that has an os greater that 4.4 and supports USB otg. I think 4.2 works also but I have never

Re: [M100] List of wanna haves

Interesting. Did you ever get the 3.5" disks to work? Kurt From: M100 [mailto:m100-boun...@lists.bitchin100.com] On Behalf Of Mike Stein Sent: Friday, February 16, 2018 3:28 PM To: m...@bitchin100.com Subject: Re: [M100] List of wanna haves Some DVI pics from way back when we were explo

Re: [M100] digital audio recorders en lieu of cassette recorders?

I have used the Sony ICD-PX333 digital recorder and also an earlier version the ICD-??720 with great success. Before I was able to get mComm on my Android phone, the Sony was my main storage device when I wasn't near a computer that I could sync to. The cables are easy to build with a 5 pin din. Ju

Re: [M100] Printers

Printers is the one area where I have quite a bit of excess. I have three that I use. First is the wide carriage Citizen GSX-245 which was new in the box for $25. Quite a deal and I managed to pick up a bunch of ribbons for cheap! My old brother laser printer with a parallel port still gets a bi

Re: [M100] List of wanna haves

>3. Something like the NADSBOX>Never had the chance to get one. If you have an android phone, try mComm for Android. That's the closest you will get to the NADSBOX. It emulates your standard TPDD and adds the Sardine Spell Check as well as a virtual modem mode for 'dialing' Telnet BBS sites. The

Re: [M100] Portable computing mag 1986 uploading to Archive.org

Thanks for doing this Josh. Can you post the links when you done. KurtOn Jan 26, 2018 1:21 PM, Josh Malone wrote: > > All, > > I number of years ago, I facilitated uploads of a large number of > M100-focused documents to the Internet Archive. During a disk cleanup > today, I discovered that my

Re: [M100] null modem

There is a pinout in the mComm manual in the members file area of Club100.org. It is under my name. Brian has tested a number of off the shelf cables and found several that work. But if you want the pinout, check the manual I put together. Kurt McCullum On Wednesday, January 10, 2018 3:48

[M100] mComm Android

All, If you are using mComm for Android with a Bluetooth device, you should download version 1.73 which I just uploaded. I was made aware (Thanks Jim) that 1.71 had a bug which prevented Bluetooth connections from working properly. Kurt

Re: [M100] mcomm difficulties solved

ykopat.slu.se > ____ > Från: M100 [m100-boun...@lists.bitchin100.com] för Kurt McCullum > [kurt.mccul...@att.net] > Skickat: den 2 januari 2018 20:52 > Till: m...@bitchin100.com > Ämne: Re: [M100] mcomm difficulties > > Jonathan, > >

Re: [M100] T102 hardware flow control

I ran into similar buffer over runs when developing the virtual modem service for mComm. The model-t can’t process data fast enough for anything more than 600bps. I ended up having to add routines to check for xon/xoff more frequently instead of relying of the serial port to handle it. That solv

Re: [M100] mcomm difficulties

ther. -- bkw On Jan 4, 2018 5:07 PM, "Kurt McCullum" mailto:kurt.mccul...@att.net> > wrote: It hasn't been a problem mainly due to the m100 user not naming their files with asterisks in it. Unfortunately, T-Base does so I made the tweak for one character. the &qu

[M100] mComm Updates

members file area under my name. Kurt McCullum

Re: [M100] mcomm difficulties

It hasn't been a problem mainly due to the m100 user not naming their files with asterisks in it. Unfortunately, T-Base does so I made the tweak for one character. the "*" ---> "^". This is a simple fix and it works. As Brian pointed out, any other TPDD server can still read the file. Worse case

Re: [M100] mcomm difficulties

Thanks Jim, I almost put the wrong character replacement in the code. A beta is in your email. Kurt -Original Message- From: M100 [mailto:m100-boun...@lists.bitchin100.com] On Behalf Of Jim Anderson Sent: Wednesday, January 03, 2018 6:00 PM To: m...@bitchin100.com Subject: Re: [M100] mc

Re: [M100] mcomm difficulties

Since the Android version works as is by translating CUST*S.DO -> CUST~S.DO I'll change the Windows version to match. The tilde seems to be a good character to replace with without causing problem. Also, thanks for the bug tip about the append problem. I'll tweak that while I'm in there as well.

