On 30/01/06, David Abrahams [EMAIL PROTECTED] wrote:
When I watch recorded material on OS X there's what looks like a one
(source) pixel line of seemingly random black and white pixels. The
source material is fine; I don't see the garbage when I play it in
VLC. Does anyone know where this
On 26/01/06, Nathan Allen Stratton [EMAIL PROTECTED] wrote:
On Thu, 26 Jan 2006, Michael T. Dean wrote:
Set your input to start on channel 1000.
Same problme, the issue I think is that it is trying to change the
channel, but it is a VCR on that input, there is no channel to change to.
trouble is - when it was done, the recorded program didn't show up in the
recorded programs part of the GUI. I can't find where the file was
recorded to - I did a search on the hard drive (recorded on 1/12/06)
find / | grep *20060112* and it came up blank.
Does grep work with wildcards?
On 24/01/06, Jason Richardson [EMAIL PROTECTED] wrote:
whenever I watch live tv, the hard drive goes
nuts, and continues doing so until live tv is stopped. it plays/pauses
etc and works just fine, but the noise that the drive makes is quite
annoying.
You've probably already done this but
On 25/01/06, Roger Hanson [EMAIL PROTECTED] wrote:
David Watkins wrote:
trouble is - when it was done, the recorded program didn't show up in
the
recorded programs part of the GUI. I can't find where the file
was
recorded to - I did a search on the hard drive (recorded on
1/12/06)
find
On 17/01/06, Andy Foster [EMAIL PROTECTED] wrote:
On 1/17/06, Adam Propeck [EMAIL PROTECTED] wrote:
DSMYTH. Google it or look at sourceforge specifically. It sets up the
Myth:// and Mythlive:// and all that stuff.
ok, I should probably clarify myself. I have DSMyth installed. The problems
On 23/01/06, Jad Saklawi [EMAIL PROTECTED] wrote:
Hello,
I am currently using mythtvgallery. How to access the menu using the
keyboard ? I have no remote control.
Well it's pretty dangerous doing this without having a system to check
it on but anyway:
I'm pretty sure it's the 'M' key - the
You must not have small children. My power and reset button just make a
clicking sound - cause I disconnected the wires to it! Even my littlest
figured out
how to hold the button for 4 seconds to power it off.
It turns on by IR remote, and shuts down cleanly by IR remote. If I have to
- Out of the box, the picture quality from my PVR-150 system doesn't
equal broadcast quality (of my SD analog cable system) for fast moving
TV, most notably sports. Emphasis on out of the box, since I've done
almost nothing to try to improve the quality.
Could this be due to your output
If anyone knows of a solution to the problem or a less ugly workaround,
please let me know.
I found a fix digging around the net. There's a section of Xine source code
that sets the focus to the root window upon exit (event.c line 1814-1819).
The attached patch comments out that
I have an IR keyboard. The BIOS is configured
to power-on with any key-press. I programmed my remote to send
the key-presses from my keyboard. That's also how I send all other
commands. I don't use LIRC at all on the front end. My keyboard
is always put away and I only need it if I'm
My ultimate goal is to have PVR functionality that is completely
independent of what I am doing on the PC. For this to work I need,
(1)live TV functionality to take minimal processor load, and (2)MythTV
to only use the remote control for input and completely ignore the
system's keyboard and
On 10/01/06, Phill Edwards [EMAIL PROTECTED] wrote:
As you can see below (in Canberra) most SD is 720x576 but WIN is 704x, SBS
EPG is 480x, one Prime is 544x... it seems to vary.
Thanks. How did you get that log? I'd like to do that too.
Looks like tzap output to me? Part of dvb-utils.
On 10/01/06, David Watkins [EMAIL PROTECTED] wrote:
On 10/01/06, Phill Edwards [EMAIL PROTECTED] wrote:
As you can see below (in Canberra) most SD is 720x576 but WIN is 704x,
SBS EPG is 480x, one Prime is 544x... it seems to vary.
Thanks. How did you get that log? I'd like to do
On 08/01/06, Myth TV [EMAIL PROTECTED] wrote:
Message Received: Jan 08 2006, 11:00 AM
From: Steve Daniels [EMAIL PROTECTED]
To: Discussion about mythtv mythtv-users@mythtv.org
Cc:
Subject: Re: [mythtv-users] Fail to tune channels in UK using
On 05/01/06, John Biundo [EMAIL PROTECTED] wrote:
Paul Harrison wrote:
One thing that it might be worth checking is your lircrc file used by myth.
