Snowcrash wrote:
I'm running Qmail with Vpopmail from inter7.com and I'd like to know
how I would forward one e-mail address to mutiple people. For example
messgaes sent to [EMAIL PROTECTED] are sent to [EMAIL PROTECTED], [EMAIL PROTECTED] and
[EMAIL PROTECTED] Probably an easy
One thing that could be convenient to is make a hostname that map's to multiple
IP's, if you have for instance smtp.mydomain.com which has IP 192.168.1.1 and IP
192.168.1.2 in DNS, the machine that send's to smtp.mydomain.com would send it
to the first given IP unless it's not availlable end
Bob Rogers wrote:
From: "Snowcrash" [EMAIL PROTECTED]
Date: Sat, 20 May 2000 19:23:01 -0500
I'm running Qmail with Vpopmail from inter7.com and I'd like to know
how I would forward one e-mail address to mutiple people. For example
messgaes sent to [EMAIL PROTECTED]
hello all,
i have an lan with internet connection through a firewall. all the users
are inside the lan and the internal mail is hosted by sendmail which
delivers all the internal mails localy and forwads all the external mail
to the mailserver at the firewall from where it goes to the
I am re-installing qmail to see if I can figure out the problems I am
having at getting this thing running. Going through the steps on "Life
with qmail" I get to 2.8.5 which states this:
2.8.5. Start qmail
Finally, you can start qmail:
/usr/local/sbin/qmail start
When I enter
I still get the error, but I've noticed that when I open another terminal,
qmail seems to be running, but twice. When I do ps -aux I can see these
running:
__
rootsvscan
rootsupervise qmail-s
rootsupervise log
root
qmail Digest 22 May 2000 10:00:01 - Issue 1009
Topics (messages 42131 through 42155):
Re: I want to leave this list
42131 by: Karsten Kaus
42133 by: Pavel Kankovsky
Re: The current status of IETF drafts concerning bare linefeeds
42132 by: Pavel Kankovsky
The domain in question is yourprospects.com and test.yourprospects.com
I did state that before my log file in my original post.
mail is going to [EMAIL PROTECTED] when it was sent to
[EMAIL PROTECTED]
I appreciate any suggestions.
Barry Smoke
##virtualdomains##
I am getting the following error in my mail log file:
May 22 18:33:52 localhost qmail: 959000632.425508 alert: unable to append to
bounce message; HELP! sleeping...
What could be the reason?
My server "qmail-queue" process has become zombie. Following is the output of
"ps":
qmailq 11687 0.0
Pavel Kankovsky writes:
On 19 May 2000, D. J. Bernstein wrote:
allow non-MIME 8-bit mail, for example, even though the relevant RFCs
(*) If yes, what extra functionality was provided? (Apparently, it was not
an ability to transfer non-English plaintexts because you do not know how
to
Pavel Kankovsky writes:
Do you know how many people read the footer and left without asking?
Do you know how many people would ask if the footer was not there?
No one cares about that list. We care about this list. Inappropriate
unsuscribe requests are usually only one line long, and they
Hi,
I am trying to limit the size of inbound/outbound mails
on my mailserver.
Will an entry in databytes under /var/qmail/control
do this ?
Running qmail 1.03+vpopmail+sqwebmail here
Thanks
Dewald
On Mon, 22 May 2000, Russell Nelson wrote:
Interpreting, and encoding are two different things. You're talking
about interpretation of a bytestream, and Dan is talking about the
encoding. In particular, he's dissing Content-Transfer-Encoding:
quoted-unreadable.
Sure. But he said
Hi Dewald,
that's correct. The databytes file under /var/qmail/control is
responsible for size limits for inbound/outbound mails.
Just insert e.g. 400 and you've limited the size to 4MB.
