Re: loading modules during installation

Hi guys I am trying to install RedHat 6.2 on a sytem which has Symbios 53c810 embedded on Tyan S2510 motherboard. RedHat 6.2 doesn't recognize the onboard chipset, and the drivers are not available as module, I could only find the source codes for this. ( If anyone of you know from where I

Re: DHCP configuration question

On Wed, 30 Jan 2002, Brian Ashe wrote: Hi Bryan, thanks for the response, however I have read the man pages (Man is your friend and all that stuff), but it does not tell me how to assign 2 domains in a search list... Regards Enrico Enrico Payne, On Wednesday 30 January 2002 08:59, you said

Re: DHCP configuration question

I believe you just simply list the other search domains and seperate each entry with a white space. However you may have make multiple line entries, while changing the search domain name on each line. Try it both ways ands see what happens [EMAIL PROTECTED] wrote: On Wed, 30 Jan 2002,

Re: cannot make boot floppy

Gregory, I found this in the errata of Mandrake 8.1: Error scenario: The floppy drive is not accessible for use. Why: The PNP_BIOS does not initalize the floppy controller like the BIOS. Because of this, you may have difficulty access the drive with applications like mount or dd, and will

uname -p - unknown

Hi, what's the matter if the result of command line above is unknown ? Is it indicating an insatllation problem or other (configuration)? Thanks to all. ismes [RedHat 7.2 on PowerEdge 2500 RAID1] ___ Redhat-list mailing list [EMAIL PROTECTED]

Re: uname -p - unknown

No, it just means your system bios was not able to recognize the processor type. I have a machine like that. It was a 486/66 and I upgraded it to a 586/133. Although I used a very common chip (Evergreen), the bios always shows ??? for the processor during boot up. This results in unknown as

RE: uname -p - unknown

OK thanks... I'll be back for other questions..ahahaha [Concerning RAID and SCSI device] -Message d'origine- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]De la part de System Services Envoye : jeudi 31 janvier 2002 11:23 A : [EMAIL PROTECTED] Objet : Re: uname -p - unknown No, it

Re: Modem recommendations

I've had good luck with my AOpen FM56-ITU/2 Fax/Modem/Voice. I've even used the voice and fax features without any problems. It was about $60 US when I bought it. Regards, Ben On Wed, Jan 30, 2002 at 04:26:19PM -0500, Jonathan M. Slivko wrote: Hello, I want to set up a Linux workstation

Re: How to find CPU consumption?

On Thu, Jan 31, 2002 at 07:49:02AM -, Peter Kiem wrote: Hi Ashwin, I have a php based webmail program installed on Intranet and also planning to install on Cobalt servers.Can anyone tell me how do I find out the CPU consumption for this app on Internet as well as on Intranet Run

Re: cannot make boot floppy

I don't know if this applies to RH at all, but as I tried many other Linux distributions too I cam across this problem in Mandrake 8.1 as well. They offer a solution in their errata page : http://www.linux-mandrake.com/en/errata.php3#floppy Error scenario: The floppy drive is not accessible for

locale problem (i think?)

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi all Here's the score. I changed my locale to en_DK using the KDE locale mgr. Then I changed it back when I started seeing some weirdness. Now upon startup I'm seeing lots of lines like these: Jan 31 13:14:24 localhost ifup:

Re: DHCP configuration question

Hi, this has been resolved. The short answer is that dhcpd does not have and option for supplying and domain suffix search list. Through my travels on the internet, there seems to be a proposal out for the next generation of dhcp to allow for this... Thanks to all those who responded Regards

Changing boot.img

Hi, This may sound stupid but is their an easy way for boot.img to have say a png or some kind of graphic file. So when you install from boot floppy or cdrom you get a nice graphic? -matt ___ Redhat-list mailing list [EMAIL PROTECTED]

Re: Finding files less then 31 days old?

