itors and use the
>> recommended 220k resistor as in the application note and see how it behaves
>> - also use the pins recommended in the application note, ie CLKIN & CLKOUT.
>>
>> /Martin
>> On Sunday, 18 July 2021 at 20:53:32 UTC+2 MrThe50sanchez wrote:
>>
&
uestion:
> http://ww1.microchip.com/downloads/en/devicedoc/41364e.pdf they also
> mention the 91097a.pdf above as a document to read on page 71.
>
> /Martin
>
> On Thursday, 20 May 2021 at 20:40:49 UTC+2 MrThe50sanchez wrote:
>
>> Ei Martin!
>>
>>
19, 2021 at 11:55:42 PM UTC-7 MrThe50sanchez wrote:
>
>> ? Any recommendations of where can I get a good quality cristal for my
>> watch?
>>
> --
> You received this message because you are subscribed to a topic in the
> Google Groups "neonixie-l" group.
> To unsubscr
.
El mié, 19 may 2021 a las 17:07, jf...@my-deja.com ()
escribió:
> Did you ever get it t run at the correct speed? If so, how did you fix it?
>
> On Monday, April 19, 2021 at 1:23:22 AM UTC-7 MrThe50sanchez wrote:
>
>> I builded a Nixie watch, It works good, but I'm h
timekeeping when the probe is removed.
> I can adjust it to within one second per week using this technique. I've
> done this on 2000 Nixie watches by now, so it works.
>
>
> On Mon, Apr 19, 2021, 1:23 AM MrThe50sanchez
> wrote:
>
>> Hello Guys!
>>
>> I have a n
00949a.pdf
>
>
>
> Even Wikipedia has a decent chapter on xtals:
>
> https://en.wikipedia.org/wiki/Crystal_oscillator
>
>
>
> Lots of other good information sources on the interweb.
>
>
>
> Cheers, Bill
>
>
>
> *From:* neonixie-l@googlegroups.com
oper
> timekeeping when the probe is removed.
> I can adjust it to within one second per week using this technique. I've
> done this on 2000 Nixie watches by now, so it works.
>
>
> On Mon, Apr 19, 2021, 1:23 AM MrThe50sanchez wrote:
>
>> Hello Guys!
>>
>>
d within limits, larger cap slows it down, smaller
>> cap speeds it up. Sometimes (if you use 2 caps) using a slightly different
>> cap on one leg of the crystal can make a difference in the final frequency.
>>
>>
>>
>> Bill
>>
>>
>>
>&
gt;
>
> *From:* neoni...@googlegroups.com [mailto:neoni...@googlegroups.com] *On
> Behalf Of *MrThe50sanchez
> *Sent:* Monday, April 19, 2021 4:23 AM
> *To:* neonixie-l
> *Subject:* [neonixie-l] CRISTAL + CAPACITOR = TIME DELAY HELP
>
>
>
> Hello Guys!
>
>
>
&g
Hello Guys!
I have a nice question to ask you guys if you can give me some help.
I builded a Nixie watch, It works good, but I'm having a little bit of time
delay, 1* min within 6 hours. *
At the *first time,* I had 6 min delay for 6 hours aproximately. I
investigated the relation of the
Hello everyone !
what kind of Nixie tube sockets do you recommend?
I'm using IN-16 / IN-14 and ZM1000 nixie tubes for my clocks, and I'm
wondering if you can recommend me any kind of sockets to avoid soldering
the nixie tubes to the PCB, I would love to have a quick release for the
tube's
Hello!
hahaha well, the main reason I want to see this working is generating high
voltage, but, It would be so funny watching it catching fire!
Yes, now I understand that the MOSFET must be on the reverse side, drain
and source.
Gregebert, Am I okay with this quote?
*"To see the Booster
Hello !
I was making a little bit of research and found this type of booster
converter.
What can you tell me about this one? I wan't to know how it works.
I nearly understand how flyback boosters converters works and LT1308
devices, but:
-Does here the mosfet make the switching mode for
PM Kevin A.
> wrote:
>
>> I've also been designing some nixie flyback power supplies lately. I will
>> do a full writeup on my website of the project when the project is
>> complete.
>>
>> I recommend these tools because I have experience with them and they
>&
complete.
>
> I recommend these tools because I have experience with them and they work!
>
> On Tue, Jun 23, 2020 at 4:22 PM MrThe50sanchez
> wrote:
>
>>
>> Hello Again, hope everyone is good!
>>
>> I was trying to make a DC-DC booster converter using the LT130
dnesday, June 24, 2020 at 9:06:07 AM UTC-4, MrThe50sanchez wrote:
>>>
>>> Hello !
>>>
>>> Yes, I used the components that the Datasheet says, I got it from here:
>>>
>>>
>>> The thing is, that a Triple Voltage Circuit uses electrolitic
>>> ca
e rating of the 47k resistor? What are the voltage
>> ratings of the 10nF capacitors? What is the voltage rating of BAV21W? What
>> is the saturation current of the transformer?
