On Sat, Jan 01, 2005 at 03:45:22PM -0800, David Highley wrote:
So how do we work our way out of this mess? If I try and use apt-get it
suggests using the -f flag and then comes up with a list of half the
rpms on the system to remove.
Whenever apt suggests -f (or at least 99.99% of the cases)
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I think you have to modify the commnad line to retrieve the tv list in
the setup (mythsetup).
there is a line that read mythfilldatabase, modify it with the proper
command (it's something like mythfilldatabase --grab-options -N
DAYS-YOU-WANT.
Check
Dan wolf wrote:
Ok did that, for set|grep I get:
MYKERNEL=2.6.9-1.667smp #1 SMP Tue Nov 2 14:59:52 EST
2004 i686 i686 i386 GNU?Linux
_=MYKERNEL
But it still cant find the nvidia package
You're not entering it right. You've assigned the value of MYKERNEL to
_, not MYKERNEL the value of `uname
The syntax is
mythfilldatabase --graboptions --days 14
The default options are
--days 7 --config-file /root/.mythtv/digital.xmltv --output
/tmp/mythYqnWCi
and the stuff I add is appended at the end.
I wonder - is there syntax to add these options to the config file?
BTW,
On Sat, 1 Jan 2005, Dan wolf wrote:
Ok did that, for set|grep I get:
MYKERNEL=2.6.9-1.667smp #1 SMP Tue Nov 2 14:59:52 EST
2004 i686 i686 i386 GNU?Linux
_=MYKERNEL
It seems you have a reading or typing problem.
uname -a IS NOT uname -r
[EMAIL PROTECTED] ~]$ MYNAME=`uname -a`
[EMAIL
Many thanks for the settings, I'll give that a go...
Regards,
Garry
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Im using a 800x600 display out the back of nvidia card, its a gf2mx.
Connected to my tv with s-video.
using opengl sync with the bob de interlacer. I have set the xv colour
from blue to black. The osd shivers abit but apart from that people
have asked how I made my tv so sharp compared to
Ben de Luca wrote:
Im using a 800x600 display out the back of nvidia card, its a gf2mx.
Connected to my tv with s-video.
using opengl sync with the bob de interlacer. I have set the xv colour
from blue to black. The osd shivers abit but apart from that people
have asked how I made my tv so
You know, I have a similar issue. I have apt--0.5.15cnc6-53.2.rh9.at
installed.
I used rpm to install kvim with --nodeps because it depends on vim, and
vim is not an installable package according to apt-get. Therefore there
was no way for me to satisfy the dependency. Never mind that I do
I found an old webcam (D-Link DSB-C100 CPiA chipset), but I this message
when I fire-up mythphone
Webcam does not support YUV420P, YUV422P, or RGB24 modes; these are the
ony ones currently supported. Closing webcam.
There are lots of different webcam formats and I added support in for each
On Sun, 2 Jan 2005, [UTF-8] Trond Eivind Glomsrød wrote:
Dan wolf wrote:
Ok did that, for set|grep I get:
MYKERNEL=2.6.9-1.667smp #1 SMP Tue Nov 2 14:59:52 EST
2004 i686 i686 i386 GNU?Linux
_=MYKERNEL
You're not entering it right. You've assigned the value of MYKERNEL to
_, not
Am Samstag, den 01.01.2005, 19:44 -0600 schrieb Jonathan Moore:
No I don't see any mention of it, but it is clearly checked in the settings
and shows it
being assigned to /dev/video16. I have tried unchecking and restarting and
checking
again. I have rerun make install, and I have
On 02/01/2005, at 10:29 PM, Rob Hillis wrote:
Ben de Luca wrote:
Im using a 800x600 display out the back of nvidia card, its a gf2mx.
Connected to my tv with s-video.
using opengl sync with the bob de interlacer. I have set the xv
colour from blue to black. The osd shivers abit but apart from
Mythphone runs as several threads. The audio and RTP is one thread, the SIP
stack is one thread, and the RTP for video is one thread. The H.263 and
displaying of webcams runs in the main GUI thread currently though I do want
to change this. This means when H.263 locks up, so does the GUI.
