misc@openbsd.org
Subject: Re:
requesting help working around boot failures with supermicro atom board
Synopsis: if sensors show missing data then reset the BMC unit before
rebooting the system to prevent unable to boot long beep issue.
I found a
reliably reproducible workaround for this problem reta
Synopsis: if sensors show missing data then reset the BMC unit before
rebooting the system to prevent unable to boot long beep issue.
I found a reliably reproducible workaround for this problem retaining
control continuity without the need to trip the mains breaker. This
entirely prevents the lon
L and it seemed reasonable.
>
> -ml
>
> > -- Forwarded message --
> > From: Dewey Hylton
> > To: misc@openbsd.org
> > Cc:
> > Date: Tue, 15 Sep 2015 19:19:10 +0000 (UTC)
> > Subject: Re: requesting help working around boot failures with supe
ate: Tue, 15 Sep 2015 19:19:10 +0000 (UTC)
> Subject: Re: requesting help working around boot failures with supermicro
> atom board
> Dewey Hylton gmail.com> writes:
>
> >
> > Mark Kettenis xs4all.nl> writes:
>
> > > Oh that is interesting. Can you try disablin
ng to acpi?
-- Forwarded message --
From: Dewey Hylton
To: misc@openbsd.org
Cc:
Date: Tue, 15 Sep 2015 19:19:10 + (UTC)
Subject: Re: requesting help working around boot failures with supermicro
atom board
Dewey Hylton gmail.com> writes:
>
> Mark Kettenis xs4
Tue, 6 Oct 2015 21:41:15 -0700 Mike Larkin
> I had thought this was acpi related earlier (before we realized that disabling
> lm* fixes it). So I have no news here, as I don't think the solution is going
> to be found in the AML.
Thanks for the update and pointer in the right direction (regarding
On Mon, Oct 05, 2015 at 01:18:53PM -0400, dewey.hyl...@gmail.com wrote:
> unfortunately, not on my end. i have hopes that mike larkin may find something
> when he gets a chance to look, but i am past the limit of my capabilities and
> supermicro support has discontinued responding to me. their last
On Tue, Sep 15, 2015 at 02:45:02AM +, Dewey Hylton wrote:
> Mark Kettenis xs4all.nl> writes:
>
> >
> > > # sysctl -a|grep 'sensors.*temp'
> > > hw.sensors.cpu0.temp0=30.00 degC
> > > hw.sensors.lm1.temp0=0.00 degC
> > > hw.sensors.lm1.temp1=14.00 degC
> > > hw.sensors.lm1.temp2=14.00 degC
>
On Mon, Oct 5, 2015 at 1:18 PM, dewey.hyl...@gmail.com
wrote:
> but their non-support of this brand-new motherboard
When the other OS's work fine is does seem to point to an OpenBSD
issue, but that's not always a reliable conclusion to arrive at.
Either way it would be nice to see it resolved.
T
unfortunately, not on my end. i have hopes that mike larkin may find something
when he gets a chance to look, but i am past the limit of my capabilities and
supermicro support has discontinued responding to me. their last suggestion was
to switch to linux or windows, and their last message was of t
Any progress on this issue?
On Thu, Sep 17, 2015 at 1:26 PM, Mike Larkin wrote:
> On Thu, Sep 17, 2015 at 12:40:12PM +, Dewey Hylton wrote:
>> Dewey Hylton gmail.com> writes:
>>
>> >
>> > Mike Larkin azathoth.net> writes:
>> >
>> > >
>> > > On Tue, Sep 15, 2015 at 07:16:40PM +, Dewey Hy
On Thu, Sep 17, 2015 at 12:40:12PM +, Dewey Hylton wrote:
> Dewey Hylton gmail.com> writes:
>
> >
> > Mike Larkin azathoth.net> writes:
> >
> > >
> > > On Tue, Sep 15, 2015 at 07:16:40PM +, Dewey Hylton wrote:
> > > > Dewey Hylton gmail.com> writes:
> > > >
> > > > >
> > > > > Mike
Dewey Hylton gmail.com> writes:
>
> Mike Larkin azathoth.net> writes:
>
> >
> > On Tue, Sep 15, 2015 at 07:16:40PM +, Dewey Hylton wrote:
> > > Dewey Hylton gmail.com> writes:
> > >
> > > >
> > > > Mike Larkin azathoth.net> writes:
> > >
> > > > > acpidump please.
