Way off topic.
One comment then everyone please drop this thread?!?!
In the '70's, you could ask for A Radio Check any time, on any channel, and
someone would come back with their location, (10-20), signal
From Bruce in Texas, KE5TPN
Never knew this person but 73 and 88 to all who were close to him.
NEVER DISRESCECT THE SILENT KEY!
RPI my friend, RPI. May the Skip be with you always!
Bruce Bagwell in Texas
KE5TPN
Hey Skipp,
I always value your advise but had to call you on this one.
It is the Four-Part Trilogy (Yes, it is A COMEDY for sure!)
Called, The Hitchhikers Guide to the GALAXY
BTW, Don't forget your TOWEL!
73
Bruce
KE5TPN
went down the tower or Guy wires, but enough went
through the not turned-on Astron. No doubt A mess but at least the Power
X-Former was still OK.
Speaking of Lightning, some head into this area right now. Gotta go!
All comments here were meant as SARCASM!
Bruce Bagwell
KE5TPN
The United
Bruce Bagwell
KE5TPN
If You Can Read This,
Thank A Teacher.
If You Are Reading This in ENGLISH,
Thank A Veteran or Current Soldier!
Support Our Troops!
For Without Them,
We Have No Support at All!
To all list members -
Please keep a close eye out for the following items which were stolen
from
I had no problem with the attachment.
You do need Adobe Acrobat Reader to open this. If you do not have Adobe
Reader, download it and I bet the attachment will open.
I don't have the address handy but do A search for Adobe Acrobat Reader
Download. I will bet you will be OK then.
Bruce
one group will
pick the flag up and run with it!
Bruce Bagwell
KE5TPN
If You Can Read This,
Thank A Teacher.
If You Are Reading This in ENGLISH,
Thank A Veteran or Current Soldier!
Support Our Troops!
For Without Them,
We Have No Support at All!
Hello I hope Everyone is doing Well , Some
people at our club who will just
about bend over backward to help or teach you. Give you extra unneeded
equipment, teach how to make A simple first wire antenna, etc.
No Class Warfare Here!
Bruce Bagwell
KE5TPN
- Original Message -
From: Nate Duehr
To: Repeater-Builder@yahoogroups.com
I agree with most of the replies. Myself have never been up A tower. While I
did not expect it to be a training video, the only real bit on safety was the
Inspection. It showed a barrel full of Junk (Did NOT pass Inspection)
safety gear but she passed with flying colors?
I think it was MUCH
THANK YOU SCOTT!
Well said!
Myself, I don't even understand what others are having a problem with.
What was that lineCan't we all just get along?
Thanks again. Good Job!
Bruce
KE5TPN
No, I don't feel as though vacations are in order in this situation. The
recent comments being posted,
I figured that was A local code, not NEC. The only reason I can think of for
that requirement is the ampacity of the 12 or 14 ga wires. While we all know,
in actual use, 2 or more outlets strung along will not all have 15 amp or
higher loads in EACH outlet. However, theoretically, each outlet
tickled
Glad I knew what was going on or else I might have made full contact, and I
would not be typing this right now!
Swapped the HOT/Neutral/Ground and all was OK!
Always remember, just because the outlet is Grounded does not mean it is
really Grounded Verify!
Stay safe out there!
Bruce
it along.
BroadBand Via PowerLine is BAD for us unless THEY can PROVE that it will NEVER
INTERFERE with our COMM's!
Bruce Bagwell
KE5TPN
.
,etc.
Same offer.
Also, MANY SAMS PhotoFacts for CB radio and Scanners from the 1970-1980 era
+/-3 years?
I can probably scan small sections if needed.
Pics, etc are available, Prices neg.
Contact me OFF LIST.
KE5TPN AT swbell DOT net
Thanks for the previous help!
Bruce Bagwell
OK guys, along this same line, I have a VHF all copper J-Pole and plan on
building UHF all copper J-pole.
Is common clear lacquer OK to prevent corrosion on the copper elements? I have
used automotive type black silicone under 2 wide electrical tape to seal
connections and the coax itself.
breaker and that should help the life of everything
without the Hard Turn-On Surge\
Now I have the 12VDC power to run almost any mobile radio as A Base rig.
Thanks again to all those who helped!
Bruce Bagwell
KE5TPN
-Original Message-
From: Bruce Bagwell [EMAIL PROTECTED]
Sent: Apr 8, 2008 1
Every repeater in my area ID's on the hour. Sounds to me like it is either the
freq. (rate) of the ID, (Say every 15 Min.) or the reference to the website
(More likely) that the FCC is having problems with. But MAINLY this station
seems to be interfering with another station on A nearby freq.
!
The Repeater Builder Site is A wealth of info for sure!!
Bruce Bagwell
KE5TPN
I wrote:
I already know this is UHF mobile unit. I have the connector and cable
(s). What I need to know since I am new to all this RF stuff and think
this would make a good project is, is this all here?
Unit
The label says 136-174Mhz And was set to 153.92.
10-20W In=200-250W Out.
[EMAIL PROTECTED] (Fuse is 40A)
120VAC for cooling fan only
P/N PA3-1FF and hand etched the letters RF
It appears to be similar to the other PA3's according to manuals
found on Repeater-Builder Website but with more power.
Thanks,
I finally figured this critter out last night. I found the P/N on that SCR
barely readable, but there. It was the 2N681, that Astron told be it was.
Further checking shows it to be 25V/25A. Light! That's probably why they went
to that 50V/65A unit that crosses to nothing!
I found all I
20 matches
Mail list logo