>>
>> On Wednesday, June 24, 2020 at 6:46:01 AM UTC-4, MrThe50sanchez wrote:
>>>
>>>
he 47k resistor? What are the voltage
> ratings of the 10nF capacitors? What is the voltage rating of BAV21W? What
> is the saturation current of the transformer?
>
> On Wednesday, June 24, 2020 at 6:46:01 AM UTC-4, MrThe50sanchez wrote:
>>
>> Hello! Thanks for the response!
lculation your FB divider will
> draw more current than the device can supply. I might be wrong but worth
> looking at.
>
> Cheers
> Ian
> On Wednesday, 24 June 2020, 11:45:17 BST, MrThe50sanchez <
> the50s...@gmail.com > wrote:
>
>
> Hello, Thanks for your answer.
n make or break a DC-DC converter with all
> of the high current transients and control signals.
>
> On Tue, Jun 23, 2020, 4:22 PM MrThe50sanchez > wrote:
>
>>
>> Hello Again, hope everyone is good!
>>
>> I was trying to make a DC-DC booster converter usin
Hello Again, hope everyone is good!
I was trying to make a DC-DC booster converter using the LT1308B/A device,
I made a PCB for it, doing the same as the datasheet of this device says,
but I don´t get the High Votage, and that`s
why im here asking for help, I tried a lot of things put don`t
Ei!
Thanks, going to take a look at it!
thanks a lot!
El jue., 14 may. 2020 a las 18:56, Bill van Dijk ()
escribió:
> Anyone interested in playing with PIC devices may want to take a look at
> the Microchip AppNote TB053. It describes (in great detail) how to use a
> PIC16C781 for a boost
Hello!
Wow, I was looking a lot to the datasheet but just the first schematic It
appeared, Just going to study the one you just said, It looks really good.
[image: high voltage.PNG]
Thanks a lot,
best regards from Spain.
El jue., 14 may. 2020 a las 17:35, newxito () escribió:
> There is a
Hello!
So sorry that I putted in the wiring diagram the capacitors without the
positive and negative pins. As I searched, yes, they need to be with
polarity for the cicles high up the voltage in every step.
About the transformer, The LT1308B does have the pin SW so when it is on,
It give`s the
d to flow.
>
> On Thursday, May 14, 2020 at 5:50:57 AM UTC-4, MrThe50sanchez wrote:
>>
>>
>> Hello Everyone!
>>
>> Im just building a high booster voltage converter implementing Fly-back
>> converter theory using LT1308B and also triple voltage circuit.
&
Hello Everyone!
Im just building a high booster voltage converter implementing Fly-back
converter theory using LT1308B and also triple voltage circuit.
I want to start with a small amount of voltage (CR2 3V 850 mAh or litium
batery 3,7 1,8Ah) and get to 180v to light up a Nixie tube. the
> https://www.shop-tes.com/power-supply/
>
> https://www.ebay.com/itm/NCH8200HV-High-Voltage-DC-Power-Supply-for-Nixie-Tubes/172818490547
>
> On Tuesday, March 31, 2020 at 6:30:26 AM UTC-4, MrThe50sanchez wrote:
>>
>> Hello !!
>>
>> Hope everyone is good!
Thanks! =)
El vie., 9 nov. 2018 a las 21:50, Gergely N ()
escribió:
> Hello!
>
> They are four ZM1000 and one ZM1001. They are not big, just average size
> but fine tubes.
>
> --
> You received this message because you are subscribed to the Google Groups
> "neonixie-l" group.
> To unsubscribe
Thanks to all for replying!
I just wonder if there was a cheap way to do it home made, but, I just sent
the piece to webside´s to get a CNC stimate price! (But it is a lot
expensive LOL).
El sábado, 21 de julio de 2018, 2:21:57 (UTC+2), J Forbes escribió:
>
>
> there are so many ways to
Hello everyone!
I was trying to figure out how to make the case of the watch, maybe, making
a silicon mold or from other material.
I have also a 3D printer, but Im just looking to make it on a good material
(More resistant than PLA) and to have a natural finish.
I have searched a lot in
Hi everyone!
Im a Nixie Tube lover!
Im building a Nixie watch, and I bought a lot of Nixie tubes , there are
Hitachi CD79.
I´m selling a some of them because I dont going to need it and maybe
someone can give them a good use!
I leave here the Ebay link, or email me for a good price.
Hi everyone!
Im a Nixie Tube lover!
Im building a Nixie watch, and I bought a lot of Nixie tubes , there are
Hitachi CD79.
I´m selling a some of them because I dont going to need it and maybe
someone can give them a good use!
I leave here the Ebay link, or email me for a good price.
Email:
32 matches
Mail list logo
