I have several Samba 4 AD controllers set up at multiple sites.
I set up sites and subnets. We have several /24's at each site, but each
site is dedicated a /16, so I set up the Sites Subnets using the /16's.
However, when I log into any system that is joined to the AD domain, it is
Scratch this one, I found that my default site had to DC's in there that
shouldn't have been.
… in DNS. Everything was set up correctly in Sites Subnets, so this one was
kind of hidden buried in DNS.
--
To unsubscribe from this list go to the following URL and read the
instructions:
Hi,
I am trying out Samba4 beta 8 on FreeBSD. For Samba 3, I run smbd and nmbd
with -D -F -S under the supervise utility from djb's daemontools. Stdout
and stderr go to a logging utility and stdin comes from /dev/null.
Running Samba 4 like this always terminates with EOF on stdin.
I can see
All going fine with new RC1, however one suggestion I would make for the
new configure scripts which are much more helpful than the old style
ones, would be to put more of a warning about ACL support being needed
to successfully provision an domain - or make it a configure failure if
this is
On Fri, 2012-09-14 at 22:50 +0100, James Cronin wrote:
All going fine with new RC1, however one suggestion I would make for the
new configure scripts which are much more helpful than the old style
ones, would be to put more of a warning about ACL support being needed
to successfully
On Sat, 2012-08-25 at 14:38 -0700, Matthieu Patou wrote:
On 08/24/2012 11:04 PM, steve wrote:
On 24/08/12 10:47, Rowland Penny wrote:
On 24/08/12 09:28, steve wrote:
Hi
I want to try out the Samba 4 versions of smbd, nmbd and winbindd (not
samba and not as a DC) on a box which I shall
On 24/08/12 10:47, Rowland Penny wrote:
On 24/08/12 09:28, steve wrote:
Hi
I want to try out the Samba 4 versions of smbd, nmbd and winbindd (not
samba and not as a DC) on a box which I shall join to an existing domain.
How do I provision it? Or don't I and just join it using samba tool
domain
On 08/24/2012 11:04 PM, steve wrote:
On 24/08/12 10:47, Rowland Penny wrote:
On 24/08/12 09:28, steve wrote:
Hi
I want to try out the Samba 4 versions of smbd, nmbd and winbindd (not
samba and not as a DC) on a box which I shall join to an existing
domain.
How do I provision it? Or don't I
Hi
I want to try out the Samba 4 versions of smbd, nmbd and winbindd (not
samba and not as a DC) on a box which I shall join to an existing domain.
How do I provision it? Or don't I and just join it using samba tool
domain join?
Cheers,
Steve
--
To unsubscribe from this list go to the
On 24/08/12 09:28, steve wrote:
Hi
I want to try out the Samba 4 versions of smbd, nmbd and winbindd (not
samba and not as a DC) on a box which I shall join to an existing domain.
How do I provision it? Or don't I and just join it using samba tool
domain join?
Cheers,
Steve
Hi Steve,
You
This was a simple memory allocation problem, and entirely my own
fallacy. For details, see
https://lists.samba.org/archive/samba/2012-August/168709.html
Pekka
On 31.7.2012 15:32, Pekka L.J. Jalkanen wrote:
I can't install Samba 4 in practically any fashion.
I've tried Debian packages
A forest contains one or tree, with each tree containing one or more
domains. In an AD, you need at least one forest. You would have
additional branches if you needed a different top level DNS space.
Domains are trusted and trusting. When you install active
directory on a server it will
We're involved in a project that the requirements could be satisfied
with both samba3 and 4. Anyway I am testing what can be done with
Samba4 and after following the tutorial published in the official
wiki, I was able to create my test domain, and join WinXP and Win7
machines to it without a
Horacio
I had a Samba4 (4.0.0beta2-GIT) installation in production, with 40
something workstations with WinXP, Vista y 7 and a couple servers with
windows 2008 and 2003 server. To this time it had worked pretty fine, i
only have some issues related with ACL, some of them more related with
El 23/07/12 10:46, Horacio Lo Brutto escribió:
Yes, in fact that was one of the things I haven't mentioned. We're
going with either to physical servers (nice ones) or with Blades +
VMWare ESXi. We will build a redundant pair of servers.