From: JW [EMAIL PROTECTED] At 08:31 PM 1/30/2002 -0600, you wrote: I'm trying to get a list of files 30 day sold or younger. I thought the following would to the trick: find . -type f -mtime 30 -ls But that only prints files that are exactly 30 days old. How do I do that and

ppp establishment problem to Cisco terminal server

Hello, I am trying to connect a rh box using wvdial. The ISP's technical support only knows windows. Using minicom, I found out that the terminal server on their end is some Cisco router/terminal server. It accepts the username and the password. To get it to start ppp negotiation, i found out

duplicate kernel package problem.

For some reason up2date kept saying that kernel-2.4.9-13 was available for update, and before I knew it I had kernel-2.4.9-13 installed 3 times. Each time I thought 13 was a new release, after I realized what was going on I started ignoring it. I didn't want to mess anything up so I just let

Re: duplicate kernel package problem.

Jeff Bearer [EMAIL PROTECTED] writes: For some reason up2date kept saying that kernel-2.4.9-13 was available for update, and before I knew it I had kernel-2.4.9-13 installed 3 times. Each time I thought 13 was a new release, after I realized what was going on I started ignoring it. I

Re: 'pushing' an application installation

On Wed, 2002-01-30 at 13:59, Anthony E. Greene wrote: You'll have to write a script to either mount the share (NFS, Samba) or download the files (FTP). An FTP script is simply a file containing all the commands that you'd use with the commandline FTP client, ie; open myserver.mydomain

Re: Linking against glibc2

On Tue, 29 Jan 2002, Daniel BI wrote: Helo, could anyone tell me how to link against glibc2? I tried to compile MySQL under RH7.2 and I had some errors, not present under 7.1 with the same source code. There are also sources, it says, for 'glibc2'. On a normal instalation of RH 7.2 I

Re: Upgrade GCC

On Wed, 30 Jan 2002, Fernando Lozano wrote: I did not meant production level. But as I need gcj 3.x features for Java I want to install it without disturbing the gcc suplied with Red Hat. Is this possible using Raw Hide packages, or should I compile from sources? []s, Fernando Lozano

Re: rawhide questions

On Wed, 2002-01-30 at 20:46, Jesus Ortega (a.k.a. Nitebirdz) wrote: On Wed, 30 Jan 2002, Steve Lee wrote: what is the linux rawhide. i see it on rpmfind.net is is able to install on redhat linux too if i download this. ? IIRC rawhide is used for testing and any packages there may be

Re: How to Change Hostname?

On Wed, Jan 30, 2002 at 05:02:20PM -0600, Saul Arias wrote: : Don't reboot. Reboot is for Windoze and kernel upgrades. I *did* say easiest. : service network restart That's not it. See Rodolfo's posting. -- Jason Costomiris| Technologist, geek, human. jcostom {at} jasons {dot}

Re: readme

On Wed, Jan 30, 2002 at 02:43:56AM -0800, Harry Putnam wrote: : Ani_Adarsh [EMAIL PROTECTED] writes: : : cat ./README |less : : I smell a UUoC award He gets bonus points for the spurious use of ./.. -- Jason Costomiris| Technologist, geek, human. jcostom {at} jasons {dot}

Re: Upgrade GCC

Out of curiosity, what version of gcc-2.96 are/were you using? I have 2.96-98 here. I've built mplayer with gcc-2.96 on several different machines without difficulty. (i586, i686, and athalon) I put together a spec file and a patch for their configure script to build my own rpms for

chpasswd problems...

Im trying to add many users to a system post kickstart for a disaster recovery plan. I wrote the following script, but for some reason some of the users passwords come out incorrect. I think this is due to weird chars in their password such as or ! etc. Most come out just fine i would say 90%

Re: readme

At 1/31/2002 09:39 AM -0500, you wrote: : cat ./README |less : : I smell a UUoC award Um... what's UUoC? -- Rodolfo J. Paiz [EMAIL PROTECTED] ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list

hp 1000

Hi, I have an HP 1000 laser jet, but I am not having much luck getting it to work with redhat 7.1. Any suggestions? Thanks, Samer _ Send and receive Hotmail on your mobile device: http://mobile.msn.com

