Hi all,
I am newbee in NS-2 and doing project on networking. I want to see the
output of the attached file, but it is giving compilation error. can you
please tell me what is _o244 cmd line 1, and how to solve the problem.
thanking you,
Hi,
i have to get the neighbor table from aodv in mac802-11.cc file,
how it can be done in ns2.35.awaiting the answers its urgent
thanks
--
View this message in context:
http://network-simulator-ns-2.7690.n7.nabble.com/urgent-how-to-get-neighbor-table-in-mac-layer-tp28827.html
Sent from
can anyone send me the awk script to calculate bandwidth for wireless in
ns2.34??
--
Reagards.,
R.Abinaya,B.Tech,(M.E)
Hi,
If you are interested in learning how tracing works in NS2, please read
http://www.ns2ultimate.com/post/3995318343/post-processing-ns2-result-using-ns2-trace-main-post
Best Wishes,
Teerawat Issariyakul
http://www.ns2ultimate.com/
Dear All,
I was running successfully ns-2.31 on ubuntu10.10. I had to perform some
modifications in C++ code. When i made simpler changes. During make
command execution it gives error in one_phase_pull.cc which i did not modify
even for single line. Can you guide me why this problem has arose
Dear Ns2 users
I have been trying to learn how to simulate wireless sensor network on
NS2 using Directed Diffusion as the routing protocol but till now all
the presented examples with the program deals with the ping sender and
receiver without mentioning how the matching mechanism and the data
dear ns-user,
I need your help in implementing the wormhole attack in ns2.34 using this link
http://web.njit.edu/~crix/software/wormhole.html
Which commands that enable the various wormhole attacks in the Tcl file in
order to run OLSR protocol in a wormhole environment?
Thanks a lot.
Hi .
I need an urgent help. Actually, if there are two base stations such that a
mobile node is moving from Base station to another, then how to know, under
which BS, mobile node is connected ? How to know while writing in c++ in
ns2.
Thank You,
Sushma.
hello...
I am working on the WSN.Please send me LEACH sorce code for ns2.
parameters are those i m working...
a) network deployment areas are 50×50 and100m×100m
b) initial energy of each sensor node is 1 Joule
c) sensor nodes are randomly deployed in the given area
d) each tree is used for 10
I'm using the following configurations - WirelessChannel, TwoRayGround,
OmniAntenna, 802_11, AODV routing protocol. I want a perfect wireless data
transfer. That is, no collisions , no packet drops, etc... what a node sends
MUST be received by the desired destination node. If perfect is not
I am trying to create a video file by the command exec ./etmp4 -p -0 sd_1
rd_1 st_a01 a01.mp4 a01e in a tcl script.
but, when I run it- the video files weren't created by the tcl script.
When I tried to run it from the console the video files were created,but
with the output aborted in the end:
Dear Ahmed i remember reading a similar post in the mailing list that
provides the answer, you should find it if you search thoroughly.
cheers , Fivos
On Thu, May 5, 2011 at 6:02 PM, Ejaz Ahmed Awan ime...@gmail.com wrote:
Dear All,
I have ported the PUMA(multicast routing protocol) code
Hi
I want to install the IEEE 802.11p in ns2.
Can any body help me, and give me a link to download the package.
Please I need help it is very urgent
thank you,
Best regards,
Chadi Jabroun
Dear All,
I have ported the PUMA(multicast routing protocol) code to multi radio
multi channel (crcn patch ) in ns-2. My example script gives an error in
ns-mobilenode.tcl on execution of code
// code is in ns-mobilenode.tcl which is already available in ns-2
if {$numIfsSimulator!=} {
Hello everyone,
I want to use shadowing model with transmission range 100m. so I think I need
to use threshold to calculate RxThershold. I have compiled it truly but I don't
know What should I do after that to calculate the transmission range.
Can anybody help me?
Thanks in advance
Best
1.how to add specific route entry in the routing table
2. how to forward a packet to specific node from a node in the path
hey if u know please do help me...
anand
hi
I'm currently working on my final
project in which i should create a node moving from one base station to
another.
I have a problem in creating the handover between two base station.
My topology is as follows:
-
|
Dear all,
I want to apply packet node failure in a WSN in NS2. so I want to remove some
nodes in a specific time in my simulation. (for example we have a fire in a
place and this cause some nodes die before finishing their energy). Does
anybody
have a suggestion?
