Re: [Mjpeg-users] Help reading Muxing TS

On 15/11/2011, at 4:47 PM, sam wrote: > Hi Mark, > > Thank you for your reply, > > I have hardware encoder , which gives IP out , and it has 8 > channels , each channel gives me 2 ts. > > ffmpeg will encode again , then it is no use of using my encoder. ffmpeg can be used to mux without encod

Re: [Mjpeg-users] Help reading Muxing TS

Hi Mark, Thank you for your reply, I have hardware encoder , which gives IP out , and it has 8 channels , each channel gives me 2 ts. ffmpeg will encode again , then it is no use of using my encoder. my case to mux n number of ts into single ts , which means MPTS , contains number of programs w

Re: [Mjpeg-users] Help reading Muxing TS

On 14/11/2011, at 3:37 PM, sam wrote: > Dear Friend , > > I am a professor , i want to do it for my research project for > students.partial please help me. > > I want to Multiplex n number of TS using mplex, i got downloaded > from mjpeg.sourceforge.net and installed , how to mux continuousl

[Mjpeg-users] Help reading Muxing TS

*Dear Friend ,* I am a professor , i want to do it for my research project for students.partial please help me. I want to Multiplex n number of TS using *mplex*, i got downloaded from * mjpeg.sourceforge.ne*t and installed , how to mux continuously Real time. Command :* iso13818ts . > Muxou

Re: [Mjpeg-users] Help reading Muxing TS

Hi Sam, Sorry, I haven´t worked with the software for a long time (approx. 9 years), so I know very little about it - at that time, it was not always possible to demux all transport streams, simply because the standard was too vague. I can only refer to the mailing list mjpeg-users, which I

Re: [Mjpeg-users] Help reading Muxing TS

Hallo sam wrote: > *Dear Friend ,* > > I am a professor , i want to do it for my research project for > students.partial please help me. > > I want to Multiplex n number of TS using *mplex*, i got downloaded from > *mjpeg.sourceforge.ne *t and installed , > how to mux

[Mjpeg-users] Help reading Muxing TS

*Dear Friend ,* I am a professor , i want to do it for my research project for students.partial please help me. I want to Multiplex n number of TS using *mplex*, i got downloaded from * mjpeg.sourceforge.ne*t and installed , how to mux continuously Real time. Command :* iso13818ts . > Muxou

[Mjpeg-users] Help reading Muxing TS

*Dear Friend ,* I am a professor , i want to do it for my research project for students.partial please help me. I want to Multiplex n number of TS using *mplex*, i got downloaded from * mjpeg.sourceforge.ne*t and installed , how to mux continuously Real time. Command :* iso13818ts . > Muxou

Re: [Mjpeg-users] Help about VOB file creating

Hallo > I am very sorry, but this is outside my expertise - someone else who knows > ? > >> Hello >> I was developing a tool that converts a set of photos to a DVD film >> what i'm stuck in now is how to convert a stream of frames into a vob files >> using C# component >> >> If you can help me

Re: [Mjpeg-users] Help about VOB file creating

Hej Athanasius, I am very sorry, but this is outside my expertise - someone else who knows ? > Hello > I was developing a tool that converts a set of photos to a DVD film > what i'm stuck in now is how to convert a stream of frames into a vob files > using C# component > > If you can help me

Re: [Mjpeg-users] help

Hallo > Is there anyone who used the Mjpeg-tools to capture a video > from network Camera? I do not think so, sorry. How do you get the data from the network camera? auf hoffentlich bald, Berni the Chaos of Woodquarter Email: [EMAIL PROTECTED] www: http://www.lysator.liu.se/~gz/bernhard

[Mjpeg-users] help

Hello, Is there anyone who used the Mjpeg-tools to capture a video from network Camera? Regards Liang _ 与世界各地的朋友进行交流，免费下载 Live Messenger; http://get.live.com/messenger/overview ---

Re: [Mjpeg-users] Help with mjpegtools compilation problem

On Fri, 22 Dec 2006, Stan Gammons wrote: > I have the CVS version from a couple of days ago running on SuSe 10.2 > It compiles fine as it does on SuSe 10.1 32 bit OS in each case. The 32 The URL that was giaven pointed at a "fixed in beta 2". Perhaps an earlier (snapshot or bet

Re: [Mjpeg-users] Help with mjpegtools compilation problem

On Fri, 2006-12-22 at 08:15 -0800, Steven M. Schultz wrote: > It would seem that there is a strange interaction between SuSE 10.2 > and g++ 4.1.x Hi Steven, I have the CVS version from a couple of days ago running on SuSe 10.2 It compiles fine as it does on SuSe 10.1 32 bit OS in ea

