Hi,
I have successfully compiled the openssl already, but i am confuse on what
parameters i should place in the compilation of modssl. I'm using RedHat Linux 6.2,
Apache 1.3.12 (RPM version), JServ 1.1.2 (RPM version), openssl 0.9.5a.
i don't know what to place in the
when i install linux red hat 7 it's already
installed apache, modssl and openssl, i would like to know if this installation
is correct or do i have to install this components by myself in order to
establish my own CA and make my system work as a PKI, thanks.
jcaa
I'm a newbie to SSL. I followed the directions on
http://www.modssl.com/example/ to do a simple test install on a RH 6.1
box. After everything installed apparently without problems, I viewed:
/usr/local/apache_1.3.12/conf/ssl.key/README.KEY
and tried to run
$ openssl rsa -noout -text
rrors that we get :
--
Configuring mod_ssl/2.6.6 for Apache/1.3.12
./configure:Error: Cannot find Apache 1.3 source tree under
/path/to/this/apache
_1.3.12
./configure:Hint: Please specify location via --with-apache=DIR
The installation worked fine on a se
-
From: Jackson Ching [mailto:[EMAIL PROTECTED]]
Sent: 15 September 2000 00:18
To: [EMAIL PROTECTED]
Subject: Installation
Hi,
I have successfully compiled the openssl already, but i am confuse
on what parameters i should place in the compilation of modssl. I'm using
RedHat Linux 6.2
./apache_1.3.12 \
# --with-ssl=../openssl-0.9.5a
# etc.
#
# hth,
#
# Phil
#
# -Original Message-
# From: Jackson Ching [mailto:[EMAIL PROTECTED]]
# Sent: 15 September 2000 00:18
# To: [EMAIL PROTECTED]
# Subject: Installation
#
#
# Hi,
#
# I have successfully compiled the openssl
If you want to use rpm version of apache, you must install also APACHE-DELEVEL
for apxs and download the source from www.apache.org or extractin from
APACHE-1.3.12.src.rpm.
It's an hard work, because you have to compile mod_ssl and apache, and then
replace the binary installed by the RPM.
It's mor
0 09:24
To: [EMAIL PROTECTED]
Subject: Re: Installation
If you want to use rpm version of apache, you must install also
APACHE-DELEVEL
for apxs and download the source from www.apache.org or extractin from
APACHE-1.3.12.src.rpm.
It's an hard work, because you have to compile mod_ssl and a
-devel-1.3.12.2.6.6-1.i386.rpm
mod_ssl-2.6.6-1.i386.rpm
mod_ssl-manual-2.6.6-1.i386.rpm
apache-mod_ssl-JServ-1.1.2-2.i386.rpm
and you should end up with a working Apache/mod_ssl installation.
You will have to uninstall your exi
Thanks for the Answers... i really appreciate that. thank you once again.
jack
__
Apache Interface to OpenSSL (mod_ssl) www.modssl.org
User Support Mailing List [EMAIL PROTECTED]
Automated
ownload/install the
> following RPMs:
>
> openssl-0.9.5a-1.i586.rpm
> apache-mod_ssl-1.3.12.2.6.6-1.i386.rpm
> apache-mod_ssl-devel-1.3.12.2.6.6-1.i386.rpm
> mod_ssl-2.6.6-1.i386.rpm
> mod_ssl-manual-2.6.6-1.i386.rpm
> apache-mod_ssl-JServ-1.1.2-2.i386.rpm
>
> and you
well.
Since I have modules that are compiled into Apache I would still like to
have them there after the mod_ssl installation too. But when running the
Step-By-Step installation on the modssl.org site I realized that this
would most likely destroy any previous makefiles created for Apache.
And
I'm trying to do the APACI config with:
SSL_BASE=../openssl/openssl-0.9.6 ./configure [options]
I've also tried SSL_BASE=/usr/bin where I can see that the openssl
binary is.
Either way, I get this:
Configuring for Apache, Version 1.3.14
+ using installation path layout: RedHat (con
I am trying to build apache+mod-ssl, on a solaris 8 box, given apache 1.3.9,
mod_ssl-2.4.10-1.3.9 and openssl-0.9.6. Following the mod_ssl
INSTALL file I built openssl and configured mod_ssl with:
./configure --with-apache=/export/developers/rmb/apache-1.3.9/src/apache_1.3.9.
