On 11/17/2023 9:52 AM, Lewis Ingraham wrote:
Hello i am trying to configure OpenBSD as a firewall but I can't get it to
ping outside the firewall and subsequently unable to reach the internet
with devices behind the firewall. I tried changing my pf.conf to match the
FAQ (as best as i could) and
On 11/16/2023 9:39 AM, Manuel Kuklinski wrote:
Am Donnerstag 16 November 2023 um 8:53:10 -0700, schrieb John Brooks 2,1K:
I had a similar problem a few weeks back. Turned out to be a partial
failure of a network card. I could send and receive ICMP traffic, but
not TCP traffic. Replaced
On 11/16/2023 7:29 AM, Manuel Kuklinski wrote:
Hi misc,
I quickly chatted on #openbsd over at libera and tried different
solutions but none of them worked; my problem is as follows:
Until yesterday my WiFi on an iPhone 7 (iOS 15.8) was working
flawlessly; the IPv4s are statically assigned by
that was the entire point of my original post, they
strip out their queue id from their acknowledgment
for security reasons, and then accept all mail
including bogus recipients.
I was curious if this practice is very widespread
or not.
--
John Brooks
j...@day-light.com
...
In our mail logs
)
Their response:
... my understanding of the firmname removed security policy
is not to acknowledge mistakes in email addresses as a best
practice defense against phishing and other types of email
delivered attacks.
Anybody run into this kind of logic before?
--
John Brooks
j...@day-light.com
package: tabled-1.0.5
tablec is the client to manipulate pf tables through tabled
--
John Brooks
[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED] On Behalf Of Duncan Patton a Campbell
...
Um, what's tablec? Can't find any refs to it.
Dhu
tablec allows me to add or remove pf table entries with
an unprivileged userland account. is there a method to
produce a listing of all addresses in a pf table with
an unprivileged userland account?
--
John Brooks
[EMAIL PROTECTED]
how about this:
uname -a
or this:
head -1 /etc/motd
--
John Brooks
[EMAIL PROTECTED]
...
Please look at the first line of the output of dmesg(8).
If the server has been up for a while, the circular buffer may have
been over-written.
Try:
head -1 /var/run/dmesg.boot
Haven't had any trouble with them. Am in the middle of a project
deploying 93 units as firewalls for a pizza chain using this exact
motherboard along with a 3 nic daughterboard in a travla C158 case.
--
John Brooks
[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED] [mailto
did you run postfix-enable when you installed postfix?
--
John Brooks
[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of
Juan Miscaro
Sent: Friday, June 01, 2007 8:21 AM
To: openbsd-misc
Subject: postfix mailq command mixup on OpenBSD
Are you referring to the recent IPV6 issue or another?
--
John Brooks
[EMAIL PROTECTED]
2007/4/3, [EMAIL PROTECTED] dmesg
gateway# dmesg
OpenBSD 3.5 (GENERIC) #1: Sat May 1 08:18:25 PDT 2004
Sorry for not being more helpfull, but why are you running a firewall
with at least one
Haven't heard of an AK45, but I'm told the Russians are real
proud of their AK-47.
--
John Brooks
[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of
Ioan Nemes
Sent: Tuesday, November 28, 2006 5:23 PM
To: misc@openbsd.org; [EMAIL
How about adding a third nic to both the openbsd and firewall,
give them their own private network addresses, then redirect
the ssh traffic from firewall to openbsd over this new network
forgive my poor attempts at modifying your drawing ;-)
--
John Brooks
[EMAIL PROTECTED]
...
Any help
edit /etc/ntpd.conf
uncomment the listen on * line, or better yet create a line
that has your internal ip address
listen on xxx.xxx.xxx.xxx
also make sure ntpd is activated in /etc/rc.conf
--
John Brooks
[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL
hosts contains (amongst others):
some.remote.com NNN.NNN.NN.NNN some
looks a little funny to me... might work better as
NNN.NNN.NN.NNNsome.remote.com some
or possibly
NNN.NNN.NN.NNNsome some.remote.com
otherwise it seems to disregard the entry in /etc/hosts
on OpenBSD?
--
John Brooks
[EMAIL PROTECTED]
I;ve got a machien that seems to getting atacked by what appears to be a
simplistic brute force attck. it's getting hit multiple ties a second
with bogus root login attempts, my guess is that they are
trying dictionary
atacks on the password for root.
Any sugestions as to how to
. Are there some
routing commands that would allow me to send traffic to
the ISP from box #2 using these new IP's?
Thanks,
--
John Brooks
[EMAIL PROTECTED]
On Tuesday, September 06, John Brooks wrote:
(209.145.160.141)
OBSD #1 -
\
Switch DSL Modem ISP(209.145.160.1)
/
OBSD #2 -
(207.246.198.220)
I was expecting that 207.246.198.217 would have been
On Tue, 6 Sep 2005 15:25:29 -0500, John Brooks wrote:
My office network has an adsl connection with a single static
ip as follows:
209.145.160.141/24 (gw 209.145.160.1)
I requested additional ip's from my provider and they gave me
8 addresses at:
207.246.198.216/29
Don't forget the basics...
is the floppy ribbon cable connected?
is the floppy ribbon cable known to be good?
are the connectors fully seated, try reseating them?
is the power connected to the drive?
is the drive connected after the cable twist?
is the drive known to be good?
--
John
Sounds like a bad nic. If you have a spare, you might try
swapping with it.
Also, what's the other machine and what is it running?
The NIC is fine, and yes I swapped it out early on as well as the cable
and the port on the switch. I've also tried a crossover cable. I've also
How about a nic from a different mfr? Using another good 'dc' nic
doesn't
rule out a basic hardware incompatibility related directly to that brand
of nic card coupled with your other hardware.
JB
.
Even though it worked fine with RH7.3 a three + year old OS ?
I've seen specific
that icmp can flow thru
--
John Brooks
[EMAIL PROTECTED]
..
pass in inet proto icmp all icmp-type $icmp_types keep state
^^
it might be prudent to run the disk manufacterers diagnostic utility to
validate the condition of the drive. that's something i always do before
installing on a used disk.
... snip
8 partitions:
#sizeoffset fstype [fsize bsize cpg]
a: 3774852963 4.2BSD 2048 16384
25 matches
Mail list logo
