Hi All People,
Kindly advise a simple and straightward method to configure network
settings in using DHCP to improve the detection on dynamic IP address.
Thanks in advance.
B.R.
Stephen
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
with following command;
mount /dev/cdrom -t udf /mnt/cdrom
or
mount /dev/cdrom1 -t udf /mnt/cdrom
mounting CDRW on CDWriter desktop icon only reading following 2 files;
- autorun.inf
- udrinst.exe
Any suggestion on modifying /etc/fstab for remedy.
Thanks in advance.
B.R.
Stephen Liu
Want to buy your
in
(/usr/local/sbin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bi
n:/root/bin)...
what I have been missing ?
B.R.
Stephen
At 09:05 AM 12/30/2001 -0500, you wrote:
On Sunday 30 December 2001 08:26 am, Stephen Liu wrote:
Hi All People,
When I rebuild src.rpm
Hi All People,
When I rebuild src.rpm it prompted
Make : tex : can't find command
What is this command ?
Thanks
B.R.
Stephen Liu
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
:
On Sunday 30 December 2001 08:26 am, Stephen Liu wrote:
Hi All People,
When I rebuild src.rpm it prompted
Make : tex : can't find command
What is this command ?
~ $ which tex
/usr/bin/tex
~ $ rpm -q --whatprovides /usr/bin/tex
tetex-1.0.7-31.1mdk
Note: the -31.1mdk means
At 09:05 AM 12/30/2001 -0500, you wrote:
On Sunday 30 December 2001 08:26 am, Stephen Liu wrote:
Hi All People,
When I rebuild src.rpm it prompted
Make : tex : can't find command
What is this command ?
~ $ which tex
/usr/bin/tex
~ $ rpm -q --whatprovides /usr/bin/tex
tetex
)...
what I have been missing ?
B.R.
Stephen
At 09:05 AM 12/30/2001 -0500, you wrote:
On Sunday 30 December 2001 08:26 am, Stephen Liu wrote:
Hi All People,
When I rebuild src.rpm it prompted
Make : tex : can't find command
What is this command ?
~ $ which tex
)
if [ $PROMPT != no ]; then
/sbin/getkey i touch /var/run/confirm
fi
wait
Any suggestion ?
Thanks
B.Regards
Stephen Liu
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hi All People,
How to open/view .vcf file, which software to be used ?
B.R.
Stephen Liu
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
specification on google and try to visit versit.com.
ciao!
On Thu, 27 Dec 2001 19:25:32 +0800
Stephen Liu [EMAIL PROTECTED] wrote:
Hi All People,
How to open/view .vcf file, which software to be used ?
B.R.
Stephen Liu
--
Programming, an artform that fights back
for text and graphic mode
selection at boot/start ?
Thanks in advance.
B.Regards and Merry X'Mas
Stephen Liu
At 12:20 PM 12/20/2001 -0500, you wrote:
ehh.. not sure of exactly what you mean, but, you can start linux as
without Xwindows running, if you have configured lilo to start at run level 5
.
Stephen
At 12:43 PM 12/23/2001 -0900, you wrote:
On Sat, 2001-12-22 at 23:04, Stephen Liu wrote:
Hi All People,
Merry X'mas
I have some further RAID questions to ask :
1) Can ATA-133 hard drive be used on RAID controller available on market
such RAID 0, 1, 0+1 etc. with cable
hard discs
c) What does it mean Low ratio of ECC (Parity) disks to data disks means
high efficiency ?
Thanks in advance.
B.R.
Stephen Liu
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hi All People,
What will be the hot keys for toggling between text and graphic modes at
starting Linux
Thanks
B.R.
Stephen Liu
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hi all people,
Sorry for (OT)
Kindly advise how to install SO.6.beta in .bin format to Mandrake 8.1 and
where to join the discussion list of StarOffice.
Thanks in advance.
B.R.
Stephen
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
when inserted
Thanks in advance.
B.R.
Stephen Liu
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hi All People,
Kindly advise :
How to test the performance of a Video Card
Thanks in advance.
B.R.
Stephen Liu
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
:
Copy the httpd.conf file to the /etc/httpd/conf/ directory.
Copy the apache file to the /etc/logrotate.d/ directory.