I am a little concerned about the amount of users /
Is a Forest more than one domain joined?
Cheers,
Steve
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/options/samba
Hello Andrew,
Thanks for your reply.
Yes I could fill in the wiki if I manage to make it work :-)
I'm trying to test the Kerberos configuration with the certificates I
have created
I'm getting this error:
samba4kinit: krb5_pk_enterprise_certs: Failed to find PKINIT
certificate:
On Tue, 2012-07-03 at 12:25 +0300, Charalampos Anargyrou wrote:
Hello Andrew,
Thanks for your reply.
Yes I could fill in the wiki if I manage to make it work :-)
I'm trying to test the Kerberos configuration with the certificates I
have created
I'm getting this error:
Which certificate you mean?
myuser.pem or the Kerberos certificate?
On 7/3/12 12:56 PM, Andrew Bartlett wrote:
On Tue, 2012-07-03 at 12:25 +0300, Charalampos Anargyrou wrote:
Hello Andrew,
Thanks for your reply.
Yes I could fill in the wiki if I manage to make it work :-)
I'm trying to
Hello list,
I have installed and configured a domain with Samba version
4.0.0beta2-GIT-7e80b89 on a CentOS 6.2
I can successfully join a Windows PC in the domain (both Windows XP and
Windows 7 tested)
Now, I am trying to move a step forward and I would like to configure
Samba to accept
On Mon, 2012-07-02 at 17:24 +0300, Charalampos Anargyrou wrote:
Hello list,
I have installed and configured a domain with Samba version
4.0.0beta2-GIT-7e80b89 on a CentOS 6.2
I can successfully join a Windows PC in the domain (both Windows XP and
Windows 7 tested)
Now, I am trying to
On 25/06/12 13:12, Denis Cardon wrote:
Hi Rowland,
Well, after a bit of thought and downloading the kernel source from
Ubuntu, I am answering my own question.
I came across the same issue last week. Actually the newest kernel
(wheezy/ ubuntu 12.04), the /proc/mounts does not show options
Hi Rowland,
Well, after a bit of thought and downloading the kernel source from
Ubuntu, I am answering my own question.
I came across the same issue last week. Actually the newest kernel
(wheezy/ ubuntu 12.04), the /proc/mounts does not show options that are
setup by default in tune2fs
On 21/06/12 12:30, Rowland Penny wrote:
On 21/06/12 10:16, steve wrote:
On 06/21/2012 10:24 AM, Rowland Penny wrote:
On 21/06/12 07:42, steve wrote:
On 06/21/2012 08:27 AM, Andrew Bartlett wrote:
On Wed, 2012-06-20 at 14:17 -0700, todd kman wrote:
Let's start from the top: - Is libacl-dev1
*Sent:* Saturday, June 16, 2012 6:15:40 AM
*Subject:* Re: [Samba] Samba 4 provisioning error on Ubuntu 12.04
On 16/06/12 03:49, Andrew Bartlett wrote:
On Fri, 2012-06-15 at 13:36 +0100, Rowland Penny wrote:
On 15/06/12 12:58, L.P.H. van Belle wrote:
ah from sources...
then .
http
On Wed, 2012-06-20 at 14:17 -0700, todd kman wrote:
Hi Andrew, Rowland.
Thank you for taking the time to answer my questions and offer suggestions.
I had to take a break over the last few days as I needed to put out fires.
Now I am back to the Samba4 server effort.
I am really wanting to
On 06/21/2012 08:27 AM, Andrew Bartlett wrote:
On Wed, 2012-06-20 at 14:17 -0700, todd kman wrote:
Let's start from the top: - Is libacl-dev1 installed on your system?
** I think that should be:
libacl1-dev
Here is the fstab entry on a working 12.04:
UUID=f99d4f08-6123-4941-8ee2-a260d22ddce5 /
On 21/06/12 07:42, steve wrote:
On 06/21/2012 08:27 AM, Andrew Bartlett wrote:
On Wed, 2012-06-20 at 14:17 -0700, todd kman wrote:
Let's start from the top: - Is libacl-dev1 installed on your system?
