On Dec 11, 2011, at 9:19 AM, Chris Bennett wrote:
this is the setup I use to upgrade and install on my remote server.
It works great. This would probably be a good purchase since you
could use it again in the future on other, later systems.
Chris Bennett
I use something similar:
On Tue, Dec 13, 2011 at 11:29:32PM +0100, Nomen Nescio wrote:
| I've built up several of the Supermicro SYS-5015A-EHF boxes (1U rack,
| dual core 1.66G Atom, dual Gb Intel LAN, IPMI) with 4GB and an SSD,
| uses less than 25w at idle and less than 30w doing a-j3 userland build
| (according to
Wesley, I think once you've logged in with a user, you're stuck
with whatever was in the config file as has been previously said as it's
created the roundcube entries in the database.
What you'll need to do
now for that user is to log into roundcube, click Personal Settings at
the top, then
On 2011-12-14, Sean Kamath kam...@moultingpenguin.com wrote:
On Dec 11, 2011, at 9:19 AM, Chris Bennett wrote:
this is the setup I use to upgrade and install on my remote server.
It works great. This would probably be a good purchase since you
could use it again in the future on other, later
On 2011-12-13, Bentley, Dain dbent...@nas.edu wrote:
Thanks for the help. I'm getting a different error now:
SQLSTATE[HY000] [1] unable to open database: /path/to/db
Can't seem to find much on this error. Something from the PHP website about
having to recompile PHP from source but it's an
* Nomen Nescio nob...@dizum.com [2011-12-14 03:33]:
I've built up several of the Supermicro SYS-5015A-EHF boxes (1U rack,
dual core 1.66G Atom, dual Gb Intel LAN, IPMI) with 4GB and an SSD,
uses less than 25w at idle and less than 30w doing a-j3 userland build
(according to my cheap little
On Wed, Dec 14, 2011 at 9:43 AM, Stuart Henderson s...@spacehopper.org
wrote:
On 2011-12-14, Sean Kamath kam...@moultingpenguin.com wrote:
On Dec 11, 2011, at 9:19 AM, Chris Bennett wrote:
this is the setup I use to upgrade and install on my remote server.
It works great. This would probably
Hi,
Very funny, i already know this tips.
But when i add a new user and try to connect on, i always have @localhost.
At Roundcube login prompt : type username@specificdomainuser doesn't work.
And type just the username work, try to send a mail, it sends with
@localhost
I know i can modify manually
On 2011-12-14 09.43, Stuart Henderson wrote:
On 2011-12-14, Sean Kamath kam...@moultingpenguin.com wrote:
On Dec 11, 2011, at 9:19 AM, Chris Bennett wrote:
this is the setup I use to upgrade and install on my remote server.
It works great. This would probably be a good purchase since you
Is anyone using OpenBSD as the 'front-end' router on a UK fibre (FTTC)
broadband circuit?
We are due to start trialling a 100Mb FTTC broadband and hope to use
an OpenBSD box as the first stage router (i.e. to replace what the
Home Hub would normally do). We know the presentation (from BT) is
Apologies, I wasn't trying to be funny. There's a few bits of
troubleshooting at
http://trac.roundcube.net/wiki/Howto_Config#ConfiguringforVirtualUsers
where it looks like they describe a similar issue to the one you're
having.
Can't help any more than that though.
On 14/12/2011 10:20,
Wesley
Hi misc@,
I'm trying to get a load balancer based on OpenBSD 5.0 and relayd running
according to
http://undeadly.org/cgi?action=articlesid=20080617010016
The special thing about the setup is that my customer runs two NATting
(Linux-based) load balancers himself, using public 123.45.67.0/24
Chris Smith obsd_m...@chrissmith.org wrote:
uses less than 25w at idle and less than 30w doing a-j3 userland build
Nice to know it. :)
I have an Compaq Proliant with two 900Mhz processors. It needs about
105w when idle. Inspite of active PFC power supply. With luck I find
a Museum that wants
A New Approach to Mental Health: Improving Outcomes for All
22nd March 2012, Manchester Conference Centre
Note: Early Bird rates available until 13th December
One in four of us will encounter a mental health problem of some kind during
our lives and one in six do so at any one time. 45% of
On 2011-12-14, percy piper piper.pe...@gmail.com wrote:
Is anyone using OpenBSD as the 'front-end' router on a UK fibre (FTTC)
broadband circuit?
