Hey Jeff,
It's somewhere between the two - the original satellite swath is converted
to a regular 0.5 degree grid by truncating, binning, and averaging each
point's lons and lats over the top of a 720 x 360 np.zeros array. the
plotting still works fine for non ortho/ hemispherical projections,
On 4/5/10 4:16 AM, Will Hewson wrote:
Hey Jeff,
It's somewhere between the two - the original satellite swath is converted
to a regular 0.5 degree grid by truncating, binning, and averaging each
point's lons and lats over the top of a 720 x 360 np.zeros array. the
plotting still works fine
I should perhaps of explained my code (included in top post) a little better,
the values in my attached file aren't on a regular grid to start with, I do
a little bit of juggling as follows to get them into a regular grid:
I'm firstly setting up my 2D grid of 0.5 degree lat lons, followed by
All of those calls to open are being generated from the pytz import --
which is why pytz seems like the likely candidate. Is it possible you
have pytz installed as a compressed egg, or on a remote disk, or
something that may be causing a file reading penalty?
As Eric said, make sure you time
On Mon, Apr 5, 2010 at 6:39 AM, Mauro Cavalcanti mauro...@gmail.com wrote:
Dear ALL,
Good morning... Here is a question that may already have been asked
(and answered), but not to my knowledge. Matplotlib's figure windows
come with that handy navigation bar, which includes a Pan/Zoom button
On Sun, Apr 4, 2010 at 11:55 AM, Thomas Robitaille
thomas.robitai...@gmail.com wrote:
It looks as though the set_linewidth and set_linestyle commands are silently
ignored. Is this normal? I have submitted a bug report here:
linewidth and linestyle are (or looks) ignored because ticklines are
On 4/5/10 7:25 AM, Will Hewson wrote:
I should perhaps of explained my code (included in top post) a little better,
the values in my attached file aren't on a regular grid to start with, I do
a little bit of juggling as follows to get them into a regular grid:
I'm firstly setting up my 2D grid
Jeff, this is great, works fine - many thanks for all your help over the last
few days, it really is appreciated. I'm trying to build the case within my
office for switching over to Basemap from IDL, ironing out niggles like this
is really useful in this respect.
All the best,
Will.
Jeff
I think I'm using MPL .99.1 (is there a command to check?) on Windows XP.
Thanks for the debug tip, I don't think posting the whole thing is necessary
because this line seems to be the problem:
findfont: Could not match
On Fri, Apr 2, 2010 at 11:20 AM, Michael Droettboom md...@stsci.edu wrote:
It seems the relevant change is in r8102: fix some issues in the bbox
after the postscript distiller is run. This change removed a commented
out call to ps2eps. I'm a bit out of my depth here as to why that
change was
It would still be helpful to see the whole listing (send it to me
offlist) because that will indicate where fonts are being looked for,
and hopefully *why* this is failing.
It should search for fonts in the standard Windows location (usually
C:\Windows\Fonts). Have you tried setting
Ah ok, I've sent it on to you. I've just tried setting font.family to New
Century Schoolbook directly but it generates something similar. I'm
starting to think part of the problem is that I've set the home directory to
U: somehow, U: being a shared drive which doesn't have a font directory...
For the benefit of future users Googling this problem --
After an off-list discussion, we realized there were a couple of fonts
on Alex' system with the names Century Schoolbook and New Century
Schoolbook LT Std. Using one of those names instead resolved the problem.
Mike
Alex S wrote:
Ah
Yup, thanks for the help everyone
Michael Droettboom-3 wrote:
For the benefit of future users Googling this problem --
After an off-list discussion, we realized there were a couple of fonts
on Alex' system with the names Century Schoolbook and New Century
Schoolbook LT Std. Using one
Michael Droettboom wrote:
All of those calls to open are being generated from the pytz import --
which is why pytz seems like the likely candidate. Is it possible you
have pytz installed as a compressed egg, or on a remote disk, or
something that may be causing a file reading penalty?
Alan,
Thanks much for that link. I started playing with this code and after some
hacking I might get what I need. If I cobble this together successfully I'll
post the results and the code.
Josh
-
Josh Hemann
Statistical Advisor
http://www.vni.com/ Visual Numerics
jhemann at vni dizzot
On Mon, Apr 5, 2010 at 3:17 PM, Mauro Cavalcanti mauro...@gmail.com wrote:
Dear Gökhan,
Thanks for your reply, but unfortunately it was not entirely helpful.
The rectangle_selector.py exemple indeed seems to do what I want, by
means of a callback function, however in the example program
AlanIsaac wrote:
Nice.
You might want to see
http://www.edwardtufte.com/bboard/q-and-a-fetch-msg?msg_id=0001OR
if you have not already.
Alan Isaac
Thanks again Alan. I know I am abusing the term sparkline because I am not
embedding the visualization within text, but I am not sure
18 matches
Mail list logo