I then configured a
Hi,
i had Apache 1.3.19 with Jserv 1.1.2 installed successfully.
In order to make Apache handling the HTTPS protocol, i followed the
mod_ssl
installation guide to download
Apache 1.3.19, mod_ssl 2.8.2-1.3.19, OpenSSL 0.9.6a, MM 1.1.3, Perl
5.6.0
and extracted the packages.
1. i Configured and
On Wed, Sep 19, 2001 at 02:07:15PM -0500, Juan Carlos Albores Aguilar wrote:
> when i install linux red hat 7 it's already installed apache, modssl and openssl, i
>would like to know if this installation is correct or do i have to install this
>components by myself in order to es
Hi i created a certificate to used by apache but cant figure out how &
were to install it help please.
__
Apache Interface to OpenSSL (mod_ssl) www.modssl.org
User Support Mailing List [EM
Hi;
I built openssl, apache & modssl as per the instructions in the latter.
When I type in the command ./apachectl startssl all comes up fine so long
as I've commented out certain things (see below) in httpd.conf. But
https://blah.com doesn't resolve. ./apachectl startssl chokes on the
followi
Pardon my posting these questions, but I did not see this
addressed in any FAQs or HOWtos. I am having difficulty
installing my CA signed certificates. I am not sure if the
problem lies with the certificate itself or the root and chain
certificates that also need to be installed. If it is the
Hi,
here are my facts: UNIX solaris 2.6, Apache 1.3.4, SSLeay 0.9.0b,
mod_ssl-2.2.3-1.3.4
Ive installed SSLeay, Apache and going thru the installation process of
mod_ssl. Configuring with Apache (./configure
--with-apache=../apache_1.3.4) no prob. But when i try to configure with
SSLeay
I'm running RH 6, with mod_ssl 2.3.11-1.3.6, apache 1.3.6, openssl
0.9.4, and rsaref 2.0.
I go through the entire installation process, and run
`apachectl start` and http works fine. When I run
`apachectl startssl` http still works, but https does not.
I'm using the "All-In-On
Hello Everyone,
I am a new addition to this list. I have got some installation
problem in mod-ssl. I have downloaded Windows Versions of
apache_1.3.9.tar.gz, mod_ssl-2.4.9-1.3.9.tr.gz, openssl-0.9.4.tr.gz and
unpacked into my "D" drive. I have installed the Open SSL successful
Hello,
I have installed openssl-0.9.4 without any errors on WindowNT system.
During my installation process of mod_ssl-2.4.9-1.3.9 it asked to copy
"ssleay.exe" from open32dll directory of openssl-0.9.4. But I could not
find that file in open32dll directory, infact nowhere in my system.
I am a total novice and tried to use the step-by-step installation illustration given in Examples and Tests on the modssl site. This is what I did:
1. Got the tar files: apache_1.3.9, mod_ssl-2.4.9-1.3.9 and openssl-0.9.4.
2. The instructions don't mention where to put the files to untar
Hi.
It seems that I can't compile mod_ssl if I already have Apache installed
using RPMs, it looks like you always have to compile mod_ssl and Apache
at the same time. Right? Wrong?
Thanks
__
Apache Interface to OpenSSL (mod_ssl)
Hi folks.. I'm a newbie here, installing Apache and OpenSSL and mod_ssl
from source on my RedHat 7.3 (I uninstalled the RPMS)
Call me stupid, but I must be missing something...
The installation instructions are pretty straightforward but I have one
major problem - the httpd.conf do
Hi,
I have installed verisign certificate on our web server by using two
direcitve lines
(SSLCertificateFile & SSLCertificatekeyFile) in httpd.conf file.
I could see the correct page from browser when we typed
https://www.oneloyalty.com . But the second screen of Security Alert was
shown and the
On Mon, Sep 04, 2000 at 12:55:30PM +0530, Vinoj Vijayan wrote:
> Hi
> We are trying to install mod_ssl 2.6 with Apache 1.3.12 on Solaris 2.7 on
> which there is another version of Apache(1.3.6) already installed.
>
> We are getting the following error statements on trying to install the
> mod_ssl
exact syntax mentioned in the
document.