Copy the httpd script file to the /etc/rc.d/init.d/ directory.
Where can apache file and httpd script be located ?
Thanks in advance.
B.R.
Stephen Liu
At 08:45 PM 11/21/2001
name and password I can connect the same ISP mail server
in Eudora and Outlook Express to download emails.
Kindly help !!!
Thanks in advance.
B.R.
Stephen Liu
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
) What are the difference between openssl-0.9.6b-8.i386.RPM and
openssh-server-2.9p2-7.i386.rpm
Kindly advise.
Thanks in advance.
B.R.
Stephen Liu
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hi Arthur,
In your email of 10/31/2001 to the list you attached a procmail recipe to
your email. Could you please email it to me.
Thanks in advance.
B.R.
Stephen Liu
Date: Wed, 31 Oct 2001 15:38:06 -0500 (EST)
From: Arthur H. Johnson II [EMAIL PROTECTED]
To: [EMAIL PROTECTED
Hi Derek,
Thanks for your response.
At 11:34 PM 11/13/2001 +, you wrote:
I would not worry about that too much. Evolution is still not final code. It
does crash sometimes.
I would be more interested in what the output of the fetchmailconf test
showed you.
Derek
At time performing
)
has crashed due to fatal error
(Segmentation fault)
I could not connect to the email server of ISP
B.R.
Stephen
-Mensaje original-
De: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]En nombre de Stephen Liu
Enviado el: domingo, 11 de noviembre de 2001 7:38
Para: Rafael Lepra
CC: [EMAIL
Hi Derek,
At 01:19 PM 11/11/2001 +, you wrote:
Sounds strange.
Does it work with another mail client such as Evolution?
I think that most likely the problem came from my OS - Mandrake 8.1
When I tried Evolution, on retrieving email from ISP it prompted :
evolution - mail
(Process. 2623)
in Kmail, a warning pop-up saying Error, incorrect
password. But it can send emails without problem. I am quite sure the
password entered in configuration is correct.
Any guy on the list came across such strange thing ?
B.R.
Stephen Liu
Want to buy your Pack or Services from
, a warning pop-up saying Error, incorrect
password. But it can send emails without problem. I am quite sure the
password entered in configuration is correct.
Any guy on the list came across such strange thing ?
B.R.
Stephen Liu
Password is case sensitive. You might try reentering your
configuration, and if you are not
including capitals letters.
I hope this helps :-)
Rafael Lepra
-Mensaje original-
De: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]En nombre de Stephen Liu
Enviado el: viernes, 09 de noviembre de 2001 14:01
Para: [EMAIL PROTECTED]
Asunto: [newbie] Kmail cannot
across such strange thing ?
B.R.
Stephen Liu
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hi Poogle,
Sorry. The correct link should be ;
http://www.seagate.com/support/seatools/
B.R.
Stephen Liu
At 04:05 PM 11/8/2001 +, you wrote:
On Wednesday 07 November 2001 21:04 pm, you wrote:
Can anyone tell me how to do a surface scan on a hard disk, known to
contain bad sectors
Hi Ron,
Thanks for your further advice.
I think your first step, Stephen, is to clearly define
what you want to *do* with all that hardware. Until
you do that, it's difficult to advise you more
specifically.
I am planning using the Linux box, a slower machine with following config. ;
CPU
, Squid
will serve it up even if it is not connected. But I
think he was refering to WWWoffle (I don't know it).
It sounds similarly to certain software in Win environment which can
download the whole website allowing you browsing it off line.
B.R.
Stephen Liu
Want to buy your Pack
psux
crw - r - - - - rootrootrtc
Any guy on the list has encountered the aforesaid problem previously please
advise.
Thanks in advice.
B.R.
Stephen Liu
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
-At-Once
2. To select which write speed
a) 2 x (300KB/sec)
b) 4 x (600KB/sec)
c) 8 x (1200KB/sec)
3. Can I use CD RW disc for multi-record CDROM for software installation
4. How to check the recording condition of the CD after burning.
Thanks in advance.
B.R.
Stephen Liu
Want to buy your
.rpm
xmms-skins-1.0.0-11mdk.noarch.rpm
I checked RPMNet but could not find them there.
Kindly advise where can I have them downloaded.
Thanks in advance.
