Here is a ghetto way of doing of it, but it will work. Just hookup the SCSI
drive while installing
the OS and then add the IDE after setting up the machine. I'm sure there is
a better way of doing it but this
should work.
Derrick
- Original Message -
From: ATL Oledog [EMAIL PROTECTED]
Jon Schwartze wrote:
No. that didnt work, I had already tried that before your post. but thanks anyways!
See I think I should get an ISA modem that uses Jumper cables...so the computer
actually
treats it like an external serial modem...what do you all think??
Proper external modems are
I don't know if this applies to you but on the @home network I had to name
all the machines the same name(cx-a##)
that was given to me by @home and then change there aliased name in
/etc/hosts this solved the problem for me if not then I am out of ideas.
Good Luck
Derrick
- Original
Rolf wrote:
Hi,
I installed Linux-Mandrake 6.1 about a week ago. All went well and I am
just about to try to make Linux the default OS on here. Had a look around
for a Linux ICQ program and found KXicq-0.3.1.tgz . I can't get it to
install. Error message after ./configure is: 'configure:
Thanks to everyone:
At last I´d found a server that support resuming:
ftp://sunsite.org.uk/packages/Mandrake/iso
ftp://sunsite.org.uk/packages/Mandrake/iso
I´m really greatfull.
-
Javier Matos
Ingeniero de Sistemas de
Wait, what? "all the machines the same name" i get but
what is "(cx-a#)?" So far I have named the
computers in the standard way. The line I am "hooked
up" to is a "loaned" T-1 and should not have to be
subject to such an "odd" precedure. As I said the
linux box cruises just fine, and the NT
I feel for you. 56K is a drag, I D/L'd it in less than
an hour and forty five minutes, not to rub it in. ;)
sean
--- "Matos , Javier" [EMAIL PROTECTED] wrote:
Thanks to everyone:
At last I´d found a server that support resuming:
ftp://sunsite.org.uk/packages/Mandrake/iso
Tried all but mc - which I use a lot - really nice. :)
Thanks.
Original Message
On 1/17/00, 10:27:37 PM, Warren Doney [EMAIL PROTECTED] wrote
regarding Re: [newbie] Stupid questions:
"Ty C. Mixon" wrote:
Now for my stupid question, and I should know the answer but . . .
I've got
Jon Schwartze [EMAIL PROTECTED] wrote:
Ok, I'm seriously getting pissed that neither my ISA winmodem or my PCI
modem will work in
Linux. I'm taking back the PCI modem tommorow
I need to know EXACTLY what to get, Thanks in advance guys
JON
===
Get an external. I
[EMAIL PROTECTED] wrote:
SNIP
manual setup And I have to ask do you know why I cannot browse on mine.
I get mine connected but I cannot browse at all or chat or anythingbut I
get connected and stay connected!!
John
===
edit /etc/resolv.conf
add:
search your isp
I suggest downloading a better download manager. Don't be offended, but
I'm not a fan of Getright. I suggest downloading Go!Zilla. It does a
wonderful job...and it is totally free.
When using Go!Zilla (and/or others, such as WS_FTP), it seems that it
doesn`t download the symlink
On Mon, 17 Jan 2000, you wrote:
Does anyone know if MandrakeSoft is going to have a pavilion at the
LinuxWorld Expo in New York City this February?
Both the LinuxWorld and Mandrake websites say they will be there.
I just got my tickets in the mail today, anyone else on the list going?
--
On Tue, 18 Jan 2000, you wrote:
Hi all, IP Masq is configured and working. (KINDA) The computers on
the internal network can ping IP addresses but not URL's, The Linux
box is set as the gateway for the rest of the network and can ping
both ways, so I am thinking that I am missing reverse DNS
On Tue, 18 Jan 2000, Alex V Flinsch wrote:
Both the LinuxWorld and Mandrake websites say they will be there.
I just got my tickets in the mail today, anyone else on the list going?
Sounds like fun. . .well if microsoft ever allows a linux event in the seattle
area ill be there. . .
Once you've go Go!Zilla installed, you can just download the iso image.
HTH,
Matt
From: "Marc Herms (Mercator GmbH)" [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: RE: [newbie] Download Mandra 7.0 (Air)
Date: Tue, 18 Jan 2000 11:11:01 +0100
I suggest
Yes they will, read @ their hp!
Original Message
On 2000.01.18, 23:18:41, Alex V Flinsch [EMAIL PROTECTED] wrote
regarding Re: [newbie] LinuxWorld:
On Mon, 17 Jan 2000, you wrote:
Does anyone know if MandrakeSoft is going to have a pavilion at the
LinuxWorld Expo in New York City this
Hi Audrey and Tom,
thank you both so much for your support.
