Jerry Rubinow wrote:
>On 1/30/06, Dan Seddon <[EMAIL PROTECTED]> wrote:
>
>
>>Hi Jerry
>>
>>Video comes to about 30 Mbytes per second - which would be about 240
>>Mbits per second, as you're almost a multiple of 3 bigger I'm guessing
>
eventually did some
>calculations, and 720p at 24bits and 30 frames per second is 632
>Mbits/sec. I saw in the list archives that PCI's maximum transfer
>speed ranges between 600-700 Mbits/sec. However, I think 24 bit video
>is actually using 32 bips per pixels (alpha), and isn&#
again Thank you so much.
Thanks,Dan
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
works in Linux assumably) and is it worth it over Freevew?
Thanks
Dan
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
But DVD's and everything else works, I get video. In TV mode I can see the tv on my monitor but it doesn't go out to the TV. I have the drivers installed correctly for the video card
. Is there anything else that may be causing the pro
ook
like you are running X and I have 1 250 and two 500's and actually use
all five tuners from time to time. Everything slows down when they
all go with real time commercial detection, etc. Handles it just
fine, just not with the interupts needed
inor modificatio can turn a normal Athlon XP into a mobile
athlon too - which enables you to use the athcool stuff under linux.
It's pretty straight forward and there's plenty of stuff on doing it out
there.
Dan
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
er was really happy with how it worked.
And if I did anything like heavy transcode and commerical detection
with myth, asterisk was borked.
Dan
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
are
>7506-8 hardware RAID controller, but the SMART data for all the drives say
>they're OK, so I'm just waiting for it to actually fail completely), add the
>HDTV tuner card I've ordered, and replace the current sound card with one with
>optical S/PDIF output to connect to
Bean wrote:
>Well I did a build from scratch in July last year and happened to still have
>my online bill as below:
>
>Aria Aluminium Media PC Case @ 56.99 +VAT
>Caviar 200GB 8Mb Cache 7200RPM HDD OEM @ 52.99 +VAT
>WinTV Nova-T PCI Digital Free-to-air TV Card @ 51.46 +VAT
>
>
Sorry for the slig
nugget to go searching with, so I'm going to do exactly that. But, thanks
for the help and if anyone can think of anything else that would be great!
Thanks
Dan
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Rudy Zijlstra wrote:
>Dan Seddon wrote:
>
>
>
>>Justin Hornsby wrote:
>>
>>
>>
>>
>>
>>>>That all sounds a bit naff if true. I thought there had been a lot
>>>>of talk about the BBC broad
Justin Hornsby wrote:
>>That all sounds a bit naff if true. I thought there had been a lot
>>of talk about the BBC broadcasting before the World Cup in HDTV in
>>London on terrestial digital?
>>
>>
>
>Well, it's our government who 'own' the airwaves, so it's likely
>they'll sell off the an
Kevin Kuphal wrote:
>Dan Seddon wrote:
>
>
>>Hi
>>This is my first post to the list after getting my system up and
>>running. I have a Mythtv setup which I'm really pleased with it's 95%
>>perfect! However - that remaining 5% is always worth pers
>Terrestrial HDTV is _not_ imminent in the UK, and $ky's HDTV won't be
>capturable by any PC. It _may_ arrive on freesat first though.
>
>In any case, when HD does arrive here it's going to be MPEG4 based, so
>pray that a CPU / graphics card powerful enough to decode it will be
>cheap enough.
>
>
mike choy wrote:
>Dan Seddon wrote:
>
>
>>Hi
>>This is my first post to the list after getting my system up and
>>running. I have a Mythtv setup which I'm really pleased with it's 95%
>>perfect! However - that remaining 5% is always worth persuing so
ou know if this option effects
buffering as well as recording? It might make a good RFE is so?
Cheers
Dan
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
er problem (I get the same issue when running the
frontend on my laptop with a completely different sound card and older
Quadro card). Is anyone else familier with this problem? I'm in the UK -
where we don't have HDTV yet, so I can't be that my systems overwhelmed
by what I
can change it, a hint as to where the
configuration file is would be appreciated.