Re: [M100] mcomm difficulties

the android version does this filename translation.                   jim   From: M100 [mailto:m100-boun...@lists.bitchin100.com]On Behalf Of Kurt McCullum Sent: Tuesday, January 02, 2018 11:53 To: m...@bitchin100.com Subject: Re: [M100] mcomm difficulties   Jonathan,   From what you d

Re: [M100] mcomm difficulties

Jonathan, >From what you described, mComm and your cable are working properly. FF.XX >(C=KLSQ) isn't an error message. Those are the instructions for TEENY. K=Kill, >L=Load, S=Save, Q=Quit. Just the fact that you were able to load both TEENY and TS-DOS indicates the cable is working. The qu

Re: [M100] USB Power cord

Thanks everyone. Good to know I can just make one. Kurt -Original Message- From: M100 [mailto:m100-boun...@lists.bitchin100.com] On Behalf Of Jim Anderson Sent: Wednesday, December 27, 2017 9:59 PM To: m...@bitchin100.com Subject: Re: [M100] USB Power cord > -Original Message- >

[M100] USB Power cord

Does a USB step up power cord still exist that will provide 6v center negative with the proper plug? I know there was one available some time back but I thought I'd check. I have not seen one lately. Kurt

Re: [M100] Looking for the Barcode drivers on the 26-3846 cassette

nual is on line at http://www.classiccmp.org/cini/systems.htm but unfortunately it looks like Rich hasn't archived the drivers themselves; again, if no one else has them or knows where they can be found I'll see if Rich can be persuaded to archive them. m - Original Messag

Re: [M100] Looking for the Barcode drivers on the 26-3846 cassette

Located here BarCode Drivers M100/T200 Kurt From: M100 [mailto:m100-boun...@lists.bitchin100.com] On Behalf Of Peter Noeth Sent: Tuesday, December 12, 2017 11:43 PM To: m1

[M100] Sardine RAM version

All, John Hogerhuis found the Model 100 version of the Sardine program disk. This means that both the 200 and 100 RAM versions of Sardine have been found (We have the ROM versions). I'll include this in the next release of both the Windows and Android versions of mComm. But the NEC version is s

Re: [M100] Any writers still using an M100?

Jeff, Sorry I’m late on this email. mComm for Android requires the following. OTG cable to go from the phone to your USB to 9 pin adapter. FTDI (or other) USB to Serial adapter. DP9 to DB25 adapter with full handshaking. The manual I put up for the Windows version has a diagram of the ca

Re: [M100] Any writers still using an M100?

Writing is what prompted me to buy my first 102. Which led to a 200, 100 and 8201. And of course that also led to mComm, Sardine support and the SARDOS romguess I need to spend less time developing and more time writing. Kurt -Original Message- From: M100 [mailto:m100-boun...@li

Re: [M100] Model 200 and TPDD2

NM is a "bad file name" error. Make sure the write protect is set on the floppy disk. Turn off power to your TPDD2, then type RUN"COM:98n1enn" from BASIC and turn your TPDD on. That should do it as long as the system disk isn't corrupted. It sounds like it's a valid disk since your 100 works. O

Re: [M100] FigTronix Board

pe or corrugated cardboard, nothing that compresses. -- bkw On Mon, Oct 9, 2017 at 5:11 PM, Kurt McCullum mailto:kurt.mccul...@att.net> > wrote: Has anyone built this board. The link says that it needs to be re-tested. I just thought I’d ask before getting some. https://oshpark.com/shared_projects/m3Ugar47 Kurt

Re: [M100] FigTronix Board

n the bottom, no foam tape or corrugated cardboard, nothing that compresses. -- bkw On Mon, Oct 9, 2017 at 5:11 PM, Kurt McCullum mailto:kurt.mccul...@att.net> > wrote: Has anyone built this board. The link says that it needs to be re-tested. I just thought I’d ask before getting some.

