Eric Lowell
Eastern Maine Electronics Inc.
48 Loon Road
Wesley ME 04686
eme@starband.net
www.satnetmaine.com
207-210-7469
From: Paul Holm
To: Repeater-Builder@yahoogroups.com
Sent: Thu, August 19, 2010 10:25:51 PM
Subject: Re: [Repeater-Builder] antenna plan
Mods.dk has a schematic.
Eric Lowell
Eastern Maine Electronics Inc.
48 Loon Road
Wesley ME 04686
eme@starband.net
www.satnetmaine.com
207-210-7469
From: Milt
To: Repeater-Builder@yahoogroups.com
Sent: Mon, May 24, 2010 8:48:33 AM
Subject: Re: [Repeater
Seems like that happened a while ago.
Eric Lowell
Eastern Maine Electronics Inc.
48 Loon Road
Wesley ME 04686
eme@starband.net
www.satnetmaine.com
207-210-7469
From: Mike Besemer (WM4B)
To: Repeater-Builder@yahoogroups.com
Sent: Sat, May 1, 2010 3:17:16
I worked for a paging company years ago, and we used Visio to diagram the
towers for MPE (maximum permissible exposure) compliance work.
Visio is not specific to tower drawing, and I found it non-intuitive to use.
Having said all that, It did the job.
Eric Lowell
Eastern Maine Electronics Inc
LDF4 with the non-plated connectors, well waterproofed, will last a decade+.
GL de W1EL
Eric Lowell
Eastern Maine Electronics Inc.
48 Loon Road
Wesley ME 04686
eme@starband.net
www.satnetmaine.com
207-210-7469
From: Kris Kirby
To: Repeater-Builder
It will work, you just have to bond each 10' section to the next with something
other than soft solder. Lightning will blow lead solder right out of a joint.
Cadweld would probably be best.
GL, Eric
Eric Lowell
Eastern Maine Electronics Inc.
48 Loon Road
Wesley ME 04686
eme@starban
under power
rather than with a network analyser. This occured many years ago, so my memory
may be faulty.
Best Regards de Eric (W1EL)
Eric Lowell
Eastern Maine Electronics Inc.
48 Loon Road
Wesley ME 04686
eme@starband.net
www.satnetmaine.com
207-210-7469
Wow! I would have thought it illegal under Federal Law. What do I know
Best Regardss, de W1EL
Eric Lowell
Eastern Maine Electronics Inc.
48 Loon Road
Wesley ME 04686
eme@starband.net
www.satnetmaine.com
From: ka9qjg1
To: Repeater-Builder
Cushmans used low value fuses for years.
Eric Lowell
Eastern Maine Electronics Inc.
48 Loon Road
Wesley ME 04686
eme@starband.net
www.satnetmaine.com
207-210-7469
From: James
To: Repeater-Builder@yahoogroups.com
Sent: Tue, January 5, 2010 5:30:00 PM
He'll get as far or further than the hundreds of RG58 installations I've seen.
I was at least attempting to offer a helpful opinion rather than trolling.
Eric Lowell
Eastern Maine Electronics Inc.
48 Loon Road
Wesley ME 04686
eme@starband.net
www.satnetmaine.com
20
27;d think you could talk
quite a ways on 25 watts at 70 feet HAAT. 75-100 miles?
GL, Eric
Eric Lowell
Eastern Maine Electronics Inc.
48 Loon Road
Wesley ME 04686
eme@starband.net
www.satnetmaine.com
From: Vernon Densler
To: Repeater-Builder@yahoogroup
t the newer stuff.
GL de W1EL
Eric Lowell
Eastern Maine Electronics Inc.
48 Loon Road
Wesley ME 04686
eme@starband.net
www.satnetmaine.com
--- On Wed, 10/14/09, J wrote:
From: J
Subject: [Repeater-Builder] Radio conversion to 225MHZ
To: Repeater-Builder@yahoogroups.com
Date: Wednesday, Octob
. You may have heard this
before.
Good Luck, Eric (W1EL)
Eric Lowell
Eastern Maine Electronics Inc.
48 Loon Road
Wesley ME 04686
eme@starband.net
www.satnetmaine.com
--- On Tue, 10/6/09, W3ML wrote:
From: W3ML
Subject: [Repeater-Builder] Re: Radio for repeater use Response to Tom
I have seen a bad deviation pot cause the sort of problem you describe.
Eric Lowell
Eastern Maine Electronics Inc.
48 Loon Road
Wesley ME 04686
eme@starband.net
www.satnetmaine.com
207-210-7469
--- On Tue, 10/6/09, Vernon Densler wrote:
From: Vernon Densler
Subject: RE: [Repeater
can find, and your budget. I much prefer commercial equipment over ham rigs.
Good Luck de W1EL
Eric Lowell
Eastern Maine Electronics Inc.
48 Loon Road
Wesley ME 04686
eme@starband.net
www.satnetmaine.com
--- On Sun, 10/4/09, W3ML wrote:
From: W3ML
Subject: [Repeater-Builder] Radi
can find, and your budget. I much prefer commercial equipment over ham rigs.
Good Luck de W1EL
Eric Lowell
Eastern Maine Electronics Inc.
48 Loon Road
Wesley ME 04686
eme@starband.net
www.satnetmaine.com
--- On Sun, 10/4/09, W3ML wrote:
From: W3ML
Subject: [Repeater-Builder] Radi
My 1965 vintage UHF T-power book says that there are 26 tones from 82.5 to
192.8, but doesn't show a list.
