AS stated in one of my posts, it's 144.510 MHZ. the remainder of the
equipment used to assist with eliminating this problem is as
follows. a Wacom WP641 duplexer, BpBr With an Additional BAnd Pass
cavity tuned to my receive frequency, also a Notch filter, a 5 pole
Helical front end feeding a
Here is some info for connecting a CAT controller to a RP-1520.
The pinout on the 1520 should be the same as the RP-1220.
Not sure if you have a RP-1210 or a RP-1220
-Sean
On Mon, 9 Aug 2004, Gary Kohtala wrote:
I am trying to figure out how to interface an Icom 1.2 ghz
repeater to an
Thanks to all that replied to my post regarding this problem. This is a
back burner
project currently, so I have not had the chance to implement any of the
suggestions yet, but will post the results when I do. Thanks and 73,
Kevin, K9HX
At 10:20 PM 8/5/2004, you wrote:
John Sichert wrote:
I have a neighbor who works for a cellular carrier, and had the old FCC
First Class Radio Telephone license.
First question, is that license still required for techs at tv and radio
stations or did the FCC drop the requirement?
Is there a place on the web to search a license database?
They are
I am in the final stages of putting together a 2-meter Micor repeater.
As a general rule, I am against receiver pre-amps on any repeater
installation. However, while rummaging thru my junkbox this evening,
I came across one of these preamps and started wondering. Has
anyone had any experience with
Interference can be a difficult thing to find, I do this at work
quite often. Let's see what we have so far:
1) The Motorola Nucleus 900 Mhz paging transmitter has a hisotru of
the PA creating broadband noise. You do not have broadband noise,
you have two signals 20Khz wide at 144.510 and
Hi Frank:
The First Class Radiotelephone Operator's License was replaced with
the General Radiotelephone Operator's License nearly 20 years ago.
Approximately equivalent to the old 2nd Class license, the GROL is
only needed for aviation, marine, and international public fixed
stations.
These
On Wed, 11 Aug 2004 01:40:55 -0400 Russ Hines [EMAIL PROTECTED] writes:
I'm not aware of any database for commercial licensees, but if there
is one, I'd guess either the FCC, NARTE, ISCET or NRE might likely
post it on the web.
Funny this topic should come up on two lists within a day...
Go
Did you check if your spectrum analyzer to see if its being overloaded, some
spectrum analyzers don't handle strong signals too well? Do you have an
isolator and a bandpass cavity on your transmitter? Did this interference
just started? Does this interference just happens when the Nuc is in the
Also remember there is still a requirement for radar endorsement if you are
working on ships radar or microwave.
Gregg R. Lengling, W9DHI, Retired
Administrator http://www.milwaukeehdtv.org
K2/100 S#3075 KX1 S# 57
Member: ARRL, RSGB, RCA, WERA and ORC
-Original Message-
From: Russ
Mike, ilq, check your ilq e-mail!!
Will
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject to:
Hello Frank and the list.
No the FCC does not require a 1st any longer but most broadcast stations do.
Your buddy should have traded his 1st for the new GROL. That is need to get
a job with many broadcasters (TV/Radio).
The FCC.gov ULS/FRN system lists tickets held.
Very best,
Russ, W3CH
-
If there's a JR or SR in the file, that goes after a space and before the
comma. The search won't return an entry with those unless you include those
suffixes in the search.
Steve, AA5SG
- Original Message -
From: JOHN MACKEY [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent:
The first Class RadioTelephone license he has would have expired nearly 20
years ago. At the time, it was replaced by a license with a different name
that license was for life. The grand-fathering for the lifetime license has
long since passed.
That is why you are not finding it in a license
Got this off the Tower Pro group, check out this site for you questions.
http://wireless2.fcc.gov/UlsApp/UlsSearch/searchLicense.jsp
I have not been able to find my old FCC license, found my Ham license but no
General Radiotelephone!