Re: Upgrade GCC

Robert Dege [EMAIL PROTECTED] writes: Out of curiosity, what version of gcc-2.96 are/were you using? I have 2.96-98 here. I've built mplayer with gcc-2.96 on several different machines without difficulty. (i586, i686, and athalon) I put together a spec file and a patch for their

Re: Changing boot.img

On Thu, 31 Jan 2002, Chapman, Matt wrote: Hi, This may sound stupid but is their an easy way for boot.img to have say a png or some kind of graphic file. So when you install from boot floppy or cdrom you get a nice graphic? -matt Matt, You can make those changes yourself, if

sysreport

Hi, i'm on 7.2, Don't find 'sysreport' command anywhere, Did find / -name sysreport and whereis sysreport... I wanted to look at my installation and configuration, cause I guess I don't have correctly install my rh7.2. Is sysreport still current to the 7.2 (knew it from 7.1 on-line

bash: : command not found

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi all, That's the message that greets me each time I enter a shell. Worse, my screen is litterd with ': command not found' after each line that has anything to do with the boot and shutdown operations. Basically anything during startup/shutdown

sugestion for install program

Hi Here is a simple suggestion for the installation program. When it gives the bad or dirty media message it would be nice if it unmouned the cd so you could eject it and replace it with a different copy or try to clean it. Just a thought Linda

Re: readme

On Thu, Jan 31, 2002 at 02:53:52PM +, Rodolfo J. Paiz wrote: Um... what's UUoC? Useless Use of Cat, if I'm not mistaken. Emmanuel ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list

Re: sysreport

On Thu, Jan 31, 2002 at 04:57:52PM +0100, Ismael Touama wrote: i'm on 7.2, Don't find 'sysreport' command anywhere, You need to install the package. Get it from here: ftp://ftp.redhat.com/pub/redhat/linux/7.2/en/os/i386/RedHat/RPMS/ -- Ed Wilts, Mounds View, MN, USA mailto:[EMAIL PROTECTED]

Re: rawhide questions

Rawhide is like the next release of Redhat that they're working on, from what I gather, and it's not supported. I'm sure that I've seen the phrase Use at your own risk used to describe it. Hence the lack of support. Supporting it (and I suppose this included providing docs) would

Re: sysreport

it == Ismael Touama [EMAIL PROTECTED] writes: it Hi, it i'm on 7.2, it Don't find 'sysreport' command anywhere, it Did find / -name sysreport and whereis sysreport... it I wanted to look at my installation and configuration, cause I guess it I don't have correctly

RE: sysreport

ok thanks i will try... but it's not logic cause I've got and I saw existence of 'sysreport' 7.1 !? -Message d'origine- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]De la part de Ed Wilts Envoye : jeudi 31 janvier 2002 17:24 A : [EMAIL PROTECTED] Objet : Re: sysreport On Thu, Jan

Re: duplicate kernel package problem.

On 31 Jan 2002 08:53:58 -0500 Jeff Bearer [EMAIL PROTECTED] implied: For some reason up2date kept saying that kernel-2.4.9-13 was available for update, and before I knew it I had kernel-2.4.9-13 installed 3 times. Each time I thought 13 was a new release, after I realized what was going on I

RE: readme

OOPS will keep caution in future Cheers Ani -Original Message- From: Jason Costomiris [SMTP:[EMAIL PROTECTED]] Sent: Thursday, January 31, 2002 8:10 PM To: [EMAIL PROTECTED] Subject: Re: readme On Wed, Jan 30, 2002 at 02:43:56AM -0800, Harry Putnam wrote: :

Re: where is cfdisk in rh 7.2?