And is the installation of Jakarta-Tomcat in anyway related to the
installation of mod_ssl ? The installation of this one is also giving many
errors which are mainly Java errors mentioning that the class/method is not
found. When we installed Tomcat (after t
On Mon, Sep 04, 2000 at 06:21:35PM +0530, Vinoj Vijayan wrote:
>
> Thanks for the info.I guess I would require more clarifications ...
> What does the 'prefix' signify ?
It is passed straight through to Apache's configure ... from apache:
--prefix=PREFIXinstall architecture-independent
hello!
Two questions about installing mod_ssl in our Apache web server under
SuSE Linux 6.3 :
1) What is better, linking mod_ssl as a DSO or as a Module?
2) Is it true that the server won't work at all in non SSL mode if
we have SSL installed but not the certificate?
T
Hi Jackson, Your options were not correct. Key '--with-apache' has to
point on directory with apache tree, for instance'
--with-apache=../apache_1.3.12' but not /home/httpd or some like this
with binaries.
JC> Phil,
JC> what is the root directory of apache? i use the RPM version.
JC>
The very short explanation is that you must build Apache+mod_ssl from
scratch the first time. So get the source packages and get started
on the install procedure "The All-In-One mod_ssl+APACI way [FOR JOE
AVERAGE]".
vh
Mads Toftum
--
`Darn it, who spiked my coffee with water?!' - lwall
_
Richard Botting - Development - Torr Hall wrote:
> I am trying to build apache+mod-ssl, on a solaris 8 box, given apache 1.3.9,
> mod_ssl-2.4.10-1.3.9 and openssl-0.9.6. Following the mod_ssl
> INSTALL file I built openssl and configured mod_ssl with:
>
> ./configure --with-apache=/export/develop
On Mon, 11 Dec 2000, Richard Botting - Development - Torr Hall wrote:
> I am trying to build apache+mod-ssl, on a solaris 8 box, given apache 1.3.9,
> mod_ssl-2.4.10-1.3.9 and openssl-0.9.6. Following the mod_ssl
> INSTALL file I built openssl and configured mod_ssl with:
>
> ./configure --with-
On Mon, Dec 11, 2000 at 05:26:16PM +, Richard Botting - Development - Torr Hall
wrote:
> I am trying to build apache+mod-ssl, on a solaris 8 box, given apache 1.3.9,
> mod_ssl-2.4.10-1.3.9 and openssl-0.9.6. Following the mod_ssl
> INSTALL file I built openssl and configured mod_ssl with:
Yo
Thanks for the advice, downgrading openssl to 0.9.4 worked a treat!
> On Mon, Dec 11, 2000 at 05:26:16PM +, Richard Botting - Development - Torr
Hall wrote:
> > I am trying to build apache+mod-ssl, on a solaris 8 box, given apache 1.3.9,
> > mod_ssl-2.4.10-1.3.9 and openssl-0.9.6. Following
Hi,
i had Apache 1.3.19 with Jserv 1.1.2 installed and started successfully on
Solaris 2.6.
In order to make Apache handling the HTTPS protocol, i followed the mod_ssl
installation guide to download
Apache 1.3.19, mod_ssl 2.8.2-1.3.19, OpenSSL 0.9.6a, MM 1.1.3, Perl 5.6.0
and extracted the
Hello,
I want to test a small program through SSL on Apache(1.3.14) on linux. I am
trying to build/install mod_ssl with Apache but in vain. Is there site from
where I can just get the installable of mod_ssl/openssl/mm/apache(for
1.3.14) without bothering to build the source.
Thanks in advance,
An
Hi,
I have installed the W32 port of Apache 1.3.22 and Mod SSL 2.8.5.
My problem is that "apache -t" complains about not finding the file modules/mod_ssl.so.
The LoadModule command looks like:
LoadModule ssl_module modules/mod_ssl.so
Indeed the file is located in the modules directory (size a
andrew reid wrote:
>
> Hi i created a certificate to used by apache but cant figure out how &
> were to install it help please.
You need a cert and a key. When you compiled apache with mod_ssl, and
did "make install", they should have been installed for you. Anyway,
they go in your apache conf
Ok im useing mandrake linux & it came with a predefined
key . i created a news key for my site but ,when i put the certificate
and the key in /etc/httpd/ssl dir the server wont start
On Thu, Mar 04, 1999, Gilles L. Chong Hok Yuen wrote:
> here are my facts: UNIX solaris 2.6, Apache 1.3.4, SSLeay 0.9.0b,
> mod_ssl-2.2.3-1.3.4
>
> Ive installed SSLeay, Apache and going thru the installation process of
> mod_ssl. Configuring with Apache (./configure
In the INSTALL file for the 990520 snapshot
the configuration directives for openssl gives
the -DNO_IDEA switch.