** I think that should be:
libacl1-dev
Here is the fstab entry on a working 12.04:
On 06/21/2012 10:24 AM, Rowland Penny wrote:
On 21/06/12 07:42, steve wrote:
On 06/21/2012 08:27 AM, Andrew Bartlett wrote:
On Wed, 2012-06-20 at 14:17 -0700, todd kman wrote:
Let's start from the top: - Is libacl-dev1 installed on your system?
** I think that should be:
libacl1-dev
Here is
On 06/21/2012 11:16 AM, steve wrote:
On 06/21/2012 10:24 AM, Rowland Penny wrote:
On 21/06/12 07:42, steve wrote:
On 06/21/2012 08:27 AM, Andrew Bartlett wrote:
On Wed, 2012-06-20 at 14:17 -0700, todd kman wrote:
My Samba4 is installed at /usr/local/bin
No it isn't. It installed at
On 21/06/12 10:16, steve wrote:
On 06/21/2012 10:24 AM, Rowland Penny wrote:
On 21/06/12 07:42, steve wrote:
On 06/21/2012 08:27 AM, Andrew Bartlett wrote:
On Wed, 2012-06-20 at 14:17 -0700, todd kman wrote:
Let's start from the top: - Is libacl-dev1 installed on your system?
** I think that
if this will make this easier to start
with a clean system.
Thanks.
Todd.
From: Rowland Penny rpe...@f2s.com
To: Andrew Bartlett abart...@samba.org
Cc: samba@lists.samba.org
Sent: Saturday, June 16, 2012 6:15:40 AM
Subject: Re: [Samba] Samba 4 provisioning
] Samba 4 provisioning error on Ubuntu 12.04
On 15/06/12 07:20, L.P.H. van Belle wrote:
Hai,
I did this install yesterday, bug is already reported in ubuntu.
This is simple to resolve.
first apt-get build-dep samba4
install these dependecies.
apt-get install samba4
chmod +x /usr/share/samba
] Samba 4 provisioning error on Ubuntu 12.04
On Thu, 2012-06-14 at 16:58 -0300, zoolook wrote:
Hello,
2012/6/14 todd kman tkma...@yahoo.com:
I looked up ACL and how to get them supported and tried
the following:
sudo apt-get install attr
Almost. Install libattr1-dev
We need that, but also
@lists.samba.org
Onderwerp: Re: [Samba] Samba 4 provisioning error on Ubuntu 12.04
On Thu, 2012-06-14 at 16:58 -0300, zoolook wrote:
Hello,
2012/6/14 todd kmantkma...@yahoo.com:
I looked up ACL and how to get them supported and tried
the following:
sudo apt-get install attr
Almost. Install libattr1
-
Van: rpe...@f2s.com [mailto:samba-boun...@lists.samba.org]
Namens Rowland Penny
Verzonden: 2012-06-15 10:41
Aan: samba@lists.samba.org
Onderwerp: Re: [Samba] Samba 4 provisioning error on Ubuntu 12.04
On 15/06/12 07:20, L.P.H. van Belle wrote:
Hai,
I did this install yesterday, bug is already
,
Louis
-Oorspronkelijk bericht-
Van: rpe...@f2s.com [mailto:samba-boun...@lists.samba.org]
Namens Rowland Penny
Verzonden: 2012-06-15 10:41
Aan: samba@lists.samba.org
Onderwerp: Re: [Samba] Samba 4 provisioning error on Ubuntu 12.04
On 15/06/12 07:20, L.P.H. van Belle wrote:
Hai,
I did
in the installer alfa20 to beta1 ( in samba4.sh )
samba-4.0.0beta1.tar.gz
Greetz,
Louis
-Oorspronkelijk bericht-
Van: rpe...@f2s.com [mailto:samba-boun...@lists.samba.org]
Namens Rowland Penny
Verzonden: 2012-06-15 10:41
Aan: samba@lists.samba.org
Onderwerp: Re: [Samba] Samba 4
Hi Chris, Rowland,
Thanks for replying and offering your suggestions.
