-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-w
gt; Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searchi
d Alliance
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.htm
maillist.html
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> www.members.re-wrenches.org
>>
>> ___
> List sponsored by Redwood All
to allow for.
Jeff Irish
Hudson Solar
From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf
Of Garrison Riegel
Sent: Thursday, October 15, 2015 3:50 PM
To: 'RE-wrenches'
Subject: Re: [RE-wrenches] Racking for Steep Roofs
Thanks for the responses.
I called UniRac and IronRidge
I’ve seen similar damage from a nearby lightning strike, on two rural ground
mounts, although the damage looks a little more severe in your photo.
Jeff Irish
Hudson Solar
From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf
Of Corey Shalanski
Sent: Tuesday, November
them and multiple ground rods.
Jeff Irish
Hudson Solar
Rhinebeck, NY
From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf
Of Corey Shalanski
Sent: Tuesday, August 05, 2014 10:03 AM
To: RE-wrenches@lists.re-wrenches.org
Subject: [BULK] [RE-wrenches] Diode Failure
Wrenches
installation would not be
NEC compliant.
Jeff Irish
Hudson Solar
-Original Message-
From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf
Of Richard L Ratico
Sent: Friday, June 27, 2014 6:53 AM
To: re-wrenches@lists.re-wrenches.org
Subject: Re: [RE-wrenches] Combining
August,
We're seeing multiple inverters with the same error, and not getting the best
of answers or support from SMA on fixing the problem so far. And this is not a
metal roof; it's PanelClaw on EPDM.
Jeff Irish
Hudson Solar
From: re-wrenches-boun...@lists.re
instances. Our state is not
requiring AFCI yet so we are requesting non-AFCI units from Power-One for the
time being.
Jeff Irish
Hudson Solar
-Original Message-
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of August Goers
Sent
Andrew,
Have a look at the Fluke VT02. The screen is small, but it is designed for
electrical troubleshooting, has a nice IR/visual mix feature, image capture,
and is less than $1,000.
Jeff Irish
Hudson Solar
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun
it, and are taking a long term brand
building view in my experience / opinion.
Jeff Irish
Hudson Solar
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Ray Walters
Sent: Friday, May 31, 2013 12:56 PM
To: RE-wrenches
Subject: Re: [RE
different diodes you could build
something to go into reverse at 600 VDC, 590, 580, whatever you want. I’ve
never tried it and might be missing something but for $10 it’s something to
consider. Just an idea!
Jeff Irish, PE
Hudson Solar
Rhinebeck, NY 12572
T.845.876.3767x110
F.845.876.3912
j
Blue Sky has 15 and 30 amp, 12 and 24 volt charge controllers that are each
independently MPPT that can be networked to their controller to communicate and
charge a single large battery bank.
Jeff Irish
Hudson Solar
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun
Code issues aside, even two seemingly identical runs each with breakers would
have at least slightly different resistances, causing the lower resistance run
to take more than half the total current, tripping the breaker in that run,
then causing a tripping of the breaker in the other run.
Jeff
the other rows from most of the flash? Anyone have experience with this?
Jeff Irish, PE
President
Hudson Solar
13 Hook Road
Rhinebeck, NY 12572
T.845.876.3767x110
F.845.876.3912
j...@hudsonsolar.commailto:j...@hudsonsolar.com
Solar Electric Systems
NYSERDA Eligible PV Installer
NABCEP Certified
No burn marks on the frames, modules or poles.
Jeff
Hudson Solar
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of jay peltz
Sent: Friday, September 07, 2012 12:59 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] Extensive Lightning
Starlight Solar Power Systems
On Sep 7, 2012, at 8:40 AM, Jeff Irish wrote:
A customer of ours has recently suffered lightning damage to 31 out of 160 top
of pole mounted modules. This is the first time in 10 years that I've seen
modules damaged by lightning. Lots of inverter GF fuses
EJOTs are a German product designed for this kind of application. They have an
application note that discusses purlin thickness, thread size, and pull out
strength. Mudge Fasteners carries them in the US.
Jeff Irish, PE
President
Hudson Valley Clean Energy, Inc.
and Adirondack Solar
13 Hook
the subject is
so new and specialized.
Jeff Irish, PE
President
Hudson Valley Clean Energy, Inc.
and Adirondack Solar
13 Hook Road
Rhinebeck, NY 12572
T.845.876.3767x110
F.845.876.3912
j...@hvce.commailto:j...@hvce.com
Renewable Energy Systems
Solar, Wind, Geothermal
NYSERDA Eligible PV Installer
NABCEP
Any recommendations from those of you with extensive off grid experience for a
small inverter, sine wave, 500-1000 watt range 120 vac output, 12 or 24 VDC
nominal input? I'm looking for something with low standby losses when there
are no loads, and high reliability. Thanks!