You can
usually find it in ~/.mythtv/lircrc.
Look for the key that you use for pause. Mine looks like this:
# Pause
begin
prog =
On 22/12/05, Ryan Green [EMAIL PROTECTED] wrote:
The place of my employment currently has a setup where presentations
are shot with a camera, and then currently recorded onto a VCR, and
then captured from that tape onto a Computer for DVD. Currently, this
takes us too much time and effort, and
The tuners in the Hauppage PVR series are analog tuners -- they
convert analog NTSC or PAL (etc) signals into MPEG2. To give them a
signal to record, your source needs to be a clean analog signal,
either from the antenna or cable, or from a converter box.
The PVR tuners can also capture and
On 21/12/05, Joacim J [EMAIL PROTECTED] wrote:
Thanks anyway ;-)
Do you have any idea about the questions I wrote:
I don't have the /dev/dvb/... or the adapter/frontend aren't
registered...is it because the /dev/dvb/...isn't created?? When/Where
are /dev/dvb/... created?
I missed the
On 21/12/05, Joacim J [EMAIL PROTECTED] wrote:
On 12/21/05, David Watkins [EMAIL PROTECTED] wrote:
On 21/12/05, Joacim J [EMAIL PROTECTED] wrote:
Thanks anyway ;-)
Do you have any idea about the questions I wrote:
I don't have the /dev/dvb/... or the adapter/frontend aren't
On 21/12/05, Joacim J [EMAIL PROTECTED] wrote:
I have tested to enter the MythTV setup (as mythtv user) but when
trying to add the TV card I get permission denied on the card and when
looking at the /dev/dvb/* it's owned by root.root.
How can I make mythtv.mythtv to get permission on that
On 21/12/05, Joacim J [EMAIL PROTECTED] wrote:
On 12/21/05, David Watkins [EMAIL PROTECTED] wrote:
On 21/12/05, Joacim J [EMAIL PROTECTED] wrote:
On 12/21/05, David Watkins [EMAIL PROTECTED] wrote:
On 21/12/05, Joacim J [EMAIL PROTECTED] wrote:
Thanks anyway ;-)
Do you
On 20/12/05, Jason [EMAIL PROTECTED] wrote:
hey folks, just set up a new myth box on a PII Celeron 400Mhz box with
512Megs of memory.
mythtv ~ # uname -a
Linux mythtv 2.6.14-gentoo-r4 #3 PREEMPT Thu Dec 15 17:57:43 EST 2005 i686
Celeron (Mendocino) Genui
neIntel GNU/Linux
Ive got:
On 18/12/05, Nick [EMAIL PROTECTED] wrote:
On 18/12/05, Michael Haan [EMAIL PROTECTED] wrote:
Can someone tell me where to get this for FC4?
You can get dvb-apps source from here:
http://www.linuxtv.org/downloads/
Not sure about RPMs...
I think it's in the linuxtv-dvb-apps rpm, on the
On 08/12/05, Brad Karal [EMAIL PROTECTED] wrote:
Hi friends:
I am using KnoppMyth R5A22 (yeah, I know-should redo with a non-SVN
version.)
Until I can do that, I'd like to be able to use the second tuner in the box.
1st tuner: Hauppauge PVR-150 (/dev/video0)
2nd tuner: Hauppauge PVR-150MCE
On 07 Dec 2005 06:29:13 -0800, Jim Reith [EMAIL PROTECTED] wrote:
At 09:05 AM 12/7/2005, you wrote:
On 12/7/05, Alessandro Boggiano [EMAIL PROTECTED] wrote:
Hi all,
usually if I want watch a VHS,I can use the antenna cable between the
vcr and the tv (I know,the quality is bad),put channel 36
On 30/11/05, CHRIS KOTTING [EMAIL PROTECTED] wrote:
I'm having an issue with blank recordings, and I wanted to confirm what I'm
finding by searching the archive (because I'm hoping that there is a
different answer available).
I have two inputs to a PVR-150 card connected, Tuner0 goes to my
David Watkins mentioned that you can use LIRC to change the keys of the
remote. I think he was referring to a ATI remote which uses the
ati_remote.ko kernel module. LIRC has its own kernel module for that remote.