But I'm still looking for a solution to seperate inbound and outbound
mal size, but I haven't found any
On Mon, May 22, 2000 at 08:05:04AM -0500, Barry Smoke wrote:
The domain in question is yourprospects.com and test.yourprospects.com
I did state that before my log file in my original post.
mail is going to [EMAIL PROTECTED] when it was sent to
[EMAIL PROTECTED]
That's because
James:
When I enter "/usr/local/sbin/qmail start" I get this error:
multilog: fatal: unable to lock directory /var/log/qmail%smtp: access
denied
qmail uses unix security features like out of the book. qmails permission
setup is fine-grained. if you follow the setup proposed concerning
Hi,
In response to my first post, I did the following:
I added 100 to the databytes file under /var/qmail/control,
but see that qmail just drops the connection when it reaches
100 bytes.
How do I tell qmail to send a bounce messages to the originating
host ?
(Or even better, where
Snowcrash wrote:
I'm running Qmail with Vpopmail from inter7.com and I'd like to know
how I would forward one e-mail address to mutiple people. For example
messgaes sent to [EMAIL PROTECTED] are sent to [EMAIL PROTECTED], [EMAIL PROTECTED] and
[EMAIL PROTECTED] Probably an easy
i know this is not the correct list but maybe i can get help here. i have a lyris
lisetserv on a NT server and need to get all e-mail accounts off the server and into
the NEW and IMPROVED ezmlm-idx server. has anyone done or attempted this?
thanks chris
-
I search a good documentation on vpopmail, qmailadmin and
sqwebmail.
I'm currently creating a mail server for an hospital in
France.
Qmail, Maildir and IMAP = are operating.
I would like to manage the server and I'd like to make an
interface for the client -- that's why I'd use theise
tools.
On Mon, May 22, 2000 at 01:13:50PM +0530, Rajkumar S. wrote:
hello all,
i have an lan with internet connection through a firewall. all the users are
inside the lan and the internal mail is hosted by sendmail which delivers all
the internal mails localy and forwads all the external mail to
Hi folks!
I am a qmail beginner i would like to share a small program i wrote to
aid postmaster dealing with qmail, specially if you are using qmail
accounts (not system ones). I hope you will enjoy such a small program i
wrote.
If some one here would like give it a try, send me a mail
I have been scanning the list archives for hours, trying to figure out how I
can accomplish this:
I have a qmail server up and running perfectly, doing selective relaying for
our internal network only. I would like to further limit this for selected
users, if possible. My ultimate goal is to
On Mon, May 22, 2000 at 10:21:23AM -0500, Ed Woodson wrote:
I have been scanning the list archives for hours, trying to figure out how I
can accomplish this:
I have a qmail server up and running perfectly, doing selective relaying for
our internal network only. I would like to further
Rajkumar S.:
but how can i tell Qmail to send all the mails to indsoft.co.in to
192.168.1.1
what does your mx record say?
also how about the error processing, ie no such user etc...
will go to the postmaster, setup in ~aliases. consult tfm.
or bounces.
--
clemens
Rajkumar S.:
but how can i tell Qmail to send all the mails to indsoft.co.in to
192.168.1.1
dnsmx indsoft.co.in answers:
10 beta.indsoft.co.in
dnsip beta.indsoft.co.in answers:
203.129.250.50
so your problem might ly in the dns area.
--
clemens
On Mon, 22 May 2000, Ed Woodson wrote:
I have been scanning the list archives for hours, trying to figure out how I
can accomplish this:
I have a qmail server up and running perfectly, doing selective relaying for
our internal network only. I would like to further limit this for
I just share one experience that happened in our department:
The mail server was on one box, and users home directories on
another, and /home was nfs mounted on the mail server. qmail-users
was not set up, and one day, while our sysadm was on vacation, the nfs
server failed---and it was down
Hi All,
After searching the qmail list archives for DSN, I realize this topic has
been beaten around quite a bit. I still need to ask though. I have a
client using Netscape's DSN delivery receipt, who's been hounding me about
qmail not supporting this rfc.
I'm wondering what my options
At 5/20/2000 10:39 AM +0200, clemensF wrote or quoted:
Kai MacTane:
People who are determined to be stupid seem to be:
a) 100% capable of being stupid, no matter how easy you try to make it
for them to be smart (or at least average); and
b) 100% incapable of being convinced that
kapil sharma:
May 22 18:33:52 localhost qmail: 959000632.425508 alert: unable to append to
bounce message; HELP! sleeping...
permissions/ownership?
