Is it related to what is mentioned here and I should wait for updated snapshots?
http://marc.info/?l=openbsd-tech&m=139064668614680&w=2
$ sudo pkg_add minicom
Fatal error: Ustar
[ftp://ftp.eu.openbsd.org/pub/OpenBSD/snapshots/packages/amd64/quirks-1.109.tgz][+CONTENTS]:
Error while reading header
On 05/04/11 03:05, Stuart Henderson wrote:
On 2011-05-03, Markus Bergkvist wrote:
On 05/03/11 22:13, Stuart Henderson wrote:
vovka gmail.com> writes:
On Sat, Apr 30, 2011 at 18:08, Erik Mugele teuton.org> wrote:
The following patch against -current enables the Samsung Ga
On 05/03/11 22:13, Stuart Henderson wrote:
vovka gmail.com> writes:
On Sat, Apr 30, 2011 at 18:08, Erik Mugele teuton.org> wrote:
The following patch against -current enables the Samsung Galaxy S
Android device (Samsung Captivate with AT&T) to be be used for USB
tethering.
Erik, grea
On 11/28/10 14:12, Markus Bergkvist wrote:
I get the panic when unplugging either AC or bge0. The panic, trace and
ps are the same regardless of unplugging AC or bge0, but `mach ddbcpu 1`
fills the console with 'bge0: PHY read timed out' when unplugging bge0.
This is a HP 6730b, -curr
On 12/31/10 00:56, m c wrote:
Hello all.
First time posting here, so I apologize in advance if my question doesn't
belong on this list.
I've been using some Compaq Deskpro DPENS Pentium II machines as OpenBSD
firewalls since late 2.x to early 3.x. Recently I made the jump to 4.8 and all
seems t
2010 at 02:12:44PM +0100, Markus Bergkvist wrote:
I get the panic when unplugging either AC or bge0. The panic, trace
and ps are the same regardless of unplugging AC or bge0, but `mach
ddbcpu 1` fills the console with 'bge0: PHY read timed out' when
unplugging bge0.
This is a HP 67
I get the panic when unplugging either AC or bge0. The panic, trace and
ps are the same regardless of unplugging AC or bge0, but `mach ddbcpu 1`
fills the console with 'bge0: PHY read timed out' when unplugging bge0.
This is a HP 6730b, -current, clean install. Anyone who can help me?
Should I
On 11/18/10 17:45, Joy Puglisi wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I'm learning C and this is the program:
#include
main()
{
double nc;
for (nc = 0; gechar() != EOF; ++nc);
This doesn't compile. try getchar() and Ctrl-D does the job.
printf("%.0f\n", nc);
}
On 10/13/10 20:51, Joakim Anka wrote:
Hi,
I have not been able to figure out how to change password on my softraid
crypto disks running -current as of two days.
At boot I am doing bioctl -c C -l /dev/wd0k softraid0 and the crypto volume
shows up as sd0a.
I have tried all combinations of bioctl
Can smtpd do masquerading of outgoing email? Something like what is
described here
http://www.postfix.org/STANDARD_CONFIGURATION_README.html#fantasy
hostname doesn't seem to do the trick.
/Markus
On 04/30/10 14:47, Markus Bergkvist wrote:
Hi!
This looks same as problem on my hp 6930p. According to Jordan it's some
reference counting bug somewhere. This makes it boot...
Index: dsdt.c
===
RCS file: /cvs/src/sys/dev
On 04/30/10 16:39, J.C. Roberts wrote:
On Fri, 30 Apr 2010 14:47:35 +0200 Markus Bergkvist
wrote:
Looks like the same problem I have on my hp 6730b. The diff makes it
boot, but if I plug or unplug the ac I get the panic below and the
only way to leave ddb is hard reboot.
From ddb, does
On 01/24/10 02:00, Zoran IvaniD wrote:
> On Fri, Jan 22, 2010 at 02:04:23PM +0100, Jan Stary wrote:
>
>> correctly (?) recognizes the SpeedStep frequencies:
>>
>> cpu0: Enhanced SpeedStep 2528 MHz: speeds: 2534, 2533, 1600, 800 MHz
>>
>> The kernel without ACPI does not:
>>
>> cpu0: unk
status: active
inet6 fe80::20d:56ff:fedf:f9b0%trunk0 prefixlen 64 scopeid 0x6
inet 192.168.1.102 netmask 0xff00 broadcast 192.168.1.255
/Markus
Markus Bergkvist wrote:
Normally I have no problem with the ipw-interface (except the occasional
well-known firmware exception),
http://marc.info/?t=12587732083&r=1&w=2
nixlists wrote:
Hi.