Thanks in advance,
Parisa
hi
I want to create a handover scenario, between 2 base station, using an
extension of the mac 802.11 : Mac/802_11Ext
i have created the scenario, but the mobile node can not connect to the
second base station during the handover process.
my tcl script is the following:
#802.11p
hi Ns users
hi friends ,i am doing a project on cooperative caching in
wireless network. for this i craete a network with 5 nodes. i want to cache
the data, i am new to NS2. how can i do it and i have some more doughts.
My doughts are
1. during the runtime (simulation) i need to
Thanks .
This tool is a good help for referece purposes.
Appreciate the help
On Fri, Jan 28, 2011 at 5:30 PM, kdcorp khalidst...@hotmail.com wrote:
You can use this great tool TCL Script Generator to generate NS2 script
via
a java GUI, very useful
Hi Anoop,
As you said you have already generated the traffic file and scenario file
from the internal script provided in NS-2 installation than in your tcl
script there is no use to mention the below lines, you can simply scrap
these lines from your TCL script:
# Provide initial location of
salam,
ok, looking at your configuration file, we can see that you forgot to give
the other nodes positions.
look at this section :
for {set i 0} {$i $val(nn) } { incr i } {
set node_($i) [$ns node]
$node_($i) random-motion 0; # disable random motion
}
# Provide initial
Hi Fellow ns2 users,
I am pretty new to NS2 and need to learn it for my Thesis.
I am trying to simulate AODV in ns2.34. It worked fine for a 3 node example
where I could simply give the node positions and work it out.
However, i am now trying to modify the 50 node example ( wireless.tcl) for
dear all,
I receive in my log file the following message:
At 9.525694049 Mac 5 (Node 3.0.1) drop packet because does not belong to bss_id
-1 (hdv_state_=1)
When I grep this error in mac_80211 I see that my MN is not attached at all to
the BS:
case MAC_Type_Data:
//NIST: add L2
Hello, i a have a problem
I encountered some problem when I start simulating the AOMDV in WSN.
The error message after running ns is the following:
check_pktTx:Invalid MAC Control subtype
I am using ns2.34 and I am trying to add malicious node in the network
following this post
hi guys really need help here, i been simulation dsr aodv by varying the
number of network load, then i calculated the end to end delay, however the
result isnt what i expected, it begins with high delay with lowest
trafficload, then it goes down and up again forming a U shape trend. how
could
Hello everyone,
I need to access the prev_hop_ filed of the data packets, in order to
update some protocol states in my program.
I am using the OLSR routing agent. And I have already checked the recv() and
forward_data() functions, there is no sign that the 'prev_hop_' field is set
or modified
Any help from anybody
--- On Mon, 9/8/10, ikenna ajere ajer...@yahoo.co.uk wrote:
From: ikenna ajere ajer...@yahoo.co.uk
Subject: [ns] URGENT HELP ON RPGM pl!
To: ns-users@ISI.EDU
Date: Monday, 9 August, 2010, 0:00
Hello,
I need an urgent help on something;
I want to disenable
Hello,
I need an urgent help on something;
I want to disenable intra group communication in Reference Group Mobility
(using bonn motion) and allow only inter group communication but I dont know
how to do it, but I believe it's possible. Pls can anyone be of help to me?
Below is a .params ext
Al Salamo Alikom
Dears,
I am in a bad need for Multipath On-demand Routing (MOR) protocol source
code in NS2.34 for WSN.
Please send me a patch or the NS version number wherever it is implemented
or any material that may help or the contacts of the authors.
Thanks in advance
Mariam
P.S. A
hello
i change the following in tcl script
##configure traffic
set i 0
set tcp($i) [new Agent/TCP]
$tcp($i) set class_ 2
$tcp($i) set packetSize_ 1240
#create video traffic
set ftp($i) [new Application/FTP]
$ftp($i) set packetSize_ 4960
$ftp($i) set interval_ 0.1
$ftp($i) attach-agent
Dear Users,
I am using NS2.34 for my final year project.
I want to know How can I broadcast a packet to all my neighbors within 1
hop? Can you help me?
