I tried mixing up the recipe using Mobil 1 ATF - it would not mix at all
with the acetone. Does any other ATF mix with acetone?
On Sat, Apr 13, 2013 at 9:46 PM, Allan Streib wrote:
> I used the acetone and ATF recipe for this, and it worked well when I
> replaced the lines on my W123.
>
> Allan
On Sat, 13 Apr 2013 20:03:14 -0400 Dan Penoff wrote:
> Craig,
>
> Just to clarify, I'm not buying much of this - I got the following for
> free from the FreeCycle list:
--- snip ---
I was aware of that. BTW, are you sure the processor is good?
> ASUS made a really nice P6 MB, but the
Dan Penoff writes:
> 3.) If time permits, apply a generous amount of penetrating fluid to
> the fittings at the oil cooler. There are dissimilar metals and tend
> to gall when removed, sometimes badly enough that the oil cooler
> requires replacement.
I used the acetone and ATF recipe for this,
Tim Crone wrote:
Now to source new and be on my way. Looks easy to do, one nut on the
filter and one on the oil radiator... But since I couldn't get either to
budge I will try to add some anti sieze as someone suggested.
I assume you know to put a wrench on the hose nut and another wrench on t
Uh, no.
Wilton
- Original Message -
From: "Dan Penoff"
To: "Mercedes Discussion List"
Sent: Saturday, April 13, 2013 7:35 PM
Subject: Re: [MBZ] Antenna (1992 W140) problem
Uh, you guys did notice that the original post was from 2011, didn't you?
Dan
On Apr 13, 2013, at 6:27 PM,
Craig,
Just to clarify, I'm not buying much of this - I got the following for free
from the FreeCycle list:
> On Apr 12, 2013, at 2:21 PM, Dan Penoff wrote:
>
>>> 3 HDD's, SATA, 300GB each ( Internal )
>>>
>>> Kingston HyperX 12GB (6 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)
>>> Desktop
Uh, you guys did notice that the original post was from 2011, didn't you?
Dan
On Apr 13, 2013, at 6:27 PM, WILTON wrote:
> Try 12v to it directly, Walt, to see if it works. What else is on the fuse
> for it? Are they working?
> BTW, now that your 140 is getting "old" at 20+ years, 'you 'bout
It makes a few good points but ... what a load of crap!
-Original Message-
From: Mercedes [mailto:mercedes-boun...@okiebenz.com] On Behalf Of Mountain
Man
Sent: Thursday, April 11, 2013 8:16 PM
To: Mercedes Discussion List
Subject: [MBZ] Interesting hour long video
The cinema is interesti
1.) Do both. You're there, the other one is just as old and will fail as well,
etc.
2.) Consider doing the motor mounts while you're in there, as the driver's side
will had ego come off or at least be disconnected to get the hoses out.
3.) If time permits, apply a generous amount of penetratin
Now to source new and be on my way. Looks easy to do, one nut on the
filter and one on the oil radiator... But since I couldn't get either to
budge I will try to add some anti sieze as someone suggested.
I assume wisdom says do both at the same time?
Yes, do both. I didn't have much problem d
Yes, change both hoses. Unfortunately, too often the oil cooler threads are
damaged when the hoses are removed, so be as careful as you can, but don't be
surprised if you need to replace the oil cooler.
Research the repair, there are tips and tricks to maximize the odds of success.
Very glad
As usual, you all are right on the money. Lower oil cooler hose has a leak
in one of the seams. Even after sitting and not running the engine, when I
wiped down the hoses there is obvious oil weeping along that seam.
Now to source new and be on my way. Looks easy to do, one nut on the
filter and
Try 12v to it directly, Walt, to see if it works. What else is on the fuse
for it? Are they working?
BTW, now that your 140 is getting "old" at 20+ years, 'you 'bout ready to
make me a deal on it?
