Re: [Repeater-Builder] TKR-820 CTCSS/DCS EEPROM

it, but maybe I didn't look close enough. Jeff, KB1SPH / WQEX694 -- From: "DCFluX" Sent: Friday, July 16, 2010 12:35 AM To: Subject: Re: [Repeater-Builder] TKR-820 CTCSS/DCS EEPROM > Hey, I didn't need DCS at the time. > >

Re: [Repeater-Builder] TKR-820 CTCSS/DCS EEPROM

gt;> I hope that clears it up a little more. >> >> Jeff, KB1SPH / WQEX694 >> >> >> -- >> From: "Eric Lemmon" >> Sent: Thursday, July 15, 2010 10:24 PM >> To: >> Subject: RE: [Repeater

Re: [Repeater-Builder] TKR-820 CTCSS/DCS EEPROM

DCS has > the ability to read the EEPROM chip as well and send me a copy. > > I hope that clears it up a little more. > > Jeff, KB1SPH / WQEX694 > > > ------ > From: "Eric Lemmon" > Sent: Thursday, July 15, 2010 10:2

Re: [Repeater-Builder] TKR-820 CTCSS/DCS EEPROM

has the ability to read the EEPROM chip as well and send me a copy. I hope that clears it up a little more. Jeff, KB1SPH / WQEX694 -- From: "Eric Lemmon" Sent: Thursday, July 15, 2010 10:24 PM To: Subject: RE: [Repeater-Builder] TKR-820 C

RE: [Repeater-Builder] TKR-820 CTCSS/DCS EEPROM

@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of kb1...@wqex694.info Sent: Thursday, July 15, 2010 7:03 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] TKR-820 CTCSS/DCS EEPROM Ok, I'm playing around with my Kenwood TKR-820 a bit. I've found the instru

Re: [Repeater-Builder] TKR-820 CTCSS/DCS EEPROM

It appears my "L" button doesn't work half the time, guess I need to take my keyboard apart and clean it. Jeff On 7/16/2010, "kb1sph" wrote: > >Ok, I'm playing around with my Kenwood TKR-820 a bit. I've found the >instructions for HEX editing the channel and ctcss information after >reading

[Repeater-Builder] TKR-820 CTCSS/DCS EEPROM

Ok, I'm playing around with my Kenwood TKR-820 a bit. I've found the instructions for HEX editing the channel and ctcss information after reading it from the EEPROM, and they work great. But there's nothing about DCS. I'm wiing to try and decipher how to get the DCS, but I need a look at the in

RE: [Repeater-Builder] TKR-820

nombre de Maire-Radios Enviado el: Lunes, 21 de Septiembre de 2009 04:34 p.m. Para: Repeater-Builder@yahoogroups.com Asunto: Re: [Repeater-Builder] TKR-820 sorry no need a EPROM burner to do the 820's John - Original Message - From: Paul Dumdie <mailto:w9...@sbcgl

Re: [Repeater-Builder] TKR-820

sorry no need a EPROM burner to do the 820's John - Original Message - From: Paul Dumdie To: Repeater-Builder@yahoogroups.com ; Repeater-Builder@yahoogroups.com Sent: Monday, September 21, 2009 7:00 PM Subject: [Repeater-Builder] TKR-820 I have the opertunity t

[Repeater-Builder] TKR-820

I have the opertunity to get a Kenwood TKR-820 repeater. I have the programing cable that works on a TKR-850 and all of the TK mobiles. Will this cable work with a TKR-820? What software works to put the repeater in the ham band? Can the repeater do multi PL or DPL? Thanks! Paul R. Dumdie Jr.

[Repeater-Builder] TKR-820 to CAT-400 blues.

My club got a new CAT-400. YEAH!!! So I am reading the manual in preparation to connect to the TKR-820. I find out that the CAT-400 does not encode or decode CTCSS. BOOO!!! Now what to do? I could connect an external encoder/decoder. I really do not want to do that. Who would have thought a cont

[Repeater-Builder] TKR-820 Repeater

Here is a question a posted yesterday... Any information would be great, thanks! Paul Paul, If you are a member of the Repeater-builder Yahoo group, pose this question to Skipp... IIRC, he is a Kenwood dealer and has come up with an add- on circuit of some type to obtain the "correct" voltages.