> motherboard: sup
Mike Larkin azathoth.net> writes:
>
> On Tue, Sep 15, 2015 at 07:16:40PM +, Dewey Hylton wrote:
> > Dewey Hylton gmail.com> writes:
> >
> > >
> > > Mike Larkin azathoth.net> writes:
> >
> > > > acpidump please.
> > >
> > > my pleasure:
> > >
> > > [demime removed a uuencoded section n
On Tue, Sep 15, 2015 at 07:16:40PM +, Dewey Hylton wrote:
> Dewey Hylton gmail.com> writes:
>
> >
> > Mike Larkin azathoth.net> writes:
>
> > > acpidump please.
> >
> > my pleasure:
> >
> > [demime removed a uuencoded section named
> supermicro-X7SPE-HF-D525-acpidump.tgz which was 276 li
Dewey Hylton gmail.com> writes:
>
> Mark Kettenis xs4all.nl> writes:
> > Oh that is interesting. Can you try disabling the lm(4) driver in
> > your kernel? You can do:
> >
> > # config -ef /bsd
> > ...
> > ukc> disable lm
> > 254 lm0 disabled
> > 255 lm* disabled
> > 256 lm* disabled
> > uk
Dewey Hylton gmail.com> writes:
>
> Mike Larkin azathoth.net> writes:
> > acpidump please.
>
> my pleasure:
>
> [demime removed a uuencoded section named
supermicro-X7SPE-HF-D525-acpidump.tgz which was 276 lines]
>
>
alright ... so this didn't work. i'll try to make the acpidump available
Mark Kettenis xs4all.nl> writes:
>
> > # sysctl -a|grep 'sensors.*temp'
> > hw.sensors.cpu0.temp0=30.00 degC
> > hw.sensors.lm1.temp0=0.00 degC
> > hw.sensors.lm1.temp1=14.00 degC
> > hw.sensors.lm1.temp2=14.00 degC
> > # reboot
> >
> > BEEEP!
>
> Oh that is interesting. Can you t
Dewey Hylton gmail.com> writes:
> # sysctl -a|grep 'sensors.*temp'
> hw.sensors.cpu0.temp0=31.00 degC
> hw.sensors.lm1.temp0=48.00 degC
> hw.sensors.lm1.temp1=52.50 degC
> hw.sensors.lm1.temp2=36.00 degC
> # reboot
>
> and meet with success ... if i wait just a few minutes (2) i end up with th
> # sysctl -a|grep 'sensors.*temp'
> hw.sensors.cpu0.temp0=30.00 degC
> hw.sensors.lm1.temp0=0.00 degC
> hw.sensors.lm1.temp1=14.00 degC
> hw.sensors.lm1.temp2=14.00 degC
> # reboot
>
> BEEEP!
Oh that is interesting. Can you try disabling the lm(4) driver in
your kernel? You can do:
Kurt Mosiejczuk se.rit.edu> writes:
>
> On Mon, Sep 14, 2015 at 05:15:01PM +, Dewey Hylton wrote:
>
> > > I've had this issue with the same systems. Never guessed it would
> > > be OpenBSD specific. What I've found to make it stop happening is
> > > pulling the board out and redoing the t
Mike Larkin azathoth.net> writes:
>
> On Fri, Sep 11, 2015 at 06:38:23PM -0400, dewey.hylton gmail.com wrote:
> > hi all. i???m having difficulty with this board:
> >
> > Supermicro X7SPE-HD-D525 rev1
> >
> > i have several similar systems, each running an older version of OpenBSD
for a few y
On Fri, Sep 11, 2015 at 06:38:23PM -0400, dewey.hyl...@gmail.com wrote:
> hi all. i???m having difficulty with this board:
>
> Supermicro X7SPE-HD-D525 rev1
>
> i have several similar systems, each running an older version of OpenBSD for
> a few years without incident. except this one ???