I have the following nodes:
- - Node 1
Node 0 - -
- - Node 2
I want Node 0 to send the packet to both Node 1
set udp1 [new Agent/UDP]
$ns attach-agent $n0 $udp1
set udp2 [new Agent/UDP]
$ns attach-agent $n0 $udp2
set src1 [new Application/Traffic/CBR]
$src1 attach-agent $udp1
set src2 [new Application/Traffic/CBR]
$src2 attach-agent $udp2
set null1 [new Agent/Null]
$ns attach-agent $n1 $null1
set
Dear NS2 users,
I'm trying for a given wireless link to calculate the SINR. Has anyone
already done it before ? do I need the dei80211mr mac extension or could it
be done using the default mac 802.11 implementation bundeled with NS 2.34 ?
Best regards
--
KOULALI Mohammed-Amine
Dear NS2 users,
I'm doing a simulation on NS2 and I keep getting my packets dropped next is
the trace I'm getting (D 21.03200 _19_ IFQ ARP 898 cbr ...) It seems
that arp drops my packets if the number of packets for a same destination is
more than 3.
Is there any solutions ?
Thanks
Here's a copy:
http://www.cs.huji.ac.il/labs/danss/sensor/adhoc/tseng_2003onroutelifetime.pdf
Regards,
John
Rishi Kumar wrote:
Does anyone have a copy of On route Lifetime in MultiHop Mobile Ad-hoc
networks, by Tseng Y, Li Y. and Chang Y.
Please send me a copy asap.
Thanks in
Does anyone have a copy of On route Lifetime in MultiHop Mobile Ad-hoc
networks, by Tseng Y, Li Y. and Chang Y.
Please send me a copy asap.
Thanks in advance !
Hi Everyone ,
I am working with active network concept in ns-2.
I got the link to get the package for active network for reliable multicast on
tascnet.com/PANAMA. I have searched a lot but now it is not found .
also I want to know which ns version is suitable for it.
If anybody knows please
Hello ,
I need a active network reliable multicast package
anRMpkg.tar which was priviously availabe on PANAMA link
now not found .
Please ,please help me to get it.
I request if anybody have it pl. forward to me
Best regards,
AABHA
Hi,
I am trying to simulate a problem of wireless networks (code snippet given
below) using Ricean Propagation Model,but on trying to run, I am getting error:
invalid command name Propagation/Ricean (detailed error given below)
For removing the error, i tried the following steps
1)Applied
Dear all,
I am designing an Active Queue Management algorithm in ns2.
Basically, a packet enters the system and my algorithm is supposed to decide
whether to place the packet in the queue or drop it according to some criteria.
I need to know the congestion window value of a TCP flow, how could
Hi All,
Please let me know how can I calculate number of collision for ZigBee in
ns2.
If any one has any code please send me.
--
With best regards,
Pratiti
Hello ns users,
I am not able to simulate SCTP protocol for the delay of 800 seconds, i am
providing my TCL script please help regarding simulation using point to point
communication using single stream, multistream and multihoming and where to
modify in the code plsase tell me it is
Note: Forwarded message attached
-- Original Message --
From: venkatesh NB [EMAIL PROTECTED]
To: Daniel Rosenthal [EMAIL PROTECTED]
Subject: Re: Re: [ns] Urgent requirement redarding SCTP Protocol propagation
delay increasing to 800 seconds
venkatesh N B
#331 judicial layout,
22 nd
hi ns2 users,
can any one help me to understand the command of queue monitoring
$ns_ monitor-queue n1 n2 optional: qtrace optional:sampleinterval
and how can i use the handler of the queue average size.
please help me,
thanks in advance,
Mona
Hi All,
I am facing a serious problem when I run NS-2 simulations of IEEE
802.11bextending over 200 seconds with cbr traffic rate of each node =
11Mbps and
number of nodes = 50.
The process is killed after around 100 seconds of simulation. This occurs
even if I turn off all traces.
Any clues
hello all
Somebody might like to respond to this urgent call to understand error
conditions over a WLAN channel. I need to have your point of views on
the statement:
Are channel conditions entirely summarized in error rates?
waiting for your responses...thanks
regards
b
Hello,
I need to install the multipath routing over NS, if u can help , please
contact me on : [EMAIL PROTECTED] or reply on this message,
It's urgent, PLZ
Best regards
--
View this message in context:
Hello,
I need to install the multipath routing over NS, if u can help , please
contact me on : [EMAIL PROTECTED] or reply on this message,
It's urgent, PLZ
Best regards,
--
View this message in context:
http://www.nabble.com/Urgent-%3A-installing-multiPath-in-NS-tp14276367p14276367.html
hi
i am trying to load ns-allinone-2.28 on my fedora core-4 linux..but this gives
me problem while making ns2 shows some file named xpcs something missing or
this can't find these files.
and then i tried to load this on current version of cygwin this loaded alright
gives no
Dear ns users,
please I need your HELP. I have the simulation multicast model, where is only
one source (I'm using Seesion/RTP) a number of receivers (Session RTP also).