On Thu, Jan 31, 2002 at 04:04:34PM +0100, LuisMi wrote: I can't find the cfdisk command into my redhat 7.2, where is it? It was removed due to buggishness or somesuch. I miss it too. -- Hal Burgiss ___ Redhat-list mailing list [EMAIL PROTECTED]

updates not over the web

just an odd question here just recently i updated my 7.2 box with all the new rpm's redhat released on their server but then it occured to me: what if i was in brazil with a dialup or something? downloading 1 or 2 hundred megs is a bit of a strain on my only phone line what do people do in this

Re: updates not over the web

At 1/31/2002 09:48 AM -0800, you wrote: what if i was in brazil with a dialup or something? downloading 1 or 2 hundred megs is a bit of a strain on my only phone line what do people do in this case? Yeah, rub it in why dontcha. (Just kidding.) Answer is, you're screwed unless you can find a

up2date: Invalid Server Certificate

hey all, Version=7.2 Every time I try to run up2date, with no options, I get the following error message: Error Class Code: 9 Error Class Info: Invalid Server Certificate. Explanation: An error has occurred while processing your request. If this problem persists . Anyone have

Re: updates not over the web

you'd think redhat would supply update cds at a reasonable cost... saves them bandwidth and could even turn a small profit - Original Message - From: Rodolfo J. Paiz [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, January 31, 2002 9:53 AM Subject: Re: updates not over the web

does redhat have this utility http://pfortin.com/Linux/LinkSys/logging.shtml

I discovered that mandrake has this feature does redhat have it? for remote syslog? http://pfortin.com/Linux/LinkSys/logging.shtml Thank you ___ Do You Yahoo!? Get your free @yahoo.com.hk address at

unfamiliar fdisk output.

Just a conicidence that I'm trying this while there is a cfdisk thread going on as well. I'm adding a second disk to a SCSI RH 7.2 system. The new disk has old freebsd partitions on it. The SCSI bios all checks out no conflicts or errors. SCSI ID's 0 existing drive 2 tape drive 3 new drive 7

Re: up2date: Invalid Server Certificate

Run rhn_register again, that's what I had to do with 1 system that did this for me. On Thu, 2002-01-31 at 13:11, Amanda Smith wrote: hey all, Version=7.2 Every time I try to run up2date, with no options, I get the following error message: Error Class Code: 9 Error Class Info: Invalid

Re: updates not over the web

At 1/31/2002 10:13 AM -0800, you wrote: you'd think redhat would supply update cds at a reasonable cost... saves them bandwidth and could even turn a small profit KRUD. http://www.tummy.com/krud Unfortunately not practical for most places in the world. Even if RedHat supplied the CD for free

RE: up2date: Invalid Server Certificate

Ok I'm going to try that, but what if you have no idea what your username is? -Original Message- From: Jeff Bearer [mailto:[EMAIL PROTECTED]] Sent: Thursday, January 31, 2002 1:19 PM To: [EMAIL PROTECTED] Subject: Re: up2date: Invalid Server Certificate Run rhn_register again,

RE: up2date: Invalid Server Certificate

look in /etc/sysconfig/rhn/up2date On Thu, 2002-01-31 at 13:29, Amanda Smith wrote: Ok I'm going to try that, but what if you have no idea what your username is? -Original Message- From: Jeff Bearer [mailto:[EMAIL PROTECTED]] Sent: Thursday, January 31, 2002 1:19 PM To: [EMAIL

Help! I need a provisory solution...

Hello list. I need help from you. I have a web/email server with some clients... The problem is... I'm moving to another house and my server will be down for some weeks Because my server have specific configurations, I need a provisory place to leave it. I have two possibilities, but I

Re: unfamiliar fdisk output.

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Jeff Bearer wrote: Command (m for help): p Disk /dev/sdb: 255 heads, 63 sectors, 1106 cylinders Units = cylinders of 16065 * 512 bytes 8 partitions: # start end size fstype

MAJOR bug in chpasswd?

In trying to get together a disaster recovery plan a good friend of mine Richard Rager wrote this script for me: #!/bin/sh # echo test for a in `cat users.txt` do { u=(`echo $a | cut -f 1 -d ':'`); p=(`echo $a | cut -f 2 -d ':'`); echo User: $u echo Password: $p adduser -s /bin/false $u

CD to mp3 ??

Hi all Can anyone suggest any software that converts CD tracks to mp3 on RH linux 7.2 ? Ive tried ripperX, but it doesnt work for me. Any ideas ? Thanks, Jatan ___ Redhat-list mailing list [EMAIL PROTECTED]

Bash problems [re-post]

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi all, Everytime I run a shell i get 'bash: : command not found' Worse, my screen is litterd with ': command not found' during boot and shutdown operations. What is happening and how can I restore sanity? Much thanks... - -- Nick Wilson

Re: CD to mp3 ??