The 990520 snapshot only works with openssl 0.9.3.0
and higher. When configuring the openssl 0.9.3.0 the
-DNO_IDEA option is removed.
Please update the INSTALL file to the release o
Hi, I've already installed modssl with tar.gz package, but,
some others modules cause problemes. Now, I have to install
mod_ssl on a rpm_based apache. I can't uninstall everything
and redo all from the beginning. I must install it from
rpm.
I have 2 questions, the first one, just to be sure.
d
Hello
I've followed all the steps for installation of mod_ssl
and mod_ssl enabled httpd was created. It is listening on port 443. The
problem is with server certificate. While generating self signed certificate,
as per the procedure given in faq, everything went ok except in the end
o
> put the same in openssl\bin directory, thinking it is a typo. I
> proceeded to step 4 where I need to run the configure.bat file. But it
> is giving error "Can't execute configure.bat". I don't know what to do.
> Can anybody help me to successfully install it.
Are you possibly using Win95 or Win
-Original Message-
From: P.K.B. Hari Gopal <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Friday, December 10, 1999 6:57 AM
Subject: Installation Problem..
>Hello,
>I have installed openssl-0.9.4 without any errors on WindowNT system.
>D
On Fri, Dec 10, 1999, P.K.B. Hari Gopal wrote:
> I have installed openssl-0.9.4 without any errors on WindowNT system.
> During my installation process of mod_ssl-2.4.9-1.3.9 it asked to copy
> "ssleay.exe" from open32dll directory of openssl-0.9.4. But I could not
> find
That's the way I would do it, compile it. But I thought I heard someone posting a
message on how to make the rpm's work. Compiling it yourself is pretty easy and you
might learn some things along the way. But some people like to only install rpms, I am
not one of those people.
Keith Vance
West
I have already got an apache web-server running and now I am
unable to install modssl and without the apache source tree. Can any one help ?
__
Apache Interface to OpenSSL (mod_ssl) www.modssl.org
User
Running RHL 6.1
I'm probably blind and missing the paragraph completely in the
documentation...
Is there a particular directory where one puts the MOD_SSL and OPEN_SSL
tars for decompressing and running 'makes'.
Thanks
JANLU (Just Another New Linux User)
_
Hi All
I installed the ssl software and recompiled apache everything looks good
(no error messages or error log problems). I cannot however access the
secure server. I have setup a virtual host in httpd.conf named
secure.localhost I can access this via http://secure.localhost but not
https://secu
ck Root [mailto:[EMAIL PROTECTED]
Sent: Friday, March 14, 2003 3:46 PM
To: [EMAIL PROTECTED]
Subject: Installation Woes
Hi folks.. I'm a newbie here, installing Apache and OpenSSL and mod_ssl
from source on my RedHat 7.3 (I uninstalled the RPMS)
Call me stupid, but I must be missi
Have you tried this?
http://www.tldp.org/HOWTO/Apache-Compile-HOWTO/
cam
___
No banners. No pop-ups. No kidding.
Introducing My Way - http://www.myway.com
__
Apache Interface to OpenS
the RPMS)Call me stupid, but I must be missing
something...The installation instructions are pretty straightforward but
I have one major problem - the httpd.conf doesn't include ANY ssl
configuration options after it's installed.So of course, SSL doesn't
work.The instructions see
with my apache 1.3.27 source distribution.
cam wrote:
> Have you tried this?
>
> http://www.tldp.org/HOWTO/Apache-Compile-HOWTO/
Cam,
I don't have any problem compiling apache with mod_ssl. I don't know
how to configure it in the httpd.conf because after installation, SSL is
e changes you seek.
Thanks,
Ron DuFresne
>
> cam wrote:
> > Have you tried this?
> >
> > http://www.tldp.org/HOWTO/Apache-Compile-HOWTO/
>
> Cam,
>
> I don't have any problem compiling apache with mod_ssl. I don't know
> how to config
build, if mod_ssl
isn't there you'll either have to rebuild with mod_ssl or load the module
dynamically.