Thanks;
Dan
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Thank you for the help - I sure do appreciate the
suggestions!
Dan
--- Kevin Kuphal <[EMAIL PROTECTED]> wrote:
> Dan Gapinski wrote:
> > Hi Kevin,
> >
> > Thanks for this reply - mine is in the courier
> system
> > now. What distro are you using? Did it take
Hi Kevin,
Thanks for this reply - mine is in the courier system
now. What distro are you using? Did it take any extra
effort for setup? I s'pose I should look this up
myself, but I thought I'd ask anyway.
Thanks,
Dan
--- Kevin Kuphal <[EMAIL PROTECTED]> wrote:
>
On 1/18/06, Brandon Stoll <[EMAIL PROTECTED]> wrote:
> On 1/18/06, Dan McCarthy <[EMAIL PROTECTED]> wrote:
> > Hi,
> >
> > I have a couple of questions about interlaced output with an ATI card.
> > I am using an ATI 9200 with TV out with the ATI fglrx bina
completely differently by the card?
Also, I have the screen resolution set to 800x600. Should I be setting
this to 576x720 for SDTV PAL with a modeline (if possible) to avoid
any issues with image scaling before it goes out the TV out?
Thanks,
Dan
could do to
lower the CPU requirement a bit? Seems close and I have plenty of
memory when it is running.
Thanks;
Dan
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
the same as getting two 311s.
Yup, that's one of the reasons I went with the two 311s. I remember
it took me a long time to figure this out when deciding what to order
from Dish.
--
Dan Wilga [EMAIL PROTECTED]
Web Administrator
el during LiveTV vs. tuning
during a recording. As a result, your volume will
drop out for 3 seconds if a new recording starts
automatically while you are watching live TV or
watching a different recording.
I think you pretty much have to add it to the
Myth source code, and not to a ch
fore posting it on Ebay. It has all documentation
I'll ship it by insured, tracked mail.
If you're interested in this offer, please email me
directly. I will warrant it for 15 days so that you
can make sure it is working for you.
Thank
I have an nvidia card (can't check exactly which one at the moment) and
I'm using the latest rpm nvidia drivers.
On Fri, 2006-01-13 at 11:47 -0500, Raphael Pooser wrote:
> Dan Adams wrote:
>
> >When I go to listen to music and I've got a song playing and hit 4 for
&g
I'm have a handheld that i would like to watch shows on (actually a
gp2x). Any suggestions on doing this easily? I tried using nuvexport but
it just hangs there at "0 frames of x" and then exits after a long
while.
--
Dan Adams
Software Engineer
Inte
When I go to listen to music and I've got a song playing and hit 4 for
visualization it X crashes xwindows and goes back to the gnome login.
Any idea what the deal with that is?
--
Dan Adams
Software Engineer
Interactive Factory
___
mythtv-
ror: Missing Dependency: libmyth-0.18.1.so.0 is needed by package mythbrowser
Error: Missing Dependency: libmyth-0.18.1.so.0 is needed by package mythdvd
mythlib is right at /usr/lib/libmyth-0.18.1.so.0. anyone else run into this? whats the deal?
--
Dan Adams
C
When watching tv there is a little blue border on the top and left side
of the screen. I've seen this before when watching dvd's. Anyone know
how to get rid of this?
--
Dan Adams
Software Engineer
Interactive Factory
___
mythtv-users ma
Okay, thanks. I'll give that a try when I get home tonight. I already
have the rest of my system pretty much ready to go (including mythtv) so
i'm psyched to get this working.
On Tue, 2006-01-10 at 19:25 -0500, Michael T. Dean wrote:
> Leigh wrote:
>
> >Dan Adams wrote:
&
nd I'v not going through a cable box or anything. Any ideas? Your
help would be *greatly* appreciated as I haven't really been able to
find anywhere with a solution to this. Thanks!
--
Dan Adams
Software Engineer
Interactive Factory
___
mytht
x27;s designed for
sending data over short distances (about 3 feet), such as PDA->Laptop
or laptop->printer.