I'm not sure you can use LIRC with a usbhid device that thinks
On 28/11/05, larry [EMAIL PROTECTED] wrote:
Hello all,
I am new to the list Mythtv...
My setup here is Debian/Linux, kernel version 2.6.11... I have downloaded
mythtv_0.18.1.orig.tar.gz...
After extracting it, I then did a ./configure, now after doing that I do not
see an executional
On 28/11/05, Ben Edwards [EMAIL PROTECTED] wrote:
I came back at the end of the weekend and my hard disk had filled up.
When I tried to delete anything the frontend hung when I went to
delete a probram and selected 'Delete it'. I ended up hading to
manually delete a old program media data for
On 24/11/05, David Aquilina [EMAIL PROTECTED] wrote:
Greetings all,
I'm fairly new to MythTV and am experiencing an occasional problem
with ghosting audio. When viewing some previously recorded shows, if
something else is being recorded at the same time I'll hear the audio
from the new
I'm using my HP Pavilion w5180.ch running SuSE 9.3.
How can I configure my remote control device to work with LIRC?
Linux has detect the usb device as a keyboard and mouse. You don't need lirc.
You can either change MythTv key mapping to match your remote with MythWeb or
modify the
On 24/11/05, Rama, Ganesh Koti [EMAIL PROTECTED] wrote:
Hi all,
I have built Mythtv on Fedora core 3.Using Win Tv Express v4l card.
I am able to watch tv when I give composite video input from a set top
box.
But not able to record the same.
I am in India I don't have any kind of EPG
On 16/11/05, Marty Ravell [EMAIL PROTECTED] wrote:
It simply means that you didn't use
lircd --logfile /var/log/lircd
My box is FC3 and I run this with :
/sbin/service lircd start
The /etc/sysconfig/lircd file had little in it apart from :
# Options to lircd
LIRCD_OPTIONS=
On 15/11/05, Curtis White [EMAIL PROTECTED] wrote:
On 11/14/05, Curtis White [EMAIL PROTECTED] wrote:
It appears now I have hit another new problem I can't seem to figure out.
I have the PVR350 card with DirecTV going to the tuner of the card. I
have recorded several shows. When I go to
On 13/11/05, stevew [EMAIL PROTECTED] wrote:
Folks,
I'm looking for a little help getting the final pieces running on my system.
I have a Nvidia 5200, PVR350 combination. I have audio and video under
mplayer, but Watch TV only has audio? I can also watch DVD's under myth with
no problem.
On 10/11/05, 赵亚伟 [EMAIL PROTECTED] wrote:
Hi,everyone
I have installed my mythtv well ,and it runs well.
But mythbackend cannot autostart.
Everytime I have to command, /sbin/service mythbackend start
I want it to start by itself when computer starting
When my computer is starting ,I get this
On 09/11/05, Devan Lippman [EMAIL PROTECTED] wrote:
Shopping for a new tv-out for my frontend and came across this at a very
reasonable price: JATON Geforce4 MX440 Video-198PCI-64TV Video Card
I was thinking about it though and this probably will not do any hardware
decoding for video? It
On 09/11/05, Ben Edwards [EMAIL PROTECTED] wrote:
I have managed to get a good picture in mplayer so I guess my dvb card is
set up.
When I go to scan shannels it just sits there for about a minute with 'no
lock' and eventualy gives up and comes up with 'Error tuning to transport';(
What
On 09/11/05, Nick Rout [EMAIL PROTECTED] wrote:
The mythvideo metadata editing screen does not allow you to change a
whole lot of stuff like plot etc.
Being able to put the imdb number in is fine for a movie, but for a
downloaded tv series it is no good. I just end up with a whole lot of
On 09/11/05, Ben Edwards [EMAIL PROTECTED] wrote:
On 11/9/05, David Watkins [EMAIL PROTECTED] wrote:
On 09/11/05, Ben Edwards [EMAIL PROTECTED] wrote:
I have managed to get a good picture in mplayer so I guess my dvb card
is
set up.
When I go to scan shannels it just sits
On 09/11/05, Folashade Adeyosoye [EMAIL PROTECTED] wrote:
What am I missing, I tried following
(http://www.litwiller.net/mythtv/remote.html) these
instructions but for each button that I press on the remote, it repeats 4
times. For example if I hit the 3 button I get
What might
On 08/11/05, Simon Cowell [EMAIL PROTECTED] wrote:
Is this list indexed somewhere that I can search in its history?
http://www.gossamer-threads.com/lists/mythtv/users/
___
mythtv-users mailing list
mythtv-users@mythtv.org
On 06/11/05, ffrr [EMAIL PROTECTED] wrote:
According to the documentation...