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Jatan wrote: Hi all Can anyone suggest any software that converts CD tracks to mp3 on RH linux 7.2 ? Ive tried ripperX, but it doesnt work for me. Any ideas ? I used to use ripperX, but it seems to be broken on 7.2. Produces 0-byte mp3s

Re: Bash problems [re-post]

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Nick Wilson wrote: Everytime I run a shell i get 'bash: : command not found' Worse, my screen is litterd with ': command not found' during boot and shutdown operations. What is happening and how can I restore sanity? What's happening is that you

Re: CD to mp3 ??

David Talkington wrote I used to use ripperX, but it seems to be broken on 7.2. Produces 0-byte mp3s consistently, no matter what encoder I choose. grip is an option, but I haven't played with it much yet. thanks ill check out grip. should be available thru downloads.com ?? I think

Re: MAJOR bug in chpasswd?

It is not a bug in chpasswd, it is a bug in PAM. Get the pam updates from updates.redhat.com and install them. Then it will work fine. I filed a bugzilla report on this a day or two after 7.2 was released and never heard back, then did a bugzilla search last week to find the fix was

Re: CD to mp3 ??

grip works well, I've used it to make .oog files, I don't make mp3's anymore. On Thu, 2002-01-31 at 15:02, David Talkington wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Jatan wrote: Hi all Can anyone suggest any software that converts CD tracks to mp3 on RH linux 7.2 ?

Re: Bash problems [re-post]

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 * and then David Talkington blurted Everytime I run a shell i get 'bash: : command not found' Worse, my screen is litterd with ': command not found' during boot and shutdown operations. What is happening and how can I restore sanity?

Re: CD to mp3 ??

Jatan [EMAIL PROTECTED] writes: Can anyone suggest any software that converts CD tracks to mp3 on RH linux 7.2 ? Ive tried ripperX, but it doesnt work for me. Any ideas ? We don't ship any mp3 encoders, but we ship ogg. If you want a frontend (which looks up the CD in FreeCDDB, and asks you

Re: duplicate kernel package problem.

On Thu, 31 Jan 2002 10:29:02 -0600 ABrady [EMAIL PROTECTED] implied: On 31 Jan 2002 08:53:58 -0500 Jeff Bearer [EMAIL PROTECTED] implied: For some reason up2date kept saying that kernel-2.4.9-13 was available for update, and before I knew it I had kernel-2.4.9-13 installed 3 times.

Red Hat 7.0 php does not have gd?

I want to create graphics with php and gd, but it looks like the gd subsystem was not linked into the distributed version of php. I have: php-4.0.4pl1-3 gd-1.8.3-4 gd-devel-1.8.3-4 1) Is my assumption correct that gd was not linked in? I won't ask why not because I wouldn't like the answer

Re: CD to mp3 ??

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Jatan wrote: I used to use ripperX, but it seems to be broken on 7.2. Produces 0-byte mp3s consistently, no matter what encoder I choose. grip is an option, but I haven't played with it much yet. thanks ill check out grip. should be

Validating passwords via perl, Lil help please!

Hello everyone, I'm working on creating a web-based password changer, but have been having some trouble with the password verification process. I have verified the the username entered is an acutal user on the system with getpwnam($uname), and that works, but how can I verify that the old

ppp establishment problem to Cisco terminal server

I'm not sure if this solves your problem but I have had now luck using the red hat internet / modem config software. I have managed to get a connection using the kde internet dialler. Maybe you could try that for your internet connections. (Just a thought)

Re: updates not over the web

On Thu, 2002-01-31 at 12:26, Rodolfo J. Paiz wrote: Thank God in a few days I'm out of this country and back to Guatemala and my DSL line (flow-limited to 128Kbps, but what the hell). smile Out of curiosity, what do you have to pay for DSL in Guatemala? Bret