[M100] FigTronix Board

Has anyone built this board. The link says that it needs to be re-tested. I just thought I'd ask before getting some. https://oshpark.com/shared_projects/m3Ugar47 Kurt

[M100] mComm 2.0 for Windows

For those interested, I just put version 2.0 of mComm for Windows into the members file area. mComm 2.0 New features are the ability to load any CO file into your laptop through BASIC, and a very simple Gopher client which I will probably expand upon when I get the chance. There is one other fea

Re: [M100] mComm for Android new release

the things that you'd have to configure when installing via Linux with teeny-linux - ie RAMPTOP, HIMEM etc. Installed a full working TEENY.CO! Only had todo the RUN COM 98n1E stuff at the start!Well done Kurt!DazzaOn Wed, Sep 27, 2017 at 3:48 AM, Kurt McCullum <kurt.mccullum@att.net>

Re: [M100] eBay Alert

Thanks Steve! From: M100 [mailto:m100-boun...@lists.bitchin100.com] On Behalf Of Stephen Adolph Sent: Wednesday, September 27, 2017 1:56 PM To: m...@bitchin100.com Subject: Re: [M100] eBay Alert https://oshpark.com/shared_projects/xdmekBsD here is the PCB, pretty straightforward. Docs sp

[M100] eBay Alert

For those in need of memory for their Tandy 200 Tandy 200 Memory Modules Kurt

[M100] mComm for Android new release

All, I just finished a new version of mComm for Android devices. The only thing added to this version is the ability to inject TS-DOS or TEENY into a laptop through BASIC. mComm 1.70 I'm still working on the Windows version of mComm. I've got a couple things to button up but I'll get it done so

Re: [M100] OSHPark design tool

i/index.php/User:Computerdoc  From: M100 [mailto:m100-boun...@lists.bitchin100.com] On Behalf Of Kurt McCullum Sent: Saturday, September 16, 2017 12:05 AM To: m...@bitchin100.com Subject: [M100] OSHPark design tool  I’m trying my hand and reproducing the OPTROM board I have here for 27C256 EPROMS and

Re: [M100] TS-DOS direct loader

I release it. I may take the Gopher client out to save time but I'd like to release it all at once. Kurt On Thursday, September 21, 2017 10:26 PM, Willard Goosey wrote: On Thu, 21 Sep 2017 16:51:53 +0000 (UTC) Kurt McCullum wrote: > Guys, > Version 2 of mComm is still

Re: [M100] TS-DOS direct loader

ing com7 G:4D 31 0D G:0D 0D 4D 31 G:0D G:E6 98 06 0F G:E6 80 98 66 G:CC E6 80 80 G:00 7E FF E6 G:80 E6 80 E6 G:98 06 0F E6 G:80 98 E6 98 G:66 3F 80 00 -Josh On Thu, Sep 21, 2017 at 12:51 PM, Kurt McCullum wrote: Guys, Version 2 of mComm is still a work in process but I'm adding the ability t

[M100] TS-DOS direct loader

Guys, Version 2 of mComm is still a work in process but I'm adding the ability to load CO files directly. Attached is what it kicks out when a request to load DOS100.CO is sent. You can use the attached file with any terminal program, or mComm for WIndows to load TS-DOS. >From a terminal program

Re: [M100] Getting DOS on M102 from _scratch_

Josh, I posted TSLOAD.DO a couple days ago. It's a text file that can be loaded into BASIC and when run, it will load DOS100.CO from any TPDD emulator (LaddieAlpha, mComm, DeskLink, NADSBox). I'm in the process of adding the capability to mComm to load TS-DOS directly but I'm not finished yet. I