-Original Message-
From: Rick Root [mailto:[EMAIL PROTECTED]
Sent: Friday, March 14, 2003 3:46 PM
To: [EMAIL PROTECTED]
Subject: Installation Woes
Hi folks.. I'm a new
Check to make sure that the global SSL setup has these directives
SSLVerifyClient 0
SSLVerifyDepth 10
Also make sure that you can ping www.verisign.com.
HTH,
Victor
Myint Myint Moe wrote:
> Hi,
>
> I have installed verisign certificate on our web server by using two
> direcitve lines
> (SSLCe
Sorry, disregard that. I thought I was in the Apache-SSL forum. I don't think
Mod-SSL requires these directives. Never mind.
Victor wrote:
> Check to make sure that the global SSL setup has these directives
>
> SSLVerifyClient 0
> SSLVerifyDepth 10
>
> Also make sure that you can ping www.verisi
On Tue, Sep 12, 2000, Marcos Sanchez wrote:
> Two questions about installing mod_ssl in our Apache web server under
> SuSE Linux 6.3 :
>
> 1) What is better, linking mod_ssl as a DSO or as a Module?
Neither one. Whether you build mod_ssl+OpenSSL as a DSO or as a static module
depend
On Tue, May 15, 2001 at 05:04:51PM -0500, Hu, Meng P (Meng Pei) wrote:
>
> "mod_ssl: Init: Failed to generate temporary 512 bit RSA private key
> (OpenSSL library error follows).
> OpenSSL: error:24062064:random number generator:SSLEAY_RAND_BYTES:PRNBG not
> seeded.
> OpenSSL:error:04069003:rsa r
gt; Reply To: [EMAIL PROTECTED]
> Sent: Tuesday, May 15, 2001 5:44 PM
> To: [EMAIL PROTECTED]
> Subject: Re: mod-ssl Installation
>
> On Tue, May 15, 2001 at 05:04:51PM -0500, Hu, Meng P (Meng Pei) wrote:
> >
> > "mod_ssl: Init: Failed to gen
hello everyone,
i want the apache server to serve listen only on port 443(i.e https) and not
on port 80(www request) i.e apache server should serve only ssl requests by not acting
as a virtual host.
i followed the instruction given in
http://www.modssl.org/example/
i have installed wi
hi,
and this is the problem, i want to php, and ssl running on an apache
server this is the way i am attempting to intall:
1: install openssl
-untar the openssl tar ball
-move into source directory
- type ./config ; make ; make install
2: configure apache
Anand Nagarhalli wrote:
>
> Hello,
> I want to test a small program through SSL on Apache(1.3.14) on linux. I am
> trying to build/install mod_ssl with Apache but in vain. Is there site from
> where I can just get the installable of mod_ssl/openssl/mm/apache(for
> 1.3.14) without bothering to bui
t;To: [EMAIL PROTECTED]
->Subject: build/installation prb
->
->
->Hello,
->I want to test a small program through SSL on Apache(1.3.14)
->on linux. I am
->trying to build/install mod_ssl with Apache but in vain. Is
->there site from
->where I can just get the installable o
ww.log.net
- Original Message -
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, November 01, 2001 2:56 AM
Subject: Installation problems (httpd.conf)
> Hi,
> I have installed the W32 port of Apache 1.3.22 and Mod SSL 2.8.5.
>
> My problem is that "
Full_Name: Greg Greenaae
Version: 2.1.7
OS: Linux RedHAt 5.2
Submission from: (NULL) (207.181.222.40)
I've compiled and installed rsaref, SSLeay and mod_ssl. Compiled in the mod
into Apache 1.3.4 with php3.
Followed the INSTALL instructions to the letter. Every compiled and installed
without
e
Full_Name: Eric Boulogne
Version: 2.1.8-1.3.4
OS: AIX 4.2
Submission from: felix.adpcl.com (194.98.137.100)
As your suggestion in PR#91, I have downloaded mod_ssl-2.1.8-1.3.4.
The following problem occurs when I try to install it.
Can you help me please. Thanks.
Configuring mod_ssl/2.1.8 for Ap
On Fri, May 21, 1999, [EMAIL PROTECTED] wrote:
> In the INSTALL file for the 990520 snapshot
> the configuration directives for openssl gives
> the -DNO_IDEA switch.