I tried what you suggested and I made a little progress however I am still
getting an error:
ProvisioningError : our filesystem or build does not support posix ACLs, s3fs
is unworkable in this mode
I looked up ACL and how
Hello,
2012/6/14 todd kman tkma...@yahoo.com:
I looked up ACL and how to get them supported and tried the following:
sudo apt-get install attr
Almost. Install libattr1-dev
HTH,
Norberto
--
To unsubscribe from this list go to the following URL and read the
instructions:
On 14/06/12 20:55, todd kman wrote:
Hi Chris, Rowland,
Thanks for replying and offering your suggestions.
I tried what you suggested and I made a little progress however I am
still getting an error:
ProvisioningError : our filesystem or build does not support posix
ACLs, s3fs is unworkable in
On 06/14/2012 10:22 PM, Rowland Penny wrote:
On 14/06/12 20:55, todd kman wrote:
Hi Chris, Rowland,
sudo apt-get install attr
No. Look at the other reply. You already have attr.
You have to build with libattr1-dev
Maybe the dpkg wasn't built with it?
Try apt-get install libattr1-dev
On Thu, 2012-06-14 at 23:01 +0200, steve wrote:
On 06/14/2012 10:22 PM, Rowland Penny wrote:
On 14/06/12 20:55, todd kman wrote:
Hi Chris, Rowland,
sudo apt-get install attr
No. Look at the other reply. You already have attr.
You have to build with libattr1-dev
Maybe the dpkg
On Thu, 2012-06-14 at 16:58 -0300, zoolook wrote:
Hello,
2012/6/14 todd kman tkma...@yahoo.com:
I looked up ACL and how to get them supported and tried the following:
sudo apt-get install attr
Almost. Install libattr1-dev
We need that, but also libacl1-dev
Andrew Bartlett
--
Andrew
Hello Everyone,
I am used to messing with bind zones directly. With samba 4, I cannot do
that. Is the following the correct way to add a TXT record for SPF to
the zone using samba-tool?
/usr/local/samba/bin/samba-tool dns add s4server.example.org example.org
example.org TXT v=spf1 mx -all
I am
On 2012-06-13 11:21, Trever L. Adams wrote:
Hi Trever,
/usr/local/samba/bin/samba-tool dns add s4server.example.org example.org
example.org TXT v=spf1 mx -all
I am not sure it is because it is showing up with dig as v=spf1 mx
-all where it should be all one string, I believe.
Well, this
On Wed, Jun 13, 2012 at 8:45 PM, Kai Blin k...@samba.org wrote:
On 2012-06-13 11:21, Trever L. Adams wrote:
Hi Trever,
/usr/local/samba/bin/samba-tool dns add s4server.example.org example.org
example.org TXT v=spf1 mx -all
I am not sure it is because it is showing up with dig as v=spf1 mx
Thank you kindly!
--
Sent from my Android phone with K-9 Mail. Please excuse my brevity.
Amitay Isaacs ami...@samba.org wrote:
On Wed, Jun 13, 2012 at 8:45 PM, Kai Blin k...@samba.org wrote:
On 2012-06-13 11:21, Trever L. Adams wrote:
Hi Trever,
/usr/local/samba/bin/samba-tool dns add
On 11/06/12 21:08, todd kman wrote:
My fstab
..
proc /proc proc nodev,noexec,nosuid 0 0
/dev/mapper/server-root / ext4 errors=remount-ro 0 1
UUID=b2d11319-d831-49c6-b3d7-3b566956411a /boot ext2 acl,user_xattr defaults
0 2
/dev/mapper/server-swap_1 none swap sw 0 0
/dev/fd0
Hi all,
I am trying hard to get a Ubuntu server up and running with Samba 4 installed
so it can function as an Activie Directory server in windows network.
I installed 12.04 on a reasonable box and this went well.
I then followed the instructions for getting Samba 4 installed and running.