Re: [M100] TEENY.EXE

ter. Kurt From: M100 [mailto:m100-boun...@lists.bitchin100.com] On Behalf Of John R. Hogerhuis Sent: Wednesday, September 20, 2017 3:06 PM To: m...@bitchin100.com Subject: Re: [M100] TEENY.EXE On Wed, Sep 20, 2017 at 2:44 PM, Kurt McCullum mailto:kurt.mccul...@att.net> > wrote:

[M100] TEENY.EXE

I've been trying to get TEENY.EXE to work on my desktop. I've got a USB-serial adapter set to com1 but TEENY is unable to detect a laptop. I'm having to run TEENY.EXE in a DOS box due to it being a 16bit application. Does it require a real serial port? Kurt

Re: [M100] Questions regarding REX and file transfer

I put this together this morning. It's a DO file that will create TSLOAD.CO on a 100/102. The Windows version of mComm or any terminal program can inject this into the laptop by selecting the file and then going into BASIC and typing "RUN "COM:98n1e". (19200 Baud) I would have to create and inj

Re: [M100] Questions regarding REX and file transfer

Jim, Send me the tsload.co and the basic files off list and I'll look at it. Kurt -Original Message- From: M100 [mailto:m100-boun...@lists.bitchin100.com] On Behalf Of Jim Anderson Sent: Monday, September 18, 2017 4:25 PM To: m...@bitchin100.com Subject: Re: [M100] Questions regarding RE

Re: [M100] Questions regarding REX and file transfer

>Kurt, do you know if there is an mp3 of TSLOAD.CO or would it be helpful if I >made one? No I've never made one. I haven't spent much time with TSLOAD but it may be worth trying to integrate the the BASIC loader that came with TS-DOS into mComm. I would just need to locate all 3 (100/200/NEC) v

Re: [M100] Questions regarding REX and file transfer

Dave, One easy way to put TS-DOS onto your machine is to use the TS-DOS MP3 file and play the audio from your phone or PC into the Model 100/102. TS-DOS for 100/102 >From BASIC, type the following.SOUND OFFCLEAR 0, 57089RUNM CAS:DOS100.CO The press play on your PC or phone and your 102 will load

[M100] OSHPark design tool

I'm trying my hand and reproducing the OPTROM board I have here for 27C256 EPROMS and I may look into one that will support 27C512 EPROMS with a switch. For those who have done this, I wanted to ask which CAD package you prefer when sending to OSHPark. Kurt

Re: [M100] New to the Group and "T"

Welcome to the group Dave. I can't speak to the packet Radio questions you asked but I can answer a couple of your questions. The extra 8k. The last time I checked those chips were not too expensive so I'd say yes it's worth it. You won't regret having the extra space. Files to and from a P

Re: [M100] model 200 won't power off

I had replaced the batteries in both my 102 and NEC 8201 with the capacitors. The NEC was just starting to corrode at the ends of the battery. I was thankful I caught it before it moved down to the PCB. The 102 didn’t really need to be done but I ordered 5 capacitors so I went ahead and did it.

Re: [M100] model 200 won't power off

My 200 didn’t want to power down when I swapped the battery for a super capacitor. Too much voltage so it never shut off. Just two lines across the screen. I ended up removing the super capacitor and now run it without a backup battery. That solved my problems. The power circuit is very sensitiv

Re: [M100] ROM Adapter

=downloadfile&filename=Adapter1.jpg&directory=Kurt McCullum/ROM Adapter& http://www.club100.org/memfiles/index.php?action=downloadfile&filename=Adapter2.jpg&directory=Kurt McCullum/ROM Adapter& From: M100 [mailto:m100-boun...@lists.bitchin100.com] On Behalf Of Bri