Wilton
91 350SDL (204 kmi)
87 300D (129 kmi)
- Original Message -
From: "LarryT"
To:
I have one from a old Hirschmann antenna (the collar) - you're welcome
to it if you think it'll fit. It probably came off a W108 or W123
MB... Has been laying around for years doing nothing (like a
teenager) ;-) It's chrome with a H on one side - it was just a plain
AM/FM antenna - nothin
On Sat, 13 Apr 2013 09:49:40 -0400 Dan Penoff wrote:
> If I still lived in Indy, maybe, but no Fry's in Tampa. That could be a
> good thing
>
> I do have a CompUSA close by - they are part of Tiger Direct, which may
> be good or bad, I don't know as I have never purchased anything from
> the
Like anything else - one step at a time.
Wilton
- Original Message -
From: "Craig"
To: "Mercedes Discussion List"
Sent: Saturday, April 13, 2013 2:32 PM
Subject: Re: [MBZ] OT - Motherboard Recommendations
On Sat, 13 Apr 2013 09:52:54 -0400 Dan Penoff wrote:
That's something els
On Sat, 13 Apr 2013 09:52:54 -0400 Dan Penoff wrote:
> That's something else I'll have to source - a cooling fan and heat sink
> for the CPU.
>
> This is starting to get involved...
It does get involved, but you can do it!
If you want a quiet, efficient CPU cooler, go for Noctua.
htt
Do you have a favorite S-Class? Can't decide between the '20s-'30s
prewar models and the'70s,'80s & '90s 116, 126 & 140. Don't care for the
ex-factory coachwork on the 770 shown though.
http://www.prewarcar.com/index.php?option=com_caradvert&view=ad§ion_id=1&id=72850&Itemid=212
On 4/13/2013
Yes. Grnson spent his junior college year in Menton, France, in the Foreign
Studies Program. This time will be in Paris.
Wilton
- Original Message -
From: "Rich Thomas"
To: "Mercedes Discussion List"
Sent: Saturday, April 13, 2013 11:15 AM
Subject: Re: [MBZ] OT - Grndson grad scho
Absolutely. I've stressed with all of my children and grandchildren that
one of the best and most important things, in addition to integrity and
morality, that a parent or grandparent can teach the children is to speak
well - with proper enunciation, grammar, diction, etc. After all, the
reas
I am peddling as fast as I kin
--R
On 4/13/13 12:45 PM, Dan Penoff wrote:
I think that should be "petal".
Dan
Sent from my iPad
On Apr 13, 2013, at 12:01 PM, Rich Thomas
wrote:
Cant I loosed my break peddle
--R
On 4/13/13 11:57 AM, Dan Penoff wrote:
Give me a brake.
Dan
On Apr 13,
I think that should be "petal".
Dan
Sent from my iPad
On Apr 13, 2013, at 12:01 PM, Rich Thomas
wrote:
> Cant I loosed my break peddle
>
> --R
>
>
> On 4/13/13 11:57 AM, Dan Penoff wrote:
>> Give me a brake.
>>
>> Dan
>>
>> On Apr 13, 2013, at 11:49 AM, Rich Thomas
>> wrote:
>>
>>> Yo
OK, here's a Sondy Tale for "filler." ;<)
FLYING WITH DANISH AIR FORCE
By Wilton Strickland
Sometime during the summer of 1978, I flew three days with a Danish Air
Force C-130H crew out of Sondrestrom Air Base, Greenland, where I was
Director of Engineering. During the morning of the first
Hope all goes well for 'im, you and Mom, too.
Wilton
- Original Message -
From: "Rich Thomas"
To: "Mercedes Discussion List"
Sent: Saturday, April 13, 2013 11:51 AM
Subject: Re: [MBZ] OT - Grndson grad school
Management is evaluating the various proposals, I have turned
negotiatio
https://www.facebook.com/media/set/?set=a.625040400857326.1073741855.112336898794348&type=1
-R
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery
Cant I loosed my break peddle
--R
On 4/13/13 11:57 AM, Dan Penoff wrote:
Give me a brake.
Dan
On Apr 13, 2013, at 11:49 AM, Rich Thomas
wrote:
Your all loosers
--R
On 4/13/13 11:47 AM, Craig wrote:
On Sat, 13 Apr 2013 10:12:41 -0400 Dan Penoff wrote:
We always worked on diction an
Give me a brake.