Session/RTP class create one Agent/CBR/RTP (called dchan_) and one Agent/RTCP
(called cchan_).
Is the part of my script
I currently just started using the ns2.31, and am not that good with Otcl
scripting. I am trying to run the simple-wireless.tcl script, when I run it I
get
num_nodes is set 2
warning: Please use -channel as shown in tcl/ex/wireless-mitf.tcl
INITIALIZE THE LIST xListHead
Starting Simulation...
you can see wireless2.tcl to found nam running codes. and add those codes to
your script.
for define it:
set namtrace[open wireless2-out.nam w]
$ns_ namtrace-all-wireless $namtrace $val(x) $val(y) ( x y defined
above)
and in proc stop{} after close $namtrace add this:
Dear NS Users:
In my simulation, there are two wireless nodes MR and MH. The sender (FH) is
connected to the Base Station (BS). The BS is connected to MR via wireless
link. MR in turn connected with MH via wireless link. So, any packet
transmitted from BS must go through MR and MR will forward
Hi All,
Does anyone know where I can get the specs of (or any information about) the
test cases (Vehicular A/B, rayleigh...) implemented in the Matlab processes
for generating input trace files for HSDPA ?
Thank you in advance,
Imad Abdeljaouad
hi
i am looking for implementing multiple hopping in umts and come across this
text file that wireless node in ns are able to communicate using hops
The ad-hoc routing agent comes with the Wireless Nodes communicating over
multiple wireless hops. In the simulation of UMTS scenarios, a
Hello,
I am having the same issue. Did you managed to interpreter this trace file
and i so, what command did you use?
bageira wrote:
hi...i'm in urgent need of help with creating a trace graph from a trace
file.i'm using ns-2 and my code is for a wimax module. i have a trace
file of
Hello everybody,
let's suppose we want to encapsulate N small packets (each one with a certAin
UDP header and its corresponding data) into a UDP bigger one. Is any agent of
this kind already available in ns2?
Any tip would be greatly appreciated. Thank you very much in advance for your
help.
Hello evry body,
Who can help me please?
i search the MNS (MPLS network simulator) version for ns-allinone-2.31 or
other version for MNS
if u can help me?
_
Découvrez le Blog heroic Fantaisy d'Eragon!
Hi all
Can anbody provide me with the snoop.tcl as soon as possible or tell me how
to assign Snoop protocolto TCP traffic?
Thank you
Regards
-
Ahhh...imagining that irresistible new car smell?
Check outnew cars at Yahoo! Autos.
Hi all
Can anbody provide me with the snoop.tcl as soon as possible or tell me how
to assign Snoop protocolto TCP traffic?
Thank you
Regards
-
Ahhh...imagining that irresistible new car smell?
Check outnew cars at Yahoo! Autos.
Can anyone help me to install CBRP with CMU extention at
http://www.comp.nus.edu.sg/~tayyc/cbrp/
. I tried everything to install, i did everything in README and CHANGES
files in CBRP directory but i am unsuccessfull.İ use cygwin and
ns-allinone-2.30.I need help very urgent.Please help.
Best
Can anyone help me to install CBRP with CMU extention at
http://www.comp.nus.edu.sg/~tayyc/cbrp/
. I tried everything to install, i did everything in README and CHANGES
files in CBRP directory but i am unsuccessfull.İ use cygwin and
ns-allinone-2.30.I need help very urgent.Please help.
Best
Hi everyone!
I have been using new trace format for directed diffusion routing to
analysis my simulation. I am using Rmst source which transmit Blob at agent
level but I couldn't see the blob packets transmitted in trace files. Do
anyone have any ideas about diffusion trace format? I would
Hi everyone!
I have been using new trace format for directed diffusion routing to
analysis my simulation. I am using Rmst source which transmit Blob at agent
level but I couldn't see the blob packets transmitted in trace files. Do
anyone have any ideas aout diffusion trace format? I would be
hi,
I would like to know how to monitor the congestion while packets move from
the RNC in the wireless network to the wired network the code would really
help !!! thank you
yours,
sundar
-
No need to miss a message. Get email on-the-go
with Yahoo!