Re: Bash problems [re-post]

On 21:19 31 Jan 2002, Nick Wilson [EMAIL PROTECTED] wrote: | Okay, I've been messing around with the locale chooser in KDE and I | /think/ that's when the trouble started. It looks like it's actually | looking for a command ':' and it spits out that 'command not found' msg | on anything to do

RE: updating rpms using rpm

Hello. I tried now in two machines,upgrading first kernel as is described in Red Hat support documents and later upgrade all rpm packages without problem. Thanks Josep Begin of Quote Greg Wright : *** REPLY SEPARATOR *** On 28/01/2002 at 11:31 PM Josep M. [EMAIL

Re: Bash problems [re-post]

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 * and then Cameron Simpson blurted On 21:19 31 Jan 2002, Nick Wilson [EMAIL PROTECTED] wrote: | Okay, I've been messing around with the locale chooser in KDE and I | /think/ that's when the trouble started. It looks like it's actually |

Re: CD to mp3 ??

yes, grip works great downloaded bladeenc mp3 encoder for it to work .. thanks a lot! Jatan Trond Eivind Glomsrød wrote: Jatan [EMAIL PROTECTED] writes: Can anyone suggest any software that converts CD tracks to mp3 on RH linux 7.2 ? Ive tried ripperX, but it doesnt work for me. Any

Re: chpasswd problems...

I'm not sure what's wrong with your script (looks like it should work to me), but you might look into the 'newusers' command. It looks like it does the same thing as your script, but all in one command. Hope this helps, Ben On Thu, Jan 31, 2002 at 09:35:17AM -0500, Jim Bija wrote: Im trying

Re: Bash problems [re-post]

On 23:54 31 Jan 2002, Nick Wilson [EMAIL PROTECTED] wrote: | Typical causes for this are variables nnot set, yet being used. | | For example, a script saying: | | $cmdvar blah blah blah | | Would a line in an init script like | | XYZ= | | cause that? It could, if $XYZ was used as a

Re: How to find CPU consumption?

I have a php based webmail program installed on Intranet and also planning to install on Cobalt servers.Can anyone tell me how do I find out the CPU consumption for this app on Internet as well as on Intranet Run the top program on your intranet server and look at how much CPU the

Login to network question

Hello, Here in my college they are are starting to require proper authentication in order to log in. Where do I set the proper username, password and computer name to correctly log on? If I am not logged on correctly, I will be warned twice and then taken off the network. Sadly the IS

Re: Login to network question

what are you logining into??? NT or Novell??? Brian

Re: Login to network question

I dont know. I know that our intranet goes straight to the internet, no proxy or anything. I'll ask them tomrrow. On Thu, 2002-01-31 at 17:57, [EMAIL PROTECTED] wrote: what are you logining into??? NT or Novell??? Brian _ Do You

Blown BIOS, no boot

I' trying to reurrect an old 486 for use as a router. It became apparent that the battery, a Dallas Realtime clock, had seen better days, so I replaced it. Apparently that was a mistake. Lilo only gets to L, and the system won't boot from the recently made boot floppy. Both the hd's

Re: Validating passwords via perl, Lil help please!

That is basically what I have now to see if the user exists, but I can't use this because I'm using shadow passwords, the only thing that is in position 2 of /etc/passwd is x. So, anyone know of any other ways that I can achieve this? Thanks for the help though. Thanks, Jake - Original

Re: How to find CPU consumption?

Can u pls give us more info on MRTG and where can i find it - Original Message - From: Peter Kiem [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, February 01, 2002 6:22 AM Subject: Re: How to find CPU consumption? I have a php based webmail program installed on Intranet and

rpm hates me

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Fresh install of 7.2. Mounted all updates, did this (this is not the most organized sequence, but it is an accurate picture of what was, in this case, a quick and dirty manual process): # cd updates/os/i386 # rpm -Fvh

Re: How to find CPU consumption?