On Mon, Jun 11, 2012 at 3:08 PM, todd kman tkma...@yahoo.com wrote:
My fstab
..
proc /proc proc nodev,noexec,nosuid 0 0
/dev/mapper/server-root / ext4 errors=remount-ro 0 1
UUID=b2d11319-d831-49c6-b3d7-3b566956411a /boot ext2 acl,user_xattr
defaults 0 2
/dev/mapper/server-swap_1
You can still separate your DC from your file server. You then join the
file server to the domain, and use winbindd (not nss_ldap).
WINS need not be connected, but we need to have certain entries in the
DNS server, and for dynamic DNS registration (which AD clients will want
to do) you will
:
De : Andrew Bartlett abart...@samba.org
A : Stéphane PURNELLE stephane.purne...@corman.be,
Cc : samba@lists.samba.org
Date : 03/06/2012 11:02
Objet : Re: [Samba] Samba 4 analyse
On Wed, 2012-05-30 at 12:29 +0200, Stéphane PURNELLE wrote:
Hi,
My actual config
Samba 3 PDC
On Tue, 2012-06-05 at 09:48 +0200, Stéphane PURNELLE wrote:
But I don't want to separate DC and file server.
And I don't want to redefine my ACL's (I use xfs filesystem).
I have more than 500 Go and many many ACL entries
My interest in samba 4 is GPO and AD protocol nothing else.
is samba
On Wed, 2012-05-30 at 12:29 +0200, Stéphane PURNELLE wrote:
Hi,
My actual config
Samba 3 PDC, file and print server use openldap backend
Posix ACL on XFS FS using pam_ldap and ns_ldap.
independant wins and DNS server (not DDNS)
Can I have same configuration in samba 4 ?
LIke :
Hi,
My actual config
Samba 3 PDC, file and print server use openldap backend
Posix ACL on XFS FS using pam_ldap and ns_ldap.
independant wins and DNS server (not DDNS)
Can I have same configuration in samba 4 ?
LIke :
DC
flie server with posix ACL support and pam, ns_ldap .
independant wins
What's best practice when it comes to changing a samba4 provision,
without screwing current domain objects (users, computers, policy etc)?
If, for example, I wanted to change the DNS from internal to external
bind9, is it just a case of re-running 'provision' with the different
command line
If all you are trying to do is rebuild (or migrate) your DNS without
boffing the rest of your current domain, you should be able to use:
/usr/local/samba/sbin/samba_upgradedns --dns-backend=BIND9_DLZ --verbose
I just used this to convert my flat-file back-end over to DLZ. I DON'T
know if it
On Wed, Apr 4, 2012 at 1:22 PM, Andrew Bartlett abart...@samba.org wrote:
On Fri, 2012-03-30 at 00:02 +0300, George Diamantopoulos wrote:
Hello all,
I've run into the issue described here:
http://lists.samba.org/archive/samba-technical/2010-September/073075.html
To sum it up, I installed
On Fri, 2012-04-06 at 01:08 +0300, George Diamantopoulos wrote:
That might have been the case, after all. FreeNAS AD Web Config has a
non-intuitive field called Host Name (NetBIOS-Name) where I put
ADPDC in at first, then changed it to freenas. I've reinstalled
everything on clean VMs now and
On Fri, Apr 6, 2012 at 1:17 AM, Andrew Bartlett abart...@samba.org wrote:
George,
Sadly I don't follow the freeNAS bug tracker as part of my daily work.
If you or anyone suspects a Samba issue, then raise it in our bugzilla
or on these lists (samba-technical is better for Samba4, at least
On Fri, 2012-04-06 at 01:38 +0300, George Diamantopoulos wrote:
On Fri, Apr 6, 2012 at 1:17 AM, Andrew Bartlett abart...@samba.org wrote:
George,
Sadly I don't follow the freeNAS bug tracker as part of my daily work.
If you or anyone suspects a Samba issue, then raise it in our bugzilla
On Fri, 2012-03-30 at 00:02 +0300, George Diamantopoulos wrote:
Hello all,
I've run into the issue described here:
http://lists.samba.org/archive/samba-technical/2010-September/073075.html
To sum it up, I installed samba4 from git on a debian wheezy system.