--
Dan Wilga [EMAIL PROTECTED]
Web Administrator http://www.mtholyoke.edu
Mount Holy
rate thread the tuning script I'm using,
which I wrote with maximum flexibility in mind.
--
Dan Wilga [EMAIL PROTECTED]
Web Administrator http://www.mtholyoke.edu
Mount Holyoke CollegeTel
r me, closing the menu with exit and reopening fixes
the problem, but moving the mouse to the middle of the screen prevents
the problem entirely.
Dan
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
I saw this on digg.com today (hadn't been promoted to
the front page, I found it after searching for "hdtv"
looking for another article). Anyone know if this has
Linux support in its roadmap?
http://www.fusionhdtv.co.kr/eng/Products/HDTV5usb.aspx
___
m
r other IDs, but
I think it has to do with bits 7-9. I'll bet they use a sort of
backward OR, so for a given ID you'd add these values to the code
when ID=1:
ID add
20x200
30x100
40x300
50x080
60x280
70x180
80x380
(T
en't found anyone with a usable
1080i.
Do you know which drivers worked? Which list archvie were you referring to:
nvidia or mythTV?
Any CRT that takes 1080i should also take 540p. The only differences are in
the timing. Of course, LCD and plasma have to digitize and rescale
everythi
Thanks Kevin!
I'll definitely give that a look.
-Dan
--- Kevin Kuphal <[EMAIL PROTECTED]> wrote:
> Dan Gapinski wrote:
>
> >Hello,
> >
> >I'm new to Myth, and need to find the right sound
> >card. My surround sound receiver has an optical
>
Hello,
I'm new to Myth, and need to find the right sound
card. My surround sound receiver has an optical input,
as well as the RCA jacks. Are there any cards that
work well with Myth and output via optical?
Thank you thank you thank you
Extended analog cable and Zap2It
for listings. I used us-cable as my frequency table,
though I've tried us-cable-hrc too.
Relevant modprobe.conf and dmesg sections are included
below.
Thanks,
Dan
modprobe.conf
---
# ivtv modules setup
alias char-major-81 videodev
alias
ght a MyBlaster device to use instead of
LIRC-based hardware.
--
Dan Wilga [EMAIL PROTECTED]
Web Administrator http://www.mtholyoke.edu
Mount Holyoke CollegeTel: 413-538-3027
South Hadley, MA 01075
80i.
The Sony is happy with 720p from the 6600Gt. The Sony displays 1080i from its
internal tuner just fine.
The Panasonic can do 540p but not 720p. The Panasonic was supposed to be
driven from my HD-3000 based PVR, but I never got the tuner to work with over
the air signals. I find 5
.
>
> Have you fed a 1080i signal to your TV with another device?
No, I don't. That would be very usefull, but all the possible options are
$300+. I don't feel like throwing more money at the problem right now.
-Dan
___
mythtv-users mail
s (as of 4 months ago). I
can do 540p or 720p fine. Note that not all sets that support 1080i will do
720p. The 720p signal has a higher horizontal refresh rate and my Panasonic
can't display it.
Stick to progressive. It will save a lot of headaches.
If anyone has gotten this to work,
At 7:37 PM + 11/20/05, Justin Hornsby wrote:
Right. New screenshots at
http://homepage.ntlworld.com/justin.hornsby2/images/new/
I get a "404" error whenever I try to access this page or the first
screenshot page. did they zorch your account for bandwidth overuse?
--
At 10:30 AM -0500 11/15/05, Brian J. Murrell wrote:
Is there a way to tell mythtv what time to do the filldatabase operation
when using it's internal scheduler for that and not simply calling the
filldatabase from cron?
Yes, it's in mythtv-setup, IIRC.
--
Has anyone had any success getting good performance out of mplayer or
any other video player to work with mytvvideo on the xbox?
Mplayer chugs and stutters on most video files and I can't get xine to
do anything...
Any tips aprechiated.
thanks,
. Are there
any issues to be aware of, or do most/all joypads work well under FC4?
I have a Saitek P3000 RF Gamepad that's quite good. I got it for
something like $15 after rebate.