Re: [Mjpeg-users] Help with mjpegtools compilation problem

Thanks, Steven, I'll go ahead and submit the bug info, since the compiler did say I should do so ;) We'll see what happens. Regarding the supposed "fix", the bugzilla page referenced indicates the bug is 'Resolved' and comment 2 says "fixed". Not being a C++ programmer, I made an erroneous a

Re: [Mjpeg-users] Help with mjpegtools compilation problem

> From: Bob McGowan <[EMAIL PROTECTED]> > Thanks, Steven, I'll go ahead and submit the bug info, since the > compiler did say I should do so ;) We'll see what happens. Can't hurt anything ;) > Regarding the supposed "fix", the bugzilla page referenced indicates the > bug is 'Resolved'

Re: [Mjpeg-users] Help with mjpegtools compilation problem

> From: Bob McGowan <[EMAIL PROTECTED]> > > Additional background: Debian 'etch' (testing), gcc 4.1 or gcc 3.4, Sigh, seems that the gcc folks are efficient and consistent, they mananged to break both the 3.x and 4.x C++ compilers. g++ 4.0.2 works fine, g++ 2.95.3 works

[Mjpeg-users] Help with mjpegtools compilation problem

Additional background: Debian 'etch' (testing), gcc 4.1 or gcc 3.4, Cinelerra 2.0 source. The mjpegtools that came with Cinelerra was mjpegtools-1.6.3-rc1 but I tried upgrading to mjpegtools-1.8.0 downloaded from the Sourceforge site. When the build process gets to the file "newdenoise.cc",

Re: [Mjpeg-users] help

Nonono, I am talking about MPlayer, as on http://www.mplayerhq.hu/ _not_ Mediaplayer. I am sorry, i am not involved in video watermarking, and therefore don't know where to get these video sequences from. (anyone else ?) > yes i have tried y4m format in media player but i am unable to read or p

Re: [Mjpeg-users] Help

On Fri, 6 Feb 2004, Philip Coltart wrote: > I am using Final Cut to get a nice m2v file at 7.5 mbs and aiff audio > which I convert to MP2 using BitVice Helper. When I mux them together > in Bitvice Helper I get a nice MPEG2 with a rate of about 7.8mbs but in > the file header is a mux rate o

[Mjpeg-users] Help

I am using Final Cut to get a nice m2v file at 7.5 mbs and aiff audio which I convert to MP2 using BitVice Helper. When I mux them together in Bitvice Helper I get a nice MPEG2 with a rate of about 7.8mbs but in the file header is a mux rate of 108000. So when I send it to the folks at Telest

Re: [Mjpeg-users] Help urgently needed

On Mon, 2003-09-15 at 11:44, GMM wrote: > I am looking for a PCI - Capturecard for Linux. The card should work with > analog and digital pictures from Hi 8 and DV camcorder. If your camcorder can do DV, then probably any FireWire card will work. To capture DV on Linux, you can either use dvgrab

Re: [Mjpeg-users] Help urgently needed

On Mon, 15 Sep 2003 21:59:23 +0200, GMM <[EMAIL PROTECTED]> wrote: Thank you for your answer, but unfortunately I understand only about 10 % what you suggest. 1. What is Canopus ADVC - 100 ? An analog to digital video converter. Several people on this list use them. 2. Which Firewire card do y

Re: [Mjpeg-users] Help urgently needed

On Mon, 15 Sep 2003 20:44:51 +0200, GMM <[EMAIL PROTECTED]> wrote: Hello everyone! I urgently need your help! I am looking for a PCI - Capturecard for Linux. The card should work with analog and digital pictures from Hi 8 and DV camcorder. I use the Canopus ADVC-100 with a firewire card. The Fi

Re: [Mjpeg-users] Help urgently needed

If it's dv, why not just use firewire? Jon On Mon, 15 Sep 2003, GMM wrote: > Hello everyone! > > I urgently need your help! > > I am looking for a PCI - Capturecard for Linux. The card should work with > analog and digital pictures from Hi 8 and DV camcorder. > > I found a card which is Pinnacle

[Mjpeg-users] Help urgently needed

Hello everyone! I urgently need your help! I am looking for a PCI - Capturecard for Linux. The card should work with analog and digital pictures from Hi 8 and DV camcorder. I found a card which is Pinnacle Studio 8 - but I did not find any support on your page for Linux 8.1. Please help me, si

