heh-maybe you've been down this path, but try unplugging the controller
and see if the repeater can be brought up. If it does, you have an
internal path somewhere.
n9lv wrote:
> That is what I thought was wrong first of all, tried it both ways and
> no change either way. I thought for sure wh
I believe that is only available in the digital series where
programming is done via the rib. This one is the eprom analog
setup. I am thinking there must be another control line going to the
controller that I am missing.
Mathew
- In Repeater-Builder@yahoogroups.com, "n9wys" <[EMAIL PROTECTE
Mathew,
Try programming it for "tone only" control (I believe that is option "S" in
both Repeater Control and Receiver Control. Mode Information screen) - this
way even if the station hears a carrier, it wont "react" to it.
I'm planning on doing that with my station - right now it's set for "SC"
That is what I thought was wrong first of all, tried it both ways and
no change either way. I thought for sure when I wired up the
controller that it was fine, but not sure when the other repeater
came into the picture. I am going to check the switches today and
see if there is anything there
4 matches
Mail list logo