--
Dan Wilga [EMAIL PROTECTED]
Web Adm
and move
on. At the very least, take the discussion into private email.
--
Dan Wilga [EMAIL PROTECTED]
Web Administrator http://www.mtholyoke.edu
Mount Holyoke CollegeTel: 413-538-3027
Sou
o
scaling. What size are you recording at? If it's not an even multiple
of the correct PAL or NTSC size, Myth will have to scale the image.
--
Dan Wilga [EMAIL PROTECTED]
Web Administrator http://www.mtholyoke.edu
Mount
gives much better quality, I've found.
--
Dan Wilga [EMAIL PROTECTED]
Web Administrator http://www.mtholyoke.edu
Mount Holyoke CollegeTel: 413-538-3027
South Hadley, MA 01075"Wh
"unofficial Bugzilla for the ATi Linux
driver", does ATI even read it? If past performance is any
indication, I doubt it.
--
Dan Wilga [EMAIL PROTECTED]
Web Administrator http://www.mtholyoke.edu
Mount Holyo
;s in Setup->Appearance, and then the very
last screen of options.
--
Dan Wilga [EMAIL PROTECTED]
Web Administrator http://www.mtholyoke.edu
Mount Holyoke CollegeTel: 413-538-3027
South Hadley, M
interference, since it's wired link to the receiver.
--
Dan Wilga [EMAIL PROTECTED]
Web Administrator http://www.mtholyoke.edu
Mount Holyoke CollegeTel: 413-538-3027
South Hadley, MA 01075
README doesn't mention this problem, but perhaps it has been
fixed anyway. I'll try it tonight.
--
Dan Wilga [EMAIL PROTECTED]
Web Administrator http://www.mtholyoke.edu
Mount Holyoke College
Never mind I'm an idiot I forgot to set the directory to store the
videos in.
Thanks again.
On Mon, 2005-11-07 at 00:23 -0500, Dan Brow wrote:
> Does not work for me. I've already selected the title I want to rip, if
> I hit 0 it takes me back to a screen to tell me to 0. So afte
Does not work for me. I've already selected the title I want to rip, if
I hit 0 it takes me back to a screen to tell me to 0. So after you
select a track should it not say 1 Process Selected Title instead of 0?
Thanks.
On Sun, 2005-11-06 at 17:13 -0800, Peter Darley wrote:
> Dan,
>
really. I try it out. Thanks.
On Sun, 2005-11-06 at 17:13 -0800, Peter Darley wrote:
> Dan,
> This bit me too. What's it's meaning to say is 'Hit 0 to process
> selected',
> not '0 processes selected'. So hit the '0' key.
> Thanks
I can't rip a disc, I stick the disc in and it shows up I can select
options and the disc, but it says 0 process selected, mythtv 0.18.1 and
mythplugins 0.18.1, all deps are installed.
Dan.
___
mythtv-users mailing list
mythtv-users@mythtv.org
layback?
This sounds like a very sensible explanation. I've tried playing raw
myth tv recordings before and experienced similar silence issues so
would really make a lot of sense.
So does anyone know how to tell VLC which audio track to use?
dan.
___
r the difference in format is which VLC doesn't
like.
Can anyone shed any light on how to ensure I can get audio :)
thanks
Dan.
(ps: Command line:/opt/mythstream/mythstreamtv/mythstreamtv.sh 'DIV3'
'mp3' '128' '128' '.5' '20' 'ht
y fan and they only spin up to an audiable level when in
heavy usage. Had a TNT video card on my server and that was really
painful to use, changed it out for a FX5200 and it to rocks. Maybe
look at your video card.
Dan
___
mythtv-users mailing list
myth
On Sun, 2005-10-30 at 17:04 -0500, Michael T. Dean wrote:
> Dan Brow wrote:
>
> >On Sat, 2005-10-29 at 15:41 -0400, Michael T. Dean wrote:
> >
> >
> >>Dan Brow wrote:
> >>
> >>>mythtv configure will not take the enable-firewire option,
On Sat, 2005-10-29 at 15:41 -0400, Michael T. Dean wrote:
> Dan Brow wrote:
>
> >mythtv configure will not take the enable-firewire option, I've got
> >firewire built into the kernel, install libraw1394, libavc1394 and
> >libdv. What could be missing?