Q: How do I create a new playlist? A: Using the MythMusic Select
Music menu option, setup the playlist as you normally would by adding
songs or other playlists as needed. When you are ready to save the new
playlist,
On 07/11/05, ffrr [EMAIL PROTECTED] wrote:
ffrr wrote:
David Watkins wrote:
Can you jump down the list? Example, I am looking at the list of
artists, and all the A s are showing. Can I jump down to those
starting
with 'S', or even filter the list so it only shows those
On 03/11/05, Jon Kunze [EMAIL PROTECTED] wrote:
I don't think so, I've never had a problem with it before.
I also tried copying and pasting it from Firefox on the mythbox into nano in
a terminal on the mythbox, and still no luck.
selinux?
___
I took your suggestions and tried messing with alsamixer while playing
something, I never heard audio no matter what I tweaked.
Probably a dumb suggestion, but you did make sure that the channels
weren't muted ('m' toggles muting on and off). It's not as obvious on
alsamixer as on some other
On 02/11/05, Carl Fongheiser [EMAIL PROTECTED] wrote:
On 11/1/05, Grant Emsley [EMAIL PROTECTED] wrote:
Is there any key that does page down in mythmusic? I have mostly singles,
and have a giant directory of MP3s...scrolling with the remote is far too
slow. Even scrolling with the
On 02/11/05, Frank Simorjay [EMAIL PROTECTED] wrote:
After laborious efforts I have put together a frequency list of channels
that seem to work. However the format of the channels.conf file works with
azap, but nothing else.
I'd like to get the data imported into channel info of myth, I
On 30/10/05, Robert Callicotte [EMAIL PROTECTED] wrote:
Greetings,
I recently re-installed mythtv from the RPMS located
at ATRPMS and made it through the setup process.
After running mythfilldatabase and mythbackend fo the
first time I ran mythfrontend. Here is a excerpt of
that run error
On 31/10/05, Jo Shields [EMAIL PROTECTED] wrote:
DVB-T, rather handily, automatically adds new channels when they appear.
This happens both with my set-top boxes, and with Myth. However, there's
a tendancy to re-add channels I went to the effort of deleting - I don't
want QVC, I don't want
On 28/10/05, R. Geoffrey Newbury [EMAIL PROTECTED] wrote:
On Thu, 27 Oct 2005 21:58:20 +1000, Phill Edwards wrote:
I've noticed that make install puts the binaries into /usr/local/,
whereas the rpm binaries are currently in /usr/local/bin, so am I
correct in thinking that nothing would
I've compiled a few frontends from source, but my backend (18.1) was
built using rpms.
I'd now like to compile mythtv for the backend. I'm reasonably
comfortable with doing the build, and I've read the upgradetoCVShowto
(although I'll be using the 18.1 tarball), but I'm still a bit unclear
on
On 27/10/05, Phill Edwards [EMAIL PROTECTED] wrote:
I've noticed that make install puts the binaries into /usr/local/,
whereas the rpm binaries are currently in /usr/local/bin, so am I
correct in thinking that nothing would get overwritten and I manually
move files or adjust the order of
On 25/10/05, Scot L. Harris [EMAIL PROTECTED] wrote:
On Tue, 2005-10-25 at 16:25, Steve Adeff wrote:
On Tuesday 25 October 2005 15:42, Scot L. Harris wrote:
On Tue, 2005-10-25 at 15:18, Joshua Lewis wrote:
I am seriously considering the MythTV as an alternative to having 5
satellite
On 26/10/05, ffrr [EMAIL PROTECTED] wrote:
The upgrade from 2005LE to 2006 was fairly smooth, and nearly everything
works - except mythtv
The problem seems to be something to do with mysql permissions and/or
host names. The back end dies as follows...
2005-10-26 17:59:40.637 New DB
On 24/10/05, Simon Allcorn [EMAIL PROTECTED] wrote:
Hi David,
Thanks for the response, I think you may have hit the nail on the head !
I got these from tzap and, as I say, they worked for me.
How did you get tzap to do this ? I can't see an option for this !
