On Wed, Oct 10, 2007 at 10:28:22PM -0300, Jo?o Salvatti wrote:
Hi all,
I wrote a kernel module for my 4.1 OpenBSD kernel. It compiles
normally, but when I try to load it, the modload says:
: undefined reference to `read'
But the read syscall header is declared within my module. Has
Douglas A. Tutty wrote:
Basically, your problem is that you need a smarter bootloader.
http://linux.simple.be/tools/sbm ( maybe a usb floppy/pen drive)
Hi there,
Is there any chance that OpenBSD gets Locale support?
I've seen some hacks using Linux-compatablity support, but it would be a lot
nicer if it would be available in the standard install.
Is there anybody out there that can fix this?
I would like to have OpenBSD run my little secure
Hello,
i want to include the functionality of our old Linksys BEFVP41 into
our new OpenBSD Router.
First step: PSK
One line like
ike passive esp tunnel from any to localnet main ... quick ... psk foobar
in ipsec.conf works.
If I put in a second line with another PSK, only the second one works.
On 10/11/07, Edwards, David (JTS) [EMAIL PROTECTED] wrote:
Hi again.
Just a wrap up to this thread.
-
Disk naming seems to be consistent after you first plug the device in.
So:
The first disk plugged into a port (say addr 2) gets sd1 (if your SATA
disk is sd0)
The
Hello all,
I have just a little question about some netstat output ..
If I do :
# netstat -rn -f encap
Routing tables
Encap:
Source Port DestinationPort Proto
SA(Address/Proto/Type/Direction)
192.168.0/24 0 192.168.50/24 0 0
zz.zz.zz.zz/esp/use/in
Steve Shockley ha scritto:
Christopher Bianchi wrote:
Thanks for the attention Nick, but 1) i can't boot from pxe ( damn Sharp
) and 2) i wish an elegance solution without pull out the hard disk.
Thanks
What would you do if you had to reload Windows 2000? I've never seen
a PC that could
that's what i was looking for!
Thanks.
On 10/10/07, Gilles Chehade [EMAIL PROTECTED] wrote:
On Wed, Oct 10, 2007 at 10:28:22PM -0300, Jo?o Salvatti wrote:
Hi all,
I wrote a kernel module for my 4.1 OpenBSD kernel. It compiles
normally, but when I try to load it, the modload says:
Christopher Bianchi wrote:
The situation is this: this notebook can boot from cdrom and floppy,
yes..but from docking station ! i haven't docking station ! Desperate :-(
Can it boot from a USB floppy?
Hello all,
My server freezed periodically like a log.
I can't understand why. There are no any special software and non
standard core, only packages from the same release.
Server got router role and many people depend on it.
Just freeze...
Please ask me additional information more than I
ropers ha scritto:
On 10/10/2007, Christopher Bianchi [EMAIL PROTECTED] wrote:
Nick Guenther ha scritto:
On 10/10/07, Christopher Bianchi [EMAIL PROTECTED] wrote:
Hello everyone. My situation is this:
i've a laptop, a Sharp pc-ax10 with Windows 2000 preinstalled , without
Craig Skinner ha scritto:
Christopher Bianchi wrote:
The situation is this: this notebook can boot from cdrom and floppy,
yes..but from docking station ! i haven't docking station ! Desperate
:-(
Can it boot from a USB floppy?
in the bios there aren't any voices for boot from usb... so i
Christopher Bianchi [EMAIL PROTECTED] writes:
Mmm i've tried qemu, but i wish install really OpenBSD on it. I've a
pcmcia but this notebook can't boot from it.
As Craig pointed out, if the machine has a USB port it's likely it can
boot from USB floppy.
--
Peter N. M. Hansteen, member of the
Hi,
after some sleep and coffee I am embarrassed to realize I made two mistakes:
- I didn't provide a GENERIC(.MP) dmesg
- I booted off the non-acpi-enabled kernel
Sorry for that. Below you can see two GENERIC.MP dmesgs (i386/amd64)
which clearly show that acpi is enabled and detected. However,
Peter N. M. Hansteen ha scritto:
Christopher Bianchi [EMAIL PROTECTED] writes:
Mmm i've tried qemu, but i wish install really OpenBSD on it. I've a
pcmcia but this notebook can't boot from it.
As Craig pointed out, if the machine has a USB port it's likely it can
boot from USB
How about an external CDROM drive connected to a parallel port? Micro
Solutions used to make one (called BackPack) that could connect via
USB, PCCard, and Parallel Port. Once you loaded the drivers under
Windows I'm pretty sure you could boot from it.
