Hi ,everyone
who can provide source code of IAMR for NS2,IAMR means Interference Aware
Multipath Routing Protocol for
Wireless Sensor Networks that can run in ns-2.34 or ns-2,35.
Thanks for your help!
Hi ,everyone
who can provide source code of IAMVD for NS2,IAMVD means
Interference-Aware Multipath routing for Video Delivery that can run in ns-2.34
or ns-2,35.
Thanks for your help!
Hi ,everyone
who can provide source code of IAMVD for NS2,IAMVD means
Interference-Aware Multipath routing for Video Delivery that can run in ns-2.34
or ns-2,35.
Thanks for your help!
Hi ,everyone
who can provide source code of IAMVD for NS2,IAMVD means
Interference-Aware Multipath routing for Video Delivery that can run in ns-2.34
or ns-2,35.
Thanks for your help!
Hi All,
How can i send user defined data payload between two nodes in NS2?
How can I display the contents at the receiver node?
Please reply to me as soon as possible.
Regards
manonmani
Hi all,
How can I integrate IEEE 802.11p in NS-2.35?
How can I set up VANET environment in NS-2.35?
How can I go about streaming in VANET?
Regards
Manonmani
Hi all,
Can anybody tell how to obtain the coordinates of the node movements from
nam.
On Sun, Jan 22, 2012 at 4:28 AM, shoaib saleem shoaib.sal...@it-sudparis.eu
wrote:
Hi again ,
ok what you can do is that the code which i wrote earlier , you can modify
it a bit as follow
*1. include
I have my goal to design a simple wimax scheduler in ns2. I have recently
installed ns2.31 and patched it with NIST wimax module.
Being a novice, i seek help on how to proceed for this.
-Regards.
Hi Friends,
I need help regarding MAODV protocol. I applied patch of MAODV and when I am
compinling ns2 through make command I am getting following errors.
mac/channel.cc: In member function 'void
WirelessChannel::calcHighestAntennaZ(Phy*)':
mac/channel.cc:625: error: 'class WirelessPhy'
Hi,
I am going to do Mobility management in WiFi, WiMax and UMTS. I am going
to use 802.21 for mobility management.
I want to know which version of NS2.XX is more suitable for 802.21 and which
also supports WiFi, WiMax and UMTS. I tried to find out comparisons but
could not find enough
Aqeel,
any version of NS you choose for your purposes, I suggest you to use It in
a Virtualbox with Ubuntu [8.04 - 9.04].
This is the most compatible NS-2 set you ever use in Windows.
Cygwin is an option, but:
- I can tell you that NS runs slower in Cygwin than in a
Virtualbox Linux VM. You
Hi,
The Greis ns2 tutorial and 'ns2 example' are very good introduction to
ns2 beginners. But for a quick reference for wireless scenarios, you
may first try the labs from UIUC:
http://www.crhc.uiuc.edu/wireless/assignments/simulations/lab109.html
But Greis' tutorial is worthwhile by all
dear all ,
i am new to ns2 and i want to run and compare aodv and dsr but i don't know
how to write and use scripts to generate scenario files and traffic files.
thanks
Hi Every Body
Is there any tutorial or powerpoint slides related to implementation of
the 802.1Q priority Tagging .
If any body know kindly send me the links or files.
Or
Guide me how to implement the priority tagging .
I will be grateful to you
I hope you will reply me soon
Engr.
Hi Every Body
Is there any tutorial or powerpoint slides related to implementation of
the 802.1Q priority Tagging .
If any body know kindly send me the links or files.
Or
Guide me how to implement the priority tagging .
I will be grateful to you
I hope you will reply me soon
Hello,
We are final year students of IIIT Bangalore,currently pursuing M.Tech in
Information Technology. We are doing research on Adaptive sleep mode for
wimax 802.16e under guidance of Prof. Debabrata Das(Ph.D, IIIT Kharaghpur).
We have started simulation on ns-2.29. We need help from you
Hi,
I think you're talking about the awk scripts to interpret the output
file given by the simulator, or not? Because that files look for the
d.
I was talking about the second method:
[Method 2---modify C++ code]
The basic idea is to insert two fields, sendtime_ and pkt_id_,
in the
hi
thanks for information. but i already tried these codes. if you check the codes
these depends upon the 'd' symbole in tracefile. but i got tracefile of eurane
which do not have 'd'-drop packet. but i am sure there are some resending of
packets. so these doesn't work out for me.
thanks
+ 1.84375 0 2 cbr 210 --- 0 0.0 3.1 225 610
- 1.84375 0 2 cbr 210 --- 0 0.0 3.1 225 610
r 1.84471 2 1 cbr 210 --- 1 3.0 1.0 195 600
r 1.84566 2 0 ack 40 --- 2 3.2 0.1 82 602
+ 1.84566 0 2 tcp 1000 --- 2 0.1 3.2 102 611
- 1.84566 0 2 tcp 1000 --- 2 0.1 3.2 102 611
r 1.84609
Hi,
harpreet schrieb:
Hi.
I want to analysis trace file which looks like (not exactly ) data given
below.
Here are NS Manual's example
+ 1.84375 0 2 cbr 210 --- 0 0.0 3.1 225 610
- 1.84375 0 2 cbr 210 --- 0 0.0 3.1 225 610
r 1.84471 2 1 cbr 210 --- 1 3.0 1.0 195 600
r
hi
thanks for reply. my problem is there is no inforamtion when data is send
from source node and there is no information when packet is dorpped (as there
is no s and d in first colum) and i go to analysis this file all analysis files
like throughput, jitter and all other work with s and r
hi
i am also looking for some help regarding my project. i am want to implement
ad-hoc networking like manet and relaying in umts or in gsm. i think this needs
joining manet + umts and then some modification in routing. please suggest me
how to implement all these together. what the option
Hi.
I want to analysis trace file which looks like (not exactly ) data given below.
Here are NS Manual's example
+ 1.84375 0 2 cbr 210 --- 0 0.0 3.1 225 610
- 1.84375 0 2 cbr 210 --- 0 0.0 3.1 225 610
r 1.84471 2 1 cbr 210 --- 1 3.0 1.0 195 600
r 1.84566 2 0 ack 40 --- 2 3.2
Hi all,
I am new to Ns-2. I am interested in implementing the simple power
control scheme. i.e. RTS/CTS are transmitted at highest power and the
Data/ Ack are transmitted at desired power calculated with the exchange
of RTS/CTS.
I have a feeling that it is not possible to do that using
Hi,
I am new to Ns. I want to simulate a case where nodes cooperate with
each other in 802.11.
What I need is to have nodes which can help others nodes to forward
their data. I am lost and don't know how to start.
A simple scenario can be that we have three nodes
Dear Users,
I need to simulate multi-interface based mobile network. The interfaces are of
different types, such as WiMAX, WiFi, WLAN, Bluetooth, UMTS etc.
Could anybody refer, if there any integrated NS module for the above scenario.
Looking forward for help in this regard.
Thank you.
Hi,
Festive greetings to you all!
I recently installed ns2 on Red Hat Linux 9. I am unable to build
xgraph although other components of ns2 are getting built correctly. When
I run ./configure followed by make in the xgraph directory, it tells:
Makefile:255: *** missing separator. Stop.
Mitra
Sent: Saturday, May 06, 2006 7:07 AM
To: ns-users@ISI.EDU
Subject: [ns] Help required for ns2HCCA patch - setting TXOP value
Hi!
I am using the ns2HCCA patch to simulate ARROW scheduler using NS-2.27.
One thing is not clear to me, when calculating the txop of a stream,
should i use
Hi Chanchal,
I am assuming you're working with Monarch extensions. Otherwise you'd
have to download the ODMPR patch from their website at
http://www.monarch.cs.cmu.edu/software.html
There's a Pearl script in SCRIPTS directory called mcast_totals... (or
something) similar. You can use it to get
Please take a look at last 30 lines of the output file. It contains
all summarised data, control pkt sent, received are in mrtr and
data pkt details are in cbr..
cbr_rx and cbr_srx list the received and expected number of pkts. Also
trace contains all pkts sent received by each node, so you
Hi There,
I am a student of Delhi University, currently working on a project based on
HCCA / EDCA (80211 E). I downloaded the latest NS snapshot ( 20050907-14.2).
However, I am not being able to figure out where to start from for building a
TCL script for simulating HCCA/EDCA mechanisms.
31 matches
Mail list logo