> >
&
mythtv configure will not take the enable-firewire option, I've got
firewire built into the kernel, install libraw1394, libavc1394 and
libdv. What could be missing?
Thanks,
Dan.
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mytht
e your home entertainment center. The signal bounces off the
wall to get to the equipment.
I'm guessing this is what they intended you to do, not put the
emitter directly in front of the device (as is probably more
desirable in this case, so you don't have to worry about people or
fur
y, since the video will be routed to your PVR
box, not the TV.
--
Dan Wilga [EMAIL PROTECTED]
Web Administrator http://www.mtholyoke.edu
Mount Holyoke CollegeTel: 413-538-3027
South Hadley, MA 01075
rsion of ivtv, there's a utility,
ivtv-detect, which tells you exactly this.
--
Dan Wilga [EMAIL PROTECTED]
Web Administrator http://www.mtholyoke.edu
Mount Holyoke CollegeTel: 413-538-3027
So
GHz P4 running on an ASUS motherboard that use
the ATI chipset. So none of that matches the original poster.
I am also using a PVR-250 and a PVR-350. There's no secondary video
card; I'm using the onboard ATI video.
--
Dan Wilga [EMAI
> >
> > I am getting this case as well and have been told by Silverstone tech
> > support
> > that the front panel buttons work in conjunction with the IRman remote
> > control interface, so yes, they work, they output commands that LIRC picks
> > up
> > and then you assign them.
The hot key fun
> >
>
> I was concerned about that too and as a result have been looking more at
> the LC-10m. If you find out the buttons work please let me know that
> would make an amazing case
Will do, I'm looking at a 2 week wait for the case though
I'm just wondering if the front buttons work, play, stop, skip, etc?
I don't have the case yet but I'm thinking of getting it.
Thanks,
Dan.
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
My build test bed has no tuner card in it and everything is working,
video play back, music.
just type mythfrontend mythdvd and presto just the dvd plugin.
Dan.
On Mon, 2005-10-24 at 13:44 -0700, Mark Elrod wrote:
> Hello All,
>
> I am trying to setup a Myth system that only uses M
On Mon, 2005-10-24 at 15:15 -0700, Erik Hovland wrote:
> On Mon, Oct 24, 2005 at 09:12:43PM +, [EMAIL PROTECTED] wrote:
> > I keep getting unsupported version of xmame, what version is support?
>
> What version of mythtv, distro and xmame do you have?
0.18.1, slackware 10.2 + dlg gnome, tried
I keep getting unsupported version of xmame, what version is support?
Thanks,
Dan.
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
At 9:43 AM -0400 10/22/05, Dan Brow wrote:
Do you really need XvMC for most systems?
IMHO, if you're only using SDTV, no. I'm using the 9100 IGP chip
built-into my motherboard, and it works quite well, now that ATI has
finally fixed their driver. The only thing that doesn't
Do you really need XvMC for most systems? I'm building a few myth boxes
with ATi cards, will this extension work for ATi cards?
Thanks,
Dan.
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
LCDproc side
without code modifications. You might have better luck suggesting it
to the Myth devs, since LCD output is being worked on very actively
right now. The new Myth LCD daemon (in SVN) is very slick!
--
Dan Wilga [EMAIL PROTECTED]
Web
x27;s .xml file to fix the problems
you're noticing.
--
Dan Wilga [EMAIL PROTECTED]
Web Administrator http://www.mtholyoke.edu
Mount Holyoke CollegeTel: 413-538-3027
South Hadley, MA 01075
ptrail550
gap 5530
min_repeat 8
toggle_bit 0
frequency56000
--
Dan Wilga [EMAIL PROTECTED]
Web Administrator http://www.mtholyoke.edu
Mount Holyoke CollegeT
instance.
http://lcdproc.sourceforge.net/nightly/
However, you need to use a recent version of Myth with this version
of LCDproc. I don't think 0.18.1 will work with it, you may have to
go to the last stable beta.