On 10/11/07, Christopher Bianchi [EMAIL
That's the best answer so far But, personally, I believe it can be done
without programming and hacking OpenBSD installation program to work
in the same way as Ubuntu install.exe
Here's how I thing it _might_ work. The point is to use a bootable linux
partition to bridge from !OpenBSD to
Christopher Bianchi a icrit :
Thanks for the attention Nick, but 1) i can't boot from pxe ( damn Sharp
) and 2) i wish an elegance solution without pull out the hard disk. Thanks
http://www.winimage.com/bootpart.htm maybe ?
and http://gparted.sourceforge.net/ for partition editing before.
On 10/11/07, Dmitry Slobodchikov [EMAIL PROTECTED] wrote:
Hello all,
My server freezed periodically like a log.
I can't understand why. There are no any special software and non
standard core, only packages from the same release.
Server got router role and many people depend on it.
Just
Gerald Thornberry schrieb:
How about an external CDROM drive connected to a parallel port? Micro
Solutions used to make one (called BackPack) that could connect via
USB, PCCard, and Parallel Port. Once you loaded the drivers under
Windows I'm pretty sure you could boot from it.
Hmm,
what
Hello Webmasters :-)
Theres is a Typo on http://www.openbsd.org/errata41.html :
Me thinks it should read 011:SECURITY FIX: October 10,2007
and not: 018:SECURITY FIX: October 10,2007
guido
Hi there,
I was wondering if anyone else is coming from the UK to go to OpenCon.
The best quote I have got via gatwick's airport's web-page is B#208.35,
which is ridiculous. I can't afford that on student budget. Has anyone
else got a better quote?
--
Best Regards
Edd
On 11/10/2007, Steve Shockley [EMAIL PROTECTED] wrote:
Douglas A. Tutty wrote:
So, there are some web sites that I need to access that use flash.
Mostly, online product catalogues. Does this mean that I have to use
Debian on my main box to do this since OpenBSD doesn't? Is that more
On Thu, 11 Oct 2007, Guido Tschakert wrote:
Theres is a Typo on http://www.openbsd.org/errata41.html :
Me thinks it should read 011:SECURITY FIX: October 10,2007
and not: 018:SECURITY FIX: October 10,2007
The same patch has incorrect number on errata40.html also:
018: SECURITY FIX: October
On 10/11/07, Guido Tschakert [EMAIL PROTECTED] wrote:
Gerald Thornberry schrieb:
How about an external CDROM drive connected to a parallel port? Micro
Solutions used to make one (called BackPack) that could connect via
USB, PCCard, and Parallel Port. Once you loaded the drivers under
Once upon a time there was a program called loadlin...
I've used it a couple times. It was quite annoying when, by mistake, double
clicked somewhere and, without further warning, a Linux distro was booting
right in front of me.
snip
Wasn't there, in the last century, a tool for windows to boot
Unfortunately, I am not able to compile nmap on OpenBSD 4.1 or 4.2 (release)
or 4.2-current. gmake dies at tcpip.o.
Earlier on (while I was having errors with SOC6 code), I did get a message
from Eddie Bell, author of portreasons.h, who was planning to look at his
portreasons.h., so that may
On 2007/10/11 15:53, Edd Barrett wrote:
I was wondering if anyone else is coming from the UK to go to OpenCon.
Unlikely (partly because actually getting to the airport is so
expensive in .uk)... but,
The best quote I have got via gatwick's airport's web-page is B#208.35,
which is ridiculous.
On 2007/10/11 17:39, Dmitry Slobodchikov wrote:
My server freezed periodically like a log.
Sounds similar to what can happen with amd64-on-i386 before the
changes for PAE were reverted just before 4.1.
Try 4.1 or newer.
Em Qua, 2007-10-10 C s 21:49 +0200, Christopher Bianchi escreveu:
Hello everyone. My situation is this:
i've a laptop, a Sharp pc-ax10 with Windows 2000 preinstalled , without
cdrom, floppy. I wish install OpenBSD on it. Naturally bios can't boot
from USB.
So i've thinked to boot the bsd.rd ,
On 2007/10/11 10:18, [EMAIL PROTECTED] wrote:
i want to include the functionality of our old Linksys BEFVP41 into our new
OpenBSD Router.
First step: PSK
One line like
ike passive esp tunnel from any to localnet main ... quick ... psk
foobar
in ipsec.conf works.
If I put in a second line
On Thursday 11 October 2007 07:39:44 Dmitry Slobodchikov wrote:
Hello all,
My server freezed periodically like a log.