Dan
On Apr 13, 2013, at 11:49 AM, Rich Thomas
wrote:
> Your all loosers
>
> --R
>
>
> On 4/13/13 11:47 AM, Craig wrote:
>> On Sat, 13 Apr 2013 10:12:41 -0400 Dan Penoff wrote:
>>
>>> We always worked on diction and vocabulary with our kids, as we
>>> strongly believe that
Wilton
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Management is evaluating the various proposals, I have turned
negotiations over to the boy as I have done my part in identifying the
options and their associated costs on the various dimensions.
He is now saying he is interested in ortho surgery, so I am hoping in
some years he can buy me an S
Your all loosers
--R
On 4/13/13 11:47 AM, Craig wrote:
On Sat, 13 Apr 2013 10:12:41 -0400 Dan Penoff wrote:
We always worked on diction and vocabulary with our kids, as we
strongly believe that it's important to present as someone who speaks
and writes intelligently, especially in business
On Sat, 13 Apr 2013 10:12:41 -0400 Dan Penoff wrote:
> We always worked on diction and vocabulary with our kids, as we
> strongly believe that it's important to present as someone who speaks
> and writes intelligently, especially in business and employment
> situations.
Hear, hear!
Craig
I bought the controller from here http://www.hobbycnc.com/ and soldered
it up, nice package. I think he used to have kits for the whole
machine, maybe no longer.
If you go here
http://www.cnczone.com/forums/diy_cnc_router_table_machines/ there is
a variety of machine designs and plans, mi
UNC's program is that you pay the UNC tuition then get to go to some
other school outside the US. Of course, many of those schools are much
cheaper to attend, so UNC makes a pile of money on the deal.
Daughter spent a semester in Granada, Spain at the university there, the
school kicked in a
Grndson told me last night that 3 guys from DC called 'im coupla days ago to
interview him for internship there this summer. Grndson doesn't think he
did very well; 'said he stumbled a bit on a question about working with
groups - what group projects he's done, etc. I told 'im, "Don't worry ab
ATTABOY!
Wilton
- Original Message -
From: "Rich Thomas"
To: "Mercedes Discussion List"
Sent: Friday, April 12, 2013 11:41 PM
Subject: Re: [MBZ] OT: CNC mill made from random stuff
All me, my own design (sorta) and build
--R
On 4/12/13 7:08 PM, Mountain Man wrote:
--R wrote:
O
When I was in college a few years back, I was stunned at the poor writing
ability of many of he young students. Grammar, usage, and punctuation were
horrendous.
I think that was one reason why I did well. I could form cognizant thoughts and
express them in writing. Many in my cohort could not.
Oh - I am not a Freecycle god - I am a Freecycle mod. A relatively simple job,
but it does give me the opportunity to jump on good stuff when it comes up. I
rarely do, but I couldn't pass this one up.
And being first is no guarantee that the offerer will pick me, either.
I really wanted to jump
That's something else I'll have to source - a cooling fan and heat sink for the
CPU.
This is starting to get involved...
Dan
Sent from my iPad
On Apr 12, 2013, at 8:45 PM, clay wrote:
> You are a Freecycle god.
>
> I would vote for an ASUS board, as they seem to have superior build quality
I may take you up on that. Another list member has offered me a video card as
well.
No LEDs or gizmos. Just a plain Jane case with a good power supply. No windows,
water cooling, etc.
Dan
Sent from my iPad
On Apr 12, 2013, at 8:52 PM, clay wrote:
> I have a fine PCIe card, still in the seal
If I still lived in Indy, maybe, but no Fry's in Tampa. That could be a good
thing
I do have a CompUSA close by - they are part of Tiger Direct, which may be good
or bad, I don't know as I have never purchased anything from them.
What I am having a hard with s figuring out exactly what moth
Was someone looking for one of these? There is one for sale over in the
Benzworld forums for $125.
Dan
Sent from my iPad
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Uns
41 matches
Mail list logo
