Hi Hauke,
Sorry, I do not understand. Could you please clarify ?
Regards,
Tatha
On 23.03.2012 16:53, Hauke Mehrtens wrote:
On 03/23/2012 12:48 PM, Tathagata Das wrote:
Hi,
Attached file adds uClibc configuration specification for external
toolchain. Instead of having to configure specificat
On 2012-03-23 8:13 AM, Gregory Finch wrote:
> On 2012-03-22 8:14 PM, Hanno Schupp wrote:
>> My last good image is on the Mikrotik rb450g is 30857. 31037 no longer
>> works. I have not tested in between. I suspect this is a regression
>> from the changes introduced somewhere in 30994-31011, which ex
Hi,
On Fri, Mar 23, 2012 at 07:39:19PM +0100,
openwrt-devel-requ...@lists.openwrt.org wrote:
> Message: 2
> Date: Fri, 23 Mar 2012 18:00:18 +0100
> From: Spyridon Tompros
> To: openwrt-devel@lists.openwrt.org
> Subject: Re: [OpenWrt-Devel] LANTIQ- EASY5072- UART0 problem
> Message-ID: <4f6cac22.
Reduce code for MDIO access.
Signed-off-by: Nathan Hintz
--- /dev/null
+++ target/linux/brcm47xx/patches-3.2/236-bcma-reduce-mdio-ops.patch
@@ -0,0 +1,103 @@
+--- a/drivers/bcma/driver_pci.c
b/drivers/bcma/driver_pci.c
+@@ -57,10 +57,10 @@ static void bcma_pcie_mdio_set_phy(struc
+ }
Changes since v1: Patch file renamed (235-bcma-enable-irq6.patch).
Signed-off-by: Nathan Hintz
--- /dev/null
+++ target/linux/brcm47xx/patches-3.2/235-bcma-enable-irq6.patch
@@ -0,0 +1,29 @@
+--- a/drivers/bcma/driver_mips.c
b/drivers/bcma/driver_mips.c
+@@ -75,7 +75,7 @@
+ re
This probably doesn't matter, but reads/writes are always 4 bytes, so always
map 4 bytes.
Changes since v1: Moved changes to new patch file
(234-bcma-always-map-4-bytes.patch).
Signed-off-by: Nathan Hintz
--- /dev/null
+++ target/linux/brcm47xx/patches-3.2/234-bcma-always-map-4-bytes.patch
@@
Sometimes it's useful to compare the generated config file from UCI config with
a hand-edited dnsmasq config file, especially if you're migrating to an OpenWRT
router from something else (such as Astlinux).
Putting the generated config makes it easier to capture and diff, etc.
Signed-off-by: Ph
If the problem is HW it cannot become better anymore.
In case you plan to do a new board, find below some rules for your HW
design (not fully respected by us in our board). The evaluation board
respects them:
-Differential signals length less than 1inch
-Same trace length and width
-Grou
On Fri, 2012-03-23 at 17:24 +0100, Spyridon Tompros wrote:
> Some additional info:
> Do you have a proprietary board or an EASY50712 evaluation board?
> We have both and on the EASY board we do not see any errors any more. On
> the proprietary board we encounter some at high rates, that's why I
>
Some additional info:
Do you have a proprietary board or an EASY50712 evaluation board?
We have both and on the EASY board we do not see any errors any more. On
the proprietary board we encounter some at high rates, that's why I
believe it is a matter of traces routing.
Eventually the USB I/F i
Yes, I have the same impression about the errors. We need to test
again in detail all speed modes to get a better overview, but the system
works fine. If there is a higher layer protocol that supports flow
control then this bit error rate is practically nothing.