My softraid mirror went into degraded mode (on -current). How to
rebuild? I am trying to follow the bioctl manual page, but I don't
seem to understand the command to throw at it - syntax errors. Is it
supported yet?
Thanks.
Normally I have no problem with the ipw-interface (except the occasional
well-known firmware exception), but when used in a trunk failover setup
it fails to get any network. I'm succesfully using trunk on my other
machines, this is the only one with ipw interface. Cluestick anyone?
Not sure wha
Theo de Raadt wrote:
I now have wd0-wd5, how do I get the additional devices wd4 and wd5 in
/dev/ ?
If you had this problem during the installer, it would have created the
nodes for you. You can do this by
cd /dev
sh MAKEDEV wd4 wd5
That makes the nodes you need.
Works great.
I have 6 IDE devices; 4 of them are connected to the primary and
secondary IDE channels and 2 of them are connected to the SATA ports
with IDE to SATA adapter. I assumed the two drives connected to the
SATA ports would show up as sd0 and sd1, instead the show up as wd0
resp wd1. Was I wrong in
Thanks. Worked like a charm.
/Markus
Marco Peereboom wrote:
since it is softraid you use the sd entry.
like bioctl -R /dev/sd3a sd2
On Sat, Nov 21, 2009 at 01:53:50AM +0100, Markus Bergkvist wrote:
Hi
I had to replace one of the drives in a softraid raid level 1 setup.
How do I kick off a
Hi
I had to replace one of the drives in a softraid raid level 1 setup.
How do I kick off a rebuild? This is apparently not the correct way, or
something else is broken here...
# bioctl -c 1 -l /dev/sd0a,/dev/sd1a softraid0
# bioctl -ih
softraid0
It was said in
http://marc.info/?l=openbsd-misc&m=125139976027774&w=2
that stacking RAID sets is not a good idea. I.e. this
# bioctl -ih softraid0
Volume Status Size Device
softraid0 0 Online 447G sd2 RAID0
0 Online 149G 0:0.0 noencl
1
* To Unmount, do this:
- # unmount /home
+ # umount /home
# vnconfig -v -u svnd0
/Markus
Brad Tilley wrote:
I wrote some notes on how I normally encrypt /home on OpenBSD laptops.
I was hoping misc could read it and bash it around some. I'd like to
know if I'm doing something wrong
jean-francois wrote:
Reason is I settled sort of a nas server which means it is actually
deserving files to the network.
For it is my personal server, there are from time to time couple of days
even couple of weeks where there's no reason to read those datas.
It is working 24/7 and needs to be
Hi
I get 'WARNING: mclpools limit reached; increase kern.maxclusters'
whenever I transfer a large file with sftp or bittorrent on wpi
interface. With bittorent and many peers I get the error after a couple
of minutes, with sftp I get the error after transferring 600+MB or so.
After receiving
Hi
I get kernel freeze randomly on Compaq 6710b with -CURRENT synced today.
It is best reproduced by keeping the system busy, such as building
userland, but there are no guarantees.
I've been running memtester and also memory and hd test in bios, no
errors were found.
I get no ddb or any o
http://article.gmane.org/gmane.os.openbsd.ports/33085
Aaron W. Hsu wrote:
Hey All,
I wanted to check with any users here that are using the opera web
browser. Can you please mention what Window Manager you use? I
am trying to understand why Opera is unstable for me, but not for
other people.
Markus Bergkvist wrote:
I've had the "acpitz0: _AL1[0] not a object ref" problem with my HP
Compaq 6710B too, with -current it seems to be fixed
/Markus
Not entirely true. Yesterday I got
acpitz2: TZ5_: failed to read _TMP
acpitz2: TZ5_: failed to read temp
once every minu
I've had the "acpitz0: _AL1[0] not a object ref" problem with my HP
Compaq 6710B too, with -current it seems to be fixed
/Markus
OpenBSD 4.4-current (GENERIC.MP) #29: Sun Sep 14 18:59:41 CEST 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2125410304 (2026MB)
av
ed at it was middle of august, don't know if there has
been any changes since. Perhaps it is time to have another look at it.