Hi everyone,
I want to know how to generate xgraph from tracefiles.I implement ad-hoc
routing protocols and i can produce tracefiles but i didn't understand how
can i plot the comparison graphics of these protocols with respect to
metrics:
*Packet delivery ratio, r**outing overhead, **path
Hi all,
I am working on ns2 and faced a problem in identifying
the node. i.e I want to know the id of the node in
C++.
to make more clear. When I am sending a packet, I want
keep the node id of the source and the destination
need to evaluate the node id before processing the
message.
So any one
Hi John and everybody:
Depending what you want:
You should use a generic utilities like: grep, awk, join, ...
To filter columns of the out.tr, you can use the 'column' program, that
you can found in the ns-2 website.
Maybe, you can use your own Perl programs, and finally, you can use
Dear all
how to analysis the out.tr?
Because it have many many column and rows.
thanks all
_
至醒搜尋和瀏覽網絡的免費工具列 — MSN 搜尋工具列
http://toolbar.live.com/
hi
i am trying eurane programming for ns2. i got every thing write except error in
tracing information regarding the transmission time of data from node. i some
of my program is following..
set f [open outmodified.tr w]
$ns trace-all $f
# Node address is 0.
set rnc [$ns
Hi nsusers,
I have a problem where i only want to transmit only a single packet from
source to destination and not multiple packets i want to restrict or limit
the no.of packets being transmitted can anybody tell is there any code or
command for getting this problem solved.
Plz help me your
Hi ns Users,
I am facing a problem of limiting the packets being sent for example
consider we send 10 packets from source(mobile node1) to destination(Mobile
node10) I have to limit the packets being sent from 10 packets to suppose 5
packets or 1 packet should be sent from source to destination
Hi ns users,
I am facing a problem in generating the node movement and traffic files from
examples in directory ~ns/tcl/mobility/scene/scen-670x670-50-600-20-* for
wireless networks and creating node movement files from examples in
~ns/indep-utils/cmu-scen-gen/setdest/directory
Can anyone
(i.e. address is 1) and port is 0 of receiver
32 = TTL
There are lot of books online, download them, they are free and look up 'Trace
Format'
Maruf
- Original Message -
From: Vijay Kumar c [EMAIL PROTECTED]
Date: Wednesday, March 14, 2007 10:24 pm
Subject: [ns] Urgent Help
Hi ns users,
I am facing a problem in analysing the Wireless trace file format.I have
given the exanmple below and tried to explain my problem for which i have
used *Bold Font*
Example:
r 40.639943 _1_ AGT --- 1569 tcp 1032 [a2 1 2 800] -- *[0:1 1:0 32 1] *[35
0] 2 0.
My problem is
Antoni
In saw that you are working with new wireless trace format. I wrote a small
program for my MS thesis to minimize the time of getting the results I
wanted for my research. It is written in java and I stopped wiriting the GUI
version to avoid having a fair large code. I can send it to you
Hi ns-users,
I have a problem in analysing the trace file where i want to know wheather
the same packet which i am sending from the source has reached the
destination.
For example if am packet1 which contains the word fun how can i examine the
packet has reached the destination to which i have
Dear all,
i try to investigate the reason of data packet drops in wireless scenario but i
have some problem
i dont know what is the difference between: Nl RTR Nw IFQ, and Nl IFQ Nw ---
Also what is the meaning of Nl RTR Nw CBK
THANKS in advance
Hi nsusers ,
How to filter the traces or information of routing protocol and
acknowlegement and allow only the trace format or file of tcp packets
visible which gives information regarding no.of packets
sent,acknowledgement recieved and source and destination of the tcp
packet,mobile node
hi,
u can get the best from the tracefile is with the help of awk script.
On 3/9/07, Vijay Kumar c [EMAIL PROTECTED] wrote:
Hi nsusers ,
How to filter the traces or information of routing protocol and
acknowlegement and allow only the trace format or file of tcp packets
visible which
hi
i have some problem in euran programming. i tried the test script these run
fine. but i want to modify umts script. (in which current communication
between node1-rnc and acknowledgement send to bs which is at node1.) but there
is no communication to ue1 or ue2 which are connected by umts
hi
thanks for reply.
i use test_udp script and mannul to write program for umts euran. it runs fine.
but there is no communication between ue1 and base station. even i put the sink
at ue1. but the trace file show only communication between base-station, fixed
node and rnc. but no message
Hi all,
I have read articles speaking about the available bandwidth of link and about
delay of this link in the ad hoc networks (MANETs).