I test
OK. I'm stuck. All was going well using Jarod's wonderful guide
until I got to installing the Mythtv suite. The output below is after
multiple trys at installing the suite:
[EMAIL PROTECTED] mythtv]# apt-get install mythtv-suite
Reading Package Lists... Done
Building Dependency Tree... Done
-Original Message-
From: [EMAIL PROTECTED] [mailto:mythtv-users-
[EMAIL PROTECTED] On Behalf Of Ben de Luca
Sent: Sunday, 2 January 2005 10:45 PM
To: Discussion about mythtv
Subject: Re: [mythtv-users] Driving Australian TVs
On 02/01/2005, at 10:29 PM, Rob Hillis wrote:
Hello,
Perhaps someone out there who has one can let me know:
Is the Power Supply fan loud?
No.
Are the Case fans loud?
No.
Are you happy with it?
Yes.
Regards,
Cecil
___
mythtv-users mailing list
mythtv-users@mythtv.org
For those of you who have struggled with problems with some of the older
Nvidia cards and the 6629 drivers, Let me (hopefully) save you some time.
http://ngc891.blogdns.net/index.php?2004/09/21/3-patched-nvidia-drivers
After I tried every other fix on the net... this worked like a charm...
X
Since we're discussing hardware choices, I'm wondering what y'all
think about using one of the rumored new headless Mac systems? I
discuss this a bit on my blog (http://a1.blogspot.com/), but that's
just me spouting off :-)
I figure there might be some folks on this list who have done MythTV
on
On Sun, Jan 02, 2005 at 04:30:13AM -0700, Gerald Schepens wrote:
You know, I have a similar issue. I have apt--0.5.15cnc6-53.2.rh9.at
installed.
I used rpm to install kvim with --nodeps because it depends on vim, and
vim is not an installable package according to apt-get. Therefore there
I've setup Mythtv on FC1 and watch TV on my television. When i change the
volume the volumebar moves, but the output stays the same.
Is it possible to change the volume output through the televisionspeakers by
the remote control.
For reference, i use the PVR350 and an I810 soundcard.
Another
I'm using the latest mythtv rpms from atrpms.net on FC3 and the mythvideo
imdb perl script that grabs movie info simply isn't working. It doesn't
return any error messages, but never finds the movie, even on simply
searches that I know are spelt correctly, or just one word. Does anyone
else have
Manually installing mplayer-fonts doesn't seem to work either:
[EMAIL PROTECTED] mythtv]# rpm -Uvh mplayer-fonts-1.0-6.at.noarch.rpm
warning: mplayer-fonts-1.0-6.at.noarch.rpm: V3 DSA signature: NOKEY,
key ID 66534c2b
Preparing...### [100%]
[EMAIL PROTECTED] wrote:
I've setup Mythtv on FC1 and watch TV on my television. When i change the
volume the volumebar moves, but the output stays the same.
Is it possible to change the volume output through the televisionspeakers by
the remote control.
For reference, i use the PVR350 and an I810
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello
So far I have everything working in my mythtvbox and I am very happy
about it.
Thanks all of you that help me get that.
But, I own PVR-350 and I am not using the tv out of that card, I am
using my nvidia tv output.
Despite I get a good wuality
On Fri, 2004-12-31 at 20:14, Michael T. Dean wrote:
On 12/31/2004 12:54 PM, Bodo Bauer wrote:
mail.com [EMAIL PROTECTED] said:
Probably along the right line.
I had a similar performance problem that was due to the system using
software based sound
rather that the hardware based
Axel Thimm wrote:
On Sat, Jan 01, 2005 at 03:45:22PM -0800, David Highley wrote:
So how do we work our way out of this mess? If I try and use apt-get it
suggests using the -f flag and then comes up with a list of half the
rpms on the system to remove.
Whenever apt suggests -f (or at
I have found the same, latest CVS, Jarod's guide etc.
