Thanks Marc and Korey..
That was the ticket.
The link http://wilsonet.com/mythtv/fcmyth.php#mysql
In combination with the info provided by Mark Tousignant put me in the right
place.
When I listed the users, only the root users had a Y in ANY of the privilege
columns. I used the GRANT
Hi,
Has anybody successfully installed mythtv on XDSL running on an XBox?
(See http://www.xbox-linux.org/XDSL_HOWTO)
I think its essentially just a cut down version of Xebian. I've
managed to install XDSL on a loopback file on my (softmodded) XBox.
It's a Debian based distro, so will I be able
Hi,
This patch doesn't seem to work for me. It applied to svn
revision 6759 with only a little fuzz. Normal Myth stuff works
fine. When I hit 'T', I see TXT on on the screen, but I get no text.
Here is the backend log while recording:
2005-07-02 16:58:04.732 DVB#0 Recorder: Card
I already checked this setting, but I will double check it today, and I
will tell you what happen ;-)
Thanks...
Michael Haas a écrit :
[EMAIL PROTECTED] wrote:
Hi!
Please go back to the setup program and make sure that you've defined
your PVR 250 correctly. I guess that you entered
Any ideas?
Are you absolutely sure you have DVB subtitles available (vs., for
example, TeleText subtitles). Do you use TS mode? If not, try changing
to it, as I haven't tested PS mode for a while.
--
--PJ
___
mythtv-users mailing list
It applied to svn revision 6759 with only a little fuzz.
What do you mean with fuzz? There should not be any problems as the
patch (the latest one, which I just uploaded) is made against the
latest revision.
It seems that it is recording a Teletext stream. Is this the right
stream, or are
any reasons, why i cant watch LiveTV ?
i have probably done everythingi could...
Does keeping the XMLTV ID and CallsignBlank, be the reasons...?
thanks
On 7/1/05, Michael T. Dean [EMAIL PROTECTED] wrote:
Dhiraj Kamble wrote: i see that ivtv is loading before saa7115, tuner,
On 01/07/2005, at 11:24 AM, Pane, Chris wrote: So – Today my motherboard arrived and I realized I hadn’t come up with a remote control solution. My prototype myth box as a mast/slave PC with a PVR250, and I got lirc working with that. My back end in my real deployment will be that same PC, with
Hi ,
Does anybody know if Myth is successful running with the FSC Activity
Model by FSC?
I was not able to research which (exactly) kind of hardware this Product
group use,
because the (German) Specifications are dead on the Website by FSC.
Is anyone else only getting one week of data from radio times? When did that change?
Paul
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
On Sat 2 July 2005 11:36, Paul Woodward wrote:
Is anyone else only getting one week of data from radio times? When did
that change?
Ahh !
Well I've guide data for 12 days and mythfilldatabase ran last night - so it
has happened in the last 2 days.
Looks like I won't be able to go away
Hello all,
I've got 2 TV tuners on my MythTV box - they both can receive exactly
the same programs, but I've created 2 sets of channels each - i.e.
encoder 1 has channel 1: BBC1, channel 2: BBC2 and so on. And encoder 2
has channel 1001: BBC1, channel 1002: BBC2 and so on. It all works
Hi !
I've a weird problem with the svn version. After compiling and installing,
mythfrontend is not starting and gives the following error :
laptop1 mythtv # mythfrontend
2005-07-02 13:28:26.759 New DB connection, total: 1
Total desktop width=1024, height=768, numscreens=1
2005-07-02
I've been trying to get BBC Radio 4 working in MythStream. I've
installed RealPlayer and ethereal and got the rtsp URL as per the
instructions at
http://66.102.7.104/search?q=cache:Mp65gFdh6MAJ:mysettopbox.tv/phpBB2/viewtopic.php%3Fp%3D20239%26+mythstreamhl=enstart=8lr=lang_en
RealPlayer on my
Noobie alert!
I'm building a new box, and would like to drive The Worlds Cheapest
SurroundSound Receiver (tm). I'm looking at a:
CHAINTECH SKT600 VIA KT600 ATX AMD Motherboard
cheap, lots of PCI slots, 2 serial (for modem and IRBlaster)
2 -SAMSUNG SpinPoint 160GB 7200 RPM HDs - mirrored
On 7/2/05, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
Hi !
I've a weird problem with the svn version. After compiling and installing,
mythfrontend is not starting and gives the following error :
laptop1 mythtv # mythfrontend
2005-07-02 13:28:26.759 New DB connection, total: 1
Total
I'd like to request a change to the myxer theme - the mythnews color
scheme has rather poor contrast, especially on the selected news item.
It makes it very difficult to read the headlines.
Thanks!
___
mythtv-users mailing list
mythtv-users@mythtv.org
Original ebuilds have been installed into /usr/share, I've also checked if
there were files containing myth in another directory.