>
> The 990520 snapshot only works with openssl 0.9.3.0
> and higher. When configuring the openssl 0.9.3.0 the
> -DNO_IDEA option
Hy there,
I recently installed Apache 1.3.6, mod_ssl 2.3.1 and OpenSSL 0.9.3 under Windows NT
Server 4.0 with SP4. Well... to be true, I had IIS installed, but it was ugly slow. So
I replaced it with Apache. Right now everything works fine, but the mod_ssl patch
doesn`t patch the httpd.conf-d
On Mon, Jul 12, 1999, [EMAIL PROTECTED] wrote:
> Hi, I've already installed modssl with tar.gz package, but,
> some others modules cause problemes. Now, I have to install
> mod_ssl on a rpm_based apache. I can't uninstall everything
> and redo all from the beginning. I must install it from
>
12-Jul-99 19:25 you wrote:
> Hi, I've already installed modssl with tar.gz package, but,
> some others modules cause problemes. Now, I have to install
> mod_ssl on a rpm_based apache.
It's not possible. End of story.
> I can't uninstall everything and redo all from the beginning.
> I must instal
On Mon, 12 Jul 1999, you wrote:
> 12-Jul-99 19:25 you wrote:
> > Hi, I've already installed modssl with tar.gz package, but,
> > some others modules cause problemes. Now, I have to install
> > mod_ssl on a rpm_based apache.
>
> It's not possible. End of story.
>
Actually, there are mod_ssl-RPM'
Hi !
> > And, second,.. the most important. how to fix this error
> > message.
> > Cannot load /usr/lib/apache/libssl.so into server:
> > /usr/lib/apache/libssl.so: undefined symbol: ap_global_ctx
> > I get this message when a restart the apache server.
>
> And you should :-) You need EAPI in your
ring for Apache, Version 1.3.9
+ using installation path layout: Apache (config.layout)
Creating Makefile
Creating Configuration.apaci in src
+ enabling mod_so for DSO support
Creating Makefile in src
+ configured for Solaris 270 platform
+ setting C compiler to gcc
+ setting C pre-proc
The problem was solved by having different description for certifying auth.
Got it from one of the mails in the list. Its working!
Thanks
NKN
Original Message Follows
From: Naresh Narang <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Installat
go to www.apache.org and download the apache source tree? ;-)
P Srinivasan wrote:
>
> I have already got an apache web-server running and now I am
> unable to install modssl and without the apache source tree. Can any one help ?
>
> __
build the apache source tree according to the instructions found
at www.modssl.org.
everything you need to know is there.
cliff rayman
genwax.com
P Srinivasan wrote:
> I have already got an apache web-server running and now I am
> unable to install modssl and without the apache source
thing I'd add to it would be a note for mod_perl'ers using
Apache::DBI, adding this to the "mod_perl" sample installation:
--- INSTALL Fri Mar 3 18:38:07 2000
+++ INSTALL.new Fri Mar 3 18:39:10 2000
@@ -521,7 +521,9 @@
APACHE_SRC=../apache_1.3.x/src \
the mod_ssl tarball is very easy to follow, even
>for mod_perl, php, etc..
>
>The only thing I'd add to it would be a note for mod_perl'ers using
>Apache::DBI, adding this to the "mod_perl" sample installation:
>
>--- INSTALL Fri Mar 3 18:
ast 4 are the actual directories. (nevermind the version
> >#'s)
> >
> >The 'INSTALL' doc in the mod_ssl tarball is very easy to follow, even
> >for mod_perl, php, etc..
> >
> >The only thing I'd add to it would be a note for m
You most likely forgot the Listen 443 parameter in httpd.conf, and the
SSLEngine on in the virtual host.
---
Mat Butler, Winged Wolf <[EMAIL PROTECTED]>
SPASTIC Web Engineer SPASTIC Server Administrator
Begin FurryCode v1.3
FCWw5amrsw A- C+ D H+++ M+
; Subject: Re: verisign certificate installation
>
> Hi,
>
> Thanks for your reply. In Apache-modssl, httpd.conf also have the
> following directive lines and default is making comment that lines.