Can't see a version number in
On 23/10/05, Simon Allcorn [EMAIL PROTECTED] wrote:
Hi,
I'm having trouble to get myth-tv to tune into a transport stream with
my DVB card (nova-t). If I use mythtv-setup and select Channel
editor/Scan for channels/Full scan I get the following:
...
2005-10-23 14:39:07.661 DVB#0 DVB SI
On 22/10/05, Michael T. Dean [EMAIL PROTECTED] wrote:
Derek Meek wrote:
Dan Brow wrote:
Do you really need XvMC for most systems? I'm building a few myth boxes
If you're using a hardware based capture card ( PVR x50 or dvb-x) and
outputting at standard definition then you probably don't
On 20/10/05, Neil Bird [EMAIL PROTECTED] wrote:
Around about 19/10/05 14:25, David Watkins typed ...
I just bought a Matrix Orbital MX630
http://www.kustompcs.co.uk/acatalog/info_2954.html
It's a USB device and, with an optional cable, plugs into the
motherboard USB header. So
On 18/10/05, Ben Edwards [EMAIL PROTECTED] wrote:
I have kaffeine wrking fine but when I run mythtv-setup and go into 'Channel
Editor' the 'Scan Channel(s)' button and the Advanced' button can not be
navigated to and pressed. I have put BBC ONE in and its correct frequency.
Any ideas?
Well
On 19/10/05, Neil Bird [EMAIL PROTECTED] wrote:
I asked a short while back about using a small USB LCD display with Myth,
and got a couple of hints as to what I might look for.
However, I remain unsure as to what support there actually is in Myth for
driving these things. Am I limited
On 19/10/05, Ben Edwards [EMAIL PROTECTED] wrote:
On 10/19/05, David Watkins [EMAIL PROTECTED] wrote:
On 18/10/05, Ben Edwards [EMAIL PROTECTED] wrote:
I have kaffeine wrking fine but when I run mythtv-setup and go into
'Channel
Editor' the 'Scan Channel(s)' button and the Advanced
On 19/10/05, Ben Edwards [EMAIL PROTECTED] wrote:
On 10/19/05, David Watkins [EMAIL PROTECTED] wrote:
...
The card type is 'Standard V4L capture card' and can not be changed.
What
should dvd0 show up next to, I have viewo devide /dev/video0. shuld
this be
/dev/dvb0
On 18/10/05, W.Kenworthy [EMAIL PROTECTED] wrote:
The alternative view: in Australia (Perth) the program info is lousy,
missing or plain wrong.
Channel surfing is where its at (we only have a small handful of
channels - not counting the dups), and the delays are a real pain, as is
the OSD
On 18/10/05, Jon Kunze [EMAIL PROTECTED] wrote:
Ok, here's what happens when i try to reinstall lirc
[EMAIL PROTECTED] mythtv]# yum install ivtv-kmdl-$KVER
Setting up Install Process
Setting up repositories
atrpms100% |=| 951 B00:00
On 15/10/05, David Whyte [EMAIL PROTECTED] wrote:
On 10/16/05, David Whyte [EMAIL PROTECTED] wrote:
I know the avermedia cards have a video AV slot, but was wondering how
I could record that to my PC. How do I get the sound in, and how does
it all come to be synchronised.
Just to
On 18/10/05, Ben Edwards [EMAIL PROTECTED] wrote:
Hi, got fairly far setting up my MythTV box. How to I find out what
transmitter I am using, I think it is Beacon Hill that is in Exmouth bot not
certain, how can I find out? The other thing is I then need to find out the
frequency. I found
On 18/10/05, Jon Kunze [EMAIL PROTECTED] wrote:
Sorry about that, I was trying a few different things, and copied the wrong
command.
As for the kernel idea, I thought of that late last night as well. Does
anyone know if the FC4 kernel modules have been updated? If so, what do I
need to do,
In mythtv-setup my channel scan is 'grayed out'. Do I need to enter the
channels from above someware?
I think that means that your dvb card is not available. What happened
when you set up the card? Did it let you select dvb0? Make sure
mythbackend is not running when you run mythtvsetup as
On 17/10/05, David Barkman [EMAIL PROTECTED] wrote:
Hi, I'm working on the initial portion of my MythTV
install, following Jarod's doc (great doc btw!).