Paul
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Daniel Agar
Sent: 02 January 2005 16:02
To: mythtv-users@mythtv.org
Subject: [mythtv-users] mythvideo imdb
I'm using the latest mythtv rpms from
Same with ubuntu hoary .debs for mythtv. simple things like Gremlins
aren't even coming up. probably another change in imdb to prevent
people like us brutally ripping content off their site.
___
mythtv-users mailing list
mythtv-users@mythtv.org
I have reinstalled my mythtv system (Pundit-R/Hauppauge 350) with Fedora Core2.
I'm unable to do a apt-get dist-upgrade because of some conflicts. I found
some postings of the same error but no solutions. I did a fresh install two
months ago and apt-get dist-upgrade didn't gave me any troubles
Hi,
Is it possible to use a PVR-350 in X to output to TV and, at the same
time, use a regular video card (an Nvidia FX 5200 to be exact) to output
to monitor? I'd like to use both at the same time... would be really
useful to me. Configuring myth using the TV can't be good for the eyes...
Quoting Torsten Schenkel [EMAIL PROTECTED]:
Am Samstag, den 01.01.2005, 19:44 -0600 schrieb Jonathan Moore:
No I don't see any mention of it, but it is clearly checked in the settings
and shows it
being assigned to /dev/video16. I have tried unchecking and restarting and
checking
My Data Direct subscription from zap2it labs expires on January 26th. I
can't find anything about renewal on their website. Does anyone out there
know how I renew this? Does it happen automatically?
Thanks,
--
Harald Koch [EMAIL PROTECTED]
Grandpa Charnock's Law:
You never really learn
Yes is the short answer. There are several ways
1) Run dual screen
Pros - relatively simple to make work
Cons - The 350's X display is tied to the desktop one so logging out
restarts the x server for the 350 as well as the desktop. The desktop mouse
can move off the side and onto
On Sun, Jan 02, 2005 at 01:46:37PM -0500, Harald Koch wrote:
My Data Direct subscription from zap2it labs expires on January 26th. I
can't find anything about renewal on their website. Does anyone out there
know how I renew this? Does it happen automatically?
You will eventually get an email
My Data Direct subscription from zap2it labs expires on January 26th. I
can't find anything about renewal on their website. Does anyone out there
know how I renew this? Does it happen automatically?
A week or so before the expiration, they should send you an email notice
which has a link to a
I've installed the ALSA drivers, but i believe it uses the ALSA/OSS
emulation. I used Jarod's guide with 0.16 release verion.
Can i use the cvs over my installed version, or do i've to wait until a new
release
Patrick
-Oorspronkelijk bericht-
Van: [EMAIL PROTECTED]
[mailto:[EMAIL
At 11:01 AM -0500 1/2/05, Daniel Agar wrote:
I'm using the latest mythtv rpms from atrpms.net on FC3 and the mythvideo
imdb perl script that grabs movie info simply isn't working. It doesn't
return any error messages, but never finds the movie, even on simply
searches that I know are spelt
My Data Direct subscription from zap2it labs expires on January 26th. I
can't find anything about renewal on their website. Does anyone out there
know how I renew this? Does it happen automatically?
You should get an email from them with instructions on what to do.
basically, you log into your
Sorry if this duplicates an older issue, but googling turned up no
information. I have been reading the digest for a couple of weeks and have
seen no pertinent discussion.
I have just built a MythTv box using Jarod Wilson's FC3 guide.
My system is:
ASUS A7V600-X MB with an Athlon XP 2500+ cpu
What about the distros that can use either, such as gentoo? Gentoo
uses modules.conf; is modprobe.conf not compatiable with a 2.4 kernel,
while modules.conf is with a 2.6?
The files look so similar that I doubt it would matter very much
either way. If indeed both kernels would work with both,
John,
What I want is both screens to display the same contents... I don't want
to have one virtual area with the TV being at the right or bottom of the
monitor.
The thing is, with the nVidia card (which has TV out too, even though I
believe the PVR-350 has better quality) it works this way
Thank you all for the quick responses!