[Repeater-Builder] tkr-820

I need someone in the Oklahoma area that can bring the unit down, tunr e in frequency and assist with interfacint my Allstar repeater stuff. I need to use the pins on the accessory jack if you know of how to bring the repeater down on frequency, please E-mail me direct [EMAIL PROTECTED] Your assi

Re: [Repeater-Builder] TKR 820 COR COR logic (and LDG Voter Interface)

alue from some point about 4 volts to another value depending on any other attached devices and/or parts. > >From: [EMAIL PROTECTED] > >Date: 2008/07/04 Fri AM 08:44:51 EDT > >To: Repeater-Builder@yahoogroups.com > >Subject: Re: [Repeater-Builder] TKR 820 > &

Re: [Repeater-Builder] TKR 820

Repeater-Builder@yahoogroups.com Sent: Friday, July 04, 2008 9:38 AM Subject: Re: [Repeater-Builder] TKR 820 The COR signal is opposite. I had to use a transistor invertor circuit to use with the NHRC-2. Then we got an NHRC-7 which has a pos or neg COR switch and that solved it John -- John Mc H

RE: [Repeater-Builder] TKR 820

Replied off-list Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of n9ex_jack Sent: Thursday, July 03, 2008 6:29 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] TKR 820 Hi Guys does anyone out there happen to have a pinout on the

Re: [Repeater-Builder] TKR 820

The COR signal is opposite. I had to use a transistor invertor circuit to use with the NHRC-2. Then we got an NHRC-7 which has a pos or neg COR switch and that solved it John -- John Mc Hugh, K4AG Coordinator for Amateur Radio National Hurricane Center, WX4NHC Home page:- http://www.wx4nhc.o

Re: Re: [Repeater-Builder] TKR 820

make sure it is swinging high and low. High would probably be 5 or more volts and low less than 0.5 volts. 73, ron, n9ee/r >From: [EMAIL PROTECTED] >Date: 2008/07/04 Fri AM 08:44:51 EDT >To: Repeater-Builder@yahoogroups.com >Subject: Re: [Repeater-Builder] TKR 820 >

Re: [Repeater-Builder] TKR 820

does anyone have a controller model they can share as I have been working with a nhrc controller and don't seem to be able to get it to key the repeater. also using rus instead of cor, didn't see a cor signal on this repeater ? suggestions welcome... N9ex Jack In a message dated 7/4/200

Re: [Repeater-Builder] TKR 820

At 04:29 PM 07/03/08, you wrote: >Hi Guys >does anyone out there happen to have a pinout on the accesory connecter >on the back of the machine > >N9ex Google is your friend And the www.repeater-builder.com web site is as well

[Repeater-Builder] TKR 820

Hi Guys does anyone out there happen to have a pinout on the accesory connecter on the back of the machine N9ex

RE: [Repeater-Builder] TKR-820 Reciever Issues

6:33 PM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] TKR-820 Reciever Issues If you are up to removing the eeprom from the front panel (soldered in) and mail it to me I will put it in my kpt20 and verify operation - I have never run into trouble with a UHF repeater. Some

RE: [Repeater-Builder] TKR-820 Reciever Issues

o: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] TKR-820 Reciever Issues If you are up to removing the eeprom from the front panel (soldered in) and mail it to me I will put it in my kpt20 and verify operation - I have never run into trouble with a UHF repeater. Some of th

Re: [Repeater-Builder] TKR-820 Reciever Issues

If you are up to removing the eeprom from the front panel (soldered in) and mail it to me I will put it in my kpt20 and verify operation - I have never run into trouble with a UHF repeater. Some of the TKR720's were borderline, but the TKR820's were OK. You don't have a T band unit or something

RE: [Repeater-Builder] TKR-820 Reciever Issues

, November 21, 2007 5:29 PM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] TKR-820 Reciever Issues Did you calculate the correct LO frequency? Also you may try reversing the high byte and low byte figures of the receive frequency. On 11/21/07, John Barrett <[EMAIL PROTEC

Re: [Repeater-Builder] TKR-820 Reciever Issues

Did you calculate the correct LO frequency? Also you may try reversing the high byte and low byte figures of the receive frequency. On 11/21/07, John Barrett <[EMAIL PROTECTED]> wrote: > > This one is for folks that know the Kenwood TKR-820 repeater J Or how to > modify a VCO frequency range J >

[Repeater-Builder] TKR-820 Reciever Issues

This one is for folks that know the Kenwood TKR-820 repeater :-) Or how to modify a VCO frequency range :-) I have a known working on 451.125/456.125 TKR-820 UHF repeater that I'm attempting to move down to 441.350/446.350. I've got the chip reprogrammed and the transmit VCO had no problems ret

Re: [Repeater-Builder] TKR-820 PL Control

Thanks Eric. At least I understand the "basics" now. John in Tucson - Original Message - From: "Eric Lemmon" <[EMAIL PROTECTED]> To: Sent: Saturday, October 28, 2006 7:52 AM Subject: RE: [Repeater-Builder] TKR-820 PL Control John, Reverse burst is used on

Re: [Repeater-Builder] TKR-820 PL Control

ce contolled by COS. Any help would be appreciated. de WD7F John in Tucson - Original Message - From: "N9WYS" <[EMAIL PROTECTED]> To: Sent: Wednesday, October 25, 2006 5:32 PM Subject: RE: [Repeater-Builder] TKR-820 PL Control John, Do you have the manual for this

