-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thursday 17 October 2002 3:10 am, John Richard Smith did speak unto the
huddled masses, saying:
My fstab has an entry like this
none /proc proc defaults 0 0
none /proc/bus/usb usbdevfs defaults 0 0
but each time I boot I get an error
shane wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thursday 17 October 2002 3:10 am, John Richard Smith did speak unto the
huddled masses, saying:
My fstab has an entry like this
none /proc proc defaults 0 0
none /proc/bus/usb usbdevfs defaults 0 0
but each time I boot I get
Anne Wilson wrote:
My usb printer is often falling out of USB hub view, so reluctantly I
have to
reboot for mandrake to find it again which annoys me. There ought to
be a command that would tell the OS to redetect it again, to save
time and effort.
John
Just as a matter of
Brian Parish wrote:
On Mon, 2002-10-14 at 10:22, Marcia wrote:
By the way, during reinstall of LM9 I accidently lost my choice of win95
which I had already installed. I forgot how to get it back without
erasing LM. What did one do again to get lilo to boot windows again?
Thanks,
Marcia
On Sat, 12 Oct 2002 20:33:00 -0500
Linus Drouhard [EMAIL PROTECTED] wrote:
I finally did the obvious and reinstalled 9.0. That fixed my printing
problem. I may never know what the problem was (and really won't care as
long as it doesn't happen again.) I really wanted to discover the
Smiley wrote:
On Sat, 12 Oct 2002 20:33:00 -0500
Linus Drouhard [EMAIL PROTECTED] wrote:
I finally did the obvious and reinstalled 9.0. That fixed my printing
problem. I may never know what the problem was (and really won't care as
long as it doesn't happen again.) I really wanted to
Anne Wilson wrote:
On Sunday 13 Oct 2002 3:52 pm, you wrote:
Smiley wrote:
On Sat, 12 Oct 2002 20:33:00 -0500
Linus Drouhard [EMAIL PROTECTED] wrote:
I finally did the obvious and reinstalled 9.0. That fixed my printing
problem. I may never know what the problem was (and
Linus Drouhard wrote:
I finally did the obvious and reinstalled 9.0. That fixed my printing
problem. I may never know what the problem was (and really won't care as
long as it doesn't happen again.) I really wanted to discover the problem
and fix it rather just a clean install, but, as
On Mon, 2002-10-14 at 10:22, Marcia wrote:
By the way, during reinstall of LM9 I accidently lost my choice of win95
which I had already installed. I forgot how to get it back without
erasing LM. What did one do again to get lilo to boot windows again?
Thanks,
Marcia
Marcia,
You need
I finally did the obvious and reinstalled 9.0. That fixed my printing
problem. I may never know what the problem was (and really won't care as
long as it doesn't happen again.) I really wanted to discover the problem
and fix it rather just a clean install, but, as someone else mentioned,
shane wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Monday 07 October 2002 11:51 am, Marcia did speak unto the huddled
masses, saying:
related? i have no idea
http://www.mandrakeforum.org/article.php?sid=2459mode=threadorder=0
aside from that all i can say is that my styles
Marcia,
My syslog didn't have any of the errors that you reported. USB appeared to
load up just fine. I can see the printer with PrinterDrake as well as
USBView. Everything comes through except printouts. Apparently a whole host
of problems result in similar behavior. I'll keep
Dear Linus,
I tried printerdrake again and this time did the autodetect and got these
messages:
printerdrake
cupsd (pid 1346) is running...
parport_pc: Device or resource busy
rmmod: module parport_probe is not loaded
parport: Device or resource busy
modprobe: Can't locate module
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Monday 07 October 2002 11:51 am, Marcia did speak unto the huddled
masses, saying:
related? i have no idea
http://www.mandrakeforum.org/article.php?sid=2459mode=threadorder=0
aside from that all i can say is that my styles collor epson
On Monday 07 October 2002 09:08 pm, Linus Drouhard wrote:
Ok, I tried the noapic. Same problem. My USB was working before as I
was using a USB mouse. I still get USB port busy on the printer even with
noapci. I switched the mouse back to PS-2. Same error printing (or
trying to print).
I got it working again. I had changed some of the running items through
Mandroke Control center. I turned off things I didn't think I needed.
Apparently I turned off too many. I restarted the ones that I had stoppled
and printerdrake started and ran just fine. Thanks for all the
Wrongo! I thought I had it solved as I got a test page. That was all I got.
Everything else gets stuck in queue with usb port busy error. Any ideas at
all? I'm just about to dust off my 8.2 disks. It's a shame too, as there's
a lot to like in 9.0.
Linus
On Sunday 06 October 2002 11:37
Linus Drouhard wrote:
I got it working again. I had changed some of the running items through
Mandroke Control center. I turned off things I didn't think I needed.
Apparently I turned off too many. I restarted the ones that I had stoppled
and printerdrake started and ran just fine.
Marcia,
Run PrinterDrake through the console. You will get extra messages there that
you don't get through the Mandrake Control Center. I'll bet that your
getting the following messages.
rmmod: module parport_probe is not loaded
modprobe: Can't locate module parport_probe
modprobe:
19 matches
Mail list logo