>
> r
On Mon, Sep 14, 2015 at 05:15:01PM +, Dewey Hylton wrote:
> > I've had this issue with the same systems. Never guessed it would
> > be OpenBSD specific. What I've found to make it stop happening is
> > pulling the board out and redoing the thermal paste for the CPU
> > heatsink. I had found
Kurt Mosiejczuk [kurt-open...@se.rit.edu] wrote:
>
> Hearing that Linux doesn't trip it, I'm wondering if it's an ACPI difference
> between OpenBSD and Linux. Perhaps OpenBSD runs the CPU hotter before
> turning it back over to the BIOS on reboot?
>
OpenBSD 5.8-current enters deeper C states th
Patrick Dohman comcast.net> writes:
>
> Any thermal settings in the bios? CPU performance, Fan Speed etc..
>
> Does the fan idle correctly? Often intel chipsets will throttle the fan
during a bios test.
>
> Perhaps ACPI is not routing an interrupt??
Not much is available to be tweaked in this
Kurt Mosiejczuk se.rit.edu> writes:
>
> On Sat, Sep 12, 2015 at 03:51:36PM +, Dewey Hylton wrote:
>
> > the only real differences i see are:
> > 1) bios revision
> > 2) secondary disk attached to different sata port
> > 3) sensors only present on working machine
>
> I've had this issue wit
On Sat, Sep 12, 2015 at 03:51:36PM +, Dewey Hylton wrote:
> the only real differences i see are:
> 1) bios revision
> 2) secondary disk attached to different sata port
> 3) sensors only present on working machine
I've had this issue with the same systems. Never guessed it would be OpenBSD
sp
Sonic gmail.com> writes:
> On Sun, Sep 13, 2015 at 10:15 AM, Sonic gmail.com> wrote:
> > I also have this issue with OpenBSD on this box. Every time I reboot
> > after updating a snapshot I need to power cycle to eliminate the long
> > beep error. For some reason I kept thinking it was due to my
Any thermal settings in the bios? CPU performance, Fan Speed etc..
Does the fan idle correctly? Often intel chipsets will throttle the fan during
a bios test.
Perhaps ACPI is not routing an interrupt??
Regards
Patrick
> On Sep 11, 2015, at 5:38 PM, dewey.hyl...@gmail.com wrote:
>
> hi all. i
My mistake - the board I have trouble with is the X7SPE-HF-D525 and
not the X7SPA-HF-D525.
On Sun, Sep 13, 2015 at 11:23 AM, Sonic wrote:
> On Sun, Sep 13, 2015 at 10:15 AM, Sonic wrote:
>> I also have this issue with OpenBSD on this box. Every time I reboot
>> after updating a snapshot I need t
On Sun, Sep 13, 2015 at 10:15 AM, Sonic wrote:
> I also have this issue with OpenBSD on this box. Every time I reboot
> after updating a snapshot I need to power cycle to eliminate the long
> beep error. For some reason I kept thinking it was due to my replacing
> the stock PSU with a picoPSU for
Never had any reboot issues on two X7SPA-HF-D525 (Bios R1.2b) and i'm
updating/rebooting pretty often the last few weeks.
