Well, I kicked out WindowsME from my little laptop and tried installing LM
8.0.
Shockingly, the install worked the first time with proper display. I created
my two accounts (root and user) I set up my audio properly and got the
introduction music play smoothly. This is the first Linux distro
On Sunday 15 July 2001 16:05, civileme wrote:
On Sunday 15 July 2001 04:06, David Peerless wrote:
I've been searching through the archives to no avail so I hope
someone can help...I apologize if this has been covered before...
I have a Promise ata/66 card that I can use with LM 8.0 by
I tried to to a clean install of LM 8.0 powerpak (from BestBuy). CD-1 is read and the
install proceeds. Then it asks for CD-2 which I insert and click ok. But it keeps
asking for CD-2 whenever I click ok. When I click cancel, it then asks for CD-3, CD-4
with the same results. I took the
Title: RE: [newbie] LM 8.0 install disks
Jerry, try installation in expert mode. It will ask for partitions maybe and other stuff that should not be a problem if you have used LM 7.2 or others, otherwise you can just accept most of the stuff as default. You will have to pick the packages
OK, I have tried LM 7.0, 7.2, and now 8.0. (purchased the power pack editions
of 7.2 and 8.0 at best buy stores in Charlotte NC). I believe it was worth
every penny each time. now in truth, i do not have any reason for even having
a computer, but I have three or four running in this house,
I have an IBM ThinkPad 1450 with Swedish keyboard layout. Graphics is a
Neomagic chipset with 2 megs. It has a trackpoint pointing device.
Furhtermore it has USB and a 3Com Ethernet PC-card. Installing previous
Mandrake versions (and Stormix) met with no difficulties on this machine.
having just done some surfing i have discovered that midi doesn't seem to
work for me, i have a sb live value and wavs amd mp3s work fine, i read on
expert archives a reference to making /dev/sequencer a symlink to /dev/midi0,
but my /dev/sequencer is a device file in its own right, should i
Hi,
the early Cyrix processors generated lots of heat. When I went through
my Socket 7 CPU upgrades, the largest heatsink/cooler I'd ever bought
was for my Cyrix P166+ (133MHz). The system simply kept hanging with my
other more normal-sized coolers. So cooling might be the issue here.
Hope
My system is a Cyrix 150Mhz with 64mb Ram
Linux Mandrake 8.0 hangs sometime.
In Bios PNP+APM is off
I have try: kernel-2.4.3-20mdk.i586.rpm and 2.4.4
Please help me..
Herbert
Previously I could smoothly install LM 7.2. Now, I can't install LM 8.0
because system freezes at X server configuration and system is a mess
after reset (only hardware reset works). I can upgrade from LM 7.2 but I
don't like garbage from previous installation (empty links and icons
etc.). I
It was Mon, 14 May 2001 18:52:18 +0200 when artwi wrote:
Previously I could smoothly install LM 7.2. Now, I can't install LM 8.0
because system freezes at X server configuration and system is a mess
after reset (only hardware reset works). I can upgrade from LM 7.2 but I
don't like garbage
On May 14, 2001 01:23 am, you wrote:
Boy, and I thought my VooDoo 5500 was a pain to config in LM 8.0 for 3D
accel. I only wasted 2 days on the VooDoo to get it working - 6 days and
counting for my Matrox G450 so far (2nd machine btw).
I also have a Voodoo5 5500 AGP and cannot get 3D
To those of us that love xcdroast (0.98 alpha 8), and can't run it under LM
8.0: at www.xcdroast.org there is a work around: 1. just type: chmod -s
/usr/bin/xcdrgtk and 2. install cdrecord 1.9. That's all. For me, works fine.
Carlos
Boy, and I thought my VooDoo 5500 was a pain to config in LM 8.0 for 3D
accel. I only wasted 2 days on the VooDoo to get it working - 6 days and
counting for my Matrox G450 so far (2nd machine btw).
I've read all of the threads on the Matrox forum pages, and no one else seems
to have
Dear friens:
Thanks to the great troubleshooting efforts of Pierre Fortin, we have a
new halt file to replace the /etc/rc.d/init.d/halt file IN CASE YOU
HAVE HAD A PROBLEM SHUTTING DOWN YOUR SYSTEM.