[Mjpeg-users] Help me, please! (fwd)

Servus, Gernot -- TW-E-L-C-O-M-E--T | The Austria <=> Sweden connection.H OHomepage: http://www.lysator.liu.se/~gzE \--F-U-T-U-R-E---

[Mjpeg-users] Help me, please! (fwd)

I will try to have a look at it later, maybe someone can already help ? :-) Servus, Gernot -- Forwarded message -- Date: Fri, 15 Aug 2003 14:11:32 +0300 From: Tykhonov Sergey <[EMAIL PROTECTED]> To: Gernot Ziegler <[EMAIL PROTECTED]> Subject: Help me, please! Hello, Gernot Ziegl

Re: [Mjpeg-users] Help check WinTV Go, EnsonIQ setup - still no sound when recording audio/video

Hallo > I seem to be running into problems recording sound under both streamer (from > XawTV) and lavrec (from mjpegtools). Using lavrec and the following script, I > get the following: Thats not good. Have you tried to record only the sound with any audio recording application ? Till you

Re: [Mjpeg-users] Help check WinTV Go, EnsonIQ setup - still nosound when recording audio/video

On Sun, 22 Jun 2003 17:05:48 -0400 Bruce Griffis <[EMAIL PROTECTED]> wrote: >INFO: [lavrec] Audio sample size: 8 bit >INFO: [lavrec] Audio sampling rate: 44100 Hz >INFO: [lavrec] Audio is MONO >INFO: [lavrec] Audio input recording level: Use mixer setting Have yo

Re: [Mjpeg-users] Help check WinTV Go, EnsonIQ setup - still nosound when recording audio/video

Just a guess (I havn't used lavrec to record), but do you have line in or whatever input your using set as the "port" to capture audio from? -- Richard Baverstock <[EMAIL PROTECTED]> --- This SF.Net email is sponsored by: INetU Attention Web

[Mjpeg-users] Help check WinTV Go, EnsonIQ setup - still no sound when recording audio/video

Hey all, I got my WinTV Go card running okay under XawTV, and am now able to play TV on the PC. The next part (well, my original goal) is to record from Super8 and VHS video to make a presentation. I seem to be running into problems recording sound under both streamer (from Xaw

Re: [Mjpeg-users] Help with revert 2-3 pulldown, please

Thanks very much for the reply. You explain the problem very well and I know understand why what I want is very difficult to get. I tried yuvdenoise -I, to just do the deinterlace as it says in my man page, but that option no longer seems to be available, as yuvdenoise prints the usage instructio

Re: [Mjpeg-users] Help with revert 2-3 pulldown, please

>Ok, I should have read the page closer. Thing is though I want to leave >it at 30 fps as it needs to sync with some other source. When played on >the disc it is 30fps, so why can't I get 30 fps with the mpeg? It's a "you can't have it both ways" problem (and there must be something in the M

Re: [Mjpeg-users] Help with revert 2-3 pulldown, please

Ok, I should have read the page closer. Thing is though I want to leave it at 30 fps as it needs to sync with some other source. When played on the disc it is 30fps, so why can't I get 30 fps with the mpeg? On Fri, 2003-03-14 at 23:54, Matto Marjanovic wrote: > >I have an NTSC 30fps interlaced

Re: [Mjpeg-users] Help with revert 2-3 pulldown, please

>I have an NTSC 30fps interlaced laserdisc with some footage which I am >told was originally 24fps. I have run lavrec, then yuvscaler -M >LINE_SWITCH and the result looks good, except frames 4/5 from each >sequence of 5 have a interlace effect. I then run yuvkineco -F 4 and >this interlace

Re: [Mjpeg-users] Help with revert 2-3 pulldown, please

On 14 Mar 2003, scott wrote: > I have an NTSC 30fps interlaced laserdisc with some footage which I am > told was originally 24fps. I have run lavrec, then yuvscaler -M > LINE_SWITCH and the result looks good, except frames 4/5 from each > sequence of 5 have a interlace effect. I then run yuvkinec

[Mjpeg-users] Help with revert 2-3 pulldown, please

I have an NTSC 30fps interlaced laserdisc with some footage which I am told was originally 24fps. I have run lavrec, then yuvscaler -M LINE_SWITCH and the result looks good, except frames 4/5 from each sequence of 5 have a interlace effect. I then run yuvkineco -F 4 and this interlace effect is g