Yes, running it on an Atom-based system at a customer, works great.
(It's a bit much for an alix/soekris 5501).
We are due to start trialling a
Hi,
I read a long time ago that layered softraid wasn't supported, and
when looking recently I didn't read anything which suggested that had
changed, however on the off-chance I tried it out and it seems to work
ok - at least in limited testing with 4 disks in 0+1 configuration.
Is this just
I have just tested this method with roundcube 0.7 on OpenBSD with
a blank database and it works fine there, logging in with the full
email address as specified in the left-hand column of the
virtusertable file uses the username on the right-hand-side as
the imap login name, and in prefs/identities
WEEK END - 23.12 al 26.12
PREZZO GIORNALIERO DI MEZZA PENSIONE A 45,00
- SPUNTINO DEL DOPOSCI
- BAMBINI GRATIS FINO A 2 ANNI
- BAMBINI DA 2 A 6 ANNI SCONTO DEL 50%
- BAMBINI DA 6 A 10 ANNI SCONTO DEL 25%
- PIANO FAMIGLIA CON 2 + 2 BAMBINI STESSA CAMERA = PAGANO 3 PERSONE
[PRENOTA]
SETTIMANA -
On Wed, Dec 14, 2011 at 02:01:43AM +0100, Kristaps Dzonsons wrote:
I wanted to grep a pattern from a manpage and was
very surprised I do not get normal plain text.
$ mandoc /usr/local/man/man1/context.1 | cat -ntve | sed -n '123,124p'
123 -^H--^H-v^Hve^Her^Hrs^Hsi^Hio^Hon^Hn$
ClickandBuy
ClickandBuy Kundennummer: 100260100
Startseite[IMAGE]Hilfe[IMAGE]
Sehr geehrter kunde,
Willkommen bei ClickandBuy!
Sie haben eine private Nachricht
Zum Lesen dieser Nachricht folgen Sie bitte dem Link
Klicken Sie auf und folgen Sie den Link zu dieser Nachricht lesen
Mit
After upgrading (re-installing from scratch) my firewall from 4.6 (or
4.7) to 5.0, I have not been able to get OpenVPN back working. Please
forgive me for asking here at misc but I have spent two days Googling,
reading tons of HOWTO's and trying out different solutions, but without
being able to
On Wed, Dec 14, 2011 at 5:54 PM, Erling Westenvik
erling.westen...@gmail.com wrote:
After upgrading (re-installing from scratch) my firewall from 4.6 (or
4.7) to 5.0, I have not been able to get OpenVPN back working. Please
forgive me for asking here at misc but I have spent two days Googling,
On Wed, Dec 14, 2011 at 06:28:55PM -0800, Johan Beisser wrote:
On Wed, Dec 14, 2011 at 5:54 PM, Erling Westenvik
erling.westen...@gmail.com wrote:
After upgrading (re-installing from scratch) my firewall from 4.6 (or
4.7) to 5.0, I have not been able to get OpenVPN back working. Please
Hi,
OpenBSD 4.1 as firewall crashed sometimes recently everyday ,and the
debug messages are like that:
uvm_fault ( 0xe33d7ea0,0x0,0,3) - e
kernel:page fault trap,code=0
stopped at pipe_create+ 0x16: Mov1 $0,0x10(%ebx)
ddb
anyone could tell me how to solve it .thanks in advance.
Upgrade to OpenBSD 5.0 before you dig too far. If you still have problems after
that, consider swapping hardware to see if the problems go away.
co...@tetrachina.com [co...@tetrachina.com] wrote:
Hi,
OpenBSD 4.1 as firewall crashed sometimes recently everyday ,and the
debug messages
SpecialePrestiti.
Nuove proposte per le famiglie e le aziende.
Visiti il sito
SpecialePrestiti.
per non ricevere ulteriori news clicchi qui
Yeah, net.inet.ip.forwarding=1, but thanks. I should perhaps have made
it more clear that my wired lan (192.168.3.0) works normally -- and my
wireless too when without OpenVPN. I'm feeling quite stupid here, being
more and more certain that the solution is very close. And very
simple...
On Wed,
Anexo : Planilha-Documento.doc (149,1 KB) Segue em anexo conforme
solicitado o relatorio e a
cotagco de pregos e produtos listados a seguir.
Tenha um bom dia!
28 matches
Mail list logo