I can't understand why. There are no any special software and non
standard core, only packages from the same release.
Server got router role and many people depend on it.
On 2007/10/10 15:40, Predrag Punosevac wrote:
Normally in FreeBSD I would do that either by chmod for /dev/lpt0 device
node or by editing /etc/devfs.conf with the line perm /dev/lpt0 0666.
In OpenBSD I did it with a chmod command but I have not noticed that there
is anything equivalent to
Stuart Henderson schrieb:
On 2007/10/11 10:18, [EMAIL PROTECTED] wrote:
i want to include the functionality of our old Linksys BEFVP41 into our new
OpenBSD Router.
First step: PSK
One line like
ike passive esp tunnel from any to localnet main ... quick ... psk
foobar
in ipsec.conf works.
Howdy
$ dmesg |head
OpenBSD 4.2-current (GENERIC) #419: Sun Oct 7 15:21:06 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
$ X -version
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System:
Hello,
First, sorry for posting here but the OpenVPN forum is full of spam/porn.
I would like to use OpenVPN to secure a wireless connection when I am on the
road and using an non-encrypted link.
Here's the setup. The server has a fixed IP address and runs on OpenBSD 4.1.
The client is a
Hi *,
I'm busy with a systrace/stsh implementation but there is a lack of standard
policies (IMHO). Any idea where I can find some ready-to-use policies?
I must be missing some important ones, when the user logs in, he got immediately
the following error:
systrace: getcwd: Permission denied
On 2007/10/11 20:28, Dusty wrote:
X11.10.0: partial match in /usr/X11R6/lib: major=11, minor=0 (bad major)
Happens no matter what x-dependent application i try install.
package snaps and X are out of sync; rebuild from ports, or wait
for new snaps.
Of course this won't work. You've installed a snapshot, but the
packages are for 4.2. Meanwhile, the library revisions have
increased. As you can see clearly in the messages.
This is nothing new, and should not surprise anyone by now.
Noone made any promises that snapshots/packages will track
On Thu, 13.09.2007 at 23:09:51 -0400, Jason Dixon [EMAIL PROTECTED] wrote:
It boggles my mind that we can lie around complacently, arguing about
installer menus and taking the bait from trolls, while our freedoms
are quickly eroding away. The rights and recognition of one of our
own
Hi
I've got a strange problem on my openvpn 2.0.6 (bridged) running on openbsd
4.1. When I'm pinging my lan (10.0.0.0/24) everything works fine but not when
I ping the openvpn server (10.0.0.1). It is no difference if I have disabled
PF or not. If I use the same configuration on another server
On Thu, Oct 11, 2007 at 07:50:50PM +0200, Arnim Sommer wrote:
Stuart Henderson schrieb:
On 2007/10/11 10:18, [EMAIL PROTECTED] wrote:
i want to include the functionality of our old Linksys BEFVP41 into our
new
OpenBSD Router.
First step: PSK
One line like
ike passive esp tunnel
On Thu, Oct 11, 2007 at 08:54:42PM +0200, Xavier Mertens wrote:
Hi *,
I'm busy with a systrace/stsh implementation but there is a lack of standard
policies (IMHO). Any idea where I can find some ready-to-use policies?
I must be missing some important ones, when the user logs in, he got
-Original Message-
From: Nick Guenther [mailto:[EMAIL PROTECTED]
Sent: Thursday, 11 October 2007 8:01 PM
To: Edwards, David (JTS)
Cc: misc@openbsd.org
Subject: Re: Which remvable drive is connected to which USB port
On 10/11/07, Edwards, David (JTS)
[EMAIL PROTECTED] wrote:
Hi
On 11/10/2007, Marcus Andree [EMAIL PROTECTED] wrote:
Once upon a time there was a program called loadlin...
Relevancy link: http://en.wikipedia.org/wiki/Loadlin
On 2007-10-11, Edd Barrett [EMAIL PROTECTED] wrote:
I was wondering if anyone else is coming from the UK to go to OpenCon.
The best quote I have got via gatwick's airport's web-page is B#208.35,
which is ridiculous. I can't afford that on student budget. Has anyone
else got a better quote?
Cool. Didn't noticed a version of grub that runs on windows.
snip
See: http://www.geocities.com/lode_leroy/grubinstall/
snip
Hi,
Is there an alternative PGP or OpenPGP-like program available other than PGP or
GnuPG/GPG?
Is there something along lines of a BSD-PG-type program (using BSD
licensing/copyright and basically non-GNU)?
