Derek Jennings wrote:
On Monday 10 May 2004 10:56, Raffaele BELARDI wrote:
I installed 10.0 official. I have a azt2320 ISA soundcard
I added to /etc/modprobe.preload the snd-azt2320 line. Sound modules are
loaded correctly at boot, but /dev/dsp is not created so xmms and
mplayer don't generate
Ron Hunter-Duvar wrote:
Check /var/log/messages for any messages from the kernel concerning your sound
card. If there's anything in there recommending a different driver, try that
driver. If not, then, well, see if you can find out somewhere else what
driver might work (try google of course).
I installed 10.0 official. I have a azt2320 ISA soundcard, which worked
fine in 9.x and 8.x
I added to /etc/modprobe.preload the snd-azt2320 line. Sound modules are
loaded correctly at boot, but /dev/dsp is not created so xmms and
mplayer don't generate sound. If I manually create the /dev/dsp
On Monday 10 May 2004 10:56, Raffaele BELARDI wrote:
I installed 10.0 official. I have a azt2320 ISA soundcard, which worked
fine in 9.x and 8.x
I added to /etc/modprobe.preload the snd-azt2320 line. Sound modules are
loaded correctly at boot, but /dev/dsp is not created so xmms and
mplayer
Ciao a tutti.
Spero tanto che sappiate rispondere al mio quesito...
Ieri, lavorando alla costruzione di un linux minimale, ho erroneamente
cancellato (quasi tutta) la directory /dev!! (Dovevo cancellare la dir dev di
un'altro filesystem in fase di costruzione)
Non sapendo bene cosa fare, ho
Mi rispondo da sola...
Posso quindi anche riavviare il computer senza il rischio che mi si impianti al
boot?
Si'! =)
Altra domanda: ho notato che i dispositivi presenti in /etc/fstab sono stati
ricreati tutti ad esclusione di /dev/cdrom. Perche'? Come posso fare per
farglielo ricreare?
In un altro luogo e in un altro tempo, Di Fresco Marco esclamo':
/dev/dsp: Device or resource busy
Could not open /dev/dsp
a dsp0. dai un lsof _nome-dispositivo_, molto probabilmente c'e'
qualcosa che gia' lo occupa.
Mi dice che il comando (lsof) non esiste; ho provato a cercaro nel
In un altro luogo e in un altro tempo, Di Fresco Marco esclamo':
Mi dice che il comando (lsof) non esiste; ho provato a cercaro nel
Software Manager, ma nei CD non lo trovo. Dove potrei trovarlo
Non mi viene in mente in quale cd sia, cmq ci dovrebbe essere (nel
pacchetto omonimo), altrimenti
In un altro luogo e in un altro tempo, Di Fresco Marco esclamo':
/dev/dsp: Device or resource busy
Could not open /dev/dsp
[..]
Cosa vuol dire? cosa devo fare per liberare /dev/dsp e farlo usare da
Quake2? Faccio presente che la shell dove avvio il comando, e' l'unico
programma aperto quindi
Ciao a tutti,
sto cercando di usare la versione linux di Quake2, pero' ottengo il seguente
messaggio di errore:
[root@localhost quake2]# ./quake2
usage: set variable value [u / s]
Added packfile ./baseq2/pak0.pak (3307 files)
Added packfile ./baseq2/pak1.pak (279 files)
Added packfile
Dear All,
I downloaded a MIDI file a couple of weeks ago and played it with no problems
using kmid. Then yesterday I downloaded some .kar files and tried to play
them and when I tried kmid I got a message that /dev/sequencer could not be
opened. I then tried the MIDI file that I had
Hi!
I've deleted /dev/scd1 and it's where my ide DVD was redirected using
hdc=ide-scsi in /etc/lilo.conf -i've got a scsi cd recorder at
/dev/scd0-.
What commands do i have to pass mknod to create it again?
Thanks! ;)
--
Joan Tur. Ibiza - Spain
[EMAIL PROTECTED] [EMAIL PROTECTED]
On Thursday 28 June 2001 23:50, Joan Tur wrote:
Hi!
I've deleted /dev/scd1 and it's where my ide DVD was redirected using
hdc=ide-scsi in /etc/lilo.conf -i've got a scsi cd recorder at
/dev/scd0-.
What commands do i have to pass mknod to create it again?
Thanks! ;)
--
Joan
Ciao,
ho un problema quando lancio kmid (per sentire i file midi). Se lo lancio da
console ottengo
[alberto@master alberto]$ kmid
[1] 1582
[alberto@master alberto]$ KMid 2.0 Copyright (C) 1997,98,99,2000 Antonio
Larrosa Jimenez. Malaga (Spain)
KMid comes with ABSOLUTELY NO WARRANTY;
A few days ago I installed Mandrake 7.0 from a cdrom disk purchased
at Cheapbytes.com. All seemed to go smoothly but a couple of
problems have developed.
First: When I bootup I always get the message: "/dev/hda3 not
cleanly unmounted, check forced" and then it goes through the
process. I have
Can someone tell me the obvious mistake I am making !
I have L-M 6.1 Helios
I have setup printers on RH and L-M before, However the properly
connected printer, used before the 6.1 upgrade is not being detected
when I attempt to "add printer" in printtool?
The conf.modules has the line I
I know I can play sounds with from the command line with "cat sound
mywav.wav", but is there a way to manipulate the mixer from the command line
also? The sound is very low when first initialized and the only workaround I
have so far is to enter X and use its mixer.
Thanks,
Scott
On Fri, 17 Sep 1999 [EMAIL PROTECTED] wrote:
I know I can play sounds with from the command line with "cat sound
mywav.wav", but is there a way to manipulate the mixer from the command line
also? The sound is very low when first initialized and the only workaround I
have so far is to
Gustavo Viola wrote:
Hi,
Bash tells me it doesn´t recognize the "make" command. I assume that is
so
because I neglected to install development packages at setup... Does
anyone
know where to find the proper RPMs in the 6.0 dist. cd?
Mandrake/RPMS
--
Steve Philp
Hi,
Bash tells me it doesn´t recognize the "make" command. I assume that is
so
because I neglected to install development packages at setup... Does
anyone
know where to find the proper RPMs in the 6.0 dist. cd?
Mandrake/RPMS
--
Steve Philp
Network Administrator
Advance
Hi,
Bash tells me it doesn´t recognize the "make" command. I assume that is so
because I neglected to install development packages at setup... Does anyone
know where to find the proper RPMs in the 6.0 dist. cd?
Thanks in advance,
/Gustavo Viola ß^»
21 matches
Mail list logo