Initially, I was able to join
On Wed, Apr 04, 2012 at 08:22:10PM +1000, Andrew Bartlett wrote:
On Fri, 2012-03-30 at 00:02 +0300, George Diamantopoulos wrote:
Hello all,
I've run into the issue described here:
http://lists.samba.org/archive/samba-technical/2010-September/073075.html
To sum it up, I installed
Hello all,
I've run into the issue described here:
http://lists.samba.org/archive/samba-technical/2010-September/073075.html
To sum it up, I installed samba4 from git on a debian wheezy system.
Initially, I was able to join Windows 7 clients to the AD controller.
However, trying to get freenas 8
On Sun, 2012-03-11 at 23:26 -0400, Jason Carlson wrote:
Is SWAT integrated into samba 4? Is it even working?
The swat that is included in Samba 3.6 is available and works just as it
always did, but does not cover AD aspects. There has also been an
effort to build a new swat:
Is SWAT integrated into samba 4? Is it even working?
Blessings,
Jason
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/options/samba
Are you running a version of wbinfo that was compiled with your Samba4
install, or is this one your package manager installed at some point?
It was installed by my package manager but what I don't understand is that
the command getent passwd and getent group did work and enumerated the samba
4
Hi,
My apologies if this is a FAQ that I missed. This is my first attempt
at setting up samba4. Following the howto instructions:
kinit administrator seems to work fine.
samba is latest git (alpha19).
however the join fails (as below):
[root@ads bin]# ./samba-tool domain join
On 2012-02-27 14:13, Alain Toussaint wrote:
Hi Alain,
I configured a domain controller on a ubuntu server using samba 4
alpha 15 using ubuntu's distribution packages and followed this howto:
https://wiki.samba.org/index.php/Samba4/Winbind to have unix account for
domain users but
Hello,
I configured a domain controller on a ubuntu server using samba 4
alpha 15 using ubuntu's distribution packages and followed this howto:
https://wiki.samba.org/index.php/Samba4/Winbind to have unix account for
domain users but winbindd is not running; these two commands from the
On Fri, 2012-02-10 at 19:37 +0100, steve wrote:
samba-tool user add nfs-u
New Password:
ERROR(ldb): Failed to add user 'nfs-u': - operations error at
../source4/dsdb/samdb/ldb_modules/password_hash.c:2163
Anyone?
Thanks,
Steve
Steve,
The best way to sort out an error like this, where
On 02/18/2012 10:31 AM, Andrew Bartlett wrote:
On Fri, 2012-02-10 at 19:37 +0100, steve wrote:
samba-tool user add nfs-u
New Password:
ERROR(ldb): Failed to add user 'nfs-u': - operations error at
../source4/dsdb/samdb/ldb_modules/password_hash.c:2163
Anyone?
Thanks,
Steve
Steve,
The best
Version 4.0.0alpha18-GIT-957ec28
After starting samba -i -d3,
wbinfo -i someuser
gives this:
ldb_wrap open of secrets.ldb
using SPNEGO
Selected protocol [8][NT LANMAN 1.0]
Cannot reach a KDC we require to contact cifs/hh3.site@SITE : kinit for
HH3$@SITE failed (Cannot contact any KDC for
On 01/09/2012 08:42 AM, steve wrote:
Hi
I have a Linux client running XFCE and authenticating against Samba 4.
When trying to return to the session after xscreensaver has kicked in,
authentication fails.