On Sun, Sep 13, 2015 at 10:15:31AM -0400, Sonic wrote:
> On Sat, Sep 12, 2015 at 11:02 PM, wrote:
> > X7SPA-HF-D525
>
> I also have this issue with OpenBSD on this box. Ever
On Sat, Sep 12, 2015 at 11:02 PM, wrote:
> X7SPA-HF-D525
I also have this issue with OpenBSD on this box. Every time I reboot
after updating a snapshot I need to power cycle to eliminate the long
beep error. For some reason I kept thinking it was due to my replacing
the stock PSU with a picoPSU
> i have indeed disabled quick/quiet boot options to no avail. i've also tried
> failsafe mode, ide vs ahci, acpi v1/2/3. the issue does not present with
> linux, which makes me wonder whether the openbsd kernel is somehow making
> some kind of hardware setting change that is not cleared on reboot.
wrant.com> writes:
>
> > Whether they are identical or not, showing us a dmesg diff with a known
> > working release booted from both a working and the non-working system
> > could also be helpful.
>
> Another Supermicro X7SPA-HF-D525 board (same chipset/CPU combination)
> has been having the
Richard Laysell xiphosura.co.uk> writes:
>
> On Fri, 11 Sep 2015 18:38:23 -0400 (EDT)
> "dewey.hylton gmail.com" gmail.com> wrote:
>
> > hi all. i’m having difficulty with this board:
> >
> > Supermicro X7SPE-HD-D525 rev1
> >
> > i have several similar systems, each running an older version
> Whether they are identical or not, showing us a dmesg diff with a known
> working release booted from both a working and the non-working system
> could also be helpful.
Another Supermicro X7SPA-HF-D525 board (same chipset/CPU combination)
has been having the same issue since early 2011 (the enti
On Fri, 11 Sep 2015 18:38:23 -0400 (EDT)
"dewey.hyl...@gmail.com" wrote:
> hi all. i’m having difficulty with this board:
>
> Supermicro X7SPE-HD-D525 rev1
>
> i have several similar systems, each running an older version of
> OpenBSD for a few years without incident. except this one …
>
Do
Dewey Hylton gmail.com> writes:
> > Whether they are identical or not, showing us a dmesg diff with a known
> > working release booted from both a working and the non-working system
> > could also be helpful.
>
> i'll post the diff below.
the only real differences i see are:
1) bios revision
2)
John E.P. Hynes hytronix.com> writes:
>
> Try booting the SP kernel and see if that works. If it does, you might
> be running into a variant of an issie I've had on my SuperMicro boxen...
>
> -John
john, i tried this (5.4 bsd.sp) and i'm seeing the same result. it didn't
occur to me to try th
Benny Lofgren lofgren.biz> writes:
>
> Hi Dewey,
>
> On 2015-09-12 00:38, dewey.hylton gmail.com wrote:
> > hi all. i’m having difficulty with this board:
>
> I noticed your mail somehow got posted twice, but I'm commenting on the
> first incarnation of it because the second had some characte
Try booting the SP kernel and see if that works. If it does, you might
be running into a variant of an issie I've had on my SuperMicro boxen...
-John
On 09/11/2015 06:38 PM, dewey.hyl...@gmail.com wrote:
> hi all. i’m having difficulty with this board:
>
> Supermicro X7SPE-HD-D525 rev1
>
> i h
Hi Dewey,
On 2015-09-12 00:38, dewey.hyl...@gmail.com wrote:
> hi all. i’m having difficulty with this board:
I noticed your mail somehow got posted twice, but I'm commenting on the
first incarnation of it because the second had some characters like '\''
mangled (UTF-8 copy/paste issue I presume)
hi all. i’m having difficulty with this board:
Supermicro X7SPE-HD-D525 rev1
i have several similar systems, each running an older version of OpenBSD for a
few years without incident. except this one …
running OpenBSD 5.7 i386, from cold start it boots just fine and runs until
rebooted. once r
hi all. iâm having difficulty with OpenBSD on this board:
Supermicro X7SPE-HD-D525 rev1
i have several similar systems, each running an older version of OpenBSD
for a few years without incident. except this one â¦
running OpenBSD 5.7 i386 as well as latest amd64 snapshot, from cold start
it b
46 matches
Mail list logo