Jeff Irish, PE
William,
I did a 2 year long study on a Sunny Island 5048 grid-intertie battery back-up
system and found the SI and batteries used about 1.5kWh per day in overhead.
The batteries were 8 Concorde AGMs 212Ah C20. Hope that helps.
Jeff Irish, PE
President
Hudson Valley Clean Energy, Inc
. Hope this helps some.
Jeff Irish, PE
Hudson Valley Clean Energy
and Adirondack Solar
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Dana
Sent: Thursday, April 14, 2011 3:06 PM
To: 'RE-wrenches'
Subject
credits to the
others. The target market is counties, towns, cities, large companies. Not
quite what you have in mind, Larry, but a step in the right direction.
Jeff Irish, PE
President
Hudson Valley Clean Energy, Inc.
and Adirondack Solar
13 Hook Road
Rhinebeck, NY 12572
T.845.876.3767x110
F
is present.
Jeff Irish
-Original Message-
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Peter Parrish
Sent: Friday, December 10, 2010 12:07 PM
To: 'RE-wrenches'
Subject: [RE-wrenches] Driving Point Impedance of the Point
www.locusenergy.com http://www.locusenergy.com/
Locus energy has a product that can do this.
Say hi to Noel for me.
Jeff Irish
Hudson Valley Clean Energy
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re
If possible, install a j-box between the meter and MSP, run the service
entrance conductors through it unbroken and through Polaris type
connectors for the tap.
Jeff Irish
Hudson Valley Clean Energy
From: re-wrenches-boun...@lists.re-wrenches.org
it to be more of a toy than a serious
contractor product, although it may meet some user's needs. The Locus
system is more accurate and robust, with much greater data storage.
Jeff Irish
Hudson Valley Clean Energy
From: re-wrenches-boun...@lists.re
accurate and robust, with much greater data storage.
Jeff Irish
Hudson Valley Clean Energy
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Marco
Mangelsdorf
Sent: Monday, April 12, 2010 1
if they just
unpack modules.
Jeff Irish
Hudson Valley Clean Energy
-Original Message-
From: re-wrenches-boun...@lists.re-wrenches.org on behalf of Marco
Sent: Mon 10/12/2009 9:29 PM
To: 'RE-wrenches'
Subject: [RE-wrenches] prevailing wages for PV work
Does anyone know whether any state
Did you try SunWize?
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Drake
Chamberlin
Sent: Tuesday, September 08, 2009 3:38 PM
To: RE-wrenches
Subject: [RE-wrenches] Sanyo HIP 200 BA19
Hello
Hans,
The 2002 NEC 352.12D states that RNMC can't be used where ambient temps
exceed 50C unless listed otherwise. Most of the PVC we see is listed
otherwise, max 90C right on the conduit.
Jeff
-Original Message-
From: re-wrenches-boun...@lists.re-wrenches.org
on a mixed overhead and buried service.
Jeff Irish
Hudson Valley Clean Energy
-Original Message-
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Peter
Parrish
Sent: Monday, August 17, 2009 2:00 PM
To: 'RE-wrenches'
Subject: Re
it is usually sitting in storage in the shop.
Jeff Irish, PE
President
Hudson Valley Clean Energy, Inc.
Rhinebeck, NY 12572
T.845.876.3767
F.845.876.3912
j...@hvce.com
Renewable Energy Systems
Solar, Wind, Geothermal
NYSERDA Eligible PV Installer
NABCEP Certified PV Installer
IGSHPA Certified Geothermal
jobs but could be a back saver on the big ones.
Bob
On Wed, Aug 12, 2009 at 8:06 AM, Jeff Irish j...@hvce.com wrote:
Hi Geoff,
We picked up one of them last fall. Kind of bulky, takes up a lot of
truck space, and takes a full hour to set up. The angle of tilt for the
top leg is limited
to freeze/thaw climates. Would love to see a reasonably
priced product in a normal form factor for the north though, as I'm sure
there's a market.
Jeff Irish
Hudson Valley Clean Energy
-Original Message-
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re
.
Jeff Irish
Hudson Valley Clean Energy
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of jay
peltz
Sent: Friday, March 20, 2009 9:39 AM
To: RE-wrenches
Subject: Re: [RE-wrenches] Sunpower modules
37 matches
Mail list logo