If your shutdown works fine, i.e. without any error messages, with all
OK check marks and
On Friday 11 May 2001 03:44 am, you wrote:
Dear friens:
Thanks to the great troubleshooting efforts of Pierre Fortin, we have a
new halt file to replace the /etc/rc.d/init.d/halt file IN CASE YOU
HAVE HAD A PROBLEM SHUTTING DOWN YOUR SYSTEM.
All the best.
Benjamin
Hi, I tried the file,
On Wednesday 09 May 2001 16:44, KompuKit wrote:
Well...I finally upgraded...to 8.0 from 7.2
and I love it...great job mandrake !!!
everything went without a hitch...except one thing...
I bought a CD set from cheapbytes...
so, I assume they are the download version.
I have a Pentium 233
Well...I finally upgraded...to 8.0 from 7.2
and I love it...great job mandrake !!!
everything went without a hitch...except one thing...
I bought a CD set from cheapbytes...
so, I assume they are the download version.
I have a Pentium 233 MMX, 64 mg Ram
Installed 8.0 on a Maxtor 20 gig HD
(dual
Lastnight i tried to install LM 8.0 on my laptop
IBM ThinkPad 380XD
P233
Neomagic graphic card
64MB RAM
4GB HD
Ethernet card
USB port
Serial and parallel port
Toshiba CDROM
I booted directly from the CD, installation started fine at first, but i
couldn't get the mouse to work properly... i
Dear friends:
Where in the world is MandrakeUpdate in LM 8.0, please? And Drakfont?
Thanks so much.
Benjamin
--
Sher's Russian Web
http://www.websher.net
Benjamin and Anna Sher
[EMAIL PROTECTED]
On Friday 04 May 2001 15:46, Benjamin Sher wrote:
Dear friends:
Where in the world is MandrakeUpdate in LM 8.0, please? And Drakfont?
Thanks so much.
Benjamin
DrakFont is in the control Center. MandrakeUpdate has been merged with
rpmDrake and the package rewritten to be much faster and
PROTECTED] wrote regarding Re:
[newbie] LM 8.0 (and KDE and otherwise) woes:
Where'd the root tux icon go on startup? I kinda liked him...
topher says: Indeed, I had the same question. If you are using the
'gdm' login screen, you should edit '/etc/X11/gdm/gdm.conf' and take 'root'
out
Konqueror gives an error everytime you access an https page, probably
because it was compiled for a different version of openssh than is
provided in LM 8.0. The message given is The process for $WEBPAGE died
unexpectedly. Try for instance www.usaa.com.
LILO keeps messing with my partition
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Erich Enke [EMAIL PROTECTED] writes:
snip some very accurate problems
Where'd the root tux icon go on startup? I kinda liked him...
topher says: Indeed, I had the same question. If you are using the 'gdm' login
screen, you should edit
I'm also getting stuck on the install. Putting MDK8 on a Toshiba
notebook, a Tecra 8000. I have now burned about 6 disks, from two
different downloads and I'm trying to grab one more as I write, just
to be sure.
I was able to build a boot floppy and the process proceeds nicely
until it
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of [EMAIL PROTECTED]
Sent: Thursday, April 26, 2001 6:33 AM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] LM 8.0 install
I'm also getting stuck on the install. Putting MDK8 on a Toshiba
notebook
hi
i downloaded iso images of LM 8.0 . during full install(expert mode) i noticed that
the installer never asked me if i have the extention cd or not. even after
installation when i tried installing packages from extention cd , it failed because
the package is already installed.
that is the
Marcia,
I think the latest release of Mdk8.0 is beta 3. Last I heard the final
release was scheduled for June.
--
Mark
*
"what knowledge I have managed to accumlate over the years
at times becomes obscured and even hidden amidst the vast
emotional onslaught of my children. You never
: Saturday, April 21, 2001 5:04 AM
To: Newbie List
Subject: Re: [newbie]LM 8.0
Marcia,
I think the latest release of Mdk8.0 is beta 3. Last I heard the final
release was scheduled for June.
--
Mark
*
"what knowledge I have managed to accumlate over the years
at times be
Dear All, Is LM 8 officially out yet? What is different about it and
would it be worth upgrading from 7.2 to 8? Thanks for your info.
Sincerely, Marcia
30 matches
Mail list logo