Sorry to bump, but I've just seen this in the xscreensaver doco:
XScreenSaver
On 02/14/2012 06:47 AM, Gémes Géza wrote:
Hi
On 02/13/2012 07:53 PM, Gémes Géza wrote:
Hi,
See comments/questions below:
Hi
When I type this:
getent passwd steve6
steve6:*:315:316:steve6:/home/CACTUS/steve6:/bin/bash
I can see that the info is coming from LDAP by looking at the ldif
On 14/02/12 10:50, steve wrote:
On 02/14/2012 06:47 AM, Gémes Géza wrote:
Hi
On 02/13/2012 07:53 PM, Gémes Géza wrote:
Hi,
See comments/questions below:
Hi
When I type this:
getent passwd steve6
steve6:*:315:316:steve6:/home/CACTUS/steve6:/bin/bash
I can see that the info is coming
Hi
When I type this:
getent passwd steve6
steve6:*:315:316:steve6:/home/CACTUS/steve6:/bin/bash
I can see that the info is coming from LDAP by looking at the ldif for
cn=steve6
When I type this:
wbinfo -i steve6
CACTUS\steve6:*:315:316::/home/CACTUS/steve6:/bin/false
Where is
Hi,
See comments/questions below:
Hi
When I type this:
getent passwd steve6
steve6:*:315:316:steve6:/home/CACTUS/steve6:/bin/bash
I can see that the info is coming from LDAP by looking at the ldif for
cn=steve6
What is your /etc/nsswitch.conf file like?
When I type this:
wbinfo
On 02/13/2012 07:53 PM, Gémes Géza wrote:
Hi,
See comments/questions below:
Hi
When I type this:
getent passwd steve6
steve6:*:315:316:steve6:/home/CACTUS/steve6:/bin/bash
I can see that the info is coming from LDAP by looking at the ldif for
cn=steve6
What is your /etc/nsswitch.conf
On 02/13/2012 08:03 PM, steve wrote:
On 02/13/2012 07:53 PM, Gémes Géza wrote:
Hi,
See comments/questions below:
Hi
When I type this:
getent passwd steve6
steve6:*:315:316:steve6:/home/CACTUS/steve6:/bin/bash
I can see that the info is coming from LDAP by looking at the ldif for
Hi
On 02/13/2012 07:53 PM, Gémes Géza wrote:
Hi,
See comments/questions below:
Hi
When I type this:
getent passwd steve6
steve6:*:315:316:steve6:/home/CACTUS/steve6:/bin/bash
I can see that the info is coming from LDAP by looking at the ldif for
cn=steve6
What is your
On 02/11/2012 12:16 PM, steve wrote:
On 02/11/2012 09:07 AM, steve wrote:
Version 4.0.0alpha18-GIT-389bb4f
Ubuntu 11.10
Provision fails with:
Setting up sam.ldb users and groups
Traceback (most recent call last):
File ./source4/setup/provision, line 262, in module
useeadb=eadb,
Version 4.0.0alpha18-GIT-567f05e
Ubuntu 11.10
Attempting to bind from nss-ldapd:
ldb_wrap open of secrets.ldb
GSS server Update(krb5)(1) Update failed: An unsupported mechanism was
requested: unknown mech-code 0 for mech 1 2 840 113554 1 2 2
The call is from here:
base dc=hh3,dc=site
map
Steve
Ubuntu no longer ships with libreadline5-dev
The apt-get line in the wiki should read:
apt-get install build-essential libattr1-dev libblkid-dev
libgnutls-dev libreadline-gplv2-dev python-dev autoconf
python-dnspython gdb pkg-config bind9utils libpopt-dev
Maybe someone who has a
On 02/12/2012 07:01 PM, Matthieu Patou wrote:
Steve
Ubuntu no longer ships with libreadline5-dev
The apt-get line in the wiki should read:
apt-get install build-essential libattr1-dev libblkid-dev
libgnutls-dev libreadline-gplv2-dev python-dev autoconf
python-dnspython gdb pkg-config
Version 4.0.0alpha18-GIT-389bb4f
Ubuntu 11.10
Provision fails with:
Setting up sam.ldb users and groups
Traceback (most recent call last):
File ./source4/setup/provision, line 262, in module
useeadb=eadb, next_rid=opts.next_rid, lp=lp)
File bin/python/samba/provision/__init__.py, line
On 02/11/2012 09:07 AM, steve wrote:
Version 4.0.0alpha18-GIT-389bb4f
Ubuntu 11.10
Provision fails with:
Setting up sam.ldb users and groups
Traceback (most recent call last):
File ./source4/setup/provision, line 262, in module
useeadb=eadb, next_rid=opts.next_rid, lp=lp)
File
samba-tool user add nfs-u
New Password:
ERROR(ldb): Failed to add user 'nfs-u': - operations error at
../source4/dsdb/samdb/ldb_modules/password_hash.c:2163
Anyone?
