Re: [RE-wrenches] mate 3s locking

Hi william Very tech fix with the relay! Fortunately or unfortunately there is no reliable web at the location but someone who manually checks things. Yes the 3s still has some of the same problems Thx Jay Peltz power. > On Nov 16, 2018, at 2:14 PM, William Miller wrote: > > Jay: >

Re: [RE-wrenches] mate 3s locking

Jay: I have problems with all of my Mate3 and 3s controllers locking up. So much so that I have implemented the following steps: 1. For most installations I leave the hub wire cover off and label the Mate lead. Clients are instructed to unplug and re-plug the Cat5 lead whenever the

Re: [RE-wrenches] Microfractures

Andrew, Wrenches While in Hawaii, l had modules that had fractures, some showed up in low performance, some did not and l don't recall there being a wobble on the high side. I would suggest inspecting what the modules look in question. Most of the time the cracks are visable and may look like worm

Re: [RE-wrenches] mate 3s locking

Hello All And Hello Jay I just asked the tech support boss on this as I had no idea. He has a test setup that allows him to switch individuals lines on the cat5 cables. We can duplicate Jay's screen shot below by opening the some of the lines to the cat 5 cable.

[RE-wrenches] Microfractures

Wrenches - Does anyone have experience getting electroluminescence (EL) test results from module manufacturers? I just shot some module IV curves as part of an acceptance test and they all show some irregularities on the vertical slope that Solmetric says are indicative of microfractures:

[RE-wrenches] mate 3s locking

HI All, I’m wondering if anyone else is having mate 3s locking up problems? I’ve got 2 systems that have had this happen. One is a big system ( 2 radians and 5 CC). Of course its a long ways away and no there isn’t internet so no OpticsRE. Its been reprogramed with latest REV firmware. No

[RE-wrenches] NEED Sharp NU-Q235 F2 module

Wrenches I am in need of at least 1 Sharp NU-Q235 F2 module, If there are 2 available I would be happy to get them both. Please contact me off list. THANKS in advance TUMP > t...@swnl.net > mailto:t...@swnl.net%22%20%5Co%20%22blocked::mailto:t...@swnl.net> > www.SWNL.net >

Re: [RE-wrenches] 2 wire to 3 wire start on Older ONAN 12.5JC

ATKINSON ELECTRONICS, INC. Web Site: www.atkinsonelectronics.com While these might seem complicated they are well thought out and easy to program despite the many pages of instructions. A simple jumper wire and then pressing the select button will scroll