/Markus
Alexey Suslikov wrote:
Markus Bergkvist wrote:
2.00 GHz cpu with unknown speedstep is reported to have 2200 MHz as
highest speed. Feature or defect? :-) Does
2.00 GHz cpu with unknown speedstep is reported to have 2200 MHz as
highest speed. Feature or defect? :-) Does this deserve a PR posting or
is it ongoing work?
$ apm -L && sysctl hw.cpuspeed
hw.cpuspeed=1200
$ apm -H && sysctl hw.cpuspeed
hw.cpuspeed=2200
OpenBSD 4.4-current (GENERIC) #1574:
00, 600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82855PM Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82855PM AGP" rev 0x03
/Markus
Markus Bergkvist wrote:
My Dell Latitude D600 seems to be reporting wrong cpu-sp
My Dell Latitude D600 seems to be reporting wrong cpu-speed. The dmesg
says
acpicpu0 at acpi0: C3, C3, C2, C1, FVS, 1600, 1600, 1400, 1200, 1000,
800, 600 M
Hz
which I believe to be correct. But this is what I get from sysctl
hw.cpuspeed=600
hw.setperf=100
Changing hw.setperf makes no differenc
Hi,
It seems that my RAID1 softraid device gets listed as RAID0 and vice
versa with bioctl, or am I misinterpreting the output?
$ sudo bioctl -ih softraid0
Volume Status Size Device
softraid0 0 Online 10.0G sd3 RAID1
0 Online 10.0G 0:0.0 noe
I have defined SMART_HOST in openbsd-localhost.mc and sendmail is now
trying to relay to my ISP:s SMTP server, but I can't make it masquerade
the mail properly. I have also added
FEATURE(masquerade_envelope)dnl
FEATURE(genericstable, `hash -o /etc/mail/genericstable')dnl
to openbsd-localhost.m
0 Online 10781184 2:0.0 noencl
1 Online 10781184 2:1.0 noencl
/Markus
Marco Peereboom wrote:
bioctl -c 1 C noauto -l /dev/wd1a,/dev/wd2a,/dev/wd3a softraid0
On Tue, Apr 29, 2008 at 11:37:39PM +0200, Markus Bergkvist wrote:
Hi,
How can I drop a softraid(4) volume create
Hi,
How can I drop a softraid(4) volume created with e.g.
# bioctl -c 1 -l /dev/wd1a,/dev/wd2a,/dev/wd3a softraid0
scsibus0 at softraid0: 1 targets
sd0 at scsibus0 targ 0 lun 0: SCSI2
sd0: 1MB, 0 cyl, 255 head, 63 sec, 512 bytes/sec, 3714 sec total
/Markus
Thanks to all for your replies.
relayd seems to be what I'm looking for.
BR,
Markus
Stuart Henderson wrote:
On 2008-04-28, bofh <[EMAIL PROTECTED]> wrote:
Is it possible to have PF redirecting traffic based on sub-domains? I.e. I
want traffic to a.mydomain.nu to be redirected to machine 'a and
Hi,
Is it possible to have PF redirecting traffic based on sub-domains? I.e.
I want traffic to a.mydomain.nu to be redirected to machine 'a and
traffic to b.mydomain.nu to be redirected to machine 'b'.'
/Markus
What I've heard is that the site will be back up with new owners asap.
/Markus
Fredrik Carlsson wrote:
Edd Barrett gmail.com> writes:
hey,
what happened to ports.openbsd.nu?.
The owner forgot to renew it and I can't reach him, so the site has moved to
http://openports.se
Regards
Fredrik
Hi,
I have a USB serial adapter that is recognized as
uftdi0 at uhub1
port 2 "FTDI FT232R USB UART" rev 2.00/6.00 addr 2
ucom0 at uftdi0 portno 1
I have a "Point View LR"
(http://www.pointsix.com/cgi-bin/PointSix.cgi?pointview) connected to it
but I can't get any data from it.
This is what
ch
I believed should disappear when asbtm was found.
Thanks all for your help.
/Markus
Marco Peereboom wrote:
apm overrides acpi. If you want to run acpi disable apm at boot time.
b bsd -c
disable apm
quit
On Mon, Jan 07, 2008 at 09:13:27AM +0100, Markus Bergkvist wrote:
Markus Bergkvist wrote:
.
Setting the delay to 500 and both of the devices are found.