Re: [Mjpeg-users] Help with Buz

Hi Bruno, On Mon, 2003-02-24 at 22:30, Bruno R. Barreyra wrote: > I could not get the 0.9 driver to compile, either 0.9.1 or the CVS branch. Please report any compiler errors so I can fix it. See the FAQ for more info, it still needs tuning. Basically, *decrease* buffer size, quality etc. and se

Re: [Mjpeg-users] Help with Buz

Hallo > I'm trying (again) to get my Buz to work properly. So I've suceeded so far > in using the stable driver from CVS (straight 0.8 would not compile for me) > and installing mjpegtools-1.6.1. So you are using the CVS zoran driver version with the tag: ZORAN_VIDEODEV_2 ? > Now, I can sort of c

[Mjpeg-users] Help with Buz

I'm trying (again) to get my Buz to work properly. So I've suceeded so far in using the stable driver from CVS (straight 0.8 would not compile for me) and installing mjpegtools-1.6.1. Now, I can sort of capture video, but it will stop at random times, anywhere from 10 seconds to 8 minutes. That 8

Re: [Mjpeg-users] Help from MPEG container expert needed : MPEG1/2 implementation into new open standard matroska container

"Vladimir Shved" <[EMAIL PROTECTED]> wrote > I think, someone misspelled "matroska", it should be "matreshka" or at least > would sound/look better to its true meaning . I think you guys trying to > make the name refer to russian "doll-in-the-doll" toy/souvenir but currently > the name seems to ref

Re: [Mjpeg-users] Help from MPEG container expert needed : MPEG1/2 implementation into new open standard matroska container

Vladimir Shved wrote: > I think, someone misspelled "matroska", it should be "matreshka" or at least > would sound/look better to its true meaning . I think you guys trying to > make the name refer to russian "doll-in-the-doll" toy/souvenir but currently > the name seems to refer to sailor girl in

RE: [Mjpeg-users] Help from MPEG container expert needed : MPEG1/2 implementation into new open standard matroska container

Title: RE: [Mjpeg-users] Help from MPEG container expert needed : MPEG1/2 implementation into new open standard matroska container I think, someone misspelled "matroska", it should be "matreshka" or at least would sound/look better to its true meaning . I think you guy

[Mjpeg-users] Help from MPEG container expert needed : MPEG1/2 implementation into new open standard matroska container

Hi, i am one of the project admins of matroska container format ( http://matroska.org ) and turning to these 2 MLs ( transcode.devel and mjpeg.user ) searching for help. We are in the process of releasing our basic file I/O lib called *libmatroska*, and plan to be able to release a first set of f

Re: [Mjpeg-users] help needed with DV audio sync problem

tcprobe -i anyoldDVfile.avi > > Seems you are using transcode ? > > Have you ever thought about using the mjpeg tools direct with the > smilutils (I think they are called that name). Actually I do :-) but I also have transcode around and tend to occasionaly use bits of it. My vhs PAL to SVCD is

Re: [Mjpeg-users] help needed with DV audio sync problem

Hallo > I'm having problems related to loss of audio video sync when I go from DV to > (x)SVCD on long pieces of video. It would be a help if anyone who captures > with DV could let me have a copy of the output of running: > > tcprobe -i anyoldDVfile.avi Seems you are using transcode ? Have yo

[Mjpeg-users] help needed with DV audio sync problem

I'm having problems related to loss of audio video sync when I go from DV to (x)SVCD on long pieces of video. It would be a help if anyone who captures with DV could let me have a copy of the output of running: tcprobe -i anyoldDVfile.avi Preferrably on a file captured using dvgrab with DV2 f

Re: [Mjpeg-users] help - lavrec problems

>>>I have been unable to get streamer working satisfactorily. >> >>What sort of problems are you seeing? I'm using version 3.73 with a >>few self-written patches. > >We're straying a bit OT here but hey :-) I can accept that. :-) For everyone's info, I answered him privately, sending him the pat

RE: [Mjpeg-users] help - lavrec problems

Title: RE: [Mjpeg-users] help - lavrec problems > Does --file-flush=0 make any difference? I think it does not make difference but lowering -q indeed helps. > > I'm wondering if there is a way to tell if lavrec uses zoran or > > software mjpeg codec because I cant tel

Re: [Mjpeg-users] help - lavrec problems

On Thu, 23 Jan 2003 08:16:44 -0800 Steven Boswell <[EMAIL PROTECTED]> wrote: > >I have been unable to get streamer working satisfactorily. > > What sort of problems are you seeing? I'm using version 3.73 > with a few self-written patches. We're straying a bit OT here but hey :-) I cannot get cl