I've used ./configure --prefix=/usr for compiling. But even if I put a copy
of mythtv folder into /usr/local/share, it's not working.
-Ursprüngliche Nachricht-
On Sat, 2005-07-02 at 09:17 -0400, Patrick Vaughan wrote:
The onboard audio says it'll support 6 channel audio, via an external
codec,
I think that means there is a mixer setting that switches between using
the Microphone and Line In ports for Center and Rear channels
respectively. That's how
So has anybody cleared this up? It's still annoying the living
daylights out of me... Using current CVS.
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Stupid question.
Where do I download the source for the stable branch that Jarod is
maintaining?
I am running FC2 using atrpms and tried an apt-get source libmyth which
appears to work, but where does it go?
___
mythtv-users mailing list
Piers Kittel wrote:
I've got 2 TV tuners on my MythTV box - they both can receive exactly
the same programs, but I've created 2 sets of channels each - i.e.
encoder 1 has channel 1: BBC1, channel 2: BBC2 and so on. And encoder
2 has channel 1001: BBC1, channel 1002: BBC2 and so on. It all
Phill Edwards wrote:
I've been trying to get BBC Radio 4 working in MythStream.
...
==
Opening audio decoder: [realaud] RealAudio decoder
opening shared obj '/usr/lib/win32/cook.so'
Error: /usr/lib/win32/cook.so: cannot
Sasha Z wrote:
So has anybody cleared this up? It's still annoying the living
daylights out of me... Using current CVS.
We appreciate your trimming replies, but perhaps you trimmed a bit too
much... :)
What part of seeking is driving you nuts? People are far more likely to
respond
On 2-Jul-05, at 11:45 AM, pmb wrote:
Where do I download the source for the stable branch that Jarod is
maintaining?
http://cvs.mythtv.org/trac/
just below the command for current svn.
-George
___
mythtv-users mailing list
Almost there!!
I've got a WinTV-PVR350, using kernel 2.6.9 vanilla, Myth 0.18-1,
ivtv-0.2.0-rc3j. Everything is up and running on my dual screen setup. Yay!
Here's the problem. . .
I've got a couple of fuzzy channels (ch 69 and 70). Unfortunately those are
channels I like and may want to
George Nassas wrote:
On 2-Jul-05, at 11:45 AM, pmb wrote:
Where do I download the source for the stable branch that Jarod is
maintaining?
http://cvs.mythtv.org/trac/
just below the command for current svn.
Note that will give you the source leading to 0.18.2 (includes updates
since
Hello,
Thing is that encoder 1 is set up properly and working fine, and encoder
2 is experimental, I don't mind if I lose all the rubbish I record on
that, but the good things I use encoder 1.
Anyway, no it wasn't a typo. I told it to use channel 1004, but
recorded channel 3 (i.e. ITV),
Hello,
I have search the archives and can't find the answer to this one...
I recently (last night) got X,mpeg2 decoding, and opengl working on my
via epia m1 board. glxinfo and the X log both report direct
rendering enabled, glxgears runs at about 350 fps. And The openGL
screensavers run
On Jul 2, 2005, at 9:53 AM, Michael Farrell wrote:
On Sat, 2005-07-02 at 09:17 -0400, Patrick Vaughan wrote:
The onboard audio says it'll support 6 channel audio, via an external
codec,
I think that means there is a mixer setting that switches between using
the Microphone and Line In ports
Oh excuse me, I'm very used to the gmail threads scheme.
Say I'm watching a TV show, and I've recorded the tail end of the
previous show. I skip to the next cutpoint (commflagged), but it isn't
in the right place. So I press the skip back button. Instead of
skipping back, it skips forwards again.
Could you describe the fuzziness or post a screenshot? Also, the 0.3.x
dev branch of ivtv give me a better picture, so you may want to try
those.
___
mythtv-users mailing list
mythtv-users@mythtv.org
pmb wrote:
Stupid question.
Where do I download the source for the stable branch that Jarod is
maintaining?
I am running FC2 using atrpms and tried an apt-get source libmyth
which appears to work, but where does it go?
___
mythtv-users mailing list
Does anyone know a work-around to get MythDVD to rip DVD's? This appears
to be broken in the 0.18.1 release.
Thanks,
Matt
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Hmmm. . . Describe the fuzziness. . . It basically looks like the reception is
poor. In my googleing adventure I did find something having to do with the
channel frequencies not being quite right on some of the higher channels ( 60
or so). I was wondering if one of the myth databases within
That was my original thought as well. But, there isn't an S/PDIF output on
the board. Either way, I'm probably not going to get Linux to output 5.1
audio on that board.
quote who=Michael Carland
On Jul 2, 2005, at 9:53 AM, Michael Farrell wrote:
On Sat, 2005-07-02 at 09:17 -0400,
I experimented with bitrates in recording profiles to see what
bitrates give acceptable quality. The results were rather surprising:
1) For PVR350 recording profile, I have to specify bitrates over 1
before I stop seeing differences in quality. This gives me 4GB/hour
files.