--
clemens [EMAIL PROTECTED]
Christian Wiese:
But I'm still looking for a solution to seperate inbound and outbound
mal size, but I haven't found any solution yet.
As fa as I know it's also possible to limit the size of the mails via
maildir, but I haven't tried this solution.
are you referring to the disk-quota?
--
hello,
pop3 isn't working for me!
- i installed "ucspi-tcp" and "checkpassword"
- then i linked /var/spool/mail/usr to $HOME/Maildir
- in /var/qmail/rc i changed Mailbox to Maildir
qmail-start ./Maildir splogger qmail
- in the startup script i added
tcpserver 0 110
On Mon, May 22, 2000 at 02:42:49PM -0400, Michael Mannsberger wrote:
pop3 isn't working for me!
- i installed "ucspi-tcp" and "checkpassword"
- then i linked /var/spool/mail/usr to $HOME/Maildir
There's no need to do this if you're delivering directly to $HOME/Maildir/.
- in
That isn't what you wanted to do
You have to use Maildir format files (not a softlink to the Mailbox).
Maildir format uses separate files for each mail message, mailbox uses one
file.
qmail's Pop server doesn't handle mbox format.
You need to use something like /var/qmail/bin/maildirmake in
On Mon, 22 May 2000, Michael Mannsberger wrote:
hello,
pop3 isn't working for me!
- i installed "ucspi-tcp" and "checkpassword"
- then i linked /var/spool/mail/usr to $HOME/Maildir
- in /var/qmail/rc i changed Mailbox to Maildir
qmail-start ./Maildir splogger qmail
- in
Matthew Soffen wrote:
:then you should be a bit farther..
Or a bit *farter*.. depending on how you digest the instructions.
James
Bit Farter
Hi,
I checked the web page on www.inter7.com regarding vpopmail. They don't
really explicitly say whether vpopmail works only with Maildir mailbox format or
not. Can anyone please enlighten me on this? Thanks in advance.
I just uploaded the dt-run package to
ftp://moni.msci.memphis.edu/pub/run/
rsyncers can acces with
rsync -vr moni.msci.memphis.edu::run
There are also rpms in the directory.
The dt-run package replaces my qmail-run and tcpserver-initscripts
packages, and it is completely incompatible with
On Thu, 18 May 2000, Peter Schuller wrote:
(ezmlm ML archive is down, and I find no mention of where the list is
located so I cannot subscribe to it or send to it; hence I am asking here)
Hello,
I want to make an ezmlm managed mailinglist moderated (it's an announce
list). It is stated
Hi,
I am setting up virtual domains to handle mail for
[EMAIL PROTECTED] to be delivered to [EMAIL PROTECTED]
[EMAIL PROTECTED] to be delivered to [EMAIL PROTECTED]
[EMAIL PROTECTED] to be delivered to [EMAIL PROTECTED]
and so on.
how can i set this up? i have read the documentation but must
Hello,
I'm trying to do just what the subject says. What I'd like to do is
download the mail from the old mail server into the new one, and I'm
wondering if there's a tool to do it. I looked at fetchmail, but it's mbox
delivery only, so if anyone on this list knows of a quick easy way to do
everybody will still recall the nuisance with a certain party named:
[EMAIL PROTECTED] . to dump these nessages
automatically, i put this host into control/badmailfrom. here's what
happens when fetchmail meets qmail on this topic. it renders the
mechanisms badmailfrom, databytes and the likes
mbox is just qmail's name for Mailbox. Really they are both the same
thing, one large text file. You should be able to plug it into your new
user directory, make a symbolic link to the file in /var/spool/mail and
you should be really to accept mail again.
Brent
Aaron Seelye wrote:
Hello,
On Mon, May 22, 2000 at 07:01:41PM -0400, [EMAIL PROTECTED] wrote:
I am setting up virtual domains to handle mail for
[EMAIL PROTECTED] to be delivered to [EMAIL PROTECTED]
[EMAIL PROTECTED] to be delivered to [EMAIL PROTECTED]
[EMAIL PROTECTED] to be delivered to [EMAIL PROTECTED]
and so
45 matches
Mail list logo