>
> # Client Authentication (Type):
> # Client certificate verificat
; Subject: Re: verisign certificate installation
>
> Hi,
>
> Thanks for your reply. In Apache-modssl, httpd.conf also have the
> following directive lines and default is making comment that lines.
>
> # Client Authentication (Type):
> # Client certificate verificat
Hi,Sir:
Could some body help me?
When I install the mod-ssl2.6.6-1.3.12 and apche1.3.12 on windows 2000, I
can't run https request, I did the configure file just as the document
suggested, but some times I even can't start apache, I installed them on my
local machine.
Could some body email me the
Hi,
i tried the rpm version but am having conflict with a file between the rpms..
so i switch back to manual installation (compile)
but i'm getting this error : during compilation of apache 1.3.12
#./configure --prefix=/usr/local/IMVI/a
list,
I'm getting an error while the "doing sanity check on compiler and options"
is occuring during the configure.
The error basically says that the test compilation with the Makefile
configuration failed and that most because my compiler
is not ansi. Has anyone else seen this? It mentions gcc c
I followed the instructions in the INSTALL file and I got a lot of
undefined symbols when I take step 5. (No apply the mod_ssl source...)
and a)
...
$ cd ..
$ cd apache_1.3.19
$ make
cc -DSOLARIS2=280 -DMOD_SSL=208103 -DEAPI -DUSE_EXPAT -I./lib/expat-lite
-DNO_D
L_NEEDED `./apaci` -L/expor
On Tue, Jul 17, 2001 at 02:09:10PM +0500, Saquib Farooq wrote:
[SNIP]
> -DUSE_EXPAT -I../../lib/expat-lite -DAPACHE_SSL `../../apaci` -fpic
> -DSHARED_MODULE mod_auth_dbm.c && mv mod_auth_dbm.o mod_auth_dbm.lo
> mod_auth_dbm.c:85:22: db1/ndbm.h: No such file or directory
> make[4]: *** [mod_aut
Hello,
I installed Apache1.3.22 with mod_ssl 2.8.5 in Sol8. But strangely, i'm
not able to start the webserver. In the log its says "[alert] (22)Invalid
argument: setgid: unable to set group id to Group 4294967295 "
Can anyone help me.
Pl.its immediate requirement.
Thanks & Regards
Ravi
___
On Mon, Jan 25, 1999, [EMAIL PROTECTED] wrote:
> Full_Name: Eric Boulogne
> Version: 2.1.8-1.3.4
> OS: AIX 4.2
> Submission from: felix.adpcl.com (194.98.137.100)
>
> As your suggestion in PR#91, I have downloaded mod_ssl-2.1.8-1.3.4.
> The following problem occurs when I try to install it.
> Ca
>Oh oh oh, AIX is really the most horrible Unix derivative...
It is not horrible, it is quite nice :-). The C compiler notices quite
a few bad habits, and it is really picky about ANSI-C. Wait until you
get the first bug reports from folks turning on type safe linkage for C
programs :-). If it o
On Mon, Jan 25, 1999, Jens-Uwe Mager wrote:
> >Oh oh oh, AIX is really the most horrible Unix derivative...
>
> It is not horrible, it is quite nice :-). The C compiler notices quite
> a few bad habits, and it is really picky about ANSI-C. Wait until you
> get the first bug reports from folks tu
>You're certainly right. But since AIX made such a lot of problems for the DSO
>support in Apache (you know, every platforms was mostly friendly, except AIX)
>I really hate this flavor of Unix ;-)
The way DSO's are build under AIX appears to be quite strange, but if
you look at it you will see t
On Mon, Jan 25, 1999, Jens-Uwe Mager wrote:
> >You're certainly right. But since AIX made such a lot of problems for the DSO
> >support in Apache (you know, every platforms was mostly friendly, except AIX)
> >I really hate this flavor of Unix ;-)
>
> The way DSO's are build under AIX appears to
>So, let us give credit to IBM for supporting those explicit export lists, but
>let us dislike IBM for the fact that they _force_ us to use it even for small
>projects like Apache
Ok, I agree on that. Although with all the extensibility through modules
I am not sure that Apache is a small pr
mmm... there are no real reasons. I just never did this because this way I
had to always sync the two config files and because Win32 isn't an officially
supported platform (and also has no automatic installation process for the SSL
part) I always convinced myself ;) that I can avoid this syncing
1 - 100 of 163 matches
Mail list logo