--
Harald Koch [EMAIL PROTECTED]
What if the Hokey Pokey really is what it's all about?
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Indeed, using xine would be the easiest solution. If you have some
reason to stick with mplayer, take a look at man mplayer, as there is
a way to pass it chapters on the commandline (still not usefull for
within myth.)
Taking the bigest chapter would not help on multi-feature disks
(commonly a
I just did a fresh install of FC2 this morning and came up with the
same errors does anyone have a solution or should a bug report be
submitted
The following packages have been kept back
rpm rpm-build rpm-devel rpm-python
176 upgraded, 19 newly installed, 1 replaced, 1 removed and 4 not
Carlos Fernandez Sanz wrote:
Hi,
Is it possible to use a PVR-350 in X to output to TV and, at the same
time, use a regular video card (an Nvidia FX 5200 to be exact) to
output to monitor? I'd like to use both at the same time... would be
really useful to me. Configuring myth using the TV can't
Max Waterman wrote:
I'm having a problem creating my raid device.
My first raid device is /dev/md0 and that works fine; but /dev/md1
doesn't exist.
I can create it manually with :
# mknod /dev/md1 b 9 1
# mknod /dev/md2 b 9 2
# mknod /dev/md3 b 9 3
... etc
and reassemble and mount again, and all
Hi,
Thought about this, but this doesn't output video, plus I'd like my
setup not to assume that there's always a network available, or a
monitor, etc... so if I could make it work with a TV or a monitor
(whatever is available), that would be ideal.
Thanks.
Asciimonster wrote:
Carlos Fernandez
Not sure how to display the same content to 2 different cards in one
session. The nvidia driver is talking to 1 card so its easier.
However why do that. You can always just run up a new mythfrontend to do the
configuration stuff you need talking to the nvidia xserver when you need to
do something
On Sun, 2 Jan 2005 13:46:37 -0500, Harald Koch [EMAIL PROTECTED] wrote:
My Data Direct subscription from zap2it labs expires on January 26th. I
can't find anything about renewal on their website. Does anyone out there
know how I renew this? Does it happen automatically?
Just to add to the
I don't believe you can use a USB-Serial converter with LIRC (I'm in
the same boat as you.) From what I can tell, LIRC has a seperate
driver that replaces the kernel driver for the port it runs on and
that driver, AFAICT doesn't support usb adapters.
Now the question I have is if this is true
A little off topic yes, opinions appreciated on this. Trying to decide
which spare box to use.
I am going to build another Myth Backend/frontend box. ( It will also
be a general purpose box surfing / email etc )
I have 2 boxes here to choose from and want to know which would be best
I have FOUR left, anyone who wants one, email me (not the list) and
I'll give you one.
--
-Courtland Jones
[EMAIL PROTECTED]
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
mail-pdebrabander.nl wrote:
I've installed the ALSA drivers, but i believe it uses the ALSA/OSS
emulation. I used Jarod's guide with 0.16 release verion.
Can i use the cvs over my installed version, or do i've to wait until a new
release
You can just use CVS over the installed, make sure that
I used to have a dual PII and it seemed faster than this crappy
celeron I had. Either could run MythTV, why not just try both?
On Sun, 2 Jan 2005 14:04:00 -0700, mark [EMAIL PROTECTED] wrote:
A little off topic yes, opinions appreciated on this. Trying to decide
which spare box to use.
I think ive heard of it wokring on Yellow Dog Linux (Linux for PPC).
However, you would be better off getting a system you can change. I
have never liked macs because I a guy who wants to be able to do
ANYTHING with my machine. WIth all the strange hardware on apples, it
is not easy to put the
Nick Morrott wrote:
Hi,
In response to my problem of needing either a combined serial port based IR
receiver and transmitter, or using two serial based devices simultaneously,
I was wondering if any other users have had the same problem and have had
success using one serial port and converting a
On Sun, Jan 02, 2005 at 11:57:53AM -0700, Anthony Veale wrote:
My Data Direct subscription from zap2it labs expires on January 26th. I
can't find anything about renewal on their website. Does anyone out there
know how I renew this? Does it happen automatically?