In step 5, I ran the Yum upgrade, set the KVER
variable and rebooted. I then ran step 6, adding the
third-party repos, and decided to run
On 17/10/05, Ben Edwards [EMAIL PROTECTED] wrote:
I am in the process of setting up a mythtv box. Have been looking through
various howtos but am not sure what modules I need to modprobe.
with my Hauppauge Nova-t (which looks to be the same model as yours)
all I needed to modprobe was dvb-cx88
On 17/10/05, Ben Edwards [EMAIL PROTECTED] wrote:
On 10/17/05, David Watkins [EMAIL PROTECTED] wrote:
On 17/10/05, Ben Edwards [EMAIL PROTECTED] wrote:
I am in the process of setting up a mythtv box. Have been looking
through
various howtos but am not sure what modules I need
On 17/10/05, Ben Edwards [EMAIL PROTECTED] wrote:
On 10/17/05, David Watkins [EMAIL PROTECTED] wrote:
On 17/10/05, Ben Edwards [EMAIL PROTECTED] wrote:
I am in the process of setting up a mythtv box. Have been looking
through
various howtos but am not sure what modules I need
On 13/10/05, Bill Robson [EMAIL PROTECTED] wrote:
Hey all,
Quick question. Where abouts are the settings stored for the auto-skip
commercials? - Not in the menus, but which configuration file(s)?
they're in the msql database called mythconverg
___
On 11/10/05, Sebastian Nerz [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
I have a strange problem ...
Whenever I plug the Audio-Out of my PVR350 in my MIC-In I get some
strange sounds - audio of I dont know what TV-Channel. That audio stays
the same whatever
On 07/10/05, Larry K [EMAIL PROTECTED] wrote:
Joe, Thanks for the info.
That fact that the buttons can have arbitrary names explains a lot.
I'm wondering how I will know what kernel modules support this 3rd party IR
receiver? The seller said it works with mythtv, so it probably does. If I
On 06/10/05, E Norm One [EMAIL PROTECTED] wrote:
I've been trying to setup a system where slave backends will be started
and terminated on-demand. The Slave BackEnds are diskless and they
share the main video partition with the Master BackEnd over NFS.
This way i imagine that i can save the
On 05/10/05, Steve [EMAIL PROTECTED] wrote:
I have a Scientific Atlanta Cable box that outputs cable via S-Video into my
PVR-500. I'm not sure exactly where I plug it into my PVR-500 and I'm also
not sure what settings need to be modified in mythtv-setup. (video0/s-video1
or 2, video1/s-video1
On 06/10/05, Steve [EMAIL PROTECTED] wrote:
Wow thats sounds alot harder than it looks :(
On 10/6/05, David Watkins [EMAIL PROTECTED] wrote:
That's pretty much correct. The steps are:
1) You tell the mythtv frontend that you want to change channel.
2) The frontend tells the backend
On 05/10/05, Justin Debbie [EMAIL PROTECTED] wrote:
Hi all,
i have read many different threads on the subject and have come back to the
same problem - i cannot get the card to work no matter what i try.
Basically dvb-t lite cards are supposed to autodetect since 2.6.9. Not a
problem mine
On 05/10/05, James Hansen [EMAIL PROTECTED] wrote:
When using a seperate back/front end for mythtv, is it possible to have
these running across a reasonable wireless connection?
I'm talking about watching an averagely encoded file. If not, could I
use an old 10baseT ethernet card, or do I
On 05/10/05, paulg [EMAIL PROTECTED] wrote:
I've been following Jarod's fine HowTo to get mythtv working with my
Hauppauge WinTV-PRV 150 on FC4. I've watched and listened to captured tv
with cat and mplayer combination so I believe the card and sound are
working. Irc isn't yet but mythtv just
On 04/10/05, Marty Ravell [EMAIL PROTECTED] wrote:
Can anyone tell me if it is possible to rip a DVD and then encode it in such
a way that I can watch it through the hardware decoder on my PVR 350?
I have played around at getting the new ivtv drivers to work but the video
quality on
On 04/10/05, Tyler Bartel [EMAIL PROTECTED] wrote:
I have been figting with a problem all evening that I am hopng someone can
help me with:
Machine:
Intel 1.8Ghz / 512RAM
Running 2.6.13-1.1526_FC4
Hauppage WinTV PVR-150
I have been following Jaron Wilsons Howto on getting MythTV running
On 04/10/05, Ricardo Kleemann [EMAIL PROTECTED] wrote:
Hi all,
I have mythtv 0.18.1 installed and working fine on a Fedora 4 system, with
PVR-150MCE and a GeForce4 MX440 setup.
