I have asked them and they only said I should use
their web mail instead, their service is not available
for out look express mail and udora , bla bla.. even
they do not say anything technically...; They have a
web based email for their customers but I would like
to set my own smtp because I use
they wont accept smart
relay at their host as they said stupid things like I
said to you before so we just ignore it anyway
--- Mikkel L. Ellertson [EMAIL PROTECTED]
wrote: On Sun, 6 May 2001, Steve Kieu wrote:
I have asked them and they only said I should use
their web mail instead
Just a small thing, I once use
dd if=image of=/dev/fd0
bootting use that disk sometimes is ok, sometimes
failed. I use the same floppy and change the command
to
dd if=image of=/dev/fd0 bs=1k
it works.
And I ususally failled if I use cat like
cat image /dev/fd0
--- David Talkington
Hi,
I got two ISP one it has pop3 and smtp service ; wth
that one I have no problem using sendmail and
fetchmail in my box ; But the other doesn't support
pop3 mail and smtp; then I can not use sendmail; I
think as I use my own smtp server and pop3 but they
block port 25 (just guess) then the
I got is not pure !?
--- Bret Hughes [EMAIL PROTECTED] wrote: Steve
Kieu wrote:
Hi,
I have never found anyone having this problem yet
but
I had!. When I compile the kernel modules, I got
this
error message
parport_pc.c in function parport_pc_find_ports
2618
too many
Hi,
I have never found anyone having this problem yet but
I had!. When I compile the kernel modules, I got this
error message
parport_pc.c in function parport_pc_find_ports 2618
too many arguments to function parport_pc_init_superio
Error 1
As I dont subscribe to the kernel mailing list, but
Hi all,
I got a used modem here which I beleive it is Mwave
sound/modem (ACP) MDSP2780 ; but I had no luck with
the driver in IBM page. I thought this driver may only
be used in the IBM Thinkpad machine not others, as I
plug my modem to the different machine. But the thing
is the DOS/WIN driver
Hi,
I got one of those but may be it is rather old. I have
to initialize the cdrom using a DOS driver (boot into
DOS then initialize the adapter; then boot into Linux
load modules frpw and pcd ; If I dont do that load pcd
will say error Cd ROm not found.
I have read a document about this
Hi,
Is there any way of checking badblocks while running
mkreiserfs ? Or any programm to do that job, checking
bad blocks and mark it etc ... with reiserfs
Regards, Steve
=
S.KIEU
__
Get personalized email addresses from Yahoo! Mail - only
Hi,
Anyone here using reiserfs?
How about other's experience using reiserfs.
In my case it reduced the disk space rather much and
starting programm faster. But not sure for other's.
I use notail options
I got the problem whenever I reboot or halt the
system, I got the message
clm-6005
not detect this. I think I have to
work around it but not sure how.
Any ideas pls?
--- Jason Costomiris [EMAIL PROTECTED] wrote: On
Tue, Jan 09, 2001 at 09:03:08PM -0800, Steve Kieu
wrote:
: I am struggling to make alsa work with kernel
2.4.0
: but not succesful. Use gcc 2.95.2 kernel 2.4.0
:-) ; Just
wait when it finished
Any ideas?
--- Jason Costomiris [EMAIL PROTECTED] wrote: On
Tue, Jan 09, 2001 at 09:03:08PM -0800, Steve Kieu
wrote:
: I am struggling to make alsa work with kernel
2.4.0
: but not succesful. Use gcc 2.95.2 kernel 2.4.0
get alsa-driver 0.5.10a, it fixes your
Yeah it works
--- Steve Kieu [EMAIL PROTECTED] wrote: I try to do
these things but as the compilation hs
not
finished so I have not tested it yet.
I modify the file in ./include/driver.h and comment
out the code
/ * #ifdef CONFIG_PCI comment out by me */
#include linux/pci.h
Hi,
I am struggling to make alsa work with kernel 2.4.0
but not succesful. Use gcc 2.95.2 kernel 2.4.0
- first wrong with the wavefront.c; I corrected it
(something about the loop_per_sec change to
loop_per_jiffy not remember exactly) then wavefront.c
is Ok;
- but when go to another file
Hi all,
Today I discover that my /var/log/dmesg has a very
strange ownership, not understand why. At boot up I
saw:
/etc/rc.d/rc.sysinit. /var/log/dmesg Operation not
permited
then I try to check it. Wooho, the file is more than
16Mb and I can not remove it by any means, and it has:
owner
Well, I have an ISA modem KTX 33.6 based on
Rockwell
chip set RCV336 ACF/SVD and Crystal Sound card
CS4239
and I have been struggling for two days to make it
work together. First of all the modem is non
standard
serial port, (COM3 IRQ5) so have the non standard
serial port enable in kernel and
Hi, all I think it is too soon to say but the
performance is worse that if I run 2.2.17 with my
computer, My computer hang once with 18 after rather
long up time, never like that in 2.2.17. And yeah,
other performance seems to be worse. Now I try to
switch back to 17 and run in teh same
Just type
ifconfig
is Okay to find
--- christopher j bottaro [EMAIL PROTECTED] wrote:
is there a command to find out my ipaddress?
thanks...=)
___
Redhat-list mailing list
[EMAIL PROTECTED]
Would you pls tell us your hardware configuration?
This is really weird;
--- Bret Hughes [EMAIL PROTECTED] wrote: Duane
Clark wrote:
On Sat, 16 Dec 2000, Huiyuan Ma wrote:
Hi,I have a funny problem while booting the
redhat
7.Whenever it boots,it shows an error message of
That is you are luckier than me at least you have it
run, I never be succesful installing NS6, the
installer always fails , can not install xpi. file or
something. So I took my d*** off that
A.. Long time a go, when I just download a big (not
so big if compares to Com 4.7x ) and run the
I just check my box and it does not happen. I did not
do anything so far, my box if RedHat 6.0 modified from
updates , Netscape 4.76... Before I use slackware and
I have to do something lile INSERT_LINK_FIX=1 (not
exactly, you can go to Netscape home page and read
product release note) But when I
21 matches
Mail list logo