Re: [Mjpeg-users] help - lavrec problems

>>My CPU just isn't fast enough to do 100% JPEG compression of incoming >>frames in real time, and I'm not willing to give up that quality. > >The Marvel does it in hardware of course That probably helps -- I have a Pinnacle PCTV. I bought it because it's a Brooktree 878 and thus well-supported

Re: [Mjpeg-users] help - lavrec problems

On Wed, 22 Jan 2003 18:07:46 -0700 Vladimir Shved <[EMAIL PROTECTED]> wrote: > Okay, if those cards are so bad, what would be good one or is there > list of aproved sound cards? As you have a soundblaster it may be worth trying that. People seem to have good results with those. Alternatively, hun

Re: [Mjpeg-users] help - lavrec problems

On Wed, 22 Jan 2003 16:46:42 -0800 Steven Boswell <[EMAIL PROTECTED]> wrote: > >No, but with -d 1 much above -q 50 I get dropped frames. > > That's the main reason I stopped using lavrec for doing my > recordings. My CPU just isn't fast enough to do 100% JPEG > compression of incoming frames in r

RE: [Mjpeg-users] help - lavrec problems

Hi Vladimir, On Thu, 2003-01-23 at 01:50, Vladimir Shved wrote: > > > Even if I get .avi file it does not seem to be > > > MJPEG format as I can play it on Windows 2000 machine without > MJPEG > > > codec. The most successfull command line was "lavrec -f a -i T-d 1 > > > -q 80 -U -s -R l -C us-bca

Re: [Mjpeg-users] help - lavrec problems

>>Here's the script I use to record all of my VCDs. > >I'll try it but question, what version of xawtv do you use? marvels >page on sourceforge has patches up to 3.74, which I've been trying to >use and did not like. I'm using 3.73, which came with my Red Hat 7.3. I'm also doing this on an Athlo

RE: [Mjpeg-users] help - lavrec problems

Title: RE: [Mjpeg-users] help - lavrec problems > -Original Message- > From: Steven Boswell [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, January 22, 2003 5:47 PM > To: [EMAIL PROTECTED] > Subject: Re: [Mjpeg-users] help - lavrec problems > > > >>&quo

RE: [Mjpeg-users] help - lavrec problems

Title: RE: [Mjpeg-users] help - lavrec problems > -Original Message- > From: Martin Collins [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, January 22, 2003 5:06 PM > To: [EMAIL PROTECTED] > Subject: Re: [Mjpeg-users] help - lavrec problems > > > On Wed, 22

Re: [Mjpeg-users] help - lavrec problems

>>"Error reading audio: Reason: Error Audio ring buffer overflow" >>errors. > >What sound card do you have? Please don't say "the one built into my >VIA mobo" :-) OK, I won't say it. LOL >>Does anyone know what is going on here? > >No, but with -d 1 much above -q 50 I get dropped frames.

Re: [Mjpeg-users] help - lavrec problems

On Wed, 22 Jan 2003 14:13:01 -0700 Vladimir Shved <[EMAIL PROTECTED]> wrote: > After many tries I compiled and installed mjpegtools-1.6.1, no > quicktime, no divx, no Gtk+ support. Do you have the appropriate -dev packages installed? > and "Error reading audio: Reason: Error Audio ring buf

[Mjpeg-users] help - lavrec problems

Title: help - lavrec problems After many tries I compiled and installed mjpegtools-1.6.1, no quicktime, no divx, no Gtk+ support. Now I can record for few minuters, sometimes can't record at all but get "i33 STOP, hard " and "Error reading audio: Reason: Error Audio ring buffer overfl

Re: [Mjpeg-users] Help for VCD from Stills

On Sonntag, 5. Januar 2003 20:57, Norman Nunn wrote: > 4. To generate cue & bin VCD image files > > vcdimager --iso-volume-label="My Text VCD" *.mpg vcdxgen *.mpg vcdxbuild videocd.xml will probably do it (except that you will have to alter the xml file to reflect the volume label). -- Hannes

Re: [Mjpeg-users] Help for VCD from Stills

Hallo > 4. To generate cue & bin VCD image files > > vcdimager --iso-volume-label="My Text VCD" *.mpg It's Not that easy. If you have still streams, you have to use a xml file as source for vcdimager that contains information about how long you want to show the still stream. Pllease take a look

[Mjpeg-users] Help for VCD from Stills

I am new to the video business and to this mail list but feel like I have run into a brick wall. I am trying to create VCD from jpegs from a digital camera. I have gotten two different error messages during the final step when I try to create the VCD: 1. Drive does not accept any cue sheet varia