Thanks,
Steve
--
To unsubscribe from this list go to the following URL and read the
instructions:
2012-02-08 09:29 keltezéssel, steve írta:
On 07/02/12 20:52, Gémes Géza wrote:
2012-02-07 16:07 keltezéssel, steve írta:
On 07/02/12 12:01, Andrew Bartlett wrote:
On Tue, 2012-02-07 at 10:24 +0100, steve wrote:
I just got this from the mit list:
quote
DES transition
==
The
On 07/02/12 20:52, Gémes Géza wrote:
2012-02-07 16:07 keltezéssel, steve írta:
On 07/02/12 12:01, Andrew Bartlett wrote:
On Tue, 2012-02-07 at 10:24 +0100, steve wrote:
I just got this from the mit list:
quote
DES transition
==
The krb5-1.8 release disables single-DES
On 02/08/2012 01:33 AM, steve wrote:
On 07/02/12 23:45, steve wrote:
This:
https://lists.samba.org/archive/samba-technical/2012-February/081535.html
fixes this:
More dns problems:
samba --version
Version 4.0.0alpha18-GIT-e32ad9b
bin/tdbbackup:
On 2012-02-08 13:19, steve wrote:
Hi Steve,
I've wasted quite a bit of time with cases like this. Would it be
OK for one of us here to subscribe to samba-technical if we promise
not to post?
You're always free to subscribe to samba-technical. You're also free
to post things to samba-technical
On 07/02/12 06:57, Gémes Géza wrote:
2012-02-06 23:58 keltezéssel, steve írta:
On 02/06/2012 08:10 PM, Gémes Géza wrote:
2012-02-06 09:29 keltezéssel, steve írta:
On 02/06/2012 07:19 AM, Gémes Géza wrote:
2012-02-06 01:27 keltezéssel, steve írta:
Hi
I've created a Samba 4 group called
I just got this from the mit list:
quote
DES transition
==
The krb5-1.8 release disables single-DES cryptosystems by default. As
a result, you may need to add the libdefaults setting
allow_weak_crypto = true to communicate with existing Kerberos
infrastructures if they do not
On Tue, 2012-02-07 at 10:24 +0100, steve wrote:
I just got this from the mit list:
quote
DES transition
==
The krb5-1.8 release disables single-DES cryptosystems by default. As
a result, you may need to add the libdefaults setting
allow_weak_crypto = true to communicate
steve@hh3:~/samba-master git pull
Updating bfc7481..e32ad9b
error: Your local changes to the following files would be overwritten by
merge:
auth/common_auth.h
auth/credentials/credentials_ntlm.c
auth/credentials/credentials_samba3.c
snip
source3/lib/util_cmdline.c
Hi,
I use Samba3/OpenLDAP in production and create my users using similar
scripts, so no it shouldn't be difficult, something like:
#!/bin/sh
samba-tool user add $1 ..
echo dn: cn=$1,cn=Users,dc=hh3,dc=site
changetype: modify
add: objectclass
objectclass: posixaccount
-
add:
Hi Geza, hi everyone
I had a go at the script:
s4user cn uid gid windows-group
where windows-group is a posiixGroup'ified group from samba-tool group
add.
cat s4user
#!/bin/sh
echo Creating s4 posix user $1
echo Pls enter pwd for $1
samba-tool user add $1
echo dn: cn=$1,cn=Users,dc=hh3,dc=site
On 07/02/12 12:01, Andrew Bartlett wrote:
On Tue, 2012-02-07 at 10:24 +0100, steve wrote:
I just got this from the mit list:
quote
DES transition
==
The krb5-1.8 release disables single-DES cryptosystems by default. As
a result, you may need to add the libdefaults setting
401 - 500 of 911 matches
Mail list logo