Paul
-Original Message-
From: Russ Hines
I found my old General Radiotelephone that was converted to lifetime in
1985. No record of the old 1st and 2nd Class Radiotelephone, however.
Use "last name, first name" on the search.
Marv Hoffman, WA4NC
PG057703
Paul Finch wrote:
Got this off the Tower Pro group, check out this site
I
still can't find my "General" radiotelephone license! I wonder if it was
cancelled! I kept it up for the whole time until it was ported over to the
General class useless thing, I would like to know it's still there. I also
though it had been converted to lifetime!
Paul
-Original
Yep, it shoulda been converted in 1985 or
about. Didn't they send you a new certificate?
I tried Slusser, John and got my radiotelephone
license. The database doesn't show the radar endorsement. Don't know
why, however, I haven't needed it. To find my ham call I had to use
Slusser Sr,
John,
Saw your pic and the article on you in Sept's
QST. Congrats OM! ;)
Kevin
K2KMB
in Sparta NJ
(I've
talked to you on Echolink on my machine, and on Earl's once or twice.)
;)
From: WD7F - John in Tucson
[mailto:[EMAIL PROTECTED] Sent: Wednesday, August 11, 2004 11:13
AMTo:
I certainly agree. He seems to do that very infrequently.
Neil
sgreact47 wrote:
Mike, ilq, check your ilq e-mail!!
Will
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group,
At 08:13 AM 8/11/2004 -0700, you wrote:
Yep, it shoulda been converted in 1985 or about. Didn't they send you a
new certificate? I tried Slusser, John and got my radiotelephone license.
The database doesn't show the radar endorsement.
---It not only showed my radar endorsement but also
Here you go Neil:
ULS License
Commercial Operator License - PG1318833 - MC KIE, NEIL E
Call Sign PG1318833Radio Service CM - Commercial Operator
Status Active Auth Type Regular
Dates
Grant 03/21/1985 Expiration
Effective 03/21/1985 Cancellation
What is the diameter, length and material used
for the cavity you completed? What type of probe
are you using?
skipp
mrhquin [EMAIL PROTECTED] wrote:
Hi
Since I posted the last msg I have built two cavitys and tested them
both are working well but don't have the narrow notch I require.
Just received my maggorie transmitter to replace my smoked Spectrum
transmitter..
on my 2 meter machine. will Let you know how it works Out for me..
Neal-ka2caf
145.23 Monroe Twp,NJ
224.50
russ wrote:
Hello Frank and the list.
No the FCC does not require a 1st any longer but most
Thank you ... I got my 2nd Class RadioTelephone license in 1960
just a few weeks after getting my ham license.
When it came time, I filed for and got the lifetime General Class
License. It somehow got lost in that last move as did the other
certifications: the one from Naber and
Anyone know where I can find the above? Thanks.
Bob NO6B
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject
I just got a hold of two ICOM GR8520 25-watt FM repeater in the 320-340 MHz
band.
Has anyone ever heard of any repeater equipment in the gov't air/ground comm
and Navigation Aid band?? We have glide slope transmitters in that band in the
330 MHz area.
Has anyone had any experience in this
Paul,
It's on the 18th page of a search by licensee name
for Finch, Paul.
Callsign PG1021633
wayne
- Original Message -
From:
Paul Finch
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, August 11, 2004 9:19
AM
Subject: RE: [Repeater-Builder] Question
Kevin,
I heard that they had accepted the article
submitted by K7IOU. Didn't know the Sep. issue was out.
Thanks.
John in Tucson
- Original Message -
From:
Kevin Bednar
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, August 11, 2004 8:14
AM
Subject: RE:
Yep. Just got the issue yesterday John.
;)
Kevin
From: WD7F - John in Tucson
[mailto:[EMAIL PROTECTED] Sent: Wednesday, August 11, 2004 6:18
PMTo: Repeater-Builder@yahoogroups.comSubject: Re:
[Repeater-Builder] Question for the group
Kevin,
I heard that they had accepted the article
30 matches
Mail list logo