/Markus
Pierre Riteau wrote:
On Jan 7, 2008 9:13 AM, Markus Bergkvist <[EMAIL PROTECTED]> wrote:
Markus Bergkvist wrote:
Pierre Riteau wrote:
I noticed that increasing the delay in sys/dev/pci/nviic.c from 100
to 500 fixe
Markus Bergkvist wrote:
Pierre Riteau wrote:
I noticed that increasing the delay in sys/dev/pci/nviic.c from 100
to 500 fixes this problem but I haven't took the time to file a bug
report yet.
Seems to work here too.
Just increasing the delay doesn't work here any longer on a recen
apropos on 'glxpcib' gives
http://www.openbsd.org/cgi-bin/man.cgi?query=glxpcib&sektion=0&manpath=OpenBSD+Current&arch=i386&apropos=1&format=html
which contains a link to 'glxpcib (4/i386)' which is invalid
http://www.openbsd.org/cgi-bin/man.cgi?query=glxpcib&sektion=4%2fi386&apropos=0&manpath=Ope
tor
(Hi3G Access AB) so I can test the modem? I have no real personal
interest in this modem right now, hence won't take the time to figure it
out.
/Markus
Markus Bergkvist wrote:
I'll test it as soon as I get a chance, currently my laptop gets a page
fault and enters ddb during boo
I'll test it as soon as I get a chance, currently my laptop gets a page
fault and enters ddb during boot :-/
Also, I could not apply your diff on -current. Below is an updated diff.
BR,
Markus
--- sys/dev/usb/umsm.c.orig Wed Dec 12 22:21:44 2007
+++ sys/dev/usb/umsm.c Wed Dec 12 22:14:21 2
I borrowed a HUAWEI modem just to see how it is recognized.
With umass enabled it is recognized as a CD. Disabling umass and it is
found as ugen.
From this thread http://marc.info/?l=openbsd-misc&m=118468178731619&w=2
I figured it should have been recognized as ubsa. Any suggestions?
dmesg wit
Yes, you are right. I was told it was the same (as in manufacturer)
cards but it wasn't. The size differed in ~15MB.
/Markus
Unix Fan wrote:
If you own any other ~1G SD cards, perhaps you should try using one of them?...
for reasons unknown, not all cards are created equal. :(
-Nix Fan.
What might be required to be able to use a labjack in OpenBSD? The U3
device is recognized as USB generic device
ugen0 at uhub1
port 1 "LabJack LabJack U3" rev 1.10/0.00 addr 2
Would it be sufficient to port the available linux library
(http://www.labjack.com/labjack_u3_downloads.php) to speak
the detected geometry was not big enough to hold the imagefile. I guess
I'll have to have a chat with the guy who made the imagefile to see if
the image could be shrinked.
Thanks for the advice.
Btw, what limitations are there on the block size, and what drawbacks
should I expect with a too la
Hi,
I have an image file of a Linux bootable CF-card. The image is created
with 'dd if=/dev/sdc of=imagefile.bin' on a machine running Linux. When
I try to write that image to another CF-card with 'dd if=imagefile.bin
of=/dev/sd1c' from OpenBSD I get the following error after approximately
2 h
I see similar problem with my ral(4), reported in PR 5420
http://cvs.openbsd.org/cgi-bin/query-pr-wrapper?full=yes&numbers=5420
See if the diff at the end of the report do you any good.
also, there
http://marc.info/?l=openbsd-tech&w=2&r=1&s=patch+if_trunk.h+for+ath+and+em&q=b
michael hamerski w
Excellent, just what I was looking for. Thanks.
/Markus
Paul de Weerd wrote:
On Tue, Oct 30, 2007 at 08:36:41AM +0100, Markus Bergkvist wrote:
| Currently I have 'outputs.master=127' in /etc/mixerctl.conf. I want this
| value to be updated to the current value in mixerctl whenever
Currently I have 'outputs.master=127' in /etc/mixerctl.conf. I want this
value to be updated to the current value in mixerctl whenever the system
is rebooted. Any suggestion on how this could be accomplished?
/Markus
Pierre Riteau wrote:
On Thu, Oct 18, 2007 at 04:35:38PM +0200, Markus Bergkvist wrote:
Even though bios0 reports "ASUS A7N8X Deluxe ACPI BIOS" during boot, I
see no acpi0 in the dmesg, w/o acpi enabled. Unsupported, or am I just not
supposed to see a acpi0 device?
disable apm0 if y
Pierre Riteau wrote:
disable apm0 if you want to see use acpi.
Thanks, that helped.