I don't really need to change channels in the sense that I expect the tuner
to tune away, because I simply have a
On 03/10/05, Jim Householder [EMAIL PROTECTED] wrote:
Hi
I'm making some progress with mythtv. Using the excellent guidance at
http://wilsonet.com/mythtv/fcmyth.php I have 0.18.1-114 running on FC4.
Hardware: V-Stream DTV DVB-T, 2.4GHz P4, 1GB ram
I can watch the composite input from a
On 28/09/05, Larry K [EMAIL PROTECTED] wrote:
Calling all LVM experts!!
Up until recently, I had been running LVM with only a single physical
volume. I probably have 100GB of data files in the volume, waiting to be
watched. So, Myth was running fine and all was well, except I had a 150GB
Also the pixels aren't really dead -- they show color, just a
different color than the pixels to the right and left. When that part
of the screen is certain colors (green, red, black), there is no
noticable problem, but when that bit is blue (other than default),
white, or other lilght
The server uses network protocol version 14, but this client only
understands version 15. Make sure you are running compatible versions
of the backend and frontend.
Have any of you seen this? What is it referring to. I think that both
versions of mythtv are 0.18. I think the frontend version
On 26/09/05, Ben Edwards [EMAIL PROTECTED] wrote:
I'm new to this list but have thinking about building a MythTV box of a year
or so. I've now started ordering bits (well a antec overture II case) and
am planning on using a Hauppauge WinTV NOVA-t freeview PCI card and
Ubuntu/512MB memory.
Now I get it ;) So it is a graphics card with TV out connected to the TV, I
guess the TV outs on the TV cards are all daisy chained into the Graphics
card (with TV in/out). I did not realise I would need a graphics card with
TV out as well as the freeview cards. I thought the TV out on the
On 26/09/05, Dave Oxley [EMAIL PROTECTED] wrote:
Hi all,
I have a MythTV box (Gentoo Linux) that has 2 DVB cards in it. The audio
from the DVB-S card is fine, but the DVB-T gives static (video is fine
on both). What makes this stranger is that I have a frontend on my
laptop (FC3) that
On 22/09/05, Brian J. Murrell [EMAIL PROTECTED] wrote:
On Wed, 2005-09-21 at 19:03 -0700, Mark Kundinger wrote:
You can have a shell script that responds to the power key and kills
the frontend:
Yeah. I have something similar. Killing off mythfrontend just so
coarse.
AFAIK there's no
On 20/09/05, Alan Bates [EMAIL PROTECTED] wrote:
hi all – I now have a stable dvb-t myth setup running on an up-to-date
fedora core system, using the hauppage nova-t. only major problem thus
far is:
watching certain UK channels, the frontend crashes when the commercial
break begins –
Specifically, I am trying to figure out how to change settings
concerned with commercial detection and deletion, automatic
transcoding after recording and perhaps video card settings. (I have a
Hauppauge PVR-150 and thought I read somewhere it could record
directly to MPEG4 rather than
On 16/09/05, Javier Perez [EMAIL PROTECTED] wrote:
Hi
How come I can Rip a CD with Grip but I cannot do it from within MythCD.
Mythfrontend crashes as soon as I just try to do it. Has this problem been
solved? It did not look like it
from googling around.
Also, How can I just play a CD?
No tearing, performance is exactly the same as with older
hardware, and there's no colorkey to show up at odd times. =)
Is this the bright green, blocky flash that I sometimes see on scene
changes with my GeForce MX440?
If so, are there any tips on minimising or removing it?
On 15/09/05, PAUL WILLIAMSON [EMAIL PROTECTED] wrote:
You shouldn't be running MythTV as root. There is no reason
for /home/.mythtv to exist because you installed MythTV
as root. Bad thing. In general, it's not good to
installing anything as root because you're lazy. Sorry,
that's what
On 15/09/05, PAUL WILLIAMSON [EMAIL PROTECTED] wrote:
[EMAIL PROTECTED] 09/15/05 7:32 AM
On 15/09/05, PAUL WILLIAMSON [EMAIL PROTECTED] wrote:
You shouldn't be running MythTV as root. There is no reason
for /home/.mythtv to exist because you installed MythTV
as root. Bad thing. In
1 - 100 of 169 matches
Mail list logo