--
Dan Wilga [EMAIL PROTECTED
If you have the card working can't you just do
dd if=/dev/video0 of=/tmp/video_file.mpg
Not a Myth solution or the most convenient, but could work.
Dan
On 10/19/05, Erik Karlin <[EMAIL PROTECTED]> wrote:
> On Wed, Oct 19, 2005 at 01:49:32PM -0500, Trey Boudreau wrote:
> >
This looks like a good idea, thanks for posting it. One thing I
notice in glancing at it, though:
for TARGET in `ls -tr *.nuv`
In the current SVN version, only MPEG4 recordings end in '.nuv'.
MPEG2s end in '.mpg'.
--
Dan Wilga
At 9:01 AM +0800 10/11/05, Tj wrote:
Try disabling use libmpeg2 (or something similiar to that) for
playback... If I disabled that, it will work for me...
Just writing to confirm that this worked. Thanks!
--
Dan Wilga [EMAIL PROTECTED]
Web Administrator
d, and don't see anything that
seems relevant.
- Both my Default and mp2->mp4 transcode settings are set for 720 x
480 screen size.
Any ideas?
--
Dan Wilga [EMAIL PROTECTED]
Web Administrator http://w
elopers decided that showing it full-screen
translucent was the best compromise.
Later versions of the ivtv driver for the 350 include a much improved
framebuffer driver that should be able to handle the PiP-style
preview, but I don't know if Myth takes adv
fixed
in later versions.)
--
Dan Wilga [EMAIL PROTECTED]
Web Administrator http://www.mtholyoke.edu
Mount Holyoke CollegeTel: 413-538-3027
South Hadley, MA 01075"Who
dds and deletes can make
space usage and table indexes really inefficient.
--
Dan Wilga [EMAIL PROTECTED]
Web Administrator http://www.mtholyoke.edu
Mount Holyoke CollegeTel: 413-538-3027
South Ha
annot open the file:
"1087_2005092019.mpg"
I tried this a couple of months ago, and had to run the video through
nuvexport first to get it to work. Even then, QT didn't seek
correctly--I had to play the whole thing start to finish or it would
ha
retty cool replication features, which I use to
back up all of my site's data to two other machines in real time.
It's a pain to set up, but works pretty well once it's turned on.
--
Dan Wilga [EMAIL PROTECTED]
Web Administrator
l have to look again.
Thanks again for the upload.
--
Dan Wilga [EMAIL PROTECTED]
Web Administrator http://www.mtholyoke.edu
Mount Holyoke CollegeTel: 413-538-3027
South Hadley, MA 01075"
I went to install it last night, and realized that there's more to it
than just plunking it into the themes directory. What else needs to
happen?
After you finish telling me, you might put the same instructions into
your README.
--
Dan Wilga [
I like it a lot, except for the creepy eyeball between the channel
number and the description. :-)
--
Dan Wilga [EMAIL PROTECTED]
Web Administrator http://www.mtholyoke.edu
Mount Holyoke College
.)
--
Dan Wilga [EMAIL PROTECTED]
Web Administrator http://www.mtholyoke.edu
Mount Holyoke CollegeTel: 413-538-3027
South Hadley, MA 01075"Who left the cake out in the
There's a known problem with older versions of the proprietary ATI
driver that causes this. If forcing NTSC doesn't help, try upgrading.
--
Dan Wilga [EMAIL PROTECTED]
Web Administrator http://www.mtholyoke.edu
Mou
would suddenly stop.
--
Dan Wilga [EMAIL PROTECTED]
Web Administrator http://www.mtholyoke.edu
Mount Holyoke CollegeTel: 413-538-3027
South Hadley, MA 01075"Who left the
On 9/13/05, Dan Littlejohn <[EMAIL PROTECTED]> wrote:
> I have been looking and trying a number of things, but have not been
> able to figure this one out after I upgraded my box.
>
> /usr/lib/mythtv/plugins/libmythgallery.so: undefined symbol:
> _ZN9QGLWidget16setMouseT
1 - 100 of 483 matches
Mail list logo