Given the excellency OpenBSD has in the world of security, it would seem like
the
I should add... there seems to be a NetBSD variant, BPG, though I am not sure
of the reliability of that (does anyone here use it?).
If there might be an OpenBSD-based program of this general type, I would much
prefer using that over NetBSD's or any other.
Thanks!
On Thu, Oct 11, 2007 at
I've been evaluating OpenBSD as a desktop system while learning about it
on my lesser (older) hardware. I've learned a lot and will continue to
learn about OpenBSD but I don't think it will work as my primary
desktop.
Based on what I've learned here on Misc, I'd like to start a discussion
On Thu, 11 Oct 2007, Sean Darby wrote:
Hi,
Is there an alternative PGP or OpenPGP-like program available other
than PGP or GnuPG/GPG?
Is there something along lines of a BSD-PG-type program (using BSD
licensing/copyright and basically non-GNU)?
There is this:
Aside from some typos, I'll have to dispute the inclusion of movie watching
and movie editing. Very much, actually. I've never had noticeably poorer
movie watching/viewing performance on OpenBSD as opposed to other
distributions. (Gentoo is my other, and neither work better then the other
for
Douglas A. Tutty writes:
I think the following paragraphs would enhance the FAQ to
provide the person new to the OpenBSD focus a heads up on some
of the difficulties.
You are making some weird assumptions about what the desktop
is. My desktop is nothing like the one you describe, and
OpenBSD
On Thu, Oct 11, 2007 at 09:00:39PM -0400, Kevin Stam wrote:
Aside from some typos, I'll have to dispute the inclusion of movie watching
and movie editing. Very much, actually. I've never had noticeably poorer
movie watching/viewing performance on OpenBSD as opposed to other
distributions.
I just did a clean install of OpenBSD 4.1 x86 an athlon XP 2400 machine
with 512 megs ram and 120Gb hdd.
After the install, before i rebooted, I did some tweaking, rebooted,
downloaded the src and ports per the faq.
Everything fine so far. After this i tried to update the src with cvs
and it
I use OpenBSD as a desktop everyday and I have an 'entertainment center'
that delivers music, movies and arcade games which also runs OpenBSD.
OpenBSD is very well suited to being a media center due
to the lean default install and excellent package system.
On 10/12/07, Douglas A. Tutty [EMAIL
Douglas A. Tutty wrote:
I've been evaluating OpenBSD as a desktop system while learning about it
on my lesser (older) hardware. I've learned a lot and will continue to
learn about OpenBSD but I don't think it will work as my primary
desktop.
Based on what I've learned here on Misc, I'd
On Thu, 11 Oct 2007, Aaron wrote:
? share/man/mantest
unable to write, file adduser.8
No space left on device
and returns me to the #.
There is plenty of disk space.
Try a different cvs server:
http://openbsd.org/anoncvs.html#CVSROOT
Jeremy C. Reed
Intel integrated graphics card. Standard cheaper one found in laptops.
Usually watch in mplayer, default settings. Occasionally, VLC, default
settings. Of course, the intel cards don't have the same blob problems that
the more expensive ones tend to. I don't know about your experiences
comparing
On Thu, Oct 11, 2007 at 10:56:38PM -0400, Kevin Stam wrote:
Or perhaps you're being quite legitimate here. I just haven't heard of that
problem before, it's always been about 3d acceleration.
http://en.wikipedia.org/wiki/X_video_extension
It makes a big difference.
--
Brett Lymn
Warning:
However, it is also worth noting that some typical desktop needs and uses
are incompatible with the focus of OpenBSD. There are currently no video
cards that provide the necessary specifications to create open drivers for
all hardware function, most notably 3D acceleration. While more than
On Thu, Oct 11, 2007 at 11:57:18PM -0400, Kevin Stam wrote:
However, it is also worth noting that some typical desktop needs and uses
are incompatible with the focus of OpenBSD. There are currently no video
cards that provide the necessary specifications to create open drivers for
all
On Thu, Oct 11, 2007 at 10:36:27PM -0400, Nick Holland wrote:
Douglas A. Tutty wrote:
I've been evaluating OpenBSD as a desktop system while learning about it
on my lesser (older) hardware. I've learned a lot and will continue to
learn about OpenBSD but I don't think it will work as my
On 10/11/07, Toni Mueller [EMAIL PROTECTED] wrote:
On Thu, 13.09.2007 at 23:09:51 -0400, Jason Dixon [EMAIL PROTECTED] wrote:
It boggles my mind that we can lie around complacently, arguing about
installer menus and taking the bait from trolls, while our freedoms
are quickly eroding away.
64 matches
Mail list logo