I havn't much to report yet other than I had a quick look over the
suggestions and release notes at the intel site. I ran the rpm files thru
the kpackage and played around with the xf86config file. I made a backup
copy then rebooted.
Install using Expert. Then you can pick what to probe or not. Don't
probe anything that locks it up. You'll have to manually configure
those devices, but it's faster than reinstalling til it works.
David Amundson wrote:
I'm installing linux/mandrake on a Compaq Pentium LTE 5250,
I get them. I just ignore them. Setup your filters to send them to the
trash.
RICHARD FRIEDMAN wrote:
I'm wondering if I'm the only one repeatedly receiving a message welcoming
me to "the Cooker list."?
This has been going on for a few weeks now!
Rick Friedman
Salant Corp. - MIS
Hi, newbie ...
Who both of you have experience and get the new Mandra 7.0 ? Please inform
me! Thanks a lot.
regards,
[EMAIL PROTECTED]
--
Losta masta, ... I love penguins ? :-)
--
I had that problem using Mandrake v6.1
-Original Message-
From: Audrey Beck [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, January 18, 2000 6:22 PM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] installation stops
Install using Expert. Then you can pick what to probe or not. Don't
probe
Hi all
I have just installed mandrake Linux 6.5
First and hardest: Is that Disk Druid has trashed my partition tables (my
machine also runs mainly OS/2 warp 4) such that I am unable to run either
Partition Magic 3.05 or fdisk from OS/2 although my disks are booting normally I
am unable to
Ok. As I mentioned in my rant yesterday, I have a
printing problem. I run on a Compaq Presario 4862. I installed
Mandrake 6.5 in a dual boot setup with Win98se. Everything I have tested
seems to work with the exception of printing.
After installation, I went to Printtool and defined a
On Tues, 18 Jan 2000, Alex V Flinsch wrote:
Both the LinuxWorld and Mandrake websites say they will be there.
I just got my tickets in the mail today, anyone else on the list
going?
I'll be there. I'm only getting an exhibits only badge but I'm registered!
Rick Friedman
i started the kedevelop program with it came up with this message
saying that the make command was not found can anyone tell me what is
needed to fix this problem
kernel 2.2.13.4mdk
thank you
Is there a simple way to open the .iso file, without a
cd-rom burner?
This would be the simplest way for me to get 7.0
Under LINUX, you can use a reverse lookup under MOunt to open it and pull
files from and use it.
Under windows, [I'm assuming you're using Windows]. you have to get a
program called WinImage from Volliant software that can open and extract
files from it. I think the url is www.winimage.com.
If
I did everything you guys said, now I have "modem busy"
with Kppp.
When I do a "uname -r", I get "2.2.5-15BOOT"
When I do a "uname -m", I get "i686"
when I cat /etc/mandrake-release I get
"Linux Mandrake release 6.1 (Helios)"
I have a Gateway pentium III 450 and windows98 and Linux
and 64MB of
Im stuck on something else now,
On startup, how do I get the login dialogue where you get the login name and
password and the dropdown box to choose either kde/gnome/firststep etc. I
used to get this but I must have changed something where now Im getting a
login prompt and after entering
hey man,
I'm having the exact same problem as you. What kind of modem do you have? I
have a
WINMODEM, and an Internal PCI modem, both of which..Dont work (of course the
winmodem
wont work, thats why I bought the PCI one). I've been on this list a few days
now,
and
i don't have a winmodem and im getting that same problem! argh! does
someone know why "the modem is busy" when we try to get it working?
ive got a us robotics isa modem
Sounds like you changed the default run level. Edit /etc/inittab
and change the line (x is probably a 3):
id:x:initdefault:
to
id:5:initdefault:
Just be careful with that file.
Richard
On Tue, 18 Jan 2000, Gina wrote:
Im stuck on something else now,
On startup, how do I get the login
My installation of linux went very well, but i'm having trouble configuring
my video card
an ATI RAGE PRO LT 8mo with TFT12.1 LCD monitor
My laptop is Dell inspiron 7500. Xwindows will not run.
Can anyone help.
Hi,
I just want to say that Winmodem are not supported by Linux and they
will NEVER be supported. I read that in a HOWTO about configuring modems
in Linux... Whatever, I don't suggest you to buy another modem, choose
rather a faster connection.
By the way, I'm new here :)
Jonathan
Jon
34 matches
Mail list logo