A week or so before the
I have a PCI Nvidia FX 5700 possibly for sale. You interested?
On Sun, 02 Jan 2005 02:12:21 -0500, Christopher Houdeshell
[EMAIL PROTECTED] wrote:
Hello,
I am wanting to try out MythTV. I currently have an old ATI All in
Wonder VE card that won't work with MythTV. I am in need of a place
Please stop this. Isaac has already mentioned several times that he
will not tolerate this spamming. And I, for one, would not like all
@gmail.com addresses blocked from this list.
On Jan 2, 2005, at 3:11 PM, Courtland Jones wrote:
I have FOUR left, anyone who wants one, email me (not the
On Sat, 1 Jan 2005, d gleba wrote:
David Bosiljevac wrote:
Alas, along with my backend crashing, the mysterious freezing problem has
come back.
This is getting so frustrating I'm tempted to switch to a Windows based PVR!
(gasp!)
Have you tried knoppmyth? Maybe it will show you a
Has anybody else encountered problems with nuvexport?
Specifically, I run nuvexport-dvd (I have tried svcd too) and pick the show I
wish to export. It runs the transcode and produces an mpg file but when I try
and play it in mplayer the video is hideously corrupted with green bands
throughout. I
Simple question - just soes I know that I am not wasting my time.
Have people got myth tv running via S-Video OUT on PVR-350 - Completely - that
is to say - mythtv menus, playing video (mythvideo) etc
I have spent a few weeks now - and have managed to get the framebuffer
working, and
I'm curious what people have done about memory optimization in their
myth boxes. I'm running a combination FE/BE on an EPIA M1 with
512MB of RAM, so keeping things clean is rather critical to keeping it
all usable. That said, I am running Azureus on this machine as well
which can be a huge
Quoting [EMAIL PROTECTED]:
Simple question - just soes I know that I am not wasting my time.
Have people got myth tv running via S-Video OUT on PVR-350 - Completely -
that
is to say - mythtv menus, playing video (mythvideo) etc
I have spent a few weeks now - and have managed to get the
On Sunday 02 Jan 2005 23:29, Jon Reynolds wrote:
Quoting [EMAIL PROTECTED]:
Simple question - just soes I know that I am not wasting my time.
Have people got myth tv running via S-Video OUT on PVR-350 - Completely -
that
is to say - mythtv menus, playing video (mythvideo) etc
I have
I hate to admit it, but I have no idea. I don't have a clue how to check CPU
usage or ram usage. I'm very new to Linux and I'm using Fedora core 2
following Jarod's guide. If I knew how to check I might be able to chime in.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL
On Sun, 2 Jan 2005 17:58:56 -0600, Byron Williams
[EMAIL PROTECTED] wrote:
I hate to admit it, but I have no idea. I don't have a clue how to check CPU
usage or ram usage. I'm very new to Linux and I'm using Fedora core 2
following Jarod's guide. If I knew how to check I might be able to chime
I tried to install mythtv-0.16 (from source), but I get a segfault when
calling the setup program. I answer the first two questions with yes, then
the screen flashes (tries to open some window I think), then the segfault.
If I call mythfrontend directly I also get a segfault and even with -v all
As many people know, the Daily Show runs several times a day, all
repeating the episode that airs earlier at 11pm the day before. The
listing data is often not filled it, often it is just a stock line
about A humorous take on today's news stories.
Thus Myth (and Tivo and others) don't know how
On Sun, 2005-01-02 at 13:11 -0800, Courtland Jones wrote:
I have FOUR left, anyone who wants one, email me (not the list) and
I'll give you one.
Are gmail invites this years new spam? :-) I alread block yahoo and
hotmail accounts... perhaps I should add gmail to the list
--
-goc-
I myself would lean toward the single processor. I
however have never put together a dual processor
system. If you are running a pvr card like that
though either one would work I would think. Send the
pc you don't decide to use to me and I'll let you know
if it would have worked. :)
--- mark
When installing mythtv-suite for x86_64/FC3, two dependencies are unmet:
mythmusic and mythphone
Any chances of getting them added?