[ PLEASE trim content to just the relvant bits, and reply _below_ the quoted text. ] On 08:57 01 Feb 2002, Ashwin Khandare [EMAIL PROTECTED] wrote: | Can u pls give us more info on MRTG and where can i find it See this: http://freshmeat.net/search/?q=mrtg -- Cameron Simpson, DoD#743

Re: Blown BIOS, no boot

Did you get an error code along side the L? Werner Almesberger's LILO User's guide, sections 5.2.1 and 5.2.2, page 44, documents these codes to tell you what's going on. If you can't get to this document, post the code and I'll get the info to you. (There's 16 different possibilities). On

Re: Validating passwords via perl, Lil help please!

Hi Jake, That is basically what I have now to see if the user exists, but I can't use this because I'm using shadow passwords, the only thing that is in position 2 of /etc/passwd is x. So, anyone know of any other ways that I can achieve this? Thanks for the help though. I did this by

Re: Calendar/scheduling tools?

Our local Linux User Group has a fairly nice one (http://www.satlug.org/cgi-bin/webcal/webcal.cgi?function=webmonthcal=SA TLUG) that is called WebCal, available here: http://bulldog.tzo.org/webcal/webcal.html Chris On Tue, 29 Jan 2002 11:17:26 -0800 (PST) fred pasteck [EMAIL PROTECTED] wrote:

Re: How to find CPU consumption?

Hi Ashwin, Can u pls give us more info on MRTG and where can i find it MRTG is a graphing program that runs scripts every 5 mins to record data and graph this data in daily, weekly, monthly and yearly charts. You can download MRTG from http://www.mrtg.org My CPU script is: #!/bin/bash #

Re: CD to mp3 ??

please dont mind if i sound sheepish ... but what is oog ?? any pointers to good sites where I can learn more about it ?? Thanks :) Jatan Jeff Bearer wrote: grip works well, I've used it to make .oog files, I don't make mp3's anymore. On Thu, 2002-01-31 at 15:02, David Talkington wrote:

Re: Blown BIOS, no boot

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 John P Verel wrote: Did you get an error code along side the L? Werner Almesberger's LILO User's guide, sections 5.2.1 and 5.2.2, page 44, documents these codes to tell you what's going on. If you can't get to this document, post the code and I'll

Re: CD to mp3 ??

Jatan [EMAIL PROTECTED] writes: please dont mind if i sound sheepish ... but what is oog ?? any pointers to good sites where I can learn more about it ?? A typo for ogg. It's a different (many, including me will claim better) soundformat than mp3, and is not patent encumbered.

Re: Looking for redhat LUG in spanish

www.linux.or.cr LuisMi wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Do you know about any redhat LUG where the people talk in spanish? - -- +-- | Luis Miguel Cruz. | | Public Key:

Re: Validating passwords via perl, Lil help please!

That would help out a lot, maybe then I could either use the php code, or somehow use that in my cgi script. Thanks, Jake - Original Message - From: Peter Kiem [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, January 31, 2002 10:55 PM Subject: Re: Validating passwords via perl,

Re: Bash problems [re-post]

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 * and then Cameron Simpson blurted It could, if $XYZ was used as a command later. Well, did I say earlier that I'd been messing with locale? I think I did. It turned out that for some unknon reason there was a ^Q char sitting on a line at the

how to open another port using lokkit ?

At the moment, I'm using lokkit to only allow ssh and http connections to my machine. I have a custom application that runs on port - how can I enable this with lokkit. So far, I'm doing this in Lokkit : 1. Select high security: [x] High Security [ ] Medium Security [ ] Low

Serial interrupt programming

Hello, I would like to program a serial interrupt under Linux in an ANSI C code. Where can I found information and examples? Thank you Fabio Degiovanni -- Dott. Ing. Degiovanni Fabio EICAS Automazione S.p.a. Via Vincenzo Vela, 27 10128 Torino (ITALIA) Telefoni +39-11-562.37.98/562.3088

Broken atd rpm

Hello All, Anyone experienced a broken atd rpm as per latest errata ? system 6.2, postfix, standard dirs, install rpm.. will not start I have not dug around as yet, but SRPM will not build even when sendmail is removed as a req. if you have a quick fix, can you mail me off list ?