But I have not found any explanation on the way of calculating them under NS.
Please help me. How to calculate them under NS2?
waiting for
Datum: 27 Feb 2007 14:30:17 -
Von: harpreet [EMAIL PROTECTED]
An: ns_users ns-users@ISI.EDU
CC:
Betreff: [ns] urgent : problem in installing ns2
hi
i have older version of ns2 now i uninstall that and now when i try to
reload ns2.30 or and then other earlier version too i am getting
we r working on LEACH protocolcan anybody help how to proceed ..where can
we find the source code and how to simulate it...
-
Don't be flakey. Get Yahoo! Mail for Mobile and
always stay connected to friends.
we r working on LEACH protocolcan anybody help how to proceed ..where can
we find the source code and how to simulate it...
-
Bored stiff? Loosen up...
Download and play hundreds of games for free on Yahoo! Games.
hi
i am working on wireless network scenario in which one node retransmit the data
received to other node.
I am looking for these scenario urgently.
if anybody knows this please share related knowledge.
thanks in advance
harpreet singh
thanks guys.
is this possible to provide some fixed hopping node or routng path in mobile
network. and what happened if the node which is out of range want to send
packets through base station. let n3 out of range bs is base station and signal
reached to n3 from bs through n2. but if n2 want
Hi
I am a beginner in NS. I am trying to simulate multihopping in a
linear network on n nodes where the source is node1 and destination is
node-n.
I am using DSR as the routing protocol.But instead of multi hopping
node 1 is directly sending packets to node n.
How can I make node 1
:21:13 -0800 From: [EMAIL PROTECTED] To:
ns-users@ISI.EDU Subject: [ns] Urgent: bandwidth allocation in IEEE 802.11e
Hi I am working on wireless ad hoc networks. I have simple scenario in
which one node is sending packets to other. I set packet size 512 bytes and
interval between each
Hi all,
I have to copy xgraph's outputs to a format that will to not loss the colors.
Unfortunately, the saving to the postscript format, lose the curves's color
which will make the result not easy to understand. It will be also preferable
that this format allow my to import this curves
dear all;
In my simulations, i want to make some modifications in ns code (C++ or Tcl) in
order to add an other entry to my trace file. i explain more, i'm simulation an
Ad Hoc network (802.11) using ns. in order to study the contention window (CW_)
of backoff procedure i need to trace this
Hi
I am working on wireless ad hoc networks.
I have simple scenario in which one node is sending packets to other.
I set packet size 512 bytes and interval between each packet is 0.0025.
it means application layer (CBR) generate total 1/0.0025 = 400 packets in a
second. Each packet is 512x8 =
Hi
I am working on wireless ad hoc networks.
I have simple scenario in which one node is sending packets to other.
I set packet size 512 bytes and interval between each packet is 0.0025.
it means application layer (CBR) generate total 1/0.0025 = 400 packets in a
second. Each packet is 512x8 =
hello
i badly require the simulation of cgsr in ns2.
can anybody of u tell me whether cgsr is simulated in ns2 or not?
code for cbrp is available on net. please suggest me, if this code will be
useful for simulating cgsr. and how will it be helpful?
i shall be thankful for your help in
hello
i got one code on cbrp which was tested on ns-2.1b5. i made changes on my
previously installed ns-2.28 under fedora 4 using the changes and readme files
given in cbrp folder.
then again tried to install it.
but i couldn't install it as the following error has encountered ns make
Hi everybody!
I'm using a new MAC protocol for wireless nodes, in ns2.28 .
I need the transmission time information to decrease node's energy, at
wireless-phy.cc.
For this reason in MAC I set the txtime_ variable of the common header, before
sending down the MAC control packets to PHY.
Hi;
I have to implement a binary tree network (3 or 4 or 5 layer) and make some
udp and ping attacks on it. Have somebody ns-2 code for a binary tree
network which i can implement in ns 2.29 or ns 2.30?
Please answer me as soon as possible
1 - 100 of 145 matches
Mail list logo