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
I also experience this issue from time to time. Running version
0.16.20040906-1, although I'm betting it more of a sound system issue
then a Myth issue.
On Sun, 2 Jan 2005 16:23:04 -0800, Tim Berger [EMAIL PROTECTED] wrote:
Greetings.
Pardon if this is FAQ, but I could not find it anywhere.
On Mon, 03 Jan 2005 11:56:44 +1100, Geoff O'Callaghan
[EMAIL PROTECTED] wrote:
On Sun, 2005-01-02 at 13:11 -0800, Courtland Jones wrote:
I have FOUR left, anyone who wants one, email me (not the list) and
I'll give you one.
Are gmail invites this years new spam? :-) I alread block yahoo
I have my myth setup almost as I like now. One thing that is
irritating is that it takes several seconds to navigate the main
screens. I mean going to Setup takes about 4-5 seconds (at least), and
then there's another couple of levels of UI to go through.
Is this expected, or have I something in
On Sun, 2 Jan 2005 23:25:33 +0100 (CET), Hugo van der Kooij
[EMAIL PROTECTED] wrote:
A significant problem with KnoppMyth is their use of LILO. GRUB is not
that big and it is not such a major pain to troubleshoot. (Try to explain
someone the MUST run LILO as soon as their kernel is touched to
Hi Jonathan,
Thanks for your detailed response. It is very helpful :).
Antec Overture case -- Should look good in the living room and is
supposed to be quiet
This case passed the wife test. There were a few others she liked even better, but
she would be willing to have one of these in the
On 1/1/2005 at 3:03 PM Julian Edwards wrote:
I tried your interlaced PAL modeline on my TV and it produces a fine
picture but I still get my problem with the flashing input identifier.
When using the interlaced component output from the DVD player it's not
there so I think I've got a problem with
Thanks Doug!
Well - I did the upgrade and I would say the 15sec record issue went away. So
this is good!
The ATSC watching seems to have taken a few steps back IMHO. I've been
watching ATSC content for about 4-5 months now and I think the current CVS tree
has some things broken.
For one -
I don't think this is specific to the Epia Unichrome drivers. I've
noticed sluggish performance running out of my PVR-350 for a while
now.
On Mon, 3 Jan 2005 01:53:59 +, Andrew Wilson [EMAIL PROTECTED] wrote:
I have my myth setup almost as I like now. One thing that is
irritating is that
Stroller wrote:
On Jan 2, 2005, at 1:32 am, Snoop Baron wrote:
Neatgear 54Mbps wireless card -- streaming video to other PCs?
Which one? Are you happy it's supported under Lunix? I did a fair bit
of research before I bought my wireless card, and decided I wanted one
supported by the Prism54
Stroller wrote:
On Jan 2, 2005, at 1:32 am, Snoop Baron wrote:
Neatgear 54Mbps wireless card -- streaming video to other PCs?
Which one? Are you happy it's supported under Lunix? I did a fair bit
of research before I bought my wireless card, and decided I wanted one
supported by the Prism54
A suggestion/request which should satisfy all parties. If you have
invites you'd like to hand out, please put the invite in your
signature, telling them to contact you off-list.
That way people will approach you as a result of your on-topic
interactions with the list, not your gamming posts. (of
Once upon a time Sunday 02 January 2005 8:26 pm, Snoop Baron wrote:
Stroller wrote:
On Jan 2, 2005, at 1:32 am, Snoop Baron wrote:
Neatgear 54Mbps wireless card -- streaming video to other PCs?
Which one? Are you happy it's supported under Lunix? I did a fair bit
of research before I
I've got PVR-250 MPEG-2 files that I'd like to burn to DVD without
re-transcoding.
...
Any ideas?