I have the same motherboard and I noticed that devices on the iic bus
are not always detected. There is no causal link with acpi, you just
happened to see that behavior after enabling acpi but it would have
Hi
I can't get the file browser in gnome to update automatically when a file
is e.g. created or removed if I start famd with
sgi_fam/1-2 stream rpc/tcp waitroot/usr/local/sbin/famd famd
in /etc/inetd.conf
But if I start famd with
if [ -x /usr/local/sbin/famd ]; then
/u
Lars NoodC)n wrote:
Tips on documentation, HOWTOs or notes of any kind would be great since
the search engines are rather useless for technical documentation. Some
pages have even disappeared, others are quite old.
http://www.openbsd.org/faq/faq14.html#RAID
http://os.newsforge.com/os/06/03/08/
http://geektechnique.org/projectlab/84/openbsd-encrypted-fileserver-howto
Reply #13 and #16 on this howto mentions a way to encrypt the complete disc.
Seems to be an ugly way of doing it though.
/Markus
Richard Storm wrote:
This is crappy howto. *encryption* there are as much as creating
unse
Darrin Chandler wrote:
Here's what *I* think snapshots are NOT...
- Mini -release, with all the goodies you've come to expect from
*real* releases.
Which is kind of confirmed by the FAQ
http://www.openbsd.org/faq/faq5.html#Flavors
"There is no promise that the snapshots are completely fu
I don't know if it is related, but you could perhaps try the patch at the
end of this report
http://cvs.openbsd.org/cgi-bin/query-pr-wrapper?full=yes&numbers=5420
/Markus
Josh Grosse wrote:
I have an i386 laptop with two NICs: xl(4) and an(4).
For me, trunk(4) does not seem to be able to se
Pierre Lamy wrote:
UTC aka Coordinated Universal Time, is the "right now is right now for
all of us" time, and is coordinated among several entities, irregardless
of the timezone the parties are in. GMT is a timezone with an offset of
zero. All timezones are differentials off of UTC; you couldn
0400, Nick ! wrote:
On 4/10/07, Markus Bergkvist <[EMAIL PROTECTED]> wrote:
Hi,
'date -u' on a 4.0 -stable will give something like
Tue Apr 10 22:03:24 GMT 2007
but shouldn't it be
Tue Apr 10 22:03:24 UTC 2007
UTC = GMT for all that we care about.
Hi,
'date -u' on a 4.0 -stable will give something like
Tue Apr 10 22:03:24 GMT 2007
but shouldn't it be
Tue Apr 10 22:03:24 UTC 2007
Cheers,
Markus
http://flirble.disruptiveproactivity.com/rss/
/Markus
Siju George wrote:
Hi,
The latest entry in
http://www.vuxml.org/openbsd/
is
2006-01-10 clamav -- heap overflow in the UPX code
more than a year now?
is there any other place to get updated RSS feed for the same thing?
Thankyou so
See release notes on Dnsmasq 2.35
http://freshmeat.net/projects/dnsmasq/?branch_id=1991&release_id=239661
"OpenBSD-4.0 is due for release very soon and no version of dnsmasq
prior to 2.35 will do DHCP on OpenBSD-4.0."
/Markus
Manuel Ravasio wrote:
Hello all.
I'm trying to set up a firewall/w
Yeah, I know. The patch from Vatchenko made my iAudio U2 work :-)
# disklabel sd0
disklabel: ioctl DIOCGDINFO: Input/output error
# fdisk sd0
fdisk: DIOCGDINFO: Input/output error
fdisk: sysctl(machdep.bios.diskinfo): Device not configured
fdisk: Can't get disk geometry, please use [-chs] to spe
Tjenare,
So, I received this 256MB USB flash disk today just to find out that I
can't use it in my favourite OS. I figure I could send it to one of the
developers, if someone is interested, but before going down that road
perhaps there is someone at @misc that have a suggestion on how I can
g
;w=2)
since when I do get a connection, the range is acceptable.
/Markus
Markus Bergkvist wrote:
I have not yet been able to get a debug print from client ral when it is
failing, is there a way to set that in hostname.if? If the device is not
failing during boot, it is hard to get it to fail.
Some new findings. Hopefully these means something to someone because I
don't really know where to go from here.
I noticed that I can't reproduce the 'device timeout' if I turn off the
device at the AP. Could the AP be responding with something fishy?
