Still having problems. I can't get the soekris to boot as far as I can tell.
I used fdisk and created slice for OpenBSD and then used disklabel to
create the partitions inside it.
After that I extracted sets (base,etc,man) to the disk.
I used fdisk -u sd1 to update the MBR.
I modified the
On Saturday, August 18, 2007 at 16:33:52 +0300, Timo Myyrd wrote:
Still having problems. I can't get the soekris to boot as far as I can tell.
I used fdisk and created slice for OpenBSD and then used disklabel to
create the partitions inside it.
After that I extracted sets (base,etc,man) to the
Maurice Janssen wrote:
On Saturday, August 18, 2007 at 16:33:52 +0300, Timo Myyrd wrote:
Still having problems. I can't get the soekris to boot as far as I can tell.
I used fdisk and created slice for OpenBSD and then used disklabel to
create the partitions inside it.
After that I
On Saturday, August 18, 2007 at 18:35:37 +0300, Timo Myyrd wrote:
Maurice Janssen wrote:
If there's no output at all, then you might have the wrong serial cable
(there are quite a few types of serial null-modem cables) or the Soekris
is dead. You should at least see the Soekris powering up,
Maurice Janssen wrote:
On Saturday, August 18, 2007 at 18:35:37 +0300, Timo Myyrd wrote:
Maurice Janssen wrote:
If there's no output at all, then you might have the wrong serial cable
(there are quite a few types of serial null-modem cables) or the Soekris
is dead. You should at least
On Saturday, August 18, 2007 at 19:40:49 +0300, Timo Myyrd wrote:
Maurice Janssen wrote:
OK, should be fine then. How do you make the connection? I use
something like:
soekris|For hp300,i386,mac68k,macppc,mvmeppc,vax:\
:dv=/dev/tty00:tc=direct:tc=unixhost:
in /etc/remote and 'tip
Maurice Janssen wrote:
On Saturday, August 18, 2007 at 19:40:49 +0300, Timo Myyrd wrote:
Maurice Janssen wrote:
OK, should be fine then. How do you make the connection? I use
something like:
soekris|For hp300,i386,mac68k,macppc,mvmeppc,vax:\
Timo Myyrd wrote:
Still having problems. I can't get the soekris to boot as far as I can tell.
I used fdisk and created slice for OpenBSD and then used disklabel to
create the partitions inside it.
After that I extracted sets (base,etc,man) to the disk.
I used fdisk -u sd1 to update the
Just tried to install OpenBSD 4.1 to my Soekris 4801 box but I'm having
little difficulties in it.
I added the CF card to a reader and connected it to my laptop which runs
openbsd. It finds the reader and the card (sd3) in it.
I tried to create partitions to the disk with disklabel -E sd3. It
On 2007/08/17 15:01, Timo Myyrd wrote:
I tried to create partitions to the disk with disklabel -E sd3.
fdisk first.
And am I correct to assume that I get my soekris working by just extracting
the sets manually to the created partitions and modifying the config files?
Don't forget -p, though
10 matches
Mail list logo