Admittedly, I'm no expert on Myth (having not installed it yet, and not
even used my PVR250 at all yet) but your problem sounds exactly like
what would happen if the audio was the wrong sample rate.
I get the same thing. It seems to happen when I am repeatedly skipping
forward (rapidly). I was guessing it was a myth issue.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Bryan Brannigan
Sent: Sunday, January 02, 2005 7:21 PM
To: Tim Berger;
I recorded several back to back shows on the 1st (24 hr Monk Marathon). A
couple of the many episodes I recorded did not get sound. I have no idea
what would cause this, and it seems random because it skipped an episode. It
went something like 5 episodes with sound 1 w/o sound 1 w/ sound 1 w/o
I just decided to move forward with creating my own PVR.
The machine I will be installing will also be running my family webserver.
I have been reading through the list archives on hardware recommendations
and various other sources people have mentioned.
Basically it appears any CPU I get today
Axel Thimm wrote:
On Sun, Jan 02, 2005 at 04:30:13AM -0700, Gerald Schepens wrote:
You know, I have a similar issue. I have apt--0.5.15cnc6-53.2.rh9.at
installed.
I used rpm to install kvim with --nodeps because it depends on vim, and
vim is not an installable package according to apt-get.
Title: Need help with xorg.conf
Gforce FX 5200 to a Sony 46 Rear Projection Model KP46WT500. I have tried DVI and can get to the TV but the display is configured wrong. Display is narrow down the center and longer than the screen. I would also entertain using Svideo. I tried read-edid but
I've searched the archvies and the forums at http://forums.gentoo.org
and I'm having a hell of time getting the Gray remote that came with my
PVR-250 working.
I followed the instructions here:
http://gentoo-wiki.com/HARDWARE_Setup_MythTV
When I do a make menuconfig I do not have any option to
On Sun, 2 Jan 2005 23:43:21 -0500, Schwarz, Robert P [EMAIL PROTECTED] wrote:
Gforce FX 5200 to a Sony 46 Rear Projection Model KP46WT500. I have tried
DVI and can get to the TV but the display is configured wrong. Display is
narrow down the center and longer than the screen. I would
I have the second part of several movies set as browsible no for
mythvideo, yet there all visible through the browser. I'm using the
lastest myth through atrpms on FC3 and can't seem to be able to find the
problem. I've used mythvideo for about a year now and haven't had this
problem before, this
I seem to be having the exact opposite focus problem that most have with
xine and MythTV.
I just installed a DVD player in my Myth box and wanted to use xine
instead of mplayer. I changed the launch command, however when I choose
Play DVD from Myth it launches xine but the focus remains on
Forgive me for being a wimp and not signing up for a bugzilla account on
ATRPMs (already drowning in email):
I just tried to dist-upgrade using apt under FC3 and after all the installs,
removals and others, avidemux stops working. This is because avidemux
requires gtk2-devel which requires
Andrew,
I use this site as a starting point.
I have done quite well with SuSE 9.2 up to the point of getting my
nVidia MX 440 SE card to switch to svideo and provide the proper
resolution. Things work well in a window on my 19 Sony computer
monitor - but what I really want is to drive my 31
Hi,
I get this problem too. I guess one way to fix it is to mute the
audio before skipping forward/backwards. Anyone who has a fix, please
reply.
KianTeck
Tim Berger wrote:
Greetings.
Pardon if this is FAQ, but I could not find it anywhere.
I have audio working fine with exception for a
On Sun, 2 Jan 2005 23:25:33 +0100 (CET), Hugo van der Kooij
[EMAIL PROTECTED] wrote:
A significant problem with KnoppMyth is their use of LILO. GRUB is not
that big and it is not such a major pain to troubleshoot. (Try to explain
someone the MUST run LILO as soon as their kernel is touched to
On Sun, Jan 02, 2005 at 11:59:36PM -0500, Dennis B. Hopp wrote:
I've searched the archvies and the forums at http://forums.gentoo.org
and I'm having a hell of time getting the Gray remote that came with my
PVR-250 working.
I followed the instructions here:
100 matches
Mail list logo