I don't have a twin Vee book or anything earlier, sorry.
Best regards, W1EL
Eric Lowell
Eastern Maine Electronics Inc.
48 Loon Road
Wesley ME 04686
eme@st
that doesnt bend
sharp enough to get to connectors.
Humor mode on: Maybe that why paging has largely gone by the wayside ;mode off
We never used superflex outside though, apparently some of the jackets were not
rated for sun exposure.
Best regards de W1EL
Eric Lowell
Eastern Maine Electr
. Not pretty but seems
to work.
"this is only temporary, unless of course, it works" Red Green
73 de W1EL
Eric Lowell
Eastern Maine Electronics Inc.
48 Loon Road
Wesley ME 04686
eme@starband.net
www.satnetmaine.com
--- On Wed, 9/9/09, Don Kupferschmidt wrote:
From: Don Kupfers
and you don't
have to fiddle with that part.
as always - YMMV
Best Regards, Eric W1EL
Eric Lowell
Eastern Maine Electronics Inc.
48 Loon Road
Wesley ME 04686
eme@starband.net
www.satnetmaine.com
--- On Wed, 9/9/09, hbbcara wrote:
From: hbbcara
Subject: [Repeater-Builder] Rebui
Cushcraft used to have that antenna. Since discontinued.
Regards de W1EL
Eric Lowell
Eastern Maine Electronics Inc.
48 Loon Road
Wesley ME 04686
eme@starband.net
www.satnetmaine.com
--- On Sat, 8/8/09, Doug Rehman wrote:
From: Doug Rehman
Subject: [Repeater-Builder] 2M Vertical
Yahoo seems to take several days to execute changes. I changed an e-mail
address for one group and it took nearly a week. I had about given up when the
emails began going to the new address.
GL de W1EL
Eric Lowell
Eastern Maine Electronics Inc.
48 Loon Road
Wesley ME 04686
eme
Greetings,
I am considering adding a 2m remote base to my RC-100 controlled UHF machine.
Looking for recommendations of specific radios to use, along with any to avoid.
I would like to use the BCD frequency agility of the controller.
Thanks and best regards de W1EL
Eric Lowell
Eastern Maine
ed to invert the COS.
Audio is another issue, The IC solution is probably best, less likely to build
in distortion than with perfboard transistor circuit
Eric Lowell
Eastern Maine Electronics Inc.
48 Loon Road
Wesley ME 04686
eme@starband.net
www.satnetmaine.com
207-210-7469
--- On Mon, 7/13/09,
itter involved. In any case, it
won't hurt to look at the duplexer, but I wouldn't think that was the issue,
unless it has given problems before.
Good Luck with it! Keep us posted.
Regards de W1EL
Eric Lowell
Eastern Maine Electronics Inc.
48 Loon Road
Wesley ME 04686
eme..
Charlie,
I have a completed one, along with the TX converter and a 10w, (might be
20) amp.
Do you need info or are you looking to purchase?
Regards, de W1EL
Eric Lowell
Eastern Maine Electronics Inc.
48 Loon Road
Wesley ME 04686
eme@starband.net
www.satnetmaine.com
207-210-7469
Can you define and describe what you mean by echoing? I've not heard that term
used with regard to a repeater. Might be a regional usage?
Thanks, de W1EL
Eric Lowell
Eastern Maine Electronics Inc.
48 Loon Road
Wesley ME 04686
eme@starband.net
www.satnetmaine.com
207-210-7469
--- On M
What frequency are you on?
I'll need to look at a schematic to come up with much.
73 de Eric
Eric Lowell
Eastern Maine Electronics Inc.
48 Loon Road
Wesley ME 04686
eme@starband.net
www.satnetmaine.com
207-210-7469
--- On Fri, 6/26/09, w4sef wrote:
From: w4sef
Subject: [Rep
I looked through my notes on the UHF version and I did'nt see anything tricky
there. What do you mean by specialized equipment?
73 de W1EL
Eric Lowell
Eastern Maine Electronics Inc.
48 Loon Road
Wesley ME 04686
eme@starband.net
www.satnetmaine.com
207-210-7469
--- On Thu, 6/25/09,
Seems like I used to have to inject the IF freq and tweek that up first.
UHF or VHF? I'll look at my manuals tomorrow.
E
Eric Lowell
Eastern Maine Electronics Inc.
48 Loon Road
Wesley ME 04686
eme@starband.net
www.satnetmaine.com
207-210-7469
--- On Thu, 6/25/09, w4sef wrote:
y I/O; RF, power, telephone,etc. Solved
lots of post T-storm calls.
As always- Best Regards and YMMV!
Eric Lowell
Eastern Maine Electronics Inc.
48 Loon Road
Wesley ME 04686
eme@starband.net
www.satnetmaine.com
207-210-7469
--- On Thu, 6/25/09, r_s_s_i wrote:
From: r_s_s_i
Subject: [Rep
without?
Also, you used to be able to get small clip-on ferrite chokes at Radio Shack, A
bunch of those on the cat-5 audio/control cableing might help clean that up.
Last bunch I got came from AllElectronics.
YMMV!!
Good Luck, Eric
Eric Lowell
Eastern Maine Electronics Inc.
48 Loon Road
Wesley
32 matches
Mail list logo