[M100] ROM Adapter

I know there have been a few adapter boards put on OSH park. Most of these user newer Eproms which, from what I have gathered reading the list, are more difficult to solder. I disassembled an old Super ROM tonight to look at the adapter board. It seems like a fairly straightforward board for conver

Re: [M100] Painting

I'm not sure, but here is the link that gave me the idea. Blue Tandy 102 I would note have picked blue as a color but he did use dry transfer decals. Kurt On Tuesday, September 5, 2017 10:41 AM, John R. Hogerhuis wrote: On Tue, Sep 5, 2017 at 9:43 AM, Kurt McCullum wrote:

Re: [M100] Painting

Dry transfer decals might work. On Tuesday, September 5, 2017 9:12 AM, John R. Hogerhuis wrote: So say I wanted to do something fun and spray paint a T102 case top either a bright white or a different color.  Is there a high quality way to redo the labels around the keys and on the ba

Re: [M100] YouTube Upload: Selling the Model 100

Nice! From: M100 [mailto:m100-boun...@lists.bitchin100.com] On Behalf Of Lee Olivares Sent: Sunday, September 03, 2017 7:35 PM To: Model 100 Discussion Subject: [M100] YouTube Upload: Selling the Model 100 Bought this RadioShack in-store training VHS on eBay back in April but finally got

[M100] TPDDClient

Just a quick note to let you all know that I uploaded a new version of TPDDClient into the members area. Jim has been helping me debug it and I think I've got most of the kinks worked out. Kurt

Re: [M100] Fresh meat! (trying not to ripple the waters)

Jim, I used one of these adapters. It was one of the few bluetooth adapters that provided RTS/CTS flow control. You are correct, you will need REX to load an image or an adapter of some kind. Although the first testing I did was with a RAM version of TS-DOS for the T200. I loaded the file with a

Re: [M100] Utility disk image from sector access

pen the write-protect tab on the disk? I have observed that it ignores an officially copied disk (made on a 720K disk using the backup utility), if the write-protect hole is closed. On Aug 23, 2017 4:05 PM, "Kurt McCullum" mailto:kurt.mccul...@att.net> > wrote: A bit too

Re: [M100] TPDD Client Link

(or to n3ytkxznju@snkmail.com for privacy) and I’ll try to get it sent within a few days.— Nuge --On Aug 25, 2017, at 11:44 AM, Kurt McCullum <kurt.mccullum@att.net> wrote:Mike,I was able to get the files for the 200 version a year or two ago. But I'm still missing the 100 and NEC version

Re: [M100] Fresh meat! (trying not to ripple the waters)

Sent from my iPad > On Aug 26, 2017, at 7:27 AM, Kurt McCullum wrote: > > Welcome to the group Jim. Sounds like you've been doing quite a bit of > research. I was surprised when you mentioned putting your TPDD folder > onto dropbox and sharing it among two machines. Nea

Re: [M100] Fresh meat! (trying not to ripple the waters)

Welcome to the group Jim. Sounds like you've been doing quite a bit of research. I was surprised when you mentioned putting your TPDD folder onto dropbox and sharing it among two machines. Neat idea. In theory this would be possible with the Android version but I would have to write code for a dire

Re: [M100] Loading multiple .DO files with TS-DOS

e end of the file. BA and CO files don't have that. Kurt On Friday, August 25, 2017 11:54 AM, John R. Hogerhuis wrote: On Fri, Aug 25, 2017 at 11:46 AM Kurt McCullum wrote: I've been using the tag feature for .DO files quite a bit and I've never seen this happen. I&#

Re: [M100] Loading multiple .DO files with TS-DOS

I've been using the tag feature for .DO files quite a bit and I've never seen this happen. I'll do a specific test when I get back to the house and let you know what I find. Seems really strange. I doubt a bug like that would have survived testing. I just did a quick test under Virtual-T and it

<    1   2   3   4   5   6   7   8   9   10   >