Any of those you pictured is good. The pla is the weakest but still
probably OK depending on the exact design of the part. abs, asa, petg
all definitely good.
I haven't looked at the model in question, but, to make a working
battery cover in general, you don't always have to *exactly* copy the
Different printing methods cost different amounts. The basic service at
shapeways is something called SLS , which is laser-sintered nylon powder.
It produces very good results in terms of both dimensional & shape accuracy
and the toughness of the part, but it's expensive.
The kind of printers peop
in my experience 3d printing is not cheap, you have to want the thing
kind of a lot
On Wed, 1 Jul 2020 at 15:50, Lee Kelley wrote:
>
> I don't know how common it is but our public library has a 3d printer and
> even though they won't print anything remotely gun related the will print
> most any
I don't know how common it is but our public library has a 3d printer and
even though they won't print anything remotely gun related the will print
most anything else for 5 cents an oz.
On Wed, Jul 1, 2020, 17:41 B 9 wrote:
> Thanks, Lee! I appreciate the expert insight. I hope Steve is able to
Thanks, Lee! I appreciate the expert insight. I hope Steve is able to rejigger
the hook tabs with slightly less overhang.
$15 for 50¢ of material sounds crazy, but I don't have a 3-D printer. Are there
any 3-D print services that aren't so expensive? My local makerspaces have
closed their door
Resident 3D Printer repair guy here: that’s expensive, you’re looking at .50c
in material for an FDM PET print.
It’s about an hour on a Prusa MK3S @ .2mm, I’m fairly certain my buddy gifted
me an M200 so maybe I can do some comparison shots.
Printer is hot and ready so I’ll just crank out a s
Very awesome! One of my M200s is missing the battery cover and looks a bit
janky with the flexible plastic I cut to fit in its place. I got cost
estimates from xometry and shapeways to see how much it'd be and it seemed
the cheapest options were $15 to $20 bucks. For example, here's Shapeways'
pric
Steve,
If possible, please try to take and upload a picture or two of the actual copy
part you did in black ABS. Prefer at least one pic to be NOT installed in its
place on the M200. Looking for a good shot of the inside where all the tabs
are and all the performance of your printer will be r
The M200 I just got was missing the battery cover, so I designed up a
replacement and 3D printed it. I donate the model to the community in case
anyone else needs one: https://www.thingiverse.com/thing:4508352
[https://cdn.thingiverse.com/assets/a6/77/57/bf/c5/featured_preview_M200_Battery_Cover.