I'm suspecting the ferro cap after looking at it. It seems to have some oily
residue on the top of the can so maybe it has been leaking. I'm unable to
check capacitance but I did pull the leads of and check with my DMM on ohm
range and its not shorted. It will start to charge up on the
I found a 7uf 660vac from Allied part no #591-7040 will that work?
-Original message-
From: Jeff DePolo [EMAIL PROTECTED]
Date: Fri, 09 Feb 2007 16:18:00 -0800
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Spam] RE: [Repeater-Builder] Mastr II Station Power Supply
Problem?
I'm
It is definitly the 35amp power supply it has the large fuse holder on the back
and the model number shown in my post looks up as a high current power supply
capable of the 110watt station.
I'm going to check the ferro cap and report back!
-Original message-
From: Nate Duehr [EMAIL
Hi Jeff!
Thanks for the reply.
The no load voltage is about 14.1 volts.
Bill...
-Original message-
From: Jeff DePolo [EMAIL PROTECTED]
Date: Mon, 05 Feb 2007 16:28:07 -0800
To: Repeater-Builder@yahoogroups.com
Subject: [Spam] RE: [Repeater-Builder] Mastr II Station Power Supply
Hi Ralph,
Thanks for the info that's what I have been looking for. My station has the
P58 version of the controller which I believe is Tone Remote/Repeat controller.
The only problem is it has been setup simplex as a tone remote base. How do I
remove receiver muting on this controller and
5 matches
Mail list logo