2) For
It there anyway to perform an video + audio mixed in capture
on the above
listed hd signals and resolution?
I am on satellite and those are the only hdtv signals
available to me, cable
or off the air is not an option.
I believe there is a something called sdi that is either a
Hi,
After several months away(the box I was configuring was stolen). I'm back
and planning its replacement.
The box will be a SFF Biostar iDEQ 330P with one of the newer/cooler generation
AMD 64 processors (probably a San Diego unless anyone knows a good reason
to go with a 512 KB cache
I just added the UK Radio Times grabber to my setup (I already run
another grabber for the rest of my channels).
After my first grabber has done its thing mythfilldatabase says:
config file /home/mythtv/.mythtv/SkyDigibox.xmltv is empty, please
delete and run me with --configure
On 7/2/05, Daniel Polak [EMAIL PROTECTED] wrote:
I just added the UK Radio Times grabber to my setup (I already run
another grabber for the rest of my channels).
After my first grabber has done its thing mythfilldatabase says:
config file /home/mythtv/.mythtv/SkyDigibox.xmltv is empty, please
Has anyone been able to setup mythtv to use
Leadtek's pvr2000? I have it, and no matter what I select, it just shows static?
Thanks.
Ian
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Original message from Ant Daniel at 2-7-2005 22:21
The problem is in the file location
After my first grabber has done its thing mythfilldatabase says:
config file /home/mythtv/.mythtv/SkyDigibox.xmltv is empty, please
But tv_grab_uk_rt says
I've got a lirc ir receiver plugged into the internal com port header
on the epia. Fits nicely inside a cubid case with a little ir window
cut out below the floppy.
Works a charm with a sky+ remote which includes a mini keyboard.
On 7/2/05, Matthew Phillips [EMAIL PROTECTED] wrote:
On
On Jul 2, 2005, at 2:43 PM, William wrote:
Even ota broadcast signals cannot all be captured as most good
content is encripted.
Not a flame, but do you, or anyone else, have a cite for this? i was
under the impression that OTA HD was not encrypted. I understand
there is the _possiblity_
Could you be more specific as to the nature of your problem?
On 7/2/05, Matt Hannan [EMAIL PROTECTED] wrote:
Does anyone know a work-around to get MythDVD to rip DVD's? This appears
to be broken in the 0.18.1 release.
___
mythtv-users mailing list
Sure. The option is there (Import DVD from the Optical Disc menu),
but it does nothing when selected.
Also, in the Media Settings - DVD Settings, there is no longer the
option to tweak your DVD Rip settings (DVD Ripping?). Check out Media
Settings - Music Settings to see what I mean. There is
I seem to have set something up so commercial flagging is carried out
after the recording is made. Unfortunately this is using up too many
resources and I want to kill mythcommflag. It is commercial flagging the
first part of Live 8 (which doesn't have bloody ads anyway). This has
finished
On 7/2/05, Nick Rout [EMAIL PROTECTED] wrote:
I seem to have set something up so commercial flagging is carried out
after the recording is made. Unfortunately this is using up too many
resources and I want to kill mythcommflag. It is commercial flagging the
first part of Live 8 (which doesn't
I will be using the HTPC into a flat LCD screen with DVI in. If I use DVI
then the hardware decoder of the 350 is irrelevant, but what is the heat/noise
tradeoff for software decoding likely to be using the AMD processor?
I think you may be a bit confused about your components. All of the
Turtle Beach Riviera. Runs around $30 retail, with 5.1 support through
3 1/8 jacks and S/PDIF.
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Finally I got my config to work (pvr 250).
Everything went well, until I reboot the computer to see if the configuration
was good.
Now the LiveTV works for 2 seconds only, and then freezes. After some other
seconds, the liveTV module ends up, and it goes back to the main menu.
mythfrontend says
On 7/2/05, Matt Hannan [EMAIL PROTECTED] wrote:
I was just wondering if anyone had figured a way around this yet.
Yeah, don't use broken packages. ;) MythDVD works just fine, it's
the packaged binary you have that's broken. Wait for an upadate, or
compile from svn.
--- William [EMAIL PROTECTED] wrote:
Currently your only options for capturing hd from sat are to buy a hd
dvr
from directv/dishnet or to spend the money to have one of the few
supported
boxes hacked to add firewire support. The hack info was posted to the
list a
couple of months ago so
On Sat, 2005-07-02 at 22:48 +0100, Ant Daniel wrote:
On 7/2/05, Nick Rout [EMAIL PROTECTED] wrote:
I seem to have set something up so commercial flagging is carried out
after the recording is made. Unfortunately this is using up too many
resources and I want to kill mythcommflag. It is
It's a bit pricy, but I use an X-Arcade stick. It's a
full-sized (well, close to it) arcade stick with two
joysticks and five buttons per player (two players),
plus two Start buttons and two side (trigger?)
buttons.