Re: [Repeater-Builder] TKR-820 PL Control

Yes, I have the PDF manual. Thanks anyway. de WD7F John in Tucson - Original Message - From: "N9WYS" <[EMAIL PROTECTED]> To: Sent: Wednesday, October 25, 2006 5:32 PM Subject: RE: [Repeater-Builder] TKR-820 PL Control John, Do you have the manual for this repeater

[Repeater-Builder] TKR-820 PL Control

Anyone know offhand if it's possible to control the PL during non-COS transmissions with the TX PLL EN on the TX PLL Unit of the Kenwood TKR-820? Or, does anyone know a tried & true method to perform this task? Thanks, John in Tucson Yahoo! Groups Links <*> To visit your group

RE: [Repeater-Builder] TKR-820 Timeout Timer Problem - Frustrating!

hursday, November 10, 2005 9:24 AM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] TKR-820 Timeout Timer Problem - Frustrating! Hi It sound like you do not have pin #1 in the external connector grounded. It disables the internal controller functions when using an external connecto

[Repeater-Builder] TKR-820 Timeout Timer Problem - Frustrating!

Hi It sound like you do not have pin #1 in the external connector grounded. It disables the internal controller functions when using an external connector. I have an almost identical setup (TKR-820 and Cat 300) and do not have the problem you mentioned. But I do not have the manuals only the te

Re: [Repeater-Builder] TKR-820 Timeout Timer Problem - Frustrating!

: [Repeater-Builder] TKR-820 Timeout Timer Problem - Frustrating! Before you all banish me to the outer reaches of Mongolia - or somewhere else - because of all the questions I keep posing about this machine, please understand that I have tried to research this issue in the technical material I

[Repeater-Builder] TKR-820 Timeout Timer Problem - Frustrating!

Before you all banish me to the outer reaches of Mongolia - or somewhere else - because of all the questions I keep posing about this machine, please understand that I have tried to research this issue in the technical material I have available to me and I keep coming up empty.  This is w

RE: [Repeater-Builder] TKR-820 and the Kenwood KPT-20 Programmer

@yahoogroups.comSubject: [Repeater-Builder] TKR-820 and the Kenwood KPT-20 Programmer Well, everyone, I finally have my external controller (CAT-300) configured and working on this machine.  My next task is to reprogram the frequency and PL options.  I have a KPT-20 programmer, and the manual for it

Re: [Repeater-Builder] TKR-820 and the Kenwood KPT-20 Programmer

Contact me direct, I can guide you to do it, is not a big deal   Juan - Original Message - From: N9WYS To: Repeater-Builder@yahoogroups.com Sent: Friday, May 06, 2005 5:01 PM Subject: [Repeater-Builder] TKR-820 and the Kenwood KPT-20 Programmer

RE: [Repeater-Builder] TKR-820 and the Kenwood KPT-20 Programmer

-820 and the Kenwood KPT-20 Programmer   FYI  462.155 is not a channel in the FCC  list for use in the US.     - Original Message - From: N9WYS To: Repeater-Builder@yahoogroups.com Sent: Friday, May 06, 2005 8:01 PM Subject: [Repeater-Builder] TKR

Re: [Repeater-Builder] TKR-820 and the Kenwood KPT-20 Programmer

FYI  462.155 is not a channel in the FCC  list for use in the US.     - Original Message - From: N9WYS To: Repeater-Builder@yahoogroups.com Sent: Friday, May 06, 2005 8:01 PM Subject: [Repeater-Builder] TKR-820 and the Kenwood KPT-20 Programmer Well

[Repeater-Builder] TKR-820 and the Kenwood KPT-20 Programmer

Well, everyone, I finally have my external controller (CAT-300) configured and working on this machine.  My next task is to reprogram the frequency and PL options.  I have a KPT-20 programmer, and the manual for it (and the repeater), but the programmer manual is not what I would call int

[Repeater-Builder] TKR-820 Controller

OK – I’m still working on this machine, but slowly making progress…   I remember a previous discussion about how to bring controller functions to the accessory plug, but I cannot seem to locate it.  What I want to do is interface an external controller to the repeater.  Can anyone point

Re: [Repeater-Builder] TKR-820 - Adding an External Controller..

quot;   Juan,73 - Mensaje original - De: Steve Grantham Para: Repeater-Builder@yahoogroups.com Enviado: Wednesday, April 14, 2004 2:20 PM Asunto: [Repeater-Builder] TKR-820 - Adding an External Controller.. Does anyone have the pin-outs for the accessory jack on

[Repeater-Builder] TKR-820 - Adding an External Controller..

Does anyone have the pin-outs for the accessory jack on the TKR-820 for adding an external controller? Any hookup tips? Thanks! Steve Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, s