I also found out that if I change the ral-
lease notes on Dnsmasq 2.35
http://freshmeat.net/projects/dnsmasq/?branch_id=1991&release_id=239661
/Markus
[EMAIL PROTECTED] wrote:
- Original Message -----
From: Markus Bergkvist <[EMAIL PROTECTED]>
Date: Friday, December 15, 2006 7:11 pm
Subject: Re: dhcpd question
To: misc
I noticed no-one has suggested dnsmasq, any reason for that? Just curious.
/Markus
Craig Skinner wrote:
On Fri, Dec 15, 2006 at 12:04:15AM +0530, Siju George wrote:
long time back I did this on my firewalls
http://cr.yp.to/djbdns/install.html
http://cr.yp.to/djbdns/run-cache-x.html
Don't
at would indicate that the error is generated internally. I wouldn't
bet my life on an OS or hardware issue here.
Bill
On Tue, 2006-12-05 at 23:11 +0100, Markus Bergkvist wrote:
I have a RT2600 also on my AP so I guess I have to get my hands on a
working out-of-the-box AP to verify that it is no hard
I have a RT2600 also on my AP so I guess I have to get my hands on a
working out-of-the-box AP to verify that it is no hardware problem.
/Markus
Bill Maas wrote:
On 12/4/06, Markus Bergkvist <[EMAIL PROTECTED]> wrote:
Also, the connection light and the transmission light is alw
Ok, thanks. Good to know, then I don't have to think about that anymore.
/Markus
Sepherosa Ziehau wrote:
On 12/4/06, Markus Bergkvist <[EMAIL PROTECTED]> wrote:
Also, the connection light and the transmission light is always on,
regardsless if it is connected to the network
Also, the connection light and the transmission light is always on,
regardsless if it is connected to the network or sending/receiving or
not. Only when I take the network interface down the lights go out. If
that means anything to anyone.
/Markus
For some time now I've been trying to get my SMC wireless cardbus[1]
with Ralink RT2600 chipset[2] to work on my laptop running OpenBSD 4.0
-stable but I keep getting 'ral0: device timeout'.
If I bring the device down and then up (sometimes I have to do this
several times) I finally get it to wo
dhcp NONE NONE NONE trunkproto failover trunkport fxp0 trunkport ral0
[OpenBSD AP]
22:49~$ cat /etc/bridgename.bridge0
add fxp0
add ral0
timeout 10
up
/Markus
Reyk Floeter wrote:
hi,
On Thu, Nov 09, 2006 at 01:44:26AM +0100, Markus Bergkvist wrote:
First, I thought it was because fxp0 and ral0 on
Reyk Floeter wrote:
> On Wed, Nov 08, 2006 at 01:01:39AM +0100, Markus Bergkvist wrote:
>
> don't do dhclient ral0, do a dhclient trunk0 after setting up trunk.
>
> # ifconfig fxp0 up
> # ifconfig ral0 nwid himmet_wlan up
> # ifconfig trunk0 trunkproto failover trunkp
ping 192.168.0.1 but ping
192.168.1.1 give same error as before. However, the tcp_dump at the host
now got interesting (attached file tcp_dump_host_2). Unfortunately, I'm
not sure what to do with it :/
/Markus
Reyk Floeter wrote:
> On Tue, Nov 07, 2006 at 11:50:16PM +0100, Markus Be
Simon Westphahl wrote:
Your interfaces need to be marked up and completely unconfigured.
In your case:
#cat /etc/hostname.fxp0
up
#cat /etc/hostname.ral0
up
#cat /etc/hostname.trunk0
inet 192.168.0.35 255.255.255.0 NONE trunkproto failover trunkport fxp0
trunkport ral0
Ok, some progress now
Stuart Henderson wrote:
> kill the old routing table entries (or reboot).
>
>
Ok, did a
# route flush
but that did not help. Not sure how to interpret the output from the
utililty but it seems to be ok, or?
The output is attached, the format got messed up when I copy-pasted to
the mail.
/Mar
Reyk Floeter wrote:
> the trunk will use the mac address of it's primary trunkport, which is
> fxp0 in your case. as soon as you add ral0 to the trunk it will also
> use the trunk mac address (00:02:a5:b8:71:b5 from fxp0) for ethernet
> and 802.11 traffic. this should trigger a new authentication
I try to set up a trunk failover from my fxp0 to my ral0. After the
trunk is created, trunkport is added and address is assigned I have no
network connection any longer and I get some strange replies from ping:
$ping 192.168.0.1
PING 192.168.0.1 (192.168.0.1): 56 data bytes
ping: sendto: Device
84 matches
Mail list logo