The main reason I went with it is because I wanted an
arcade style stick, and
It's a Chaintech SKT600's onboard sound. Another poster said that he's seen
onboard audio that uses the other stereo ports to support surround sound. I
had thought that the external codec was probably dependant on Windows
drivers. I downloaded the manual and it says With external high
[EMAIL PROTECTED] wrote:
I was wondering if one of the myth databases within mysql held the channel
frequencies and if that could be fiddled with.
MythWeb - Setup - Channels
Mike
___
mythtv-users mailing list
mythtv-users@mythtv.org
Piers Kittel wrote:
Thing is that encoder 1 is set up properly and working fine, and
encoder 2 is experimental, I don't mind if I lose all the rubbish I
record on that, but the good things I use encoder 1.
Anyway, no it wasn't a typo. I told it to use channel 1004, but
recorded channel 3
Hi Dewey,
If I'd use the pvr 250 but with a regular TV would I have to add
another card to the video output (composite) ?
The video card that you suggested could be used ?
___
mythtv-users mailing list
mythtv-users@mythtv.org
On 7/2/05, Sven Richter [EMAIL PROTECTED] wrote:
The funny think is that mythtv works .. so I can watch tv .. I think it
is with xv mit xvmc but the frontend won't start.
Does anyone know how to create a backtrace ?
There are step by step instructions here:
I usually put cutpoints into a movie before I watch it so I can just let it
run (I don't transcode). The problem is that it always plays about 10
seconds after the delete after this point cutpoints. The delete before
this point cutpoints don't appear to have the problem (certainly not to the
same
I was having the same issue and what I found out was that it was happening
becasue the mythbackend was starting before the ivtv drivers were loaded. What
I have done at the moment is to disable mythbackend from starting on boot up.
Then I make sure the ivtv drivers are loaded and after they are
just a test to see if I can post because none of my message reach the
list. Hope it will work this time.
--
-
Claude Gélinas agr., dta
Phyto Ressources inc.
==
Varennes, Québec, Canada Tél.: (450) 652 9764,
Hello all,
I would like to use Myth to record from the composite input on my PVR 150 MCE.
I can watch composite input using mplayer, so everything is fine on
the hardware side.
I assume I need to create a new input source, and map this to an
input, but this obviosuly doesn't map to any xmltv
Hi!
Here's the error:
User Notice at /var/www/localhost/htdocs/mythweb/includes/mythbackend.php,
line 159:
Unexpected response to MYTH_PROTO_VERSION 'MYTH_PROTO_VERSION 15':
I get this when I try to access mythweb, sometimes. I hate problems
that are intermittent... Anyway, it doesn't always
I regularly have playback problems on my Macintosh either wireless or
wired. I have a backend running FC3 and MythTV version
0.18.1.20050510-1.
After selecting a video to playback in a few seconds it freezes and
then exits. The logs below shows a period of time where the log shows
128000. What
sounds like mythweb is tring an older protocol version, just a guess
but try grabbing the new mythweb from SVN (unless they've gone past
version 16...
-DevanOn 7/2/05, Chad [EMAIL PROTECTED] wrote:
Hi!Here's the error:User Notice at /var/www/localhost/htdocs/mythweb/includes/mythbackend.php,line
Trying to figure out where the VCD settings are...
Currently I have mythdvd using mplayer and this works for DVDs but when
I try a VCD it doesn't work (nothing happens). I know that the
VCD will work in mplayer outside of Myth.-- Thanks,Devan Lippman [EMAIL PROTECTED]
Devan Lippman wrote:
Trying to figure out where the VCD settings are...
Currently I have mythdvd using mplayer and this works for DVDs but when I
try a VCD it doesn't work (nothing happens). I know that the VCD will work
in mplayer outside of Myth.
Then give it the same parameters you use
Can this have anything to do with it?
http://www.gossamer-threads.com/lists/mythtv/users/138493
-John.
On 7/2/05, Sasha Z [EMAIL PROTECTED] wrote:
Oh excuse me, I'm very used to the gmail threads scheme.
Say I'm watching a TV show, and I've recorded the tail end of the
previous show. I
www.mythtv.org
click on downloads
follow your nose.
BUT
No doubt there are .src.rpms for FC2. Probably thats what apt-get got
for you.
Search your hard drive for the file, if you don't know where apt-get
downloads the files to try this:
updatedb (makes sure your locate database is up to
72 matches
Mail list logo