B.R.
Stephen Liu
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
result.
B.R.
Stephen Liu
At 09:55 AM 10/17/2001 +0200, you wrote:
i used to have problems like that till i found out the firewall (axxent) was
screwing around with the downloads
maybe u have a similar problem
- Original Message -
From: Stephen Liu [EMAIL PROTECTED]
To: [EMAIL
left in this runlevel
The PC hanged on forcing me to re-boot the PC
No improvement made after re-starting. I tried twice re-installing
Linnux-Mandrake 8.1 with the same result
Could any guy on the list shed me some light. Thanks in advance.
Best Regards
Stephen Liu
At 03:24 PM 10/4/2001
re-installing
Linnux-Mandrake 8.1 with the same result
Could any guy on the list shed me some light. Thanks in advance.
Best Regards
Stephen Liu
At 09:01 PM 10/4/2028 +0800, you wrote:
try to change your Mandrake CD try buying agai.that is the good part of
Linux it is
very
Stephen Liu
At 11:30 AM 10/2/2001 -0700, you wrote:
Dear Sir Stephen Lui
before adding a / linux native root partition just add first a native
partition
/boot with 5MB needed then after press add again for the swap partion
your swap
partion must be 2x your memory so for example you have 64mB
Stephen Liu
At 11:30 AM 10/2/2001 -0700, you wrote:
Dear Sir Stephen Lui
before adding a / linux native root partition just add first a native
partition
/boot with 5MB needed then after press add again for the swap partion
your swap
partion must be 2x your memory so for example you have 64mB
necessary ?
Thanks in advance.
B.Regards
Stephen Liu
which you originaly configured so it will not conflivt with your existing
linux native.
then dont forget to add a swap partition.
I hope my little knowledge on this can help you.
Respectfully
AOL
www.aolsystems.com
The Technology Specialist
Regards
Stephen Liu
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hi all people,
Has LyX already been pre-installed in Mandrake 7.2 ? If Yes how to evoke
it, from KDE or Gnome ?
Kindly help. Thanks in advance.
Stephen
Hi all people,
I have a CDROM and a CDWriter installed running Mandrake 7.2. Using KDE
desktop I create an icon for CDROM with following steps;
right click on KDE desktop Create New CDRom device Device
in Device drop-down list - select /mnt/cdrom
in Mount Point - select /mnt/cdrom
Hi all people,
I have a CDROM and a CDWriter installed running Mandrake 7.2. Using KDE
desktop I create an icon for CDROM with following steps;
right click on KDE desktop Create New CDRom device Device
in Device drop-down list - select /mnt/cdrom
in Mount Point - select /mnt/cdrom
Hi all people,
Has LyX already been pre-installed in Mandrake 7.2 ? If Yes how to evake
it, from KDE or Gnome ?
Kindly help. Thanks in advance.
Stephen
Hi all people,
I have a CDROM and a CDWriter installed running Mandrake 7.2. Using KDE I
create an icon for CDROM with following steps;
right click on KDE desktop Create New CDRom device Device
in Device drop-down list - select /mnt/cdrom
in Mount Point - select /mnt/cdrom
File System
Hi all people,
Re Installation of Mandrake 7.2 on ATA 100 hard disc
I'Will WO2 onboard controller
From MSWindows Settings Control Panel System Device Manger
Storage Contoller Resources, following data were found :
a. Input/Output Range 01F0 - 01F7
b. Input/Output Range 03F6 - 03F6
Hi Charles,
Could you please throw me some light re installation of Mandrake 7.2 on ATA
100 hard disc
I'Will WO2 onboard controller
From MSWindows Settings Control Panel System Device Manger
Storage Contoller Resources, following data were found :
a. Input/Output Range 01F0 - 01F7
Hi Dan,
Kindly advise :
Use the standard IDE interfaces for now. Apparently there is a way to
make it work on 7.2 but even so it's still "buggy".
Is it using IDE cable for ATA33/ATA66 to connect the ATA100 hard disc first
before installation ?
Try installing your O/S using the stabdard
Hi all people,
Kindly advise:
How to burn CD RW in Mandrake 7.0 Can it support UDF burning and reading ?
Thanks in advance.
B.R.
Stephen
50 matches
Mail list logo
