Hi everyone
I installed multisync from MDK 10.1 and there doesn't seem to be any
evolution plugin there. Neither are they in /usr/lib/multisync/ nor anywhere
else. I have contrib, plf and the Official DVD as sources but still get no
evolution-multisync stuff. Anyone has a clue?
Any advice
. What should I do
to get that option in Multisync 0.81?
I'm using Mdk 10 Official and supported usb bluetooth adapter...
Thanks for any advice.
Regards,
Marcio Cordero
--
Sie haben neue Mails! - Die GMX Toolbar informiert Sie beim Surfen!
Jetzt aktivieren unter http://www.gmx.net/info
: modprobe: Can't locate module snd-card-6
localhost modprobe: modprobe: Can't locate module snd-card-7
...
Does anyone have a clue? Could it have to do with the updated ISOs from
mandrakeclub?
I could send my complete /etc/modules.conf or dmesg output if desired.
Any help very welcomed.
TIA, Marcio
...
There it is: pcmcia stuff again. I know I could compile linux-wlan-ng from
source and the configure it to not compile the pcmcia drivers but I'd prefer
to have a rpm I can later erase. If there's a simple step I'm missing, please
let me know.
Thanks a lot in advance.
Marcio Cordero
--
+++ GMX - Mail
put ifup eth0 in
/etc/rc.local.
That should bring it up automatically whenever you reboot.
At 12:39 AM 1/15/2002 +0100, Marcio Cordero wrote:
Hi all,
I have this small problem. I have a Micronet 10Mbps pcmcia ethernet card.
It
got recognized during installation. But now, it doesn't get
reason, please let me know. I guess it hasn't
anything to do with cooker because I had the same problem with LM 8.0 and after
reinstaling (with the network up) all was magically OK again...
TIA,
Marcio Cordero
--
GMX - Die Kommunikationsplattform im Internet.
http://www.gmx.net
Want to buy your
perfectly. Could it be
it isn't trying to start it at all?
If you need any X-server output, just let me know.
Thanks in advance,
Marcio Cordero
P.S: the pilot mouse did work using PS/2 adaptor on an older machine, but it
doesn't on this one, does anyone know what I could do or where to report
/interrupts, once I see eth0 and the sound
card and then half an hour later I only get the ethernet card.
Device 00:09.0 ist an ethernet card by the way...
Do I have an IRQ problem? Or could it have something to do with the winmodem
I took out of the pc?
Thank in a advance,
Marcio Cordero
--
GMX - Die
:
Fujitsu Lifebook 656Tx, P150MMX, 48MBRAM.
Thank for any help,
Marcio Cordero
--
GMX - Die Kommunikationsplattform im Internet.
http://www.gmx.net
--
GMX Tipp:
Machen Sie Ihr Hobby zu Geld bei unserem Partner 11!
http://profiseller.de/info/index.php3?ac=OM.PS.PS003K00596T0409a
a floppy image
copied to the HD. If somebody ever did it or has any concrete tip on how to
do it, I would greatly appreciate it... and if there isn't a way, also
please let me know so that I save buying the ethernet card...
Thanks,
Marcio Cordero
--
GMX - Die Kommunikationsplattform im Internet
Hi all,
after checking newgroups and the web with no significant answer, I post my
question here:
I tried to configure fetchmail with fetchmailconf and when I try fetchmail
-d0 -v -nosyslog, I get :
snip
reading message 1 of 33 (2224 octets)
fetchmail: timeout after 300 seconds waiting for
card? Do I have a corrupted version of Xfree? Or is it some
mistake in the resolutions? Any help will be greatly appreciated.
Thanx
Marcio Cordero
Marcio, you didn't mention what color resolution you were trying. I have seen
problems with xserver if you have colors set to high or res
t then the test screen at X config. didn't even show up
("device busy..."). Did anybody experience something similar, maybe with
another card? Do I have a corrupted version of Xfree? Or is it some
mistake in the resolutions? Any help will be greatly appreciated.
Thanx
Marcio Cordero
13 matches
Mail list logo