Spyros
On 23/3/2012 4:07 μμ,
On 2012-03-22 8:14 PM, Hanno Schupp wrote:
>
> My last good image is on the Mikrotik rb450g is 30857. 31037 no longer
> works. I have not tested in between. I suspect this is a regression
> from the changes introduced somewhere in 30994-31011, which extended
> the 8216 switch chip code (which also
On Fri, 2012-03-23 at 15:41 +0100, Spyridon Tompros wrote:
> Hi,
>
> We tested the code on our board. Now the USB host controller
> functionality works almost perfect, with some losses at very high rates
> (921600), while it does not crash any more nor with use-to-serial USB or
> other media de
On 23/03/12 15:50, Spyridon Tompros wrote:
> Thanks,
>
> we are also missing UART0, which does not work despite following the
> right programming sequense documented in the Users' Manual. We are still
> working on it. I do not know if there is any code available.
>
> Spyros
>
still looking int
Thanks,
we are also missing UART0, which does not work despite following the
right programming sequense documented in the Users' Manual. We are still
working on it. I do not know if there is any code available.
Spyros
On 23/3/2012 3:45 μμ, John Crispin wrote:
Hi,
Ok, i will add this patch
Hi,
Ok, i will add this patch to the upcoming kernel update
John
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
Hi,
We tested the code on our board. Now the USB host controller
functionality works almost perfect, with some losses at very high rates
(921600), while it does not crash any more nor with use-to-serial USB or
other media devices.
Thanks a lot,
Spyros
On 22/3/2012 9:12 μμ, Conor O'Gorman w
On 23/03/12 15:16, Conor O'Gorman wrote:
> On Fri, 2012-03-23 at 15:09 +0100, John Crispin wrote:
>> On 23/03/12 15:06, John Crispin wrote:
>>>
>>> found the bug
>>>
>>> http://dev.phrozen.org/gitweb/?p=openwrt.git;a=blob;f=target/linux/lantiq/patches-3.2/0068-MIPS-lantiq-adds-USB_ARCH_HAS_HCD-to-C
On Fri, 2012-03-23 at 15:09 +0100, John Crispin wrote:
> On 23/03/12 15:06, John Crispin wrote:
> >
> > found the bug
> >
> > http://dev.phrozen.org/gitweb/?p=openwrt.git;a=blob;f=target/linux/lantiq/patches-3.2/0068-MIPS-lantiq-adds-USB_ARCH_HAS_HCD-to-CONFIG_LANTIQ.patch;h=b9d3caee16e5b362a27ce
On Fri, 2012-03-23 at 11:29 +0100, John Crispin wrote:
> Do you want to get HOST or DEVICE working ?
>
Host.
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
Weedy -
Yeah, the trick to getting it to load is using the "-initramdisk" image. I
wasted hours with errors about flash block sizes or something like that and
it booted first time when I used the ramdisk image. After you get it
booted with that ramdisk image you can copy a real image over to the
On 03/23/2012 12:48 PM, Tathagata Das wrote:
> Hi,
> Attached file adds uClibc configuration specification for external
> toolchain. Instead of having to configure specifications via make menuconfig
> for external toolchain, one may select the package libuClibc, which
> additionally will copy .
Hi,
Attach patch unsets LPATH flag (found configured in some custom host
distributions) to make OpenWRT compile its toolchain without any issues. I have
used latest trunk source code (revision number 31050) to create this patch.
Regards,
Tathagata
env-fix-unset-lpath
Description: Binary data
Hi,
Attached file adds uClibc configuration specification for external toolchain.
Instead of having to configure specifications via make menuconfig for external
toolchain, one may select the package libuClibc, which additionally will copy
./lib/ld-uClibc* and ./lib/libuClibc*. I have used lates
Do you want to get HOST or DEVICE working ?
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
On 23/03/12 03:06 AM, Hanno Schupp wrote:
> Sure, 450G is supported for a long time. No idea about the 435g, give if a
> try and let us know...
I failed horribly to get a image to boot. I spent a week going over the
twenty-seven thousand line kernel patch microtik sent me and had no luck.
___
Sure, 450G is supported for a long time. No idea about the 435g, give if a try
and let us know...
On 23/03/2012, at 7:38 PM, Weedy wrote:
> On 22/03/12 11:14 PM, Hanno Schupp wrote:
>> My last good image is on the Mikrotik rb450g is 30857. 31037 no longer
>> works. I have